Electron transport in coumarin-dye-sensitized nanocrystalline TiO2 electrodes

We investigated electron transport kinetics in terms of electron diffusion coefficient (D) and electron lifetime (tau) in coumarin-dye-sensitized nanocrystalline TiO2 electrodes by intensity-modulated photocurrent spectroscopy (IMPS) and intensity-modulated photovoltage spectroscopy (IMVS). We found that the values of tau for coumarin-dye-sensitized TiO2 electrodes were much shorter than that for an electrode coated with a Ru complex (N719 dye), suggesting that the back-electron-transfer process corresponding to recombination between conduction-band electrons in the TiO2 and I3- ions in the electrolyte occurs more easily in coumarin-dye-sensitized solar cells. In addition, the values of tau depended on the kind of coumarin dye, each of which has a different number of thiophene moieties, suggesting that the molecular structure of the adsorbed dyes also affects the kinetics of electron transport in the TiO2 electrodes.     

CdSe/TiO2 nanocrystalline solar cells

CdSe sensitized TiO₂ nanocrystalline solar cells were made with the participation of silicotungstic acid (STA) during the deposition of CdSe, the resulting Voc and Isc were 0.23 V cm^-2 and 10 mA cm^-2, respectively. The doping, time and microporous membrane effects were also discussed.     

Effect of the rutile content on the photovoltaic performance of the dye-sensitized solar cells composed of mixed-phase TiO2 photoelectrodes

The effect of the rutile content on the photovoltaic performance of dye-sensitized solar cells (DSSCs) composed of mixed-phase TiO(2) photoelectrode has been investigated. The mixed-phase TiO(2) particles with varied amounts of rutile, relative to anatase phase, are synthesized by an in situ method where the concentration of sulfate ion is used as a phase-controlling parameter in the formation of TiO(2) using TiCl(4) hydrolysis. The surface area (S(BET)) varies from 33 (pure rutile) to 165 (pure anatase) m(2) g(-1). Generally, both the current density (J(sc)) and photo-conversion efficiency (η) decrease as the rutile content increases. The incorporation of rod-shaped rutile particles causes low uptake of dye due to the reduced surface area, as well as slow electron transport in less efficiently-stacked structure. However, maximum J(sc) (14.63 mA cm(-2)) and η (8.69%) appear when relatively low rutile content (16%) is employed. The reported synergistic effect by the efficient interparticle electron transport from rutile to anatase seems to overbalance the decrease of surface area when small amount of rutile particles is incorporated.     

Cyclometalated ruthenium complexes for sensitizing nanocrystalline TiO2 solar cells

Cyclometalated ruthenium complexes of [Ru(C--arrow--N) (N--N--N)] configuration are a promising new class of molecular sensitizers for dye-sensitized solar cells, as a result of their broad and red-shifted visible absorption in comparison to the analogous [Ru(N--N--N)2] type coordinative complexes.     

Effect of coadsorbent on the photovoltaic performance of zinc pthalocyanine-sensitized solar cells

The effect of chenodeoxycholic acid as a coadsorbent on TiO 2 nanocrystalline solar cells incorporating phthalocyanine sensitizers was studied under various conditions. Adding chenodeoxycholic acid onto TiO 2 nanoparticles not only reduces the adsorption of phthalocyanine sensitizers but also prevents sensitizer aggregation, leading to different photovoltaic performance. The inspection of IPCE and absorption spectra showed that the load of phthalocyanine sensitizers is strongly dependent on the molar concentration of chenodeoxycholic acid coadsorbent. The open circuit voltage of the solar cells with chenodeoxycholic acid coadsorbent increases due to the enhanced electron lifetime in TiO 2 nanoparticles coupled with the band edge shift of TiO 2 to negative potentials.     

Effect of coadsorbent properties on the photovoltaic performance of dye-sensitized solar cells

Stearic acid as a coadsorbent, which has a low dipole moment and high solubility, retarded the rate of dye adsorption during the competitive anchoring process on the TiO(2) layer in dye-sensitized solar cells (DSCs), thereby increasing the content of strongly bound dye on the TiO(2) surface. This resulted in an approximately 25% improvement in both J(SC) and the power conversion efficiency of the DSCs, even for much lower dye coverage.     

Effect of additives on the photovoltaic properties of organic solar cells based on triphenylamine-containing amorphous molecules

Photovoltaic performance of the organic solar cells(OSCs)based on 2-((5′-(4-((4-((E)-2-(5′-(2,2-dicyanovinyl)-3′,4-dihexyl-2,2′-bithiophen-5-yl)vinyl)phenyl)(phenyl)amino)styryl)-4,4′-dihexyl-2,2′-bithiophen-5-yl)methylene)malononitrile(L(TPAbTV-DCN))as donor and PC70BM as acceptor was optimized using 0.25 vol%high boiling point solvent additive of1-chloronaphthalene(CN),1,6-hexanedithiol(HDT),or 1,8-diodooctane(DIO).The optimized OSC based on L(TPA-bTVDCN)–PC70BM(1:2,w/w)with 0.25 vol%CN exhibits an enhanced power conversion efficiency(PCE)of 2.61%,with Voc of0.87 V,Jsc of 6.95 mA/cm2,and FF of 43.2%,under the illumination of 100 mW/cm2 AM 1.5 G simulated solar light,whereas the PCE of the OSC based on the same active layer without additive is only 1.79%.The effect of the additive on absorption spectra and the atomic force microscopy images of L(TPA-bTV-DCN)–PC70BM blend films were further investigated.The improved efficiency of the device could be ascribed to the enhanced absorption and optimized domain size in the L(TPA-bTV-DCN)–PC70BM blend film.     

Enhancement of photovoltaic performance of polyaniline/graphene composite-based dye-sensitized solar cells by adding TiO2 nanoparticles

Polyaniline (PANi)-graphene composites and polyaniline-graphene/TiO₂ composites were prepared by ex-situ approach. Systematic investigation was carried out to explore photovoltaic (PV) properties of PANi-graphene and PANi-graphene/TiO₂ composite. The prepared composites were characterized using X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Raman Spectroscopy and Ultraviolet–Visible (UV–Vis) Spectroscopy. The PV properties of dye-sensitized solar cells (DSSCs) prepared composites investigated by assembling materials in ITO/PANi-graphene/Al and ITO/PANi-graphene/TiO₂/Al architecture. Different PV parameters such as short circuit current, open circuit voltage, fill factor and power conversion efficiency were determined from the (Current-Voltage) IV characteristics of PV cell. The 15 wt% PANi loaded graphene composite based PV cell shows optimized power conversion efficiency of the order 6.47%. The main accomplishment of present work is that efficiency associated with 15 wt% PANi loaded graphene composite, improved further by addition of TiO₂ nanoparticles. The composite system between PANi-graphene/TiO₂ for 1 wt% of TiO₂ nanoparticles shows optimized power conversion efficiency of the order 8.63%.     

The effects of pyridine derivative additives on interface processes at nanocrystalline TiO2 thin film in dye‐sensitized solar cells

2‐Methyl‐4‐propoxypyridine, a new pyridine derivative, has been synthesized and used as an additive in the liquid electrolyte of dye‐sensitized solar cells (DSSCs). Compared with 2‐methylpyridne and 4‐tert‐pyridine, they were employed to study the influence of the pyridine derivative additives on the rate of recombination at the electrode/dye/electrolyte interfaces and band edge shift of TiO₂, which were measured by time‐resolved mid‐infrared absorption spectroscopy and Mott–Schottky analysis, respectively. It was found that the rate of interfacial charge recombination was enhanced when the pyridine derivative additives were present in the electrolyte. Meanwhile, the additives caused a negative shift of the band edge. However, the net effect of pyridine derivative addition was to improve the open‐circuit photovoltage according to the photoelectrochemical measurement, indicating that negative shift of conduction band of TiO₂ was a predominant factor in improving the open‐circuit photovoltage. Also, the result was strongly supported by the dark current measurement. Therefore, it provides a microscopic account for the function of the pyridine derivative additives on the open‐circuit photovoltage enhancement of the DSSCs. Furthermore, the decrease of the short‐circuit photocurrent of the cells was also attributed to the slower dye regeneration due to the addition of additives from the results of cyclic voltammetry measurement. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of chemical structure of interface modifier of TiO2 on photovoltaic properties of poly(3-hexylthiophene)/TiO2 layered solar cells

Two classes of phosphonic acid-bearing organic molecules, 2-oligothiophene phosphonic acid and omega-(2-thienyl)alkyl phosphonic acid were adopted as interface modifiers (IMs) of the TiO(2) surface, to increase its compatibility with poly(3-hexylthiophene) (P3HT). The self-assembled monolayers of these molecules on titania surface were characterized by making contact angle measurements and X-ray photoelectron spectroscopy (XPS). Atomic force microscopic (AFM) images revealed that the adsorption of IMs effectively smooths the TiO(2) surface. Both photoluminescence (PL) spectroscopy and PL lifetime measurements were made to investigate the photoinduced properties of the TiO(2)/IM/P3HT layered-junction. The PL quenching efficiency increased with the number of thiophene rings and as the alkyl chain-length in IMs decreased. Meanwhile, the decline in the PL lifetime followed a similar trend as the PL quenching efficiency. Additionally, the power conversion efficiency (PCE) of the ITO/TiO(2)/IM/P3HT/Au devices was examined by measuring their photocurrent density-applied voltage (J-V) curves. The experimental results indicated that the short-circuit current density (J(SC)) increased with the number of thiophene units and as the hydrocarbon chain-length in IMs decreased. However, the open-circuit voltage (V(OC)) of the devices slightly fell as the energy level of the highest occupied molecular orbital (HOMO) of IM decreased. The PCE of the device with 2-terthiophene phosphonic acid was 2.5 times that of the device with 10-(2-thienyl)decyl phosphonic acid.     

Influence of a TiCl4 post-treatment on nanocrystalline TiO2 films in dye-sensitized solar cells

In this study, the influence of the TiCl(4) post-treatment on nanocrystalline TiO(2) films as electrodes in dye-sensitized solar cells is investigated and compared to nontreated films. As a result of this post-treatment cell efficiencies are improved, due to higher photocurrents. On a microscopic scale TiO(2) particle growth on the order of 1 nm is observed. Despite a corresponding decrease of BET surface area, more dye is adsorbed onto the oxide surface. Although it seems trivial to match this finding with the improved photocurrent, this performance improvement cannot be attributed to higher dye adsorption only. This follows from comparison between incident photon to current conversion efficiency (IPCE) and light absorption characteristics. Since the charge transport properties of the TiO(2) films are already more than sufficient without treatment, the increase in short circuit current density J(SC) cannot be related to improvements in charge transport either. Transient photocurrent measurements indicate a shift in the conduction band edge of the TiO(2) upon TiCl(4) treatment. It is concluded that the main contribution to enhanced current originates from this shift in conduction band edge, resulting in improved charge injection into the TiO(2).     

Effect of hole-transporting materials on the photovoltaic performance and stability of all-ambient-processed perovskite solar cells

High-efficiency perovskite solar cells(PSCs) reported hitherto have been mostly prepared in a moisture and oxygen-free glove-box atmosphere, which hampers upscaling and real-time performance assessment of this exciting photovoltaic technology. In this work, we have systematically studied the feasibility of allambient-processing of PSCs and evaluated their photovoltaic performance. It has been shown that phasepure crystalline tetragonal MAPbI_3 perovskite films are instantly formed in ambient air at room temperature by a two-step spin coating process, undermining the need for dry atmosphere and post-annealing.All-ambient-processed PSCs with a configuration of FTO/TiO_2/MAPbI_3/Spiro-OMeTAD/Au achieve opencircuit voltage(990 mV) and short-circuit current density(20.31 mA/cm~2) comparable to those of best reported glove-box processed devices. Nevertheless, device power conversion efficiency is still constrained at 5% by the unusually low fill-factor of 0.25. Dark current–voltage characteristics reveal poor conductivity of hole-transporting layer caused by lack of oxidized spiro-OMe TAD species, resulting in high seriesresistance and decreased fill-factor. The study also establishes that the above limitations can be readily overcome by employing an inorganic p-type semiconductor, copper thiocyanate, as ambient-processable hole-transporting layer to yield a fill-factor of 0.54 and a power conversion efficiency of 7.19%. The present findings can have important implications in industrially viable fabrication of large-area PSCs.     

Effect of a coadsorbent on the performance of dye-sensitized TiO2 solar cells: shielding versus band-edge movement

The mechanism by which the adsorbent chenodeoxycholate, cografted with a sensitizer onto TiO2 nanocrystals, alters the open-circuit photovoltage and short-circuit current of dye-sensitized solar cells was investigated. The influence of tetrabutylammonium chenodeoxycholate on dye loading was studied under a variety of conditions in which the TiO2 films were exposed to the sensitizing dye and coadsorbent. Photocurrent--voltage measurements combined with desorption studies revealed that adding chenodeoxycholate reduces the dye loading by as much as 60% while having a relatively small effect on the short-circuit photocurrent. Calculations along with measurements showed that even at low loading, enough dye is present to absorb a significant fraction of the incident light in the visible spectrum. In concurrence with the observations of others, we find evidence for weakly and strongly adsorbed forms of the dye resulting from either different binding conformations or aggregates. The most strongly adsorbed dyes are less susceptible to displacement by chenodeoxycholate than those that are weakly adsorbed. While having no observable effect on dye coverage, multiple exposures of a TiO2 film to a dye solution substantially increased the fraction of strongly adsorbed dye as judged by the resistance of the adsorbed dye to displacement by chenodeoxycholate. Measurements of the open-circuit voltage as a function of the photocharge density, determined by infrared transmittance, showed that chenodeoxycholate not only shifts the conduction band edge to negative potentials, but also significantly increases the rate of recombination. The net effect of adding chenodeoxycholate is, however, to improve the photovoltage.     

Ellipsoidal TiO2 hierarchitectures with enhanced photovoltaic performance

Hierarchical TiO(2) ellipsoids 250-500 nm in size have been synthesized on a large scale by a template-free hydrothermal route. The submicrometer-sized hierarchitectures are assembled from highly crystallized anatase nanorods about 17 nm in diameter with macroporous cavities on the outer shells. Based on the time-dependent morphological evolution under hydrothermal conditions, an oriented attachment process is proposed to explain formation of the hierarchical structures. Such hierarchical TiO(2) not only adsorbs large amounts of dye molecules due to high surface area, but also shows good light scattering caused by the submicrometer size. The TiO(2) hierarchitectures were deposited on top of a transparent TiO(2) nanocrystalline main layer to construct a double-layered photoanode for dye-sensitized solar cell (DSC) application, exhibiting enhanced light harvesting and power-conversion efficiency compared to a commercial TiO(2)-based electrode.     

Scattering spherical voids in nanocrystalline TiO2- enhancement of efficiency in dye-sensitized solar cells

Spherical voids as light scattering centers in nanocrystalline TiO2 films were realized with polystyrene particles of diameter 400 nm, thus enhancing the photovoltaic performance by 25% on large areas, as well as providing an indication that these films can be used with electrolytes of higher viscosity.     

Charge transport versus recombination in dye-sensitized solar cells employing nanocrystalline TiO2 and SnO2 films

We report a comparison of charge transport and recombination dynamics in dye-sensitized solar cells (DSSCs) employing nanocrystalline TiO(2) and SnO(2) films and address the impact of these dynamics upon photovoltaic device efficiency. Transient photovoltage studies of electron transport in the metal oxide film are correlated with transient absorption studies of electron recombination with both oxidized sensitizer dyes and the redox couple. For all three processes, the dynamics are observed to be 2-3 orders of magnitude faster for the SnO(2) electrode. The origins of these faster dynamics are addressed by studies correlating the electron recombination dynamics to dye cations with chronoamperometric studies of film electron density. These studies indicate that the faster recombination dynamics for the SnO(2) electrodes result both from a 100-fold higher electron diffusion constant at matched electron densities, consistent with a lower trap density for this metal oxide relative to TiO(2), and from a 300 mV positive shift of the SnO(2) conduction band/trap states density of states relative to TiO(2). The faster recombination to the redox couple results in an increased dark current for DSSCs employing SnO(2) films, limiting the device open-circuit voltage. The faster recombination dynamics to the dye cation result in a significant reduction in the efficiency of regeneration of the dye ground state by the redox couple, as confirmed by transient absorption studies of this reaction, and in a loss of device short-circuit current and fill factor. The importance of this loss pathway was confirmed by nonideal diode equation analyses of device current-voltage data. The addition of MgO blocking layers is shown to be effective at reducing recombination losses to the redox electrolyte but is found to be unable to retard recombination dynamics to the dye cation sufficiently to allow efficient dye regeneration without resulting in concomitant losses of electron injection efficiency. We conclude that such a large acceleration of electron dynamics within the metal oxide films of DSSCs may in general be detrimental to device efficiency due to the limited rate of dye regeneration by the redox couple and discuss the implications of this conclusion for strategies to optimize device performance.     

固态TiO2纳米太阳电池研究进展

本文介绍了固态TiO2纳米太阳电池的结构和工作有理，对近年来全固态纳米太阳电池，纳米TiO2膜、染料敏化剂的研究进展进行了综述。     

Engineering of efficient panchromatic sensitizers for nanocrystalline TiO(2)-based solar cells.

A new series of panchromatic ruthenium(II) sensitizers derived from carboxylated terpyridyl complexes of tris-thiocyanato Ru(II) have been developed. Black dye containing different degrees of protonation [(C(2)H(5))(3)NH][Ru(H(3)tcterpy)(NCS)(3)] 1, [(C(4)H(9))(4)N](2)[Ru(H(2)tcterpy)(NCS)(3)] 2, [(C(4)H(9))(4)N](3)[Ru(Htcterpy)(NCS)(3)] 3, and [(C(4)H(9))(4)N](4)[Ru(tcterpy)(NCS)(3)] 4 (tcterpy = 4,4',4' '-tricarboxy-2,2':6',2' '-terpyridine) have been synthesized and fully characterized by UV-vis, emission, IR, Raman, NMR, cyclic voltammetry, and X-ray diffraction studies. The crystal structure of complex 2 confirms the presence of a Ru(II)N6 central core derived from the terpyridine ligand and three N-bonded thiocyanates. Intermolecular H-bonding between carboxylates on neighboring terpyridines gives rise to 2-D H-bonded arrays. The absorption and emission maxima of the black dye show a bathochromic shift with decreasing pH and exhibit pH-dependent excited-state lifetimes. The red-shift of the emission maxima is due to better pi-acceptor properties of the acid form that lowers the energy of the CT excited state. The low-energy metal-to-ligand charge-transfer absorption band showed marked solvatochromism due to the presence of thiocyanate ligands. The Ru(II)/(III) oxidation potential of the black dye and the ligand-based reduction potential shifted cathodically with decreasing number of protons and showed more reversible character. The adsorption of complex 3 from methoxyacetonitrile solution onto transparent TiO(2) films was interpreted by a Langmuir isotherm yielding an adsorption equilibrium constant, K(ads), of (1.0 +/- 0.3) x 10(5) M(-1). The amount of dye adsorbed at monolayer saturation was (n(alpha) = 6.9 +/- 0.3) x 10(-)(8) mol/mg of TiO(2), which is around 30% less than that of the cis-di(thiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) complex. The black dye, when anchored to nanocrystalline TiO(2) films achieves very efficient sensitization over the whole visible range extending into the near-IR region up to 920 nm, yielding over 80% incident photon-to-current efficiencies (IPCE). Solar cells containing the black dye were subjected to analysis by a photovoltaic calibration laboratory (NREL, U.S.A.) to determine their solar-to-electric conversion efficiency under standard AM 1.5 sunlight. A short circuit photocurrent density obtained was 20.5 mA/cm(2), and the open circuit voltage was 0.72 V corresponding to an overall conversion efficiency of 10.4%.