Determination of nitrite as pentafluorobenzyl derivative by RP-HPLC and UV detection with and without ion-pair extraction

Summary A reversed-phase high-performance liquid chromatographic (RP-HPLC) method with UV detection (270 nm) for the determination of nitrite as its pentafluorobenzyl derivative with and without ion-pair extraction is described. Ion-pair extraction of nitrite from aqueous solutions was performed by using a 1 mol/l solution of the liquid ion exchanger methyltrioctylammonium chloride in toluene. The residue of the ion-pair extraction or an aliquot of an aqueous nitrite solution or of a biological fluid (100 l) were treated with 400 l of acetone and 10 l of pentafluorobenzyl bromide. Nitrite was converted into its pentafluorobenzyl derivative by heating at 50°C for 90 min. After evaporation of acetone the aqueous phases were diluted with 100 to 400 l of methanol, and up to 100 l were injected into the RP-HPLC system. The method allows accurate analysis of nitrite in the presence of nitrate directly in aqueous solutions and biological fluids in concentrations down to 2.0 mg/l. The method is also applicable to the determination of nitrate following its reduction to nitrite by cadmium.     

Certified reference materials (CRM 408 and 409) for quality control of main components (ammonium, calcium, hydronium, magnesium, nitrate, potassium, sodium and sulphate) in simulated rain water

Analyses of rainwater are routinely performed by a number of organisations to monitor the contribution from rainwater to the component occurrences in the environment and the acidification of the environment. To control the quality of such determinations, the Community Bureau of Reference (BCR) has organised a certification campaign to produce two simulated rainwater reference materials (CRM 408, low mineral content and CRM 409, high mineral content). The materials were carefully prepared (addition of pro analysis and supra pure reagents with the mentioned elements to silica-free deionised water) and its homogeneity and long-term stability were verified. The materials were certified for their contents of ammonium (106 mol/kg) (CRM 409), calcium (7.68 and 15.5 mol/kg), chloride (67.3 and 113 mol/kg), hydronium (16.6 and 48.0 mol/kg), magnesium (6.14 and 12.3 mol/kg), nitrate (20.1 and 78.1 mol/kg), potassium (4.25 mol/kg) (CRM 409), sodium (42.0 and 82.9 mol/kg) and sulphate (10.5 and 53.2 mol/kg). Indicative values (not certified) are given for ammonium and potassium in CRM 408. This paper presents the certification work performed, as well as the analytical work for the certification of the contents of relevant species.     

Simultaneous ion-chromatography of alkali, alkaline earth and heavy metal ions with conductivity and indirect UV detection: Comparison of eluents containing organic complexing acids and copper sulfate

Summary The simultaneous ion-chromatography of mono-and divalent metal ions on the weak cation-exchange column Nucleosil-PBDMA (polymer coated silica with polybutandiene-maleic acid) with conductivity and indirect UV-detection is presented. The influences of eluents containing organic complexing acids (-hydroxy-isobutyric, tartaric, citric, oxalic, pyridine-2,6-dicarbonic acid and EDTA etc.) as well as UV-absorbing, displacing counterions [Cu(II), Ce(III) etc.] on the retention times of metal ions was investigated in detail. With the combination of citric acid-PDCA as eluent all alkali and alkaline earth ions could be completely separated within 12 min. Alkali, alkaline earth and heavy metal ions [Cu/Zn/Co/Fe(II)] were separated by the combination of tartaric and oxalic acid as eluent in a single run. Trace amounts of Na, K and Ca were successfully separated from the Mg-matrix by an EDTA-PDCA eluent. For the IC with indirect UV-detection the eluent consisting of CuSO₄ or CuCl₂ was used to separate Na, K, Mg and Ca with baseline resolution within 10 min.The detection limits of metal ions with conductivity detection were found beween 0.5 g/l for Li and 8 g/l for Cs. They were 10 times more sensitive than those with indirect UV-detection.This IC-method was applied to determine alkali, alkaline earth and Mn ions in the water, food, ore-cinder and sole-brine samples with satisfactory results.Dedicated to Prof. Dr. G. Schulze on the occasion of his 60th birthday     

Determination of traces of sodium alkylbenzenesulphonate by high-performance liquid chromatography. Application to water

Summary For the trace determination of sodium alkylbenzenesulphonate (ABS) by HPLC the following conditions were employed: Shimadzu ZORBAX SIL Column (5 m, 4.6 mm i.d. x 150 mm) as stationary phase, 0.2% ammoniaethanol (v/v) as mobile phase, UV detector at 225 nm, injection volume 12 l. The chromatograms of ABS were simple and sharp (detection limit of ABS 0.02 g in 12 l of ethanol). The calibration curves of ABS were linear in a concentration range of 0.03 0.3 g in 12 l of ethanol. In the case of linear sodium dodecylbenzenesulphonate positive errors of 1 4% were caused by non-ionic surfactants or laurylsulphate (6 times excess), 10 50% positive errors were caused by 2 6 times excess of household detergents.Standard water samples containing ABS were treated with a weak base anion-exchange resin, the adsorbed ABS were eluted, and then determined either by HPLC or by the methylene blue spectrophotometric method. Recoveries of ABS in water were about 92 107% by HPLC.

---

Bestimmung von Spuren Natriumalkylbenzolsulfonat mit Hilfe der HPLC. Anwendung auf Wasser

Zusammenfassung Für die Spurenbestimmung von Natriumalkylbenzolsulfonat (ABS) durch HPLC werden die folgenden Bedingungen empfohlen:Shimadzu ZORBAX SIL (5 m, 4,6 mm x 150 mm) als stationäre Phase, 0,2% Ammoniak/Ethanol als mobile Phase, UV-Detektor bei 225 nm, Injektionsvolumen 12 l. Die erhaltenen Chromatogramme sind einfach und scharf (Nachweisgrenze 0,02 g in 12 ml Ethanol). Die Eichkurven sind im Konzentrationsbereich von 0,03–0,3 g in 12 l Ethanol linear. Im Falle des linearen Natriumdodecylbenzolsulfonats werden bei Anwesenheit von nicht-ionischen oberflächenaktiven Substanzen oder von Laurylsulfat in 6fachem Überschuß positiver Fehler von 1–4% erhalten; bei 2–6fachem Überschuß von Haushaltswaschmitteln ergeben sich positive Fehler von 10–50%.Standard-Wasserproben werden zunächst einer Behandlung mit einem Anionenaustauscher unterzogen, die adsorbierten ABS eluiert und durch HPLC oder nach der Methylenblaumethode analysiert. Wiederfindungsraten liegen bei 92–107%.

     

Synthesis,characterization and crystal structures of heterometallic trinuclear carbonyl sulfido clusters (η5-Cp)MoFeCo- (CO)8(μ3-S) and [(η5-Cp)Mo]2Fe(CO)7(μ3-S)

HFe2Co(CO)9(3-S) reacts with (5-Cp)Mo(CO)3Cl in refluxing THF to give heterometallic trinuclear clusters (5-Cp)MoFeCo(CO)8(3-S) and [(5-Cp)Mo]2Fe(CO)7-(3-S), which have been characterized by elemental analyses, i.r., 1H- and 13C-n.m.r. and X-ray crystal structure determination. An electrophilic addition–elimination sequence is proposed for their formation.     

Addition of HCl to a Cluster-Bound Vinylidene Ligand: Preparation and Structure of Ru5(μ3-SMe)(μ3-CMe)(μ-Cl)(μ-SMe)(μ-PPh2)2(CO)9·PhMe

Addition of aqueous HCl to Ru₅( ₃-C=CH₂)(-SMe)₂(-PPh₂)₂(CO)₁₀ afforded the structurally characterized carbyne complex Ru₅( ₃-SMe)( ₃-CMe)(-Cl)(-SMe)(-PPh₂)₂(CO)₉, formed by addition of H to the vinylidene ligand; a Cl atom bridges an Ru–Ru bond.     

Torands: Planar polyazamacrocyclic ligands for metal ions

A series of macrocyclic ligands related to hexaaza[18]-annulene form stable complexes with alkali metal and alkaline earth ions. A planar, substituent-solubilized torand, consisting of multiply fused pyridine rings, has been synthesized and has been found to sequester calcium from a dilute source.     

Untersuchungen zur mikroanalytischen Bestimmung der langkettigen Fetts?uren im Blut

Zusammenfassung Für die im Plasma an Albumin gebundenen sog. freien Fettsäuren (FFS) wird ein neues gas-chromatographisches Analysenverfahren vorgestellt. Das Probenvolumen beträgt 50 l Serum oder Plasma. Die Extraktion erfolgt in 1,1 ml CHCl₃/CH₃OH (21, v/v) mit n-Heptadecansäure als innerem Standard (0,05 Val C₁₇₀/ml). Nach Eindampfen am Rotationsverdampfer werden die FFS im verschlossenen Reaktionskölbchen mit 20 l CH₃J/Essigsäureäthylester (11, v/v) über festem K₂CO₃ bei 90°C 1 h verestert. Die Varianz des Verfahrens errechnet sich bei 15 Parallelbestimmungen zu 4,85%.Vortrag anläßlich der Tagung Spurenanalyse, 2. bis 5. April 1973 in Erlangen.     

Preparation of micron-size monodisperse polymer particles by seeded polymerization utilizing the dynamic monomer swelling method

Utilizing a new type of monomer swelling method, 6.1 m-size monodisperse polymer particles were prepared by seeded polymerization. 1.8 m-size monodisperse polystyrene (PS) seed particles (1.8 m in size) were prepared by dispersion polymerization in ethanol-water (80/20, v/v) medium in the presence of poly(acrylic acid) as stabilizer with 2,2-azobisisobutyronitrile as initiator. The PS seed dispersion was mixed with ethanol-water (60/40, v/v) solution dissolving styrene (S) monomer, benzoyl peroxide as initiator, and poly(vinyl alcohol) as stabilizer. By slow, continuous, dropwise addition of water with a micro feeder into the mixture, the PS particles absorbed the many S monomers, which were separated from the medium and swelled from 1.8 m to 8.4 m while keeping the monodispersity high. We named this procedure the dynamic swelling method. Then, the seeded polymerization of the absorbed S monomer was carried out in the presence of NaNO₂ as water-solube inhibitor.Part CXXII of the series Studies on Suspension and Emulsion.     

Heterogeneous hydride generation in a packed membrane cell

Summary Volatilization of arsenic, selenium and antimony for sample introduction in atomic absorption spectrometry has been performed by pumping an acidic sample through an anion exchanger in the tetrahydroborate (III) form packed as a bed in the liquid channel of a gas-liquid separation membrane cell. The hydrides generated in the heterogeneous reaction between bound tetrahydroborate (III) ions and the analytes are rapidly transferred with the aid of the concomitantly generated hydrogen gas through the gas-permeable membrane into the gas phase and swept to the spectrometer by an additional hydrogen gas flow. This instant transfer of the hydrides to the gas phase kinetically discriminates the reaction of the hydride with metal borides and metal colloids, whose formation by reaction with tetra-hydroborate (III) is slower than the hydride reaction. The susceptibility to interference by transition metal ions is thus markedly reduced, as compared with both batch hydride generation methods and a previously presented heterogeneous reaction scheme. The detection limits for arsenic, selenium, and antimony were 1.2, 3.7, and 10 g/l, respectively. The calibration graphs were linear from the detection limit up to 125 g/l for arsenic, 150 g/l for selenium, and 250 g/l for antimony. The relative standard deviations at concentration levels of 10 and 100 g/l were 1.8 and 0.7% for arsenic and 2.3 and 1.2% for selenium. Corresponding figures for 50 and 100 g/l antimony were 2.5 and 1.6%.     

Determination of Ultratrace Levels of Mercury in Three SRMs by Combustion RNAA

A radiochemical neutron activation analysis (RNAA) combustion method coupled with a neutron exposure normalization technique was used to determine low g/kg mercury levels in three National Institute of Standards and Technology (NIST) Standard Reference Materials (SRMs). Two coals (sub-bituminous and bituminous) and a diet material were analyzed. The results obtained provided recommended values of approximately 5 g/kg for SRM 1548a Typical Diet, 24 g/kg for SRM 1635 Trace Elements in Coal (sub-bituminous), and 100 g/kg for SRM 1632b Trace Elements in Coal (bituminous).     

Accurate reflectance measurements in the infrared spectral range using an integrating sphere

An integrating sphere is used together with a Fourier transform spectrometer for directional-hemispherical reflectance measurements in the spectral range from 1m to 15m. Comparisons with PTB's fundamental sphere reflectometer around 1m show that the uncertainty of the infrared measurements is ±0.01.     

The Stevens rearrangement of methylenedimethyloxonium ylide: A quantum chemical study

The conversion of methylenedimethyloxonium ylide to ethyl methyl ether was investigated by the semiempirical MNDO method. An activation energy of 51 kJ/mol suggests that this rearrangement is a possible elementary reaction in the well-known MTG process.

---

. 51 /, , .

     

Extractive spectrophotometric determination of dioxouranium(VI) with the sodium salt of hexamethyleneiminecarbodithioate

The optimum conditions for the extractive spectrophotometric determination of dioxouranium(VI) with hexamethyleneiminecarbodithioate(HMICdt) have been established. Dioxouranium(VI) reacts with this ligand at pH 4.5 to form a yellowish-orange uncharged 12 metal-ligand complex which can be extracted by chloroform. The calibration graph was linear in the range of 1–20 g ml^–1 of dioxouranium(VI) at 335 nm. The molar absorptivity of the extracted species is 5.952×10³ l mol^–1 cm^–1 with Sandell's sensitivity of 0.04 g cm^–2. The average of 10 determinations of dioxouranium was 49.75 g for the samples containing 50 g of U(VI) and the variation from the mean at 95% confidence limit was 49.75±0.5955.     

A study of the surface heterogeneity and catalytic activity of catalysts by means of reaction thermodesorption

Reaction thermodesorption is studied. A generalized wiew is offered regarding the routes along which the transformations take place under the conditions of temperature-programmed desorption.

---

. , .

     

Developpement de la methode thermique de mesure de la tension superficielle liquide-solide

A thermal method connects the solid-liquid surface tension/s of a substance to its triple point temperature depression. Here a practical process for application of this method is described. A previous determination of the thickness of the condensate layer which does not freeze near the wall of the porous material is no longer necessary. The process is applied to some organic substances and to a metal (indium).

---

Zusammenfassung Eine thermische Methode ermöglicht die Oberflächenspannung/s einer Substanz mit der Erniedrigung der Tripelpunkttemperatur in Bezug zu bringen. Eine vorangehende Bestimmung der Dicke der Kondensatschicht, deren Aggregatzustand sich bei Kontakt mit dem porösen Material nicht ändert, ist überflüssig. Die Methode wird auf einige organische Verbindungen und ein Metall (Indium) angewandt.

---

, _.,. — . , , . .

     

Basic properties of alkaline earth metal oxides and their catalytic activity in the decomposition of diacetone alcohol

The effect of CO₂ adsorption on the catalytic activity of alkaline earth metal oxides in the title reaction reveals that the number of active (basic) sites follows the order MgO>CaO>SrO>BaO, and the order of base strength is MgO

CO₂ , () : MgO>CaO>SrO>BaO, : MgO     

Hydrogen exchange in intramolecular cycloalkylation of phenylalkanols

Hydrogen exchange in intramolecular cycloalkylation of 2-methyl-4-phenyl-2-butanol (I) and 2-methyl-5-phenyl-2-pentanol (II) in the presence of 85% D₂SO₄ has been studied. The product 1,1-dimethylindane(III) is shown to contain deuterium in both aromatic ring and polymethylene fragment, whereas 1,1-dimethyltetralin (IV) contains deuterium only in the aromatic ring. A probable mechanism of the reaction is discussed.

---

2--4--2- (I) 2--5--2- (II) 85% D₂SO₄. , 1,1- (III) , 1,1- (IV) . .