Effect of Cu-stoichiometry on the dielectric and electric properties in CaCu3Ti4O12 ceramics

CaCu_3+yTi₄O₁₂ (y=0, ±0.025, ±0.05, ±0.1 and −0.15) ceramics are prepared by the conventional solid-state reaction technique under sintering condition of 1050 ^°C, 10 h. X-ray diffraction shows that they all have the good crystalline structure. Cu-deficient ceramics exhibit the microstructures of uniform grain size distribution, whereas both Cu-stoichiometric and Cu-rich ceramics display microstructures of bimodal grain size distribution. The largeness of low-frequency dielectric permittivity at room temperature is found to be very sensitive to the Cu-stoichiometry. Upon raising the measuring temperature, all of the ceramics present commonly three semicircles in the complex impedance plane. It indicates that there exist three distinct contributions, which are ascribed to arising from domains, grain boundaries and domain boundaries. In addition, the influence of CuO segregation on the dielectric and electrical properties is also discussed.     

Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

Relaxor Behaviour and Ferroelectric Properties of （Li0.12Na0.88） （Nb0.9-xWa0.10Sbx）O3 Lead-Free Ceramics

New lead-free ceramics （Lio.12Na0.88） （Nbo.9-x Ta0.10 Sbx） 03 （0.01 × 0.06） are synthesized by solid-state reaction method. The dielectric, piezoelectric and ferroelectric properties of the ceramics are studied. The dielectric constant dependence with temperature and frequency of the ceramic specimen with x = 0.04 shows typical characteristics of relaxor ferroelectrics, and the Vogel-Fulcher relationship is fulfilled. The dielectric behaviour and its relation to the phase transition phenomena are discussed. The polarization hysteresis loops at room temperature are also measured.     

Microstructure-dependent giant dielectric response in CaCu3Ti4O12 ceramics

CaCu₃Ti₄O₁₂ ceramics were prepared at the sintering temperatures ranged from 1025 to 1125 °C, and the dielectric characteristics were evaluated together with the microstructures. The giant dielectric constant with the maximum of 53,120 was obtained in CaCu₃Ti₄O₁₂ ceramics at room temperature and 10 kHz, and strong processing and microstructure dependence of dielectric characteristics of the present ceramics was determined. The precipitation of the dispersed Cu-rich secondary phases of CuO and/or Cu₂O and their network structure provided the extrinsic origins of the enhanced giant dielectric response, and the present findings would offer the greater potential for enhancing the giant dielectric constant and controlling the dielectric loss in CaCu₃Ti₄O₁₂ ceramics by optimizing the microstructures.     

Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics

Single phase ceramics CaCu₃Ti_4.0O₁₂ and CaCu₃Ti_3.9O₁₂ have been prepared using the traditional solid-state reaction method. Compared with the stoichiometric ceramics CaCu₃Ti_4.0O₁₂, Ti-deficient ceramics CaCu₃Ti_3.9O₁₂ have the larger lattice parameter, the higher force constant, and smaller dielectric constant and the lower dissipation factor, although their fundamental characters of dielectric response are similar. Their characteristic relaxation frequencies are not well fitted with the Arrhenius Law but a tentatively supposed relation. With the Cole-Cole Law, the fitted broadened factors of dissipation peaks are 0.5433 and 0.8651 for CaCu₃Ti_3.9O₁₂ and CaCu₃Ti_4.0O₁₂, respectively. All facts mentioned above imply that mutually correlated motion of Ti ions or defects may be expected to be responsible for the giant dielectric constant and high dissipation factor of CaCu₃Ti_4.0O₁₂.     

Ferroelectricity and ferromagnetism in fine-grained multiferroic BaTiO3/(Ni0.5Zn0.5)Fe2O4 composites prepared by a novel hybrid process

Dense, homogeneous, and fine-grained multiferroic BaTiO₃/(Ni_0.5Zn_0.5)Fe₂O₄ composite ceramics are synthesized by a novel powder-in-sol precursor hybrid processing route. This route includes the dispersion of nanosized BaTiO₃ ferroelectric powders prepared via conventional sold-state ceramic process into (Ni_0.5Zn_0.5)Fe₂O₄ ferromagnetic sol-gel precursor prepared via a sol-gel wet chemistry process. The composite ceramics show coexistence of obvious ferroelectric and ferromagnetic hysteresis loops at room temperature. Very low dielectric loss of about 0.02–0.0067 in the range of 10 kHz–10 MHz can be achieved, which is about an order of magnitude lower than the results of many reports using conventional processes at room temperature. The combination of high permeability and permittivity with low losses in the ceramics enables significant miniaturization of electronic devices based on the ceramics.     

Influence of Ca additives on the optical and dielectric studies of sol-gel derived PbTiO3 ceramics

Sintered ceramic powders of calcium-doped lead titanate [Pb_1−xCa_xTiO₃] ceramics with different Ca dopant concentration in the range (x=0-0.35) have been prepared using a sol-gel chemical route. The sol-gel technique is known to offer better purity and homogeneity, and can yield stoichiometric powders with improved properties at relatively lower processing temperature in comparison to conventional solid-state reaction. X-ray diffraction (XRD) and Raman spectroscopy studies have been carried out to identify the crystallographic structure and phase formation. The infrared absorption spectra in the mid-IR region (400-4000 cm⁻¹) show the band corresponding to the Ti-O bond at ∼576 cm⁻¹ and is found to shift to a higher wave number 592 cm⁻¹ with increasing Ca content. The dielectric properties as a function of frequency, and phase transition studies on sintered ceramic Pb_0.65Ca_0.35TiO₃ has been investigated in detail over a wide temperature range 30-600 °C and the results are discussed.     

Synthesis and dielectric characteristics of La0.5Bi0.5MnO3 ceramics

La_0.5Bi_0.5MnO₃ ceramics with a single phase were prepared by a solid-state reaction method, and their dielectric properties were characterized. Two dielectric relaxations with a giant dielectric constant were identified in the temperature range from 125 to 350 K. The electron hopping between Mn³⁺ and Mn⁴⁺ was found to be the origin of the dielectric relaxation at low temperatures (125–200 K) with an activation energy of 0.18 eV. The high temperature (200–350 K) dielectric relaxation can be attributed to the conduction.     

Bismuth zinc niobate (Bi1.5ZnNb1.5O7) ceramics derived from metallo-organic decomposition precursor solution

The preparation, microstructure development and dielectric properties of Bi_1.5ZnNb_1.5O₇ pyrochlore ceramics by metallo-organic decomposition (MOD) route are reported. Homogeneous precalcined ceramic powders of 13-36 nm crystallite size were obtained at temperatures ranging from 500 to 700 °C. The thermal decomposition/oxidation of the gelled precursor solution was chemically analyzed, TG/DTA, XRD, and SEM, led to the formation of a pure cubic pyrochlore phase with a stoichiometry close to Bi_1.5ZnNb_1.5O₇ which begins to form at 500 °C. The metallo-organic precursor synthesis method, where Bi, Zn and Nb ions are chelated to form metal complexes, allows the control of Bi/Zn/Nb stoichiometric ratio on a molecular scale leading to the rapid formation of bismuth zinc niobate (Bi_1.5ZnNb_1.5O₇) ceramic fine powders with pure pyrochlore structure. The powders were pressed into pellets and can be sintered at temperatures as low as 800-1000 °C. Fine crystalline ceramics with the grain size in the range of 200-500 nm have been obtained at the sintering temperature of 800 °C. The dielectric properties in high frequency to microwave range were measured and discussed.     

Comparative study of K0.5Bi0.5TiO3 nanoparticles derived from sol-gel-hydrothermal and sol-gel routes

A kind of novel lead-free ferroelectrics, potassium bismuth titanate, K_0.5Bi_0.5TiO₃ (KBT), has been prepared by sol-gel-hydrothermal and sol-gel routes, respectively, and the structural characters of as-synthesized powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results indicated that sol-gel-hydrothermal route led to the formation of KBT nanowhiskers with diameters of 20 nm and lengths of 1 μm, and the processing temperature was as low as 160 °C, but the normal sol-gel route tended to form KBT cubic particles of about 100-200 nm, and the processing temperature was higher than 700 °C. It is believed that the gel precursor and hydrothermal environment play an important role in the formation of the nanowhiskers at low temperature. Due to the good sinterability of nanowhiskers, the ferroelectric and dielectric properties of KBT ceramics prepared by sol-gel-hydrothermal route were super to that prepared by sol-gel route.     

Effect of In-Doping on Electronic Structure and Optical Properties of Sr2TiO4

The effect of In doping on the electronic structure and optical properties of Sr2 TiO4 is investigated by a firstprinciples calculation of plane wave ultrasoft pseudopotentials based on density functional theory. The calculated results reveal that corner-shared TiO6 octahedra dominate the main electronic properties of Sr2TiO4 and the covalency of the Ti-O（1） bond in the ab plane is stronger than that of the Ti-O（2） bond along the c-axis. After In doping, there is a little lattice expansion in Sr2In0.125 Ti0.875 O4 and the interaction between the Ti-O bond near the impurity In atom is weakened. The binding energies of Sr2TiO4 and Sr2In0.125Ti0.875O4 estimated from the electronic structure calculations indicate that the crystal structure of Sr2In0.125 Ti0.875 O4 is still stable after doping, but its stability is lower than that of undoped Sr2TiO4. Moreover, the valence bands （VBs） of the Sr2In0.125Ti0.875O4 system consist of O 2p and In 4d states, and the mixing of O 2p and In 4d states makes the top VBs shift significantly to high energies, resulting in visible light absorption. The adsorption of visible light is of practical importance for the application of St2 TiO4 as a photocatalyst.     

Electronic Structure and Optical Properties of La-Doped SrTiO3 and Sr2TiO4 by Density Function Theory

The effect of La doping on the electronic structure and optical properties of SrTiO₃ and Sr₂TiO₄ is investigated by the first-principles calculation of plane wave ultrasoft pseudopotential based on the density function theory (DFT). The calculated results reveal that the electron doping in the case of Sr_0.875La_0.125TiO₃ and Sr_1.875La_0.125TiO₄ can be described within the rigid band model. The La³⁺ ions fully acts as electron donors in Sr_0.875La_0.125TiO₃ and Sr_1.875La_0.125TiO₄ systems and the Fermi level shifts further into the conduction bands (CBs) for Sr_1.875La_0.125TiO₄ compared to Sr_0.875La_0.125TiO₃. The two systems exhibit n-type degenerate semiconductor features. At the same time, the density of states (DOS) of the two systems shift towards low energies and the optical band gaps are broadened. The Sr_1.875La_0.125TiO₄ is highly transparent with the transmittance about 90% in the visible range, which is larger than that of Sr_0.875La_0.125TiO₃(85%). The wide band gap, small transition probability and weak absorption due to the low partial density of states (PDOS) of impurity in the Fermi level result in the optical transparency of the films...     

Synthesis of fine-crystalline Ba0.6Sr0.4TiO3-MgO ceramics by novel hybrid processing route

We report the use of a novel powder-in-sol precursor hybrid processing route to synthesize dense, homogeneous, and fine-crystalline Ba_0.6Sr_0.4TiO₃-MgO (BST-MgO) ceramics as well as the study of the sintering behavior, microstructures, and dielectric properties of the ceramics. Nanosized BST powders are dispersed into BST sol-gel precursor and uniformly distributed BST slurry is obtained after ball-milling mixing. Mg(NO₃)·6H₂O solution is added to the BST slurry to give homogeneous BST-MgO slurry upon ball-milling mixing. The BST-MgO slurry is dried and calcined prior to pressing and sintering at low temperatures of 1200-1300 °C to form the ceramics. The ceramics possess very low dielectric loss tangent below 0.005 for frequency above 1 kHz and for temperature in the range −190-80 °C. The dielectric constant and dielectric tunability increase, while the ferroelectric transition broadening decreases, with increasing average grain size.     

Ferroelectric-relaxor behavior of (Na0.5K0.5)NbO3-based ceramics

We report that ferroelectric-relaxor behavior is induced by doping of SrO and TiO₂, or BaO and TiO₂ into classic ferroelectric (Na_0.5K_0.5)NbO₃. It is found that [(Na_0.5K_0.5)_0.9Sr_0.1](Nb_0.9Ti_0.1)O₃ ceramics exhibit a pronounced ferroelectric-relaxor behavior, comparable to that of [(Na_0.5K_0.5)_0.9Ba_0.1](Nb_0.9Ti_0.1)O₃ ceramics. Our results indicate that the relaxor behavior is closely related to the appearance of micropolar regions in these systems. The relaxor behavior should arise from the dynamic response of micropolar clusters. Raman spectra of [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics measured in the wavenumber range from 100 to 1200 cm⁻¹ confirm that the first order scattering is dominant in phonon bands should result from both short-range ordered region (micropolar regions) and disordered matrix. The frequency dependence of dielectric permittivity measurements show that the relaxor behavior of SrO and TiO₂, or BaO and TiO₂ doped (Na_0.5K_0.5)NbO₃ ceramics is not a Debye type in the radio frequency range.     

Structural and electrical behavior of Pb(Mg1/4Cd1/4Mo1/2)O3 ceramics

Preliminary X-ray structural analysis of polycrystalline Pb(Mg_1/4Cd_1/4Mo_1/2)O₃ ceramics, prepared by a solid-state reaction technique, provides single-phase orthorhombic structure at room temperature. Detailed dielectric studies of the material as a function of temperature reveal a sharp phase transition at temperature T_c=49°C obeying Curie-Weiss behavior. Scanning electron microscope (SEM) studies of the sample show the uniform distribution of grains in the samples. A dielectric anomaly and ferroelectric phase transition observed at 49°C was supported by polarization studies. The activation energy of the sample was calculated from the dielectric data. The variation of dc resistivity with temperature suggests that the compound behaves as a negative temperature coefficient resistor (NTCR).     

Na0.25K0.25Bi0.5TiO3无铅压电陶瓷的介电特性研究

用固相反应法制备了Na_0.25K_0.25Bi_0.5TiO₃ (NKBT50)陶瓷，研究了该陶瓷在室温至400℃温度范围内的介电性能.发现该陶瓷的介电温谱与烧结气氛、极化状态有关.在空气中烧结的未极化样品在70℃附近存在介电和损耗峰，而极化后及在氧气氛中烧结的样品并不存在该介电、损耗峰.分析认为70℃的介电和损耗峰与氧空位形成的缺陷偶极子的极化弛豫有关.热激电流显示，陶瓷的去极化温度为225℃，与此相对应的介电、损耗峰也 关键词： 介电性能 氧空位 极化弛豫 钛酸铋钠钾     

Microstructure,dielectric, and piezoelectric properties of Ce‐modified Na0.5Bi4.5Ti4O15 high temperature piezoceramics

The cerium modified sodium bismuth titanate (Na_0.5Bi_4.5Ti₄O₁₅, NBT) piezoelectric ceramics have been prepared by using the conventional mixed oxide method. X‐ray diffraction analysis revealed that the cerium modified NBT ceramics have a pure four‐layer Aurivillius phase structure. The piezoelectric activity of NBT ceramics was found significantly improved by the modification of cerium. The Curie temperature T_c, and piezoelectric coefficient d₃₃ for the NBT ceramics with 0.50 wt% cerium modification were found to be 655 °C, and 28 pC/N respectively. The Curie temperature gradually decreased from 668 °C to 653 °C with the increase of cerium modification. The dielectric spectroscopy showed that the samples possess stable piezoelectric properties, demonstrating practical potential that for high temperature applications. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Oxygen-defects-related dielectric response in CaCu3Ti4O12 ceramics

A 10 mm thickness columned CaCu₃Ti₄O₁₂ ceramic was fabricated by the conventional solid-state reaction method and the dielectric properties of different parts in ceramic had been investigated. For the sample close to the surface, only one Debye-type relaxation around 10⁷ Hz was observed at room temperature. However, for the sample close to the core, another relaxation peak was observed at about 10⁴ Hz. The results were explained in terms of the equivalent circuit model by showing in the impedance spectroscopy. Moreover, it was introduced that the low-frequency dielectric relaxation is associated with the electrode-sample contact effect based on varying sample thickness and an annealing treatment in the nitrogen atmospheres.     

Decrease of loss in dielectric properties of TbMnO3 by adding TiO2

Low-frequency (10²-10⁵ Hz) dielectric properties of TbMnO₃+xTiO₂ (x=0.33, 1, 3) ceramic composites, which were fabricated by conventional solid-state reaction, were investigated from 360 to 77 K. Very high dielectric constants and interesting temperature dependence of the dielectric properties were observed in the present composite ceramics. When compared to the high dielectric loss of the polycrystalline TbMnO₃, the loss of TbMnO₃+xTiO₂ (x=0.33, 1, 3) decreased with the increasing TiO₂. Especially for TbMnO₃+1TiO₂, the dielectric loss decreased remarkably, while the dielectric constant was still very high, which are more favorable for practical applications.     

平面冲击波作用下TiO_2晶粒的相变纳米化

利用平面冲击波技术,对溶胶-凝胶法制备的锐钛矿型TiO2粉体和干凝胶进行冲击实验,采用X射线衍射(XRD)、透射电镜(SEM)和激光粒度分析仪(LPSA)等手段对冲击前后的TiO2粉体和干凝胶进行表征。结果表明:冲击波的高温作用能够实现亚稳态的锐钛矿型TiO2向稳定态的金红石型TiO2转变,并且冲击波直接作用于干凝胶时更容易获得稳定态的金红石型TiO2;冲击波的瞬时性可以抑制TiO2晶粒的长大,实现晶粒纳米化;冲击波的高压作用可以有效控制由于溶胶-凝胶法导致的粉体团聚现象。