The role of the active site glutamate in the rearrangement of glutamate to 3-methylaspartate catalyzed by adenosylcobalamin-dependent glutamate mutase

BACKGROUND: Adenosylcobalamin (coenzyme B(12))-dependent enzymes catalyze a variety of chemically difficult reactions that proceed through the generation of free radical intermediates. A long-standing question is how proteins stabilize what are normally regarded as highly reactive organic radicals and direct them towards productive reactions. In glutamate mutase the carboxylate of Glu171 hydrogen bonds with the amino group of the substrate. We have investigated the role of this residue in the enzyme mechanism. RESULTS: Several sterically and functionally conservative mutations were introduced at position 171. In the most impaired mutant, Glu171Gln, k(cat) is reduced 50-fold, although the K(m) for glutamate is little affected. In the wild-type enzyme activity was pH-dependent and the acidic limb of the activity curve titrated with an apparent pK(a) of 6.6 on V(max), whereas for the sluggish Glu171Gln mutant activity is independent of pH. The steady state deuterium kinetic isotope effect is reduced in the mutant enzyme, but the steady state concentration of free radical species on the enzyme (as measured by the steady state concentration of cob(II)alamin) is unaffected by the mutation. CONCLUSIONS: The properties of the mutant proteins are consistent with the hypothesis that Glu171 acts as a general base that serves to deprotonate the amino group of the substrate during catalysis. Deprotonation is expected to facilitate the formation of the glycyl radical intermediate formed during the inter-conversion of substrate and product radicals, but to have little effect on the stability of product or substrate radicals themselves.     

Ab initio QM/MM study of class A beta-lactamase acylation: dual participation of Glu166 and Lys73 in a concerted base promotion of Ser70

Beta-lactamase acquisition is the most prevalent basis for Gram-negative bacteria resistance to the beta-lactam antibiotics. The mechanism used by the most common class A Gram-negative beta-lactamases is serine acylation followed by hydrolytic deacylation, destroying the beta-lactam. The ab initio quantum mechanical/molecular mechanical (QM/MM) calculations, augmented by extensive molecular dynamics simulations reported herein, describe the serine acylation mechanism for the class A TEM-1 beta-lactamase with penicillanic acid as substrate. Potential energy surfaces (based on approximately 350 MP2/6-31+G calculations) reveal the proton movements that govern Ser70 tetrahedral formation and then collapse to the acyl-enzyme. A remarkable duality of mechanism for tetrahedral formation is implicated. Following substrate binding, the pathway initiates by a low energy barrier (5 kcal mol(-1)) and an energetically favorable transfer of a proton from Lys73 to Glu166, through the catalytic water molecule and Ser70. This gives unprotonated Lys73 and protonated Glu166. Tetrahedral formation ensues in a concerted general base process, with Lys73 promoting Ser70 addition to the beta-lactam carbonyl. Moreover, the three-dimensional potential energy surface also shows that the previously proposed pathway, involving Glu166 as the general base promoting Ser70 through a conserved water molecule, exists in competition with the Lys73 process. The existence of two routes to the tetrahedral species is fully consistent with experimental data for mutant variants of the TEM beta-lactamase.     

Autocatalytic Intramolecular Isopeptide Bond Formation in Gram-Positive Bacterial Pili: A QM/MM Simulation

Many Gram-positive pathogens possess external pili or fimbriae with which they adhere to host cells during the infection process. Unusual dual intramolecular isopeptide bonds between Asn and Lys side chains within the N-terminal and C-terminal domains of the pilus subunits have been observed initially in the Streptococcus pyogenes pilin subunit Spy0128 and subsequently in GBS52 from Streptococcus agalactiae, in the BcpA major pilin of Bacillus cereus and in the RrgB pilin of Streptococcus pneumoniae, among others. Within each pilin subunit, intramolecular isopeptide bonds serve to stabilize the protein. These bonds provide a means to withstand large external mechanical forces, as well as possibly assisting in supporting a conformation favored for pilin subunit polymerization via sortase transpeptidases. Genome-wide analyses of pili-containing Gram-positive bacteria are known or suspected to contain isopeptide bonds in pilin subunits. For the autocatalytic formation of isopeptide cross-links, a conservation of three amino acids including Asn, Lys, and a catalytically important acidic Glu (or Asp) residue are responsible. However, the chemical mechanism of how isopeptide bonds form within pilin remains poorly understood. Although it is possible that several mechanistic paths could lead to isopeptide bond formation in pili, the requirement of a conserved glutamate and highly organized positioning of residues within the hydrophobic environment of the active site were found in numerous pilin crystal structures such as Spy0128 and RrgB. This suggests a mechanism involving direct coupling of lysine side chain amine to the asparagine carboxamide mediated by critical acid/base or hydrogen bonding interactions with the catalytic glutamate residue. From this mechanistic perspective, we used the QM/MM minimum free-energy path method to examine the reaction details of forming the isopeptide bonds with Spy0128 as a model pilin, specifically focusing on the role of the glutamate in catalysis. It was determined that the reaction mechanism likely consists of two major steps: the nucleophilic attack on Cγ by nitrogen in the unprotonated Lys ε-amino group and, then two concerted proton transfers occur during the formation of the intramolecular isopeptide bond to subsequently release ammonia. More importantly, within the dual active sites of Spy0128, Glu(117), and Glu(258) residues function as crucial catalysts for each isopeptide bond formation, respectively, by relaying two proton transfers. This work also suggests that domain-domain interactions within Spy0128 may modulate the reactivity of residues within each active site. Our results may hopefully shed light on the molecular mechanisms of pilin biogenesis in Gram-positive bacteria.     

How does the cAMP-dependent protein kinase catalyze the phosphorylation reaction: an ab initio QM/MM study

We have carried out density functional theory QM/MM calculations on the catalytic subunit of cAMP-dependent protein kinase (PKA). The QM/MM calculations indicate that the phosphorylation reaction catalyzed by PKA is mainly dissociative, and Asp166 serves as the catalytic base to accept the proton delivered by the substrate peptide. Among the key interactions in the active site, the Mg(2+) ions, glycine rich loop, and Lys72 are found to stabilize the transition state through electrostatic interactions. On the other hand, Lys168, Asn171, Asp184, and the conserved waters bound to Mg(2+) ions do not directly contribute to lower the energy barrier of the phosphorylation reaction, and possible roles for these residues are proposed. The QM/MM calculations with different QM/MM partition schemes or different initial structures yield consistent results. In addition, we have carried out 12 ns molecular dynamics simulations on both wild type and K168A mutated PKA, respectively, to demonstrate that the catalytic role of Lys168 is to keep ATP and substrate peptide in the near-attack reactive conformation.     

Elucidation of the Mechanistic Pathways of the Hydroxyl Radical Scavenging Reaction by Daidzein Using Hybrid QM/MM Dynamics

Employing a hybrid QM/MM simulation we explored the reaction dynamics of the hydroxyl radical scavenging activity of daidzein, a soy isoflavone. Our simulations illustrate that the highly reactive hydroxyl radical can participate in hydrogen abstraction reaction with both OH functional groups of daidzein and can form stable daidzein radicals. We found that the reaction involving the 4'-OH site of daidzein is energetically favorable over the other reaction pathway involving the 7-OH site of daidzein by ～29 kcal/mol. The high enthalpic stabilization involved in daidzein radical formation at the 4'-OH site can be partly attributed to better solvation through hydrogen-bonding interactions with water and higher electron density delocalization of radical over the adjacent aromatic ring. As evident from the QM/MM dynamics, both HAT pathways led to formation of ketones at the 7-OH and 4'-OH sites of daidzein, respectively, and the adjacent aromatic rings appear in a p-quinonoid form, a highly stable resonating structure. The suitability of the QM/MM methodology to study the reaction mechanism, identification of intermediate states, and pathways of flavonoid radical stabilization reported here opens up a new possibility to study a similar reaction mechanism in other systems.     

Peptide hydrolysis catalyzed by matrix metalloproteinase 2: a computational study

The MMP-2 reaction mechanism is investigated by using different computational methodologies. First, quantum mechanical (QM) calculations are carried out on a cluster model of the active site bound to an Ace-Gly approximately Ile-Nme peptide. Along the QM reaction path, a Zn-bound water molecule attacks the Gly carbonyl group to give a tetrahedral intermediate. The breaking of the C-N bond is completed thanks to the Glu 404 residue that shuttles a proton from the water molecule to Ile-N atom. The gas-phase QM energy barrier is quite low ( approximately 14 kcal/mol), thus suggesting that the essential catalytic machinery is included in the cluster model. A similar reaction path occurs in the MMP-2 catalytic domain bound to an octapeptide substrate according to hybrid QM and molecular mechanical (QM/MM) geometry optimizations. However, the rupture of the Gly( P 1) approximately Ile( P 1') amide bond is destabilized in the static QM/MM calculations, owing to the positioning of the Ile( P 1') side chain inside the MMP-2 S 1' pocket and to the inability of simple energy miminization methodologies to properly relax complex systems. Molecular dynamics simulations show that these steric limitations are overcome easily through structural fluctuations. The energetic effect of structural fluctuations is taken into account by combining QM energies with average MM Poisson-Boltzmann free energies, resulting in a total free energy barrier of 14.8 kcal/mol in good agreement with experimental data. The rate-determining event in the MMP-2 mechanism corresponds to a H-bond rearrangement involving the Glu 404 residue and/or the Glu 404-COOH --> N-Ile( P 1') proton transfer. Overall, the present computational results and previous experimental data complement each other well in order to provide a detailed view of the MMPs catalytic mechanism.     

All electron quantum chemical calculation of the entire enzyme system confirms a collective catalytic device in the chorismate mutase reaction

To elucidate the catalytic power of enzymes, we analyzed the reaction profile of Claisen rearrangement of Bacillus subtilis chorismate mutase (BsCM) by all electron quantum chemical calculations using the fragment molecular orbital (FMO) method. To the best of our knowledge, this is the first report of ab initio-based quantum chemical calculations of the entire enzyme system, where we provide a detailed analysis of the catalytic factors that accomplish transition-state stabilization (TSS). FMO calculations deliver an ab initio-level estimate of the intermolecular interaction between the substrate and the amino acid residues of the enzyme. To clarify the catalytic role of Arg90, we calculated the reaction profile of the wild-type BsCM as well as Lys90 and Cit90 mutant BsCMs. Structural refinement and the reaction path determination were performed at the ab initio QM/MM level, and FMO calculations were applied to the QM/MM refined structures. Comparison between three types of reactions established two collective catalytic factors in the BsCM reaction: (1) the hydrogen bonds connecting the Glu78-Arg90-substrate cooperatively control the stability of TS relative to the ES complex and (2) the positive charge on Arg90 polarizes the substrate in the TS region to gain more electrostatic stabilization.     

The reaction mechanism of hydroxyethylphosphonate dioxygenase: a QM/MM study

By employing ab initio quantum mechanical/molecular mechanical (QM/MM) and molecular dynamics (MD) simulations, we have provided further evidence against the previously proposed hydroperoxylation or hydroxylation mechanism of hydroxyethylphosphonate dioxygenase (HEPD). HEPD employs an interesting catalytic cycle based on concatenated bifurcations. The first bifurcation is based on the abstraction of hydrogen atoms from the substrate, which leads to a distal or proximal hydroperoxo species (Fe-OOH or Fe-(OH)O). The second and the third bifurcations refer to the carbon-carbon bond cleavage reaction. And this is achieved through a tridentate intermediate, or employing a proton-shuttle assisted mechanism, in which the residue Glu(176) or the Fe(IV)=O group serves as a general base. The reaction directions seem to be tunable and show significant environment dependence. This mechanism can provide a comprehensive interpretation for the seemingly contradicting experimental evidences and provide insight into the development of biochemistry and material sciences.     

Mechanisms of antibiotic resistance: QM/MM modeling of the acylation reaction of a class A beta-lactamase with benzylpenicillin

Understanding the mechanisms by which beta-lactamases destroy beta-lactam antibiotics is potentially vital in developing effective therapies to overcome bacterial antibiotic resistance. Class A beta-lactamases are the most important and common type of these enzymes. A key process in the reaction mechanism of class A beta-lactamases is the acylation of the active site serine by the antibiotic. We have modeled the complete mechanism of acylation with benzylpenicillin, using a combined quantum mechanical and molecular mechanical (QM/MM) method (B3LYP/6-31G+(d)//AM1-CHARMM22). All active site residues directly involved in the reaction, and the substrate, were treated at the QM level, with reaction energies calculated at the hybrid density functional (B3LYP/6-31+Gd) level. Structures and interactions with the protein were modeled by the AM1-CHARMM22 QM/MM approach. Alternative reaction coordinates and mechanisms have been tested by calculating a number of potential energy surfaces for each step of the acylation mechanism. The results support a mechanism in which Glu166 acts as the general base. Glu166 deprotonates an intervening conserved water molecule, which in turn activates Ser70 for nucleophilic attack on the antibiotic. This formation of the tetrahedral intermediate is calculated to have the highest barrier of the chemical steps in acylation. Subsequently, the acylenzyme is formed with Ser130 as the proton donor to the antibiotic thiazolidine ring, and Lys73 as a proton shuttle residue. The presented mechanism is both structurally and energetically consistent with experimental data. The QM/MM energy barrier (B3LYP/ 6-31G+(d)//AM1-CHARMM22) for the enzymatic reaction of 9 kcal mol(-1) is consistent with the experimental activation energy of about 12 kcal mol(-1). The effects of essential catalytic residues have been investigated by decomposition analysis. The results demonstrate the importance of the "oxyanion hole" in stabilizing the transition state and the tetrahedral intermediate. In addition, Asn132 and a number of charged residues in the active site have been identified as being central to the stabilizing effect of the enzyme. These results will be potentially useful in the development of stable beta-lactam antibiotics and for the design of new inhibitors.     

Combined QM(DFT)/MM molecular dynamics simulations of the deamination of cytosine by yeast cytosine deaminase (yCD)

Extensive combined quantum mechanical (B3LYP/6‐31G*) and molecular mechanical (QM/MM) molecular dynamics simulations have been performed to elucidate the hydrolytic deamination mechanism of cytosine to uracil catalyzed by the yeast cytosine deaminase (yCD). Though cytosine has no direct binding to the zinc center, it reacts with the water molecule coordinated to zinc, and the adjacent conserved Glu64 serves as a general acid/base to shuttle protons from water to cytosine. The overall reaction consists of several proton‐transfer processes and nucleophilic attacks. A tetrahedral intermediate adduct of cytosine and water binding to zinc is identified and similar to the crystal structure of yCD with the inhibitor 2‐pyrimidinone. The rate‐determining step with the barrier of 18.0 kcal/mol in the whole catalytic cycle occurs in the process of uracil departure where the proton transfer from water to Glu64 and nucleophilic attack of the resulting hydroxide anion to C2 of the uracil ring occurs synchronously. © 2016 Wiley Periodicals, Inc.     

Theoretical studies on the hydrolysis of phosphate diesters in the gas phase,solution, and RNase A

Density functional theory, polarizable continuum models and semiempirical hybrid quantum mechanical/molecular mechanical (QM/MM) calculations were applied to the hydrolysis of phosphate diesters in the gas phase, in solution, and in the enzyme RNase A. Neutralization of the negative charge of the pentacovalent phosphorane intermediates provides a substantial stabilization of the transition‐state structures in the gas phase. Inclusion of solvent effects on the phosphate/phosphorane species was critical to reproducing the trends in reactivity observed experimentally. Finally, the catalytic mechanism for the hydrolysis of uridine 2′,3′‐cyclic phosphate by RNase A was studied by QM/MM calculations. Our results suggest that the rate‐limiting transition state of the reaction corresponds to the approach of a water molecule to the phosphate and its activation by His119. Thus, His119 acts as a generalized base for the reaction. The water attack leads to a pentacovalent phosphorane transition state of formal charge ?2; this excess of negative charge in the transition state is stabilized by a number of positively charged residues including His12 and Lys41. In the second stage of the reaction, the phosphorane is converted into products. This part of the reaction proceeds without a detectable barrier, and it is facilitated by a proton transfer from Lys41 to the departing O_2′. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

pKa calculations in solution and proteins with QM/MM free energy perturbation simulations: a quantitative test of QM/MM protocols

The accuracy of biological simulations depends, in large part, on the treatment of electrostatics. Due to the availability of accurate experimental values, calculation of pKa provides stringent evaluation of computational methods. The generalized solvent boundary potential (GSBP) and Ewald summation electrostatic treatments were recently implemented for combined quantum mechanical and molecular mechanics (QM/MM) simulations by our group. These approaches were tested by calculating pKa shifts due to differences in electronic structure and electrostatic environment; the shifts were determined for a series of small molecules in solution, using various electrostatic treatments, and two residues (His 31, Lys 102) in the M102K T4-lysozyme mutant with large pKa shifts, using the GSBP approach. The calculations utilized a free energy perturbation scheme with the QM/MM potential function involving the self-consistent charge density functional tight binding (SCC-DFTB) and CHARMM as the QM and MM methods, respectively. The study of small molecules demonstrated that inconsistent electrostatic models produced results that were difficult to correct in a robust manner; by contrast, extended electrostatics, GSBP, and Ewald simulations produced consistent results once a bulk solvation contribution was carefully chosen. In addition to the electrostatic treatment, the pKa shifts were also sensitive to the level of the QM method and the scheme of treating QM/MM Coulombic interactions; however, simple perturbative corrections based on SCC-DFTB/CHARMM trajectories and higher level single point energy calculations were found to give satisfactory results. Combining all factors gave a root-mean-square difference of 0.7 pKa units for the relative pKa values of the small molecules compared to experiment. For the residues in the lysozyme, an accurate pKa shift was obtained for His 31 with multiple nanosecond simulations. For Lys 102, however, the pKa shift was estimated to be too large, even after more than 10 nanosecond simulations for each lambda window; the difficulty was due to the significant, but slow, reorganization of the protein and water structure when Lys 102 was protonated. The simulations support that Lys 102 is deprotonated in the X-ray structure and the protein is highly destabilized when this residue is protonated.     

Role of the catalytic triad and oxyanion hole in acetylcholinesterase catalysis: an ab initio QM/MM study

The initial step of the acylation reaction catalyzed by acetylcholinesterase (AChE) has been studied by a combined ab initio quantum mechanical/molecular mechanical (QM/MM) approach. The reaction proceeds through the nucleophilic addition of the Ser203 O to the carbonyl C of acetylcholine, and the reaction is facilitated by simultaneous proton transfer from Ser203 to His447. The calculated potential energy barrier at the MP2(6-31+G) QM/MM level is 10.5 kcal/mol, consistent with the experimental reaction rate. The third residue of the catalytic triad, Glu334, is found to be essential in stabilizing the transition state through electrostatic interactions. The oxyanion hole, formed by peptidic NH groups from Gly121, Gly122, and Ala204, is also found to play an important role in catalysis. Our calculations indicate that, in the AChE-ACh Michaelis complex, only two hydrogen bonds are formed between the carbonyl oxygen of ACh and the peptidic NH groups of Gly121 and Gly122. As the reaction proceeds, the distance between the carbonyl oxygen of ACh and NH group of Ala204 becomes smaller, and the third hydrogen bond is formed both in the transition state and in the tetrahedral intermediate.     

Towards the Accurate Thermodynamic Characterization of Enzyme Reaction Mechanisms

We employed QM/MM molecular dynamics (MD) simulations to characterize the rate-limiting step of the glycosylation reaction of pancreatic α-amylase with combined DFT/molecular dynamics methods (PBE/def2-SVP : AMBER). Upon careful choice of four starting active site conformations based on thorough reactivity criteria, Gibbs energy profiles were calculated with umbrella sampling simulations within a statistical convergence of 1–2 kcal ⋅ mol⁻¹. Nevertheless, Gibbs activation barriers and reaction energies still varied from 11.0 to 16.8 kcal ⋅ mol⁻¹ and −6.3 to +3.8 kcal ⋅ mol⁻¹ depending on the starting conformations, showing that despite significant state-of-the-art QM/MM MD sampling (0.5 ns/profile) the result still depends on the starting structure. The results supported the one step dissociative mechanism of Asp197 glycosylation preceded by an acid-base reaction by the Glu233, which are qualitatively similar to those from multi-PES QM/MM studies, and thus support the use of the latter to determine enzyme reaction mechanisms.     

Catalytic mechanism of 6-phosphogluconate dehydrogenase: a theoretical investigation

Density functional calculations are employed to theoretically explore the mechanism of all elementary reaction steps involved in the catalytic reaction of 6-phosphogluconate dehydrogenase (6PGDH). The model systems we choose for the enzyme contain the essential parts of the cofactor (NADP+), the substrate 6-phosphogluconate (6PG), and some key residues (Lys183 and Glu190) in the active site of sheep liver 6PGDH. The effect of the apoenzyme electrostatic environment on the studied reaction is treated by the self-consistent reaction-field method. Our calculations demonstrate that the first step of the catalytic reaction is the formation of a 3-keto 6PG intermediate, which proceeds through a concerted transition state involving a hydride transfer from 6PG to NADP+, and a proton transfer from 6PG to Lys183. The second step is the elimination of a CO2 molecule from 6-PG, concomitant with a proton transfer from Lys183 to 6-PG. In the final step, a concerted double proton transfer (one from Glu190 to the substrate, another from the substrate to Lys183) results in the final product, the keto form of ribulose 5-phosphate (Ru5P). The rate-limiting step is the formation of a 3-keto 6PG intermediate, with a free energy barrier of 22.7 kcal/mol at room temperature in the protein environment, and all three steps are calculated to be thermodynamically favorable. These results are in good agreement with the general acid/general base mechanism suggested from previous experiments for the 6PGDH reaction.     

Interfacing Q-Chem and CHARMM to perform QM/MM reaction path calculations

A hybrid quantum mechanical/molecular mechanical (QM/MM) potential energy function with Hartree-Fock, density functional theory (DFT), and post-HF (RIMP2, MP2, CCSD) capability has been implemented in the CHARMM and Q-Chem software packages. In addition, we have modified CHARMM and Q-Chem to take advantage of the newly introduced replica path and the nudged elastic band methods, which are powerful techniques for studying reaction pathways in a highly parallel (i.e., parallel/parallel) fashion, with each pathway point being distributed to a different node of a large cluster. To test our implementation, a series of systems were studied and comparisons were made to both full QM calculations and previous QM/MM studies and experiments. For instance, the differences between HF, DFT, MP2, and CCSD QM/MM calculations of H2O...H2O, H2O...Na+, and H2O...Cl- complexes have been explored. Furthermore, the recently implemented polarizable Drude water model was used to make comparisons to the popular TIP3P and TIP4P water models for doing QM/MM calculations. We have also computed the energetic profile of the chorismate mutase catalyzed Claisen rearrangement at various QM/MM levels of theory and have compared the results with previous studies. Our best estimate for the activation energy is 8.20 kcal/mol and for the reaction energy is -23.1 kcal/mol, both calculated at the MP2/6-31+G(d)//MP2/6-31+G(d)/C22 level of theory.     

Acetylcholinesterase: mechanisms of covalent inhibition of wild-type and H447I mutant determined by computational analyses

The reaction mechanisms of two inhibitors TFK+ and TFK0 binding to both the wild-type and H447I mutant mouse acetylcholinesterase (mAChE) have been investigated by using a combined ab initio quantum mechanical/molecular mechanical (QM/MM) approach and classical molecular dynamics (MD) simulations. In the wild-type mAChE, the binding reactions of TFK+ and TFK0 are both spontaneous processes, which proceed through the nucleophilic addition of the Ser203-Ogamma to the carbonyl-C of TFK+ or TFK0, accompanied with a simultaneous proton transfer from Ser203 to His447. No barrier is found along the reaction paths, consistent with the experimental reaction rates approaching the diffusion-controlled limit. By contrast, TFK+ binding to the H447I mutant may proceed with a different reaction mechanism. A water molecule takes over the role of His447 and participates in the bond breaking and forming as a "charge relayer". Unlike in the wild-type mAChE case, Glu334, a conserved residue from the catalytic triad, acts as a catalytic base in the reaction. The calculated energy barrier for this reaction is about 8 kcal/mol. These predictions await experimental verification. In the case of the neutral ligand TFK0, however, multiple MD simulations on the TFK0/H447I complex reveal that none of the water molecules can be retained in the active site as a "catalytic" water. Furthermore, our alchemical free energy calculation also suggests that the binding of TFK0 to H447I is much weaker than that of TFK+. Taken together, our computational studies confirm that TFK0 is almost inactive in the H447I mutant and also provide detailed mechanistic insights into the experimental observations.     

Two Sides of Quantum-Based Modeling of Enzyme-Catalyzed Reactions: Mechanistic and Electronic Structure Aspects of the Hydrolysis by Glutamate Carboxypeptidase

We report the results of a computational study of the hydrolysis reaction mechanism of N-acetyl-l-aspartyl-l-glutamate (NAAG) catalyzed by glutamate carboxypeptidase II. Analysis of both mechanistic and electronic structure aspects of this multistep reaction is in the focus of this work. In these simulations, model systems are constructed using the relevant crystal structure of the mutated inactive enzyme. After selection of reaction coordinates, the Gibbs energy profiles of elementary steps of the reaction are computed using molecular dynamics simulations with ab initio type QM/MM potentials (QM/MM MD). Energies and forces in the large QM subsystem are estimated in the DFT(PBE0-D3/6-31G**) approximation. The established mechanism includes four elementary steps with the activation energy barriers not exceeding 7 kcal/mol. The models explain the role of point mutations in the enzyme observed in the experimental kinetic studies; namely, the Tyr552Ile substitution disturbs the “oxyanion hole”, and the Glu424Gln replacement increases the distance of the nucleophilic attack. Both issues diminish the substrate activation in the enzyme active site. To quantify the substrate activation, we apply the QTAIM-based approaches and the NBO analysis of dynamic features of the corresponding enzyme-substrate complexes. Analysis of the 2D Laplacian of electron density maps allows one to define structures with the electron density deconcentration on the substrate carbon atom, i.e., at the electrophilic site of reactants. The similar electronic structure element in the NBO approach is a lone vacancy on the carbonyl carbon atom in the reactive species. The electronic structure patterns revealed in the NBO and QTAIM-based analyses consistently clarify the reactivity issues in this system.     

Mechanistic Insights into a Stibene Cleavage Oxygenase NOV1 from Quantum Mechanical/Molecular Mechanical Calculations

NOV1, a stilbene cleavage oxygenase, catalyzes the cleavage of the central double bond of stilbenes to two phenolic aldehydes, using a 4-His Fe(II) center and dioxygen. Herein, we use in-protein quantum mechanical/molecular mechanical (QM/MM) calculations to elucidate the reaction mechanism of the central double bond cleavage of phytoalexin resveratrol by NOV1. Our results showed that the oxygen molecule prefers to bind to the iron center in a side-on fashion, as suggested from the experiment. The quintet Fe−O₂ complex with the side-on superoxo antiferromagnetic coupled to the resveratrol radical is identified as the reactive oxygen species. The QM/MM results support the dioxygenase mechanism involving a dioxetane intermediate with a rate-limiting barrier of 10.0 kcal mol⁻¹. The alternative pathway through an epoxide intermediate is ruled out due to a larger rate-limiting barrier (26.8 kcal mol⁻¹). These findings provide important insight into the catalytic mechanism of carotenoid cleavage oxygenases and also the dioxygen activation of non-heme enzymes.