Dye and its removal from aqueous solution by adsorption: A review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.     

Removal of chromium from water using pea waste – a green approach

Abstract

Agro-waste materials have carboxylic and phenolic groups that play the main role in metal adsorption. The advantages of these materials include easy availability, low cost, and reasonable metal removal capacity. One of the materials (usually considered as waste) is pea waste (pods). Present work comprises adsorption of chromium from aqueous solution using powder of pods of garden peas (Pisum sativum) in batch. Important parameters like adsorbent dose, pH, contact time, and agitation speed were studied. Adsorption equilibrium was explained by Langmuir, Freundlich, and Temkin isotherms. Maximum chromium uptake (q _m) was 3.56 mg/g of adsorbent. Heat of adsorption, as evaluated by Temkin isotherm was 1.96 kJ/mol. It is proposed that pea pods can be an effective and environmentally benign (green) adsorbents for removal of chromium from industrial effluents and waste waters.     

Exploration of biomass waste as low cost adsorbents for removal of methylene blue dye: A review

Biomass waste, which is abundantly available has been studied as low cost biosorbent for dye sequestration from waste water. The present review reports on recent development for remediation of methylene blue dye by agricultural waste and fruit peel waste material. The aim of this study was to revise latest literature in the field of dye adsorption and discuss the dye adsorption capacity of different types of adsorbents. The activated carbon prepared from several types of biomass waste material enhances the adsorption efficiency after modification. The variety of activating agents, method of activation, characterization of biosorbent material like SEM, EDAX, BET surface area and FTIR analysis has been explored in the present review. The dye adsorption factors such as effect of pH, agitation time, temperature, adsorbate and adsorbent dose were discussed. The detailed investigation on applicability of isotherm model, kinetic model and thermodynamic parameters has also been presented. The adsorption kinetics and adsorption isotherm model focus on selectivity of adsorbent. Adsorption mechanism, Influence of surface area, influence of pH_pzc and comparative study of biomass waste adsorbent with other adsorbents have been carried out. The use of biomass waste adsorbents is economically feasible, environmental healthy and found to have outstanding removal capacity of dyes.     

Industrial wastes as low-cost potential adsorbents for the treatment of wastewater laden with heavy metals

Industrial wastes, such as, fly ash, blast furnace slag and sludge, black liquor lignin, red mud, and waste slurry, etc. are currently being investigated as potential adsorbents for the removal of the heavy metals from wastewater. It was found that modified industrial wastes showed higher adsorption capacity. The application of low-cost adsorbents obtained from the industrial wastes as a replacement for costly conventional methods of removing heavy metal ions from wastewater has been reviewed. The adsorption mechanism, influencing factors, favorable conditions, and competitive ions etc. on the adsorption of heavy metals have also been discussed in this article. From the review, it is evident that certain industrial waste materials have demonstrated high removal capacities for the heavy metals laden with wastewater. However, it is to be mentioned that adsorption capacities of the adsorbents vary depending on the characteristics of the adsorbents, the extent of chemical modification and the concentration of adsorbates. There are also few issues and drawbacks on the utilization of industrial wastes as low-cost adsorbents that have been addressed. In order to find out the practical utilization of industrial waste as low-cost adsorbents on the commercial scale, more research should be conducted in this direction.     

Review on recent advances of carbon based adsorbent for methylene blue removal from waste water

The growth in textile and printing industries proven detrimental to the aquatic environment as the industrial waste containing dye seeped into the ecosystem. A high concentration of dye in water possess negative impacts on water ecosystem and harmful to human health. Removal of methylene blue (MB) dye from industrial waste via adsorption pathway has been widely investigated that promised high efficiency of MB removal. This review will summarize researches published from 2008 to 2019 on the removal of MB using carbon adsorbent with focus will be given on the synthesis and modification of carbon-based materials, and the structural properties influencing the performance of MB adsorption. Summary on the type of material used for the synthesis of carbon materials (activated carbon and biochar) will be included from utilization of the naturally occurring carbon sources such as polymers, biomasses and biowastes, and also sucrose and hydrocarbon gases. Modification of carbon materials such as chemical activation and physical activation; surface grafting to form functionalized surfaces; deposition with metal and magnetic nanoparticles via impregnation; and manufacturing of carbon composites will be discussed on the effects to promote MB adsorption and desorption. Another type of carbon adsorbents such as porous carbon; graphitic carbons including graphite, graphene, graphene oxide, and carbon nitride (g-C₃N₄); and finally nanocarbon in the form of nanotube, nanorod and nanofiber; will be included in the review with details on the synthesis method and the correlation between structural properties and adsorption activity. The regeneration process to increase the life cycle of carbon adsorbent will also be discussed based on two regeneration pathway i.e. a thermal degradation and desorption on MB. Finally the thermodynamics, kinetics, and the adsorption models of MB on carbon adsorbent will be discussed in this review.     

Recent advances in the use of graphene-family nanoadsorbents for removal of toxic pollutants from wastewater

Adsorption technology is widely considered as the most promising and robust method of purifying water at low cost and with high-efficiency. Carbon-based materials have been extensively explored for adsorption applications because of their good chemical stability, structural diversity, low density, and suitability for large scale production. Graphene – a single atomic layer of graphite – is the newest member in the family of carbon allotropes and has emerged as the “celeb” material of the 21st century. Since its discovery in 2004 by Novoselov, Geim and co-workers, graphene has attracted increased attention in a wide range of applications due to its unprecedented electrical, mechanical, thermal, optical and transport properties. Graphene's infinitely high surface-to-volume ratio has resulted in a large number of investigations to study its application as a potential adsorbent for water purification. More recently, other graphene related materials such as graphene oxide, reduced graphene oxide, and few-layered graphene oxide sheets, as well as nanocomposites of graphene materials have also emerged as a promising group of adsorbent for the removal of various environmental pollutants from waste effluents. In this review article, we present a synthesis of the current knowledge available on this broad and versatile family of graphene nanomaterials for removal of dyes, potentially toxic elements, phenolic compounds and other organic chemicals from aquatic systems. The challenges involved in the development of these novel nanoadsorbents for decontamination of wastewaters have also been examined to help identify future directions for this emerging field to continue to grow.     

Equilibrium uptake and sorption dynamics for the removal of a basic dye (basic red) using low-cost adsorbents

Waste carbon slurries (generated in fertilizer plants) and blast furnace slag (generated in steel plants) have been converted into low-cost potential adsorbents. The adsorbents have been characterized and tried for the removal of the dye basic red from wastewater. Studies were performed at different pH to find the pH at which maximum adsorption occurs. Equilibrium isotherms were determined to assess the maximum adsorption capacity of the adsorbents. Adsorption capacities are compared for activated carbon developed from fertilizer waste and activated slag developed from blast furnace waste. The adsorption data are correlated with Freundlich and Langmuir isotherms in each system. The kinetics of adsorption depends on the adsorbate concentration and the physical and chemical characteristics of the adsorbent. Studies were conducted to delineate the effect of pH, temperature, initial absorbate concentration, particle size of the adsorbent, and solid-to-liquid ratio. The adsorption of basic red was found to be endothermic and first-order in nature.     

Adsorption of Safranin-T from wastewater using waste materials- activated carbon and activated rice husks

Textile effluents are major industrial polluters because of high color content, about 15% unfixed dyes and salts. The present paper is aimed to investigate and develop cheap adsorption methods for color removal from wastewater using waste materials activated carbon and activated rice husk-as adsorbents. The method was employed for the removal of Safranin-T and the influence of various factors such as adsorbent dose, adsorbate concentration, particle size, temperature, contact time, and pH was studied. The adsorption of the dye over both the adsorbents was found to follow Langmuir and Freundlich adsorption isotherm models. Based on these models, different useful thermodynamic parameters have been evaluated for both the adsorption processes. The adsorption of Safranin-T over activated carbon and activated rice husks follows first-order kinetics and the rate constants for the adsorption processes decrease with increase in temperature.     

Removal of malachite green by adsorbents from paper industry waste materials

The objective of this work is to study the removal of malachite green (MG) from water by adsorbents obtained from pyrolysis of two paper industry waste materials: one de-inking paper sludge (HP) and one organic sludge from virgin pulp mill (RT). Both adsorbents showed elevated MG removal. Maximum adsorption Q ₀ obtained by Langmuir equation was higher for the adsorbent from HP (HP-3, 982 mg/g) than RT (RT-3, 435 mg/g). However, K _L (Langmuir) and 1/n (Freundlich) indicated that affinity and intensity of adsorption is higher for the adsorbents from RT. Thermal analysis (TG, DTG and DTA) of adsorbents before and after MG removal was performed in N₂ atmosphere.     

ADSORPTION OF PHENOL AND Pb^2＋ FROM AQUEOUS SOLUTIONS BY A NEW DI-FUNCTION ADSORBENT WITH SULFHYDRYL GROUPS

A new di-function adsorbent （JN-3） was prepared by sulfhydryl modified. Comparing with Amberlite XAD-4 and NDA-150, the equilibrium adsorption for phenol on the JN-3 from aqueous solutions was tested, perfect adsorption capacity was shown. Pb^2＋ can be also removed by JN-3 because of the chelate interaction between sulfhydryl groups and metal ions. This adsorbent could be used in removal of combine pollutants such as phenolic compounds and heavy metal ions from waste streams.     

Adsorption kinetic and isotherm studies of Azure A on various activated carbons derived from agricultural wastes

The present study narrates the eminent role of agricultural wastes as adsorbents viz., Indian almond shell carbon (IASC), ground nut shell carbon (GSC), areca nut shell carbon (ASC), tamarind shell carbon (TSC) and cashew nut shell carbon (CSC) for the removal of Azure A (AA) dye from waste water. Different experimental parameters such as effect of initial concentration, contact time, dose, pH and particle size have been studied. The experimental results were analysed using Freundlich, Langmuir, Temkin, Redlich–Peterson and Dubinin–Radushkevich isotherm models. Different kinetic equations (first order, pseudo first order and pseudo second order) were applied to study the adsorption kinetics of AA on various activated carbons. Surface morphology of the adsorbents before and after adsorption is studied by Scanning Electron Microscopy (SEM). FT-IR studies revealed the presence of functional groups of dye on the adsorbents. It is inferred from the experimental result that the activated carbons (IASC, GSC, ASC, TSC and CSC) from agricultural wastes can be applied as an adsorbent substitute to commercial activated carbon (CAC) in the removal of AA dye from waste water.     

Ingenious bioorganic adsorbents for the removal of distillery based pigment-melanoidin: preparation and adsorption mechanism

Melanoidins are composite biopolymers which consist of amino carbonyl compounds which are the major coloring and polluting elements of distillery effluent. In this study, a synthetic melanoidin was used as a model for natural melanoidins, the chief colorant of the effluent. Deportations of melanoidins were investigated using both natural adsorbents and constructed microbial consortia based adsorbents and denoting it using the adsorption isotherms and SEM analysis. A review enabled us to assess about the valuation of the prepared low cost adsorbent and microbial coated adsorbents and for the treatment of the synthetic melanoidin solution. Based on the performances, both Microbial Coated Commercially Activated Carbon (MCCAC) and Commercially Activated Carbon (CAC) were better when compared with the other adsorbents at lower melanoidin concentrations; however, at higher melanoidin concentration, MCCAC performed better. The utilization of CAC for the removal of melanoidins may be cost competitive; hence Microbial Coated Procured Prosopsis Activated Carbon (MCPPAC) can be used as a substitute for the removal systems. Therefore, the microbial coated adsorbents can be a remedy for the removal of color through expatriation of melanoidin from the distillery effluents.     

超分子大环化合物用于染料吸附的研究进展

染料在许多工业领域中的长期广泛使用,带来了严重的环境水污染问题,威胁人类健康,因此有效地从水中去除染料是亟待解决的问题。吸附由于具有高效、简单和低成本的优点而成为降低水中染料含量最有吸引力的技术之一。吸附剂的选择对染料的高效吸附至关重要。具有大环空腔的超分子大环化合物作为主体分子对很多客体分子都具有较强的吸附作用,其作为染料吸附剂得到了极其广泛的关注。该文综述了基于大环化合物的吸附剂的制备及用于水体中染料去除的研究,对各种吸附剂的吸附性能进行了讨论,并对基于大环化合物的染料吸附剂的未来发展提出展望。     

A comparative adsorption study with different industrial wastes as adsorbents for the removal of cationic dyes from water

Four adsorbents have been prepared from industrial wastes obtained from the steel and fertilizer industries and investigated for their utility to remove cationic dyes. Studies have shown that the adsorbents prepared from blast furnace sludge, dust, and slag have poor porosity and low surface area, resulting in very low efficiency for the adsorption of dyes. On the other hand, carbonaceous adsorbent prepared from carbon slurry waste obtained from the fertilizer industry was found to show good porosity and appreciable surface area and consequently adsorbs dyes to an appreciable extent. The adsorption of two cationic dyes, viz., rhodamine B and Bismark Brown R on carbonaceous adsorbent conforms to Langmuir equation, is a first-order process and pore diffusion controlled. As the adsorption of dyes investigated was appreciable on carbonaceous adsorbent, its efficiency was evaluated by comparing the results with those obtained on a standard activated charcoal sample. It was found that prepared carbonaceous adsorbent exhibits dye removal efficiency that is about 80-90% of that observed with standard activated charcoal samples. Thus, it can be fruitfully used for the removal of dyes and is a suitable alternative to standard activated charcoal in view of its cheaper cost.     

Residue valorization: Preparation of recyclable organic amine adsorbent using laterite residue

This study focuses on exploiting the main component of traditional nickel metallurgical waste for use as a valuable material that can be applied in the removal of organic amines from water systems. Silicon compounds from metallurgic waste were converted into dissolvable sodium silicate by roasting the waste with alkali. Silica with adsorption capacity was combined with magnetic NiFe cores by the carbonation decomposition of purified silicate solution. The composite magnetic adsorbent was characterized, and its adsorption mechanism for organic amines was investigated. The effects of the initial trimethylamine concentration, contact time and temperature on the adsorption efficiency of the composite adsorbent towards trimethylamine were investigated. It was found that the adsorption fit the Freundlich mode well. The adsorption kinetics can be described by a pseudo-second-order kinetic model. The adsorption capacity reached 55.8 μg/mg at 293 K. The use of metallurgical waste to prepare the magnetic composite adsorbent has three advantages, which include benefiting the environment by reducing the amount of solid waste and costs associated with constructing and maintaining storage facilities, generating valuable products in an economical manner and conveniently recycling used adsorbents to avoid secondary pollution.     

Hierarchically Annular Mesoporous Carbon Derived from Phenolic Resin for Efficient Removal of Antibiotics in Wastewater

Antibiotics have become a new type of environmental pollutant due to their extensive use. High-performance adsorbents are of paramount significance for a cost-effective and environmentally friendly strategy to remove antibiotics from water environments. Herein, we report a novel annular mesoporous carbon (MCN), prepared by phenolic resin and triblock copolymer F127, as a high-performance adsorbent to remove penicillin, streptomycin, and tetracycline hydrochloride from wastewater. The MCNs have high purity, rich annular mesoporosity, a high surface area (605.53 m²/g), and large pore volume (0.58 cm³/g), improving the adsorption capacity and facilitating the efficient removal of penicillin, streptomycin, and tetracycline hydrochloride from water. In the application of MCNs to treat these three kinds of residual antibiotics, the adsorption amounts of tetracycline hydrochloride were higher than penicillin and streptomycin, and the adsorption capacity was up to 880.6 mg/g. Moreover, high removal efficiency (99.6%) and excellent recyclability were achieved. The results demonstrate that MCN adsorbents have significant potential in the treatment of water contaminated with antibiotics.     

Adsorption of Sr by immobilized microorganisms

Wastewaters from numerous industrial and laboratory operations can contain toxic or undesirable components such as metal ions, which must be removed before discharge to surface waters. Adsorption processes that have high removal efficiencies are attractive methods for removing such contaminants. For economic operations, it is desirable to have an adsorbent that is selective for the metal contaminant of interest, has high capacity for the contaminant, has rapid adsorption kinetics, can be economically produced, and can be regenerated to a concentrated waste product or decomposed to a low-volume waste. Selected microorganisms are potentially useful adsorbents for these applications because they can be inexpensive, have high selectivities, and have high capacities for adsorption of many heavy metals, which are often problems in a variety of industries.     

THERMODYNAMIC STUDY OF ADSORPTION OF PHENOLIC COMPOUNDS FROM AQUEOUS SOLUTION BY A WATER-COMPATIBLE HYPERCROSSLINKED POLYMERIC ADSORBENT

Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p-nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.     

Utilization of Waste Biomass (Kitchen Waste) Hydrolysis Residue as Adsorbent for Dye Removal: Kinetic,Equilibrium, and Thermodynamic Studies

Kitchen waste hydrolysis residue (KWHR), which is produced in the bioproduction process from kitchen waste (KW), is usually wasted with potential threats to the environment. Herein, experiments were carried out to evaluate the potential of KWHR as adsorbent for dye (methylene blue, MB) removal from aqueous solution. The adsorbent was characterized using FT-IR and SEM. Adsorption results showed that the operating variables had great effects on the removal efficiency of MB. Kinetic study indicated pseudo-second-order model was suitable to describe the adsorption process. Afterwards, the equilibrium data were well fitted by using Langmuir isotherm model, suggesting a monolayer adsorption. The Langmuir monolayer adsorption capacity was calculated to be 110.13 mg/g, a level comparable to some other low-cost adsorbents. It was found that the adsorption process of MB onto KWHR was spontaneous and exothermic through the estimation of thermodynamic parameters. Thus, KWHR was of great potential to be an alternative adsorbent material to improve the utilization efficiency of bioresource (KW) and lower the cost of adsorbent for color treatment.     

Selective adsorption of refractory sulfur species on active carbons and carbon based CoMo catalyst

Adsorption technique could be a reliable alternative in removing to a certain remarkable extent the sulfur species from the feedstock of petroleum oil. The performance of various carbons on adsorption of model sulfur compounds in a simulated feed solution and the sulfur containing compounds in the real gas oil was evaluated. The adsorption experiments have been carried out in a batch scale at ambient temperature and under the atmospheric pressure. In general, the most refractory sulfur compounds in the hydrotreatment reactions were selectively removed and adsorbed. It was found that the adsorbents affinities to dibenzothiophene and 4,6-dimethyldibenzothiophene were much more favored and pronounced than the aromatic matrices like fluorene, 1-methylnaphthalene and 9-methylanthracene. Among the sulfur species, 4,6-dimethyldibenzothiophene was the highest to be removed in terms of both selectivity and capacity over all the present adsorbents. The studied adsorbents showed significant capacities for the polyaromatic thiophenes. The electronic characteristics seem to play a certain role in such behavior. Regeneration of the used adsorbent was successfully attained either by washing it with toluene or by the release of the adsorbates through heat treatment. A suggested adsorptive removal process of sulfur compounds from petroleum distillate over carbon supported CoMo catalyst was discussed.