Transfert du trichloréthylène en milieu poreux à partir d'un panache de vapeursMass transfer of trichloroethylene in a porous medium from a vapor plume

A large scale experiment has been carried out on an experimental facility to study the mass transfer of trichloroethylene (TCE) in a partially saturated porous medium. 5 liters of TCE have been infiltrated in the vadose zone of the site. The mass transfer of TCE from the vapor plume in the unsaturated zone towards the top of groundwater was quantified based on an analytical and a numerical approach. The mass of the pollutant measured at the exit of the model is well represented by the two mathematical approaches. It is found that the transfer of TCE towards the groundwater from the vapor plume is weak, which corresponds to 285 g of TCE, approximately 4% of the initial mass. To cite this article: H. Benremita, G. Schäfer, C. R. Mecanique 331 (2003).     

Elastic properties of glasses: a multiscale approach

Very different materials are named ‘Glass’, with Young's modulus E and Poisson's ratio ν extending from 5 to 180 GPa and from 0.1 to 0.4, respectively, in the case of bulk inorganic glasses. Glasses have in common the lack of long range order in the atomic organization. Beside the essential role of elastic properties for materials selection in mechanical design, we show in this analysis that macroscopical elastic characteristics (E,ν) provide an interesting way to get insight into the short- and medium-range orders existing in glasses. In particular, ν, the packing density (C_g) and the glass network dimensionality appear to be strongly correlated. Networks consisting primarily of chains and layers units (chalcogenides, low Si-content silicate glasses) correspond to ν>0.25 and C_g>0.56, with maximum values observed for metallic glasses (ν0.4 and C_g>0.7). On the contrary, ν<0.25 is associated to a highly cross-linked network with a tri-dimensional organization resulting in a low packing density. Moreover, the temperature dependence of the elastic moduli brings a new light on the ‘fragility’ of glasses (as introduced by Angell) and on the level of cooperativity of atomic movements at the source of the deformation process. To cite this article: T. Rouxel, C. R. Mecanique 334 (2006).     

On two-scale homogenized equations of the Ishlinskii type viscoelastoplastic body longitudinal vibrations with rapidly oscillating nonsmooth data

We study the initial-boundary value problems for a system of operator-differential equations describing Ishlinskii type viscoelastoplastic body longitudinal vibrations with rapidly oscillating nonsmooth coefficients and initial data. The main feature is an presence of hysteresis Prandtl–Ishlinskii operator. We rigorously justify the passage to the corresponding limit initial-boundary value problems for a system of two-scale homogenized operator-integro-differential equations, including the existence theorem for the limit problems. The results are global with respect to the time interval and the data. To cite this article: A. Amosov, I. Goshev, C. R. Mecanique 334 (2006).     

Vérification expérimentale de la relation de réciprocité d'Onsager pour l'électro-osmose et l'électro-filtration dans une argile naturelleExperimental verification of the Onsager's reciprocal relations for electro-osmosis and electro-filtration phenomena on a saturated clay

This Note is devoted to the experimental verification of the Onsager's reciprocal relations in the particular case of electro-osmosis and electro-filtration. A special set up has been designed to carry out the measurements of both the electro-osmotic permeability and the streaming potential. This has been performed by using a natural material i.e., saturated kaolinite. To cite this article: K. Beddiar et al., C. R. Mecanique 330 (2002) 893–898.     

Computing Green's function of elasticity in a half-plane with impedance boundary condition

This Note presents an effective and accurate method for numerical calculation of the Green's function G associated with the time harmonic elasticity system in a half-plane, where an impedance boundary condition is considered. The need to compute this function arises when studying wave propagation in underground mining and seismological engineering. To theoretically obtain this Green's function, we have drawn our inspiration from the paper by Durán et al. (2005), where the Green's function for the Helmholtz equation has been computed. The method consists in applying a partial Fourier transform, which allows an explicit calculation of the so-called spectral Green's function. In order to compute its inverse Fourier transform, we separate as a sum of two terms. The first is associated with the whole plane, whereas the second takes into account the half-plane and the boundary conditions. The first term corresponds to the Green's function of the well known time-harmonic elasticity system in (cf. J. Dompierre, Thesis). The second term is separated as a sum of three terms, where two of them contain singularities in the spectral variable (pseudo-poles and poles) and the other is regular and decreasing at infinity. The inverse Fourier transform of the singular terms are analytically computed, whereas the regular one is numerically obtained via an FFT algorithm. We present a numerical result. Moreover, we show that, under some conditions, a fourth additional slowness appears and which could produce a new surface wave. To cite this article: M. Durán et al., C. R. Mecanique 334 (2006).     

Variance of the virtual displacement

We show that the affine structure of the 3-dimensional space is deeply enmeshed with the static laws expression. The relevance of tensorial rules for calculus in mechanics is thus enhanced. The virtual work principle is stated precisely but a little twist is given to the usual statements: the tensorial nature of the so-called virtual displacement vector is asserted to be covariant. To cite this article: C. Vallée et al., C. R. Mecanique 332 (2004).

Résumé

Nous montrons que la structure affine de l'espace tridimensionnel est fortement imbriquée avec l'expression des lois de la statique. La pertinence de l'application des règles du calcul tensoriel à la mécanique est ainsi renforcée. Le principe des travaux virtuels est établi précisément avec une seule entorse aux exposés classiques : la nature tensorielle de l'habituel vecteur déplacement virtuel est affirmée covariante. Pour citer cet article : C. Vallée et al., C. R. Mecanique 332 (2004).     

Extended three-dimensional digital image correlation (X3D-DIC)

A correlation algorithm is proposed to measure full three-dimensional displacement fields in a three-dimensional domain. The chosen kinematic basis for this measurement is based on continuous finite-element shape functions. It is furthermore proposed to account for the presence of strong discontinuities, similarly to extended finite element schemes, with a suited enrichment of the kinematics with discontinuities supported by a (crack) surface. An optimization of the surface geometry is proposed based on correlation residuals. The procedure is applied to analyze one loading cycle of a fatigue-cracked nodular graphite cast iron sample by using computed tomography pictures. Subvoxel crack openings are revealed and measured. To cite this article: J. Réthoré et al., C. R. Mecanique 336 (2008).     

Large-Eddy Simulation of transcritical flows

The present study uses the LES code AVBP, developed at CERFACS, to simulate transcritical flows. Real gas effects are accounted for by the use of a cubic equation of state, in conjunction with appropriate viscosity and thermal conductivity coefficients. First a single nitrogen round jet at supercritical pressure injected in a gaseous reservoir is simulated. Two cases are considered, one demonstrating a transcritical injection (high density injection), the other being directly injected at supercritical temperature (lower density injection). Comparison with available measurements shows good agreement. Finally, the simulation of a reacting case from the Mascotte bench (ONERA) is performed, consisting in a single coaxial injector injecting transcritical oxygen and supercritical hydrogen in a 60 bar chamber. Mean flow characteristics are in good agreement with the experimental observations of OH^* emission, whereas temperature comparisons are more difficult to interpret. To cite this article: T. Schmitt et al., C. R. Mecanique 337 (2009).     

A DES method applied to a Backward Facing Step reactive flow

Hybrid Reynolds Averaged Navier Stokes–Large Eddy Simulation is a trend which is becoming of common use in aerodynamics but has seldom been employed to simulate reactive flows. Such methods, like the Delayed Detached Eddy Simulation (DDES) presented in this article, have been created to treat near wall flows with a RANS approach while switching to LES in the separated flow region. It is indeed an affordable solution to simulate complex and unsteady compressible flows and to have access to accurate skin friction and wall thermal fluxes. In order to validate this technique in combustion, we chose a simple and well documented Backward Facing Step combustor. To account for turbulent combustion a Dynamic Thickened Flame was used. The results obtained on this case show a good agreement with the experimental database and are of the same quality as LES in the separated region for both inert and reactive flows. To cite this article: B. Sainte-Rose et al., C. R. Mecanique 337 (2009).     

Experimental observation of frequency doubling in a viscoelastic mixing layer

An experimental mixing layer in water at Reynolds number 440 is investigated. A colored viscoelastic solution is introduced in the shear layer before the roll-up dynamics. On the basis of flow visualization and local velocity measurements, it is found that compared to the Newtonian case, the roll-up process is affected by the non-Newtonian behavior of the viscoelastic solution. The effect consists of the appearance of secondary eddies in the mixing layer corresponding to the production of higher harmonics in the vorticity distribution. Consequently, there is a frequency doubling of the local velocity oscillations in the mixing layer. To cite this article: F. Sausset et al., C. R. Mecanique 332 (2004).

Résumé

Une étude expérimentale de la couche de mélange à un nombre de Reynolds de 440 est réalisée. Une solution viscoélastique colorée est introduite dans la couche cisaillée stationnaire juste avant la formation des tourbillons. En utilisant un mesure locale de la vitesse et une technique de visualisation par fluorescence, il est montré que la formation tourbillonnaire est affectée par le comportement non-Newtonien de la solution viscoélastique par rapport au cas Newtonien. Cet effet correspond à la formation de tourbillons secondaires produisant un harmonique supérieur dans la répartition spatiale de vorticité. En conséquence, un doublement de la fréquence des oscillations de la vitesse locale dans la couche de mélange est observé. Pour citer cet article : F. Sausset et al., C. R. Mecanique 332 (2004).     

Direct numerical simulation and global stability analysis of three-dimensional instabilities in a lid-driven cavity

The first bifurcation in a lid-driven cavity characterized by three-dimensional Taylor–Görtler-Like instabilities is investigated for a cubical cavity with spanwise periodic boundary conditions at Re=1000. The modes predicted by a global linear stability analysis are compared to the results of a direct numerical simulation. The amplification rate, and the shape of the three-dimensional perturbation fields from the direct numerical simulation are in very good agreement with the characteristics of the steady S1 mode from the stability analysis, showing that this mode dominates the other unstable unsteady modes. To cite this article: J. Chicheportiche et al., C. R. Mecanique 336 (2008).     

Physical and perceptual estimation of differences between loudspeakers

Differentiating the restitution of timbre by several loudspeakers may result from standard measurements, or from listening tests. This work proposes a protocol keeping a close relationship between the objective and perceptual evaluations: the stimuli are musical excerpts, and the measuring environment is a standard listening room. The protocol involves recordings made at a listener position, and objective dissimilarities are computed using an auditory model simulating masking effects. The resulting data correlate very well with listening tests using the same recordings, and show similar dependencies on the major parameters identified from the dissimilarity matrices. To cite this article: M. Lavandier et al., C. R. Mecanique 334 (2006).     

Edge singularities and structure of the 3-D Williams expansion

The elastic solution in a vicinity of a re-entrant wedge can be described by a Williams like expansion in terms of powers of the distance to a point on the edge. This expansion has a particular structure due to the invariance of the problem by translation parallel to the edge. We show here that some terms, so-called primary solutions, derive directly from solutions to the 2-D corner problem posed in the orthogonal cross section of the domain. The others, baptized shadow functions, derive of the primary solutions by integration along the axis parallel to the edge. This 3-D Williams expansion is shown to be equivalent to the edge expansion proposed by Costabel et al. [M. Costabel, M. Dauge, Z. Yosibash, A quasidual function method for extracting edge stress intensity functions, SIAM J. Math. Anal. 35 (5) (2004) 1177–1202]. To cite this article: T. Apel et al., C. R. Mecanique 336 (2008).     

Chemical kinetics modeling and LES combustion model effects on a perfectly premixed burner

Chemical kinetics modeling and coupling with turbulent combustion models for compressible Large Eddy Simulations (LES) is a critical issue. Accurate flow predictions can only be guaranteed if the coupling is well mastered. In a first attempt to qualify the effect of each model, the case of a lean premixed swirled combustor with comprehensive measures is targeted (species mass fractions and temperature fields). For the investigation, two turbulent combustion models are considered. The first model relies on a presumed PDF approach coupled to a look-up chemistry table obtained with a reduced chemical scheme. The second model makes use of the thickened flame approach using the same reduced chemical scheme but with reaction rates computed explicitly as the computation advances. Then, to estimate kinetic schemes reduction effects, the first model is compared to a third one, with the same PDF approach, but coupled to a look-up chemistry table obtained with a complete chemical scheme. All LES are very close to each other. The main difference between the different predictions relies on CO mass fractions. Although they are all able to return good outlet mass fractions, CO values inside the flame are different depending on the model used. To cite this article: G. Albouze et al., C. R. Mecanique 337 (2009).     

Nonlinear behavior of matrix-inclusion composites under high confining pressure: application to concrete and mortar

This paper is devoted to a micromechanics-based simulation of the response of concrete to hydrostatic and oedometric compressions. Concrete is described as a composite made up of a cement matrix in which rigid inclusions are embedded. The focus is put on the role of the interface between matrix and inclusion which represent the interfacial transition zone (ITZ). A plastic behavior is considered for both the matrix and the interfaces. The effective response of the composite is derived from the modified secant method adapted to the situation of imperfect interfaces. To cite this article: T.H. Le et al., C. R. Mecanique 336 (2008).     

Chaos synchronization on the N-torus and cryptography

A class of chaotic dynamical systems on the N-dimensional torus is proposed for masking some information in secure communications. The information is then recovered thanks to a chaos synchronization process. To cite this article: L. Rosier et al., C. R. Mecanique 332 (2004).

Résumé

Nous proposons une classe de systèmes chaotiques sur le tore N-dimensionnel pour masquer une information à transmettre dans une communication sécurisée. Cette information est ensuite reconstruite à l'aide d'un mécanisme de synchronisation du chaos. Pour citer cet article : L. Rosier et al., C. R. Mecanique 332 (2004).     

Numerical analysis of a quasistatic piezoelectric problem with damage

The quasistatic evolution of the mechanical state of a piezoelectric body with damage is numerically studied in this paper. Both damage and piezoelectric effects are included into the model. The variational formulation leads to a coupled system composed of two linear variational equations for the displacement field and the electric potential, and a nonlinear parabolic variational equation for the damage field. The existence of a unique weak solution is stated. Then, a fully discrete scheme is introduced by using a finite element method to approximate the spatial variable and an Euler scheme to discretize the time derivatives. Error estimates are derived on the approximate solutions, from which the linear convergence of the algorithm is deduced under suitable regularity conditions. Finally, a two-dimensional example is presented to demonstrate the behaviour of the solution. To cite this article: J.R. Fernández et al., C. R. Mecanique 336 (2008).