Enantiomeric separation of fluoxetine and norfluoxetine in plasma and serum samples with high detection sensitivity capillary electrophoresis

A capillary electrophoresis method was optimized for the stereoselective analysis of the antidepressant drug fluoxetine and its main demethylated metabolite norfluoxetine using a cyclodextrin-modified sodium phosphate buffer at pH 2.5. The combination of a neutral and a negatively charged cyclodextrin, dimethylated-beta- and phosphated-gamma-respectively, provided the baseline enantiomeric separation of the two compounds. The very low concentrations of chiral selectors employed together with the use of a high sensitivity detection cell of special design (zeta-shaped) in a diode array UV detector allowed us to reach a limit of detection of 0.005 and 0.01 microg/mL for fluoxetine and norfluoxetine, respectively. Analysis of fluoxetine and norfluoxetine standard mixtures showed a reproducibility of migration times and peak area and linearity in the concentration range of 0.1-2.0 microg/mL. The optimized method was applied to the analysis of clinical serum and plasma samples of patients under depression therapy. In all the analyzed samples the enantiomeric forms of fluoxetine and norfluoxetine were easily identified. The fluoxetine and metabolite enantiomeric ratio confirmed the stereoselectivity of the metabolic process of the fluoxetine drug in accordance with the literature data.     

Comprehensive two-dimensional separations based on capillary high-performance liquid chromatography and microchip electrophoresis

A novel comprehensive two-dimensional (2-D) separation system coupling capillary high-performance liquid chromatography (cHPLC) with microchip electrophoresis (chip CE) is demonstrated. Reversed-phase cHPLC was used as the first dimension, and chip CE acted as the second dimension to perform fast sample transfers and separations. A valve-free gating interface was devised simply by inserting the outlet-end of LC column into the cross-channel on a specially designed chip. A home-made confocal laser-induced fluorescence detector was used to perform on-chip high-sensitive detection. The cHPLC effluents were continuously delivered to the chip and pinched injections of the effluents every 20 seconds were employed for chip CE separation. Gradient elution of cHPLC was carried out to obtain the high-efficiency separation. Free-zone electrophoresis was performed with triethylamine buffer to achieve high-speed separation and prevent sample adsorption. Such a simple-made comprehensive system was proved to be effective. The relative standard deviations for migration time and peak height of rhodamine B in 150 sample transfers were 3.2% and 9.8%, respectively. Peptides of the fluorescein isothiocyanate (FITC)-labeled tryptic digests of bovine serum albumin were fairly resolved and detected with this comprehensive 2-D system.     

Chiral separation of quinolones by liquid chromatography and capillary electrophoresis

The quinolones are derivatives of oxoquinolines and mostly known for their antibacterial and antiviral activities. Many quinolones are chiral compounds having asymmetric centers and important due to their enantioselective biological activities. In order to study the biological activities of quinolone enantiomers, to control the manufacturing of homochiral drugs and to prepare necessary quantities of pure enantiomers for preclinical or clinical trials, respective chiral separation methods are urgently needed. In this context, the present review discusses chromatographic and electrophoretic methods for the enantioseparation of chiral quinolones and provides some useful information on their physical and pharmaceutical properties. The drawbacks of currently used techniques are revealed and ways to overcome them are outlined. Moreover, recommendations for an optimal choice of a separation protocol are given.     

High performance separations of nucleic acids using capillary electrophoresis and high-performance liquid chromatography

High resolution separations of nucleic acids have been performed using high performance capillary electrophoresis (HPCE) and high performance liquid chromatography (HPLC). Electropherograms showing HPCE separations of single and double stranded DNA are presented and compared with HPLC separations. Single base resolution of poly(dA) oligonucleotides in the size range of 12 to 60-mers was achieved in 35 min using HPCE. Plate numbers for HPCE are in the hundreds of thousands and reproducibility is about 1–2 % (RSD). In comparison with HPLC separations, the resolution of nucleic acids obtained using HPCE is much better than that using HPLC, while reproducibility of HPCE is comparable with that of HPLC.     

Comparative study on the chiral separation of phenyl alcohols by capillary electrophoresis and liquid chromatography

Structurally related phenyl alcohols were separated by capillary electrophoresis and liquid chromatography. A statistical experimental design was used in order to optimize the main electrophoretic parameters such as pH, concentration of selector and separation voltage in capillary electrophoresis (CE). Response surfaces were derived using the mathematical model and used for a selection of the optimal experimental conditions. Concentration of the chiral selector, the distance between the aromatic group and asymmetric center of the analytes, were identified as the factors influencing the complexation, selectivity and resolution. Experiments were also performed by high-performance liquid chromatography (HPLC) and the results of CE and HPLC were compared.     

Chemometric approach to the treatment of benzodiazepine separation and peak broadening in capillary electrophoresis.

A chemometric methodology was used to study capillary efficiency and the separation of ten benzodiazepines in capillary electrophoresis. The resolution between two adjacent peaks on the electropherogram was estimated and the overall quality of the separation was assessed by means of a new response function. The nature (methanol or acetonitrile) and proportion of the organic modifier both in the background electrolyte and the sample buffer and the injection time were considered. The results predicted that if the sample had a lower dielectric constant than the background electrolyte buffer then a much larger injection volume could be used. The computer optimization routine was experimentally validated and the result demonstrated that the fastest electrophoretic reparation was obtained with acetonitrile (7 min instead of 9 min with methanol).     

Rapid development of the enantiomeric separation of beta-blockers by capillary electrophoresis using an experimental design approach.

A rapid method for determining the separation conditions for chiral resolution of eleven beta-blocking drug substances by capillary electrophoresis is described, using an experimental design approach. An acidic phosphate-triethanolamine buffer and an uncoated fused-silica capillary were used for all experiments. Several modified cyclodextrins were applied as chiral selectors: sulfobutyl ether beta-cyclodextrin (SBE-beta CD), dimethyl beta-cyclodextrin (DM-beta CD), carboxymethyl beta-cyclodextrin (CM-beta CD), and hydroxypropyl beta-cyclodextrin (HP-beta CD). Two different fractional factorial experimental designs were applied: (1) a design examining four factors at three levels (3(4-2)) and (2) one examining three factors at two levels (2(3-1)). The factors studied were: type of cyclodextrin, cyclodextrin concentration, pH of the background electrolyte and percentage of organic modifier. Enough resolution for the separation of the enantiomers and even for their quantification was reached. The same scheme is proposed when a fast chiral separation method needs to be developed for other drug families.     

A screening strategy for the development of enantiomeric separation methods in capillary electrophoresis

Method development of enantiomeric separations in capillary electrophoresis (CE) is a time-consuming task, since finding the appropriate chiral selector is usually a "trial and error" process. It is impossible to predict the selectivity of a selector towards a certain enantiomer. Therefore, the affinity of all selectors has to be examined one at a time. In order to speed up this process, a strategy is proposed based on simple experimental design methodology. The approach includes first a screening in function of the pH to determine the optimal migration conditions followed by a selection of the right chiral selector by means of Taguchi designs. In the approach several variables, such as the type and concentration of cyclodextrin, the concentration of buffer electrolyte, and the percentage of organic modifier, are varied simultaneously to find initial separation conditions rapidly. The resulting initial separation conditions can be optimized in further steps to be more reproducible. We discuss the results of the approach when applied on a number of selected compounds that are recently in development at Johnson & Johnson--Pharmaceutical Research and Development. Parameters, such as quality of the separation and analysis time, are evaluated to determine initial separation conditions for each compound.     

Neutral cyclodextrins as chiral agents for enantiomeric separations of chromanes in capillary electrophoresis

Summary Six different cyclodextrins with varying cavity size and rim substitution were used as chiral agents for the enantiomeric separation of eight chromane compounds or analogues using capillary electrophoresis. It is shown that the cyclodextrin type and concentration have a large influence on the enantiomeric separation obtained for these compounds. A chiral resolution of 1.4 or better could be obtained for all the substances with either substituted heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin or unsubstituted γ-cyclodextrin as the chiral selector. The influence of the γ-cyclodextrin concentration, ionic strength and pH on the chiral separations was also investigated with a multivariate screening design. The detection limit and resolution of the present method allow determinations of the investigated compounds down to a chiral impurity of less than 0.1 % (area/area).     

Evaluation of chiral ionic liquids as additives to cyclodextrins for enantiomeric separations by capillary electrophoresis

A great interest has been drawn these last years towards ionic liquids in analytical chemistry, especially for separation methods. Recent synthesis of chiral ILs opened the way of the evaluation of new potential selectors for enantiomeric separations. This work focused on the evaluation of two chiral ILs (ethyl- and phenylcholine of bis(trifluoromethylsulfonyl)imide) by CE. Particular selectivities are awaited by exploiting unique ion-ion or ion-dipole interactions and by tailoring the nature of the cation and the anion. To evaluate such phenomena, a study was carried out with anti-inflammatory drugs 2-arylpropionic acids as model compounds. The results show that these chiral ILs did not present direct enantioselectivity with regard to these model analytes. The influence of chiral ILs in the electrolytes was then studied in the presence of classical chiral selectors (di- or trimethyl-beta-cyclodextrin). Although no general trend could be established, an increase in separation selectivity and resolution was observed in some cases, suggesting synergistic effects. The complementary determination of apparent inclusion constant values of these IL cations in the used cyclodextrins by affinity CE provided support to the understanding of the phenomena involved.     

Two-dimensional separation system of coupling capillary liquid chromatography to capillary electrophoresis for analysis of Escherichia coli metabolites

A two-dimensional (2-D) separation system of coupling chromatography to electrophoresis was developed for profiling Escherichia coli metabolites. Capillary liquid chromatography (LC) with a monolithic silica-octadecyl silica column (500 x 0.2 mm ID) was used as the first dimension, from which the effluent fractions were further analyzed by capillary electrophoresis (CE) acting as the second dimension. Field-enhanced stacking was selectively employed as a concentration strategy to interface the two dimensions, which proved to be beneficial for the detection of metabolites. An artificial sample containing 118 standards, some of which lack chromophores or have weak UV absorbance, was used to optimize the 2-D separation system. Under the optimum conditions, 63 components in the artificial sample having absorbance at 254 nm could be well resolved and detected. The utility of the system was demonstrated by comprehensive analysis of E. coli metabolites. Comparing with the previous 2-D separation system we published in Anal. Chem. 2004, 76, 1419-1428, using a longer monolithic column in the first dimension improved the separation efficiency and offered the possibility of increasing the injection volume without compromising the separation efficiency. In the second dimension, field-enhanced stacking was used to improve the concentration sensitivity of the metabolites, and more metabolites in E. coli cell extract were detected and identified using the developed 2-D separation system. In addition, preliminary investigation for future CE-mass spectrometry coupling was also made in the study by using volatile buffers in the capillary LC and CE techniques.     

Advances in capillary electrophoresis: the challenges to liquid chromatography and conventional electrophoresis

In the 1980s, capillary electrophoresis (CE) developed rapidly into a first-class analytical separation technique. Its advances in instrumentation and method development will not only enhance or complement existing mature separation techniques such as liquid chromatography and conventional slab gel electrophoresis, but will also severely challenge these separation methods. A brief overview of the most striking achievements of CE in the 1980s is given. which illustrates the challenges to liquid chromatography and conventional slab gel electrophoresis, and some detailed discussions are presented to highlight the advantages of CE. New developments in CE that can be expected for the 1990s include especially column technology, separation chemistry and instrumentation, which will serve further to diversify and improve the applicability of this technique in areas which are poorly addressed by other separation methods. This paper considers and speculates on the technological advancements that can be expected to emerge for CE in the 1990s.     

A comparative study of the enantiomeric separation of labeled amino acids with cyclodextrins and mixed micelles in capillary electrophoresis

Enantiomeric separations of fluorescently labeled amino acids are studied by capillary electrophoresis (CE) under a novel variety of experimental conditions. Three different labels are evaluated using two different additives: cyclodextrins (beta- and gamma-) and a dual surfactant system of sodium dodecyl sulfate and sodium taurodeoxycholate. Fluorescein-5-isothiocyanate is the best label to use in this cyclodextrin-based system, and dansyl chloride is the best label to use in this dual surfactant system. Possible limitations for separation of the enantiomers using the mixed micelle system include the fact that there is little interaction of the solute with the surfactants, the negative charge of the solute is limiting the separation window of the system, and the amount of the chiral phase available for partitioning is limited. The separations using cyclodextrins as a chiral selector show that the label affects migration order of the enantiomers, and the cyclodextrins are very effective in separating numerous enantiomers. Overall, cyclodextrins are the better buffer additive for CE use, and the dual surfactant systems, including sodium taurodeoxycholate, offer future promise.     

人血清白蛋白与手性药物相互作用的毛细管电泳研究Ⅱ.药物对映体竞争结合参数的测定

 运用毛细管电泳（CE）技术,在对碱性药物Verapamil（VER）手性拆分的基础上对Verapamil与人血清白蛋白（HSA）平行体系进行了相互作用研究。通过定量HSA－VER体系中VER对映体的浓度,建立对映体对结合位点竞争的理论方程,获得了R和S型药物对映体与HSA的结合常数,其值分别为K（R）-VER=2．7×103×（±4．4×102）和K（S）-VER=8．5×102（±1.0×102）。实验证实,HSA具有手性选择性,与（R）－VER的结合强于与（S）-VER的结合,结合比随着HSA与（±）VER的浓度比而变化。     

Advances in chiral separations of small peptides by capillary electrophoresis and chromatography

Many chemical and biological processes are controlled by the stereochemistry of small polypeptides (di‐, tri‐, tetra‐, penta‐, hexapeptides, etc). The biological importance of peptide stereoisomers is of great value. Therefore, the chiral resolution of peptides is an important issue in biological and medicinal sciences and drug industries. The chiral resolutions of peptide racemates have been discussed with the use of capillary electrophoresis and chromatographic techniques. The various chiral selectors used were polysaccharides, cyclodextrins, Pirkle types, macrocyclic antibiotics, crown ethers, imprinted polymers, etc. The stereochemistry of dipeptides is also discussed. Besides, efforts are made to explain the chiral recognition mechanisms, which will be helpful in understanding existing and developing new stereoselective analyses. Future perspectives of enantiomeric resolution are also predicted. Finally, the review concludes with the demand of enantiomeric resolution of all naturally occurring and synthetic peptides.     

Cyclodextrins as chiral selectors in capillary electrophoresis: a comparative study for the enantiomeric separation of some beta-agonists.

A comparative study for the enantiomeric separation of terbutaline, clenbuterol, salbutamol and dobutamine was performed by capillary electrophoresis using cyclodextrins and their derivatives as chiral selectors. Several parameters such as buffer composition and temperature were studied. Simple, fast and reliable enantioseparations were achieved for all drugs studied, especially when the isomerically pure sulfated beta-cyclodextrin derivatives were used as chiral selectors.     

Comparison of capillary electrophoresis and reversed-phase liquid chromatography for determination of the enantiomeric purity of an M3 antagonist

The chiral separation of an M3 antagonist was investigated using capillary electrophoresis (CE) with various sulfated cyclodextrins and by reversed-phase liquid chromatography with derivatized cellulose, derivatized amylose, and two protein stationary phases. Operational parameters for each technique, such as the concentration of the chiral selectors, background electrolyte (or mobile phase) pH and type, organic modifiers, injection mode and temperature were varied in order to achieve a desired elution order and to meet a 0.1% limit of quantitation (LOQ) criteria. Based on the advantages and disadvantages of each technique, a practical CE method using sulfated gamma-cyclodextrin was selected. The method was validated in terms of linearity, LOQ, accuracy, ruggedness and precision.     

Comparative study of capillary zone electrophoresis and micellar electrokinetic capillary chromatography for the separation of naphthalenedisulfonate isomers

We investigated the separation of a test mixture of nine substituted and unsubstituted naphthalenedisulfonate isomers by capillary electrophoresis with a UV diode array detector. In particular, we focused on how the composition of the running buffer affected the separation selectivity. When capillary zone electrophoresis was carried out, the best results were obtained when organic solvents such as ethanol or propan-2-ol were added. Eight peaks were baseline separated but in no case were all the unsubstituted isomers separated. Therefore, capillary electrophoretic separation of the compounds was examined in the presence of micellar agents, such as sodium dodecyl sulfate, polyethylene glycol dodecyl ether (Brij 35) and cetyltrimethylammonium bromide. All the substituted isomers and two of the unsubstituted isomers were well resolved within 20 min by micellar electrokinetic capillary chromatography when Brij 35 was used as micellar agent. Separations were reproducible, in terms of peak area and migration time, under these conditions.     

Development and validation method for determination of fluoxetine and its main metabolite norfluoxetine by nonaqueous capillary electrophoresis in human urine

A simple, rapid and sensitive procedure using nonaqueous capillary electrophoresis (NACE) to measure fluoxetine and its main metabolite norfluoxetine has been developed and validated. Optimum separation of fluoxetine and norfluoxetine, by measuring at 230 nm, was obtained on a 60 cm × 75 μm capillary using a nonaqueous solution system of 7:3 methanol-acetonitrile containing 15 mM ammonium acetate, capillary temperature and voltage 25 °C and 25 kV, respectively and hydrodynamic injection. Paroxetine was used as internal standard. Good results were obtained for different aspects including stability of the solutions, linearity, and precision. Detection limits of 10 μg L⁻¹ were obtained for fluoxetine and its metabolite. This method has been used to determine fluoxetine and it main metabolite at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of extraction-preconcentration step with a preconditioned C₁₈ cartridge and eluting the compounds with methanol.