Single molecule modulation spectroscopy of conjugated polymers

This paper describes a new single molecule spectroscopy approach for the investigation of triplet-triplet and singlet-triplet interactions in conjugated polymers. The technique involves the irradiation of isolated single, mulitchromophoric, conjugated polymer molecules by a repetitive sequence of variable-intensity microsecond time scale excitation pulses. The fluorescence intensity is synchronously time-averaged for thousands of cycles of the pulse sequence to yield a high signal-to-noise fluorescence transient on the microsecond time scale. The transient can be analyzed with kinetic models to obtain quantitative information about the kinetics of triplet-triplet exciton annihilation and the quenching of singlet excitons by triplet excitons in conjugated polymers.     

Redistribution of emitting state population in conjugated polymers probed by single-molecule fluorescence polarization spectroscopy

Fluctuations in the fluorescence polarization degree and direction are reported for the first time for single conjugated polymer molecules embedded in a polystyrene matrix at room temperature. The polymer molecule, a polythiophene derivative, clearly emits as a multi-chromophore ensemble showing that the energy does not funnel to any specific low-energy trap. The fluorescence instead originates from thermally populated exciton states with different relative orientations of the transition dipole moments. The fluctuations in the fluorescence polarization are explained in terms of changes in the relative contributions of the different exciton states to the signal due to conformational fluctuations of the molecule or selective exciton quenching by triplet states.     

Excitation energy migration processes in cyclic porphyrin arrays probed by single molecule spectroscopy

By using single molecule fluorescence spectroscopy we have investigated the excitation energy migration processes occurring in a series of cyclic porphyrin arrays bearing a close proximity in overall architectures to the LH2 complexes in purple bacterial photosynthetic systems. We have revealed that the conformational heterogeneity induced by the structural flexibility in large cyclic porphyrin arrays, which provides the nonradiative deactivation channels as an energy sink or trap, reduces significantly the energy migration efficiency. Our study provides detailed information on the energy migration efficiency of the artificial light-harvesting arrays at the single molecule level, which will be a guideline for future applications in single molecular photonic devices in the solid state.     

Effect of sample preparation and excitation conditions on the single molecule spectroscopy of conjugated polymers

Extensive new single molecule spectroscopy (SMS) data on the conjugated polymer MEH-PPV at low temperature were obtained. In particular, the combined effects of sample preparation and excitation condition were explored in detail. The data confirm previous observations from this laboratory that (i) the distribution of emission maxima of single MEH-PPV molecules has a bimodal distribution and (ii) the single molecule emission spectrum of MEH-PPV exhibits few time-dependent fluctuations of the emission intensity, band shape, or spectral maxima. These data also help explain the discrepancy among the various published SMS data on this compound and suggest that environmental impurities, long irradiation times, nearby interfaces, and incomplete data sampling may account for some of the discrepancies among the published data.     

Synthesis of light harvesting polymers by RAFT methods

Polymers prepared by RAFT polymerisation containing acenaphthyl energy donors and a terminal anthryl energy acceptor have a narrow molecular weight distribution and exhibit excitation energy transfer efficiencies up to 70%.     

Charge transfer interactions in liquid crystalline polymers probed by fluorescence spectroscopy

Rigid-rod aromatic LC polyester with long alkyl side chains and two thermotropic LC polyesters (PET40/OBA60 and PB-10) were studied by fluorescence spectroscopy to investigate their charge transfer interactions corresponding to LC configuration and changes during phase transition.     

Heterogeneous dynamics and dynamic heterogeneities at the glass transition probed with single molecule spectroscopy

We studied the temperature dependence of the structural relaxation in poly(vinyl acetate) near the glass transition temperature with single molecule spectroscopy from Tg-1 K to Tg+12 K. The temperature dependence of the observed relaxation times matches results from bulk experiments; the observed relaxation times are, however, 80-fold slower than those from bulk experiments at the same temperature. We attribute this factor to the size of the probe molecule. The individual relaxation times of the single molecule environments are distributed normally on a logarithmic time scale, confirming that the dynamics in poly(vinyl acetate) is heterogeneous. The width of the distribution of individual relaxation times is essentially independent of temperature. The observed full width at half maximum (FWHM) on a logarithmic time axis is approximately 0.7, corresponding to a factor of about 5-fold, significantly narrower than the dielectric spectrum of the same material with a FWHM of about 2.0 on a logarithmic time axis, corresponding to a factor of about 100-fold. We explain this narrow width as the effect of temporal averaging of single molecule fluorescence signals over numerous environments due to a limited lifetime of the probed heterogeneities, indicating that heterogeneities are dynamic. We determine a loose upper limit for the ratio of the structural relaxation time to the lifetime of the heterogeneities (the rate memory parameter) of Q<80 for the range of investigated temperatures.     

Infrared spectroscopy of electroluminescent conjugated polymers

The infrared spectra of the light-emitting diodes and the metal-insulator-semiconductor devices based on a poly(p-phenylenevinylene) derivative MEH-PPV have been measured in situ with a reflection configuration. The voltage-induced infrared spectra of these devices have been measured by the FT-IR difference-spectrum method. The observed bands have been attributed to the carriers injected into the polymer layers. The observation of positive carriers in the polymer light-emitting diode is probably related to the predominance of injected positive carriers, which is one of the factors in the low efficiency of the polymer light-emitting diode. In situ infrared reflective absorption measurements provide the information about injected carriers, which play a central role in the properties and the functions of polymer electronic devices.     

Supramolecular research by single molecule force spectroscopy

Single molecule force spectroscopy (SMFS) is a new kind of technique based on atomic force microscope, which allows detecting force as low as pico-newtons directly. Herein based on our recent work, we want to demonstrate the investigation of supramolecular structures and interactions in polymer systems by SMFS, such as desorption force between polymer and substrate, identifiability of polymer micelle and its interaction with surfactant, splitting force of ion-induced helical structure in polysaccharide. It shows well that SMFS is a powerful tool in the study of supramolecular science.     

Binding mode of proflavine to DNA probed by polarized light spectroscopy

It is well known that proflavine binds to DNA. Here we investigate the binding mode of proflavine to native DNA using absorption, circular dichroism (CD), and linear dichroism (LD) spectroscopy as well as by fluorescence techniques. The observed changes of proflavine upon complexation with DNA can be summarized as a red shift and hypochromism in the absorption spectrum. The negative LD^r in the proflavine absorption region has a magnitude comparable to or larger than that of the DNA absorption region, confirming the intercalative binding mode of proflavine to DNA. Saturation of the LD spectrum in the proflavine absorption region at R = 0.25 and a decrease in the fluorescence intensity provide further evidence of intercalation. Furthermore, the coupling of electric transition of intercalated proflavine is observed. Although proflavine has been reported to position itself along the DNA stem at high [proflavine]/[DNA base] ratios, the spectral characteristics, which include a clear isosbestic point in the absorption spectrum and proportionality in the LD magnitude in the proflavine absorption region, do not show any possibility of exterior binding.     

Efficient light harvesting by sequential energy transfer across aggregates in polymers of finite conjugational segments with short aliphatic linkages.

Interactions between lumophores have a critical influence on the photophysical properties of conjugated polymers. We synthesized a new series of light-harvesting polymers (poly-DSBs, I-IV) of dialkyloxy- or dialkyl-substituted distyrylbenzene (the substituents being methoxy, 2-ethylhexyloxy, and cyclohexyl) with short aliphatic linkage (methylene or ethylene) and examined the effects of interactions between lumophores and of chemical structures on the absorption, emission, and excitation spectra. The proximity between distyrylbenzene lumophores was shown to be critical to the interactions between lumophores and to the energy-transfer processes. In concentrated solutions and solid films, intermolecular aggregates exist resulting from different extents of interactions between lumophores and are found to involve at least three species: loose, compact, and the most aligned aggregates as observed by photoluminescence and excitation spectroscopies. We also found, for the first time, sequential energy transfer from individual lumophores to the most compact, aligned aggregates via the looser intermolecular aggregates, as observed directly by time-resolved fluorescence spectroscopy. Such a process mimics energy transfer in photosynthesis units and is so efficient such that the fluorescence color can be red-shifted drastically by the presence of comparatively few aggregates and that the light evolved from concentrated solutions and films of poly-DSBs I-IV is entirely or almost the aggregation emission. Although the sequential energy-transfer process in fully conjugated electro-/photoluminescent polymers due to inhomogenity other than distributed conjugation lengths has never been directly observed at room temperature, we suggest that events similar to those observed in poly-DSBs in conjugated polymers could occur but on a much shorter time scale, i.e., a few picoseconds.     

Efficient light harvesting by using green Zn-porphyrin-sensitized nanocrystalline TiO2 films

A series of novel zinc metalloporphyrins, cyano-3-(2'-(5',10',15',20'-tetraphenylporphyrinato zinc(II))yl)-acrylic acid (Zn-3), 3-(trans-2'-(5',10',15',20'-tetraphenylporphyrinato zinc(II))yl)-acrylic acid (Zn-5), 2-cyano-5-(2'-(5',10',15',20'-tetraphenylporphyrinato zinc(II))yl)-penta-2,4-dienoic acid (Zn-8), 4-(trans-2'-(2' '-(5' ',10' ',15' ',20' '-tetraphenylporphyrinato zinc(II))yl)ethen-1'-yl))-1,2-benzenedicarboxylic acid (Zn-11), and 2-cyano-3-[4'-(trans-2' '-(2' '-(5' ',10' ',15' ',20' '-tetraphenylporphyrinato zinc(II))yl) ethen-1' '-yl)-phenyl]-acrylic acid (Zn-13) were synthesized and characterized by using various spectroscopic techniques. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations show that key molecular orbitals (MOs) of porphyrins Zn-5 and Zn-3 are stabilized and extended out onto the substituent by pi-conjugation, causing enhancement and red shifts of visible transitions and increasing the possibility of electron transfer from the substituent. The porphyrins were investigated for conversion of sunlight into electricity by constructing dye-sensitized TiO(2) solar cells using an I(-)/I(3)(-) electrolyte. The cells yield close to 85% incident photon-to-current efficiencies (IPCEs), and under standard AM 1.5 sunlight, the Zn-3-sensitized solar cell demonstrates a short circuit photocurrent density of 13.0 +/- 0.5 mA/cm(2), an open-circuit voltage of 610 +/- 50 mV, and a fill factor of 0.70 +/- 0.03. This corresponds to an overall conversion efficiency of 5.6%, making it the most efficient porphyrin-sensitized solar cell reported to date.     

Donor-acceptor conjugated cooligomers for single molecule solar cells

Five novel donor-acceptor(D-A) conjugated cooligomers(F4B-hP,F5B-hP,F5B2[1,2]-hP,F5B2[1,3]-hP and F7B2[1,2]-hP) were synthesized.The absorption spectra of the cooligomers cover a wide range from 300 nm to 630 nm.The cooligomers could form films featured by alternating D-A lamellar nanostructures with the periods relative to the molecular lengths after thermal annealing or solvent vapor annealing.Single molecule solar cells were fabricated,and F5B-hP exhibited the best device performance.When the film of F5B-hP was thermally annealed,a power conversion efficiency(PCE) of 1.56% was realized.With solvent vapor annealing,the PCE could be further improved to 1.72% with a short-circuit current(J SC) of 5.76 mA/cm 2,an open-circuit voltage(V OC) of 0.87 V and a fill factor(FF) of 0.34.     

Flexibility of phenylene oligomers revealed by single molecule spectroscopy

The rigidity of a p-phenylene oligomer (p-terphenyl) has been investigated by single molecule confocal fluorescence microscopy. Two different rylene diimide dyes attached to the terminal positions of the oligomer allowed for wavelength selective excitation of the two chromophores. In combination with polarization modulation the spatial orientation of the transition dipoles of both end groups could be determined independently. We have analyzed 597 single molecules in two different polymer hosts, polymethylmethacrylate and Zeonex. On average we find a 22 degrees deviation from the linear gas phase geometry (T = 0 K), indicating a rather high flexibility of the p-phenylene oligomer independent of the matrix. To substantiate our experimental results, we have performed quantum chemical calculations at the density functional theory level for the molecular geometry and the electronic excitations. Our findings are in agreement with former experiments on the persistence length of poly(p-phenylenes).     

Freezing single molecule dynamics on interfaces and in polymers

Heterogeneous line broadening and spectral diffusion of the fluorescence emission spectra of perylene diimide molecules have been investigated by means of time dependent single molecule spectroscopy. The influence of temperature and environment has been studied and reveals strong correlation to spectral diffusion processes. We followed the freezing of the molecular mobility of quasi free molecules on the surface upon temperature lowering and by embedding into a poly(methyl methacrylate) (PMMA) polymer. Thereby changes of optical transition energies as a result of both intramolecular changes of conformation and external induced dynamics by the surrounding polymer matrix could be observed. Simulations of spectral fluctuations within a two-level system (TLS) model showed good agreement with the experimental findings.     

Phosphorescence quenching by conjugated polymers

Energy transfer between phosphors and conjugated polymers was investigated using a fluorene trimer (F3) as a model conjugated material. The phosphors studied were bis-cyclometalated iridium complexes (FP, PPY, BT, PQ, and BTP), with triplet energies of 2.6, 2.4, 2.2, 2.1, and 2.0 eV, respectively (based on phosphorescence spectra). Stern-Volmer analysis of luminescent quenching shows that energy transfer from either FP or PPY to F3 is an exothermic process with Stern-Volmer quenching constants (kqSV) of near 109 M-1 s-1 while energy transfer from BT, PQ, and BTP is endothermic (kqSV = 107-106 M-1 s-1). On the the basis of above results, the triplet energy of F3 is estimated to be less than 2.3 eV (530 nm). This study suggests that conjugated polymers, which typically have lower T1 energies than F3, should also quench phosphorescent emission in thin films and organic light-emitting diodes (OLEDs) incorporating these and related phosphorescent dopants.     

Submolecular dynamics of amorphous polymers probed by two-dimensional infrared (2D IR) spectroscopy

Two-dimensional infrared (2D IR) spectroscopy was used to probe the submolecular dynamics of atactic polystyrene. 2D IR is a powerful analytical technique especially suited for the elucidation of localized motions of polymer segments. In 2D IR, a polymer sample is excited by a small-amplitude oscillatory strain at a frequency in the acoustic range. The fluctuation of IR dichroism signals resulting from the strain-induced reorientation of electric dipole-transition moments is monitored with a time-resolved spectrometer. Spectra defined by two independent wavenumber axes are constructed by applying a correlation analysis to such signals. The 2D spectra provide detailed information about the local dynamics of submolecular constituents of the system. From the sign of cross peaks in the synchronous 2D IR spectrum of glassy polystyrene, it is shown that the main-chain backbone of polystyrene reorients in the direction of applied strain. Cross peaks in an asynchronous 2D IR spectrum reveal highly localized reorientational motions of phenyl side groups occurring more or less independently of the main-chain realignment. In the glassy state, the phenyl ring tends to fold back along the main-chain, indicating that there exists a highly constrained local distortion of side groups during deformation.     

Electrical conductance of conjugated oligomers at the single molecule level

We determine and compare, at the single molecule level and under identical environmental conditions, the electrical conductance of four conjugated phenylene oligomers comprising terminal sulfur anchor groups with simple structural and conjugation variations. The comparison shows that the conductance of oligo(phenylene vinylene) (OPV) is slightly higher than that of oligo(phenylene ethynylene) (OPE). We find that solubilizing side groups do neither prevent the molecules from being anchored within a break junction nor noticeably influence the conductance value.