Electorchemical Studies of Cytochrome c on Electodes Modified by Single—Wall Carbon Naotubes

Single-wall carbon nanotubes(SWNTs) modified gold electrodes were prepared by using two different methods.The electrochemical behavior of cytochrome c on the modified gold electrodes was investigated.The first kind of SWNT-modified electrode (noted as SWNT/Au electrode)was prepared by the adsorption of carboxylterminated SWNTs from DMF dispersion on the gold electrode.The oxidatively processed SWNT tips were covalently modified by coupling with amines (AET) to form amide linkage.Via Au-S chemical bonding,the self-assembled monolayer of thiol-unctionalized nanotubes on gold surface was fabricated so as to prepare the others SWNT-modified electrode (noted as SWNT/AET/Au electrode).It was shown from cyclic voltammetry cxperiments that cytochrome c exhibited direct electrochemical responses on the both electrodes, but only the current of controlled diffusion existed on the SWNT/Au electrode while both the currents of controlled diffusion and adsorption of cytochrome c occurred on the SWNT/AET/Au electrode.Photoelastic Modulation Infared Reflection Absorpthion Spectroscopy (PEM-IRRAS) and Quartz Crystal Microbalance (QCM) were employed to verify the adsorption of SWNTs on the gold electrodes.The results proved that SWNTs could enhance the direct electron transfer proecss between the electrodes and redox proteins.     

Cholesterol biosensor based on amino-undecanethiol self-assembled monolayer using surface plasmon resonance technique

Cholesterol oxidase has been covalently immobilized onto 11-amino-1-undecanethiol hydrochloride (AUT) self-assembled monolayer (SAM) fabricated on gold (Au) substrates using glutaraldehyde as a cross-linker. These ChOx/AUT/Au bioelectrodes characterized using contact angle (CA) measurements; electrochemical technique and atomic force microscopy (AFM) have been utilized for the estimation of cholesterol in solution using the surface plasmon resonance (SPR) technique. These biosensing electrodes exhibiting linearity from 50 to 500 mg/dL of cholesterol in solution and sensitivity of 1.23 m0/(mg dL), can be used more than 20 times and have a shelf life of about 10 weeks when stored at 4 degrees C.     

Surface‐Confined Electropolymerization of Methylene Blue on Gold Electrodes

We report on the electrochemical behaviour and electropolymerization of self‐assembled monolayers (SAMs) of methylene blue (MB) on gold electrodes. The SAMs of MB on gold electrodes were prepared by immersing the substrates into a solution of 1.0 mM MB in absolute ethanol for different times at room temperature. Cyclic voltammetry experiments exhibited that reductive desorption of MB monolayer takes place at three different potentials on polycrystalline gold electrodes, while reductive desorption of MB monolayer consists of only one peak on single crystal Au(111) substrates. Calculated charge densities for different immersion times indicated that optimal immersion time for self‐assembly of MB is 96 h. Electropolymerization of SAMs of MB on gold electrode was achieved by applying 0.95 V for 1 s in 0.1 M borate buffer solution (pH: 9.0). It was observed that poly(MB) monolayers are highly stable in acidic media. ATR‐FTIR and UV‐vis spectra exhibited differences between monomer and polymer monolayers, which are attributed to surface‐confined electropolymerization. STM image of poly(MB) monolayer on Au(111) substrate revealed a surface that is covered by well‐ordered, collateral nanowires with an average size of 3 nm.     

Nanoparticle-mediated electron transfer across ultrathin self-assembled films

The electrochemical behavior of arrays of Au nanoparticles assembled on Au electrodes modified by 11-mercaptoundecanoic acid (MUA) and poly-L-lysine (PLYS) was investigated as a function of the particle number density. The self-assembled MUA and PLYS layers formed compact ultrathin films with a low density of defects as examined by scanning tunneling microscopy. The electrostatic adsorption of Au particles of 19 +/- 3 nm on the PLYS layer resulted in randomly distributed arrays in which the particle number density is controlled by the adsorption time. In the absence of the nanoparticles, the dynamics of electron transfer involving the hexacynoferrate redox couple is strongly hindered by the self-assembled film. This effect is primarily associated with a decrease in the electron tunneling probability as the redox couple cannot permeate through the MUA monolayer at the electrode surface. Adsorption of the Au nanoparticles dramatically affects the electron-transfer dynamics even at low particle number density. Cyclic voltammetry and impedance spectroscopy were interpreted in terms of classical models developed for partially blocked surfaces. The analysis shows that the electron transfer across a single particle exhibits the same phenomenological rate constant of electron transfer as for a clean Au surface. The apparent unhindered electron exchange between the nanoparticles and the electrode surface is discussed in terms of established models for electron tunneling across metal-insulator-metal junctions.     

Single‐Walled Carbon Nanotubes Modified Gold Electrodes as an Impedimetric DNA Sensor

A gold surface modified with a self‐assembled monolayer of 11‐amino‐1‐undecanethiol (AUT) was used for the covalent immobilization of oxidized single‐walled carbon nanotubes (SWNTs). The as‐described SWNTs‐modified substrate was subsequently used to attach single‐stranded deoxyribonucleic acid (ssDNA) used as a substrate for DNA hybridization. Electrochemical impedance spectroscopy measurements were performed to follow the DNA hybridization process by using the redox couple [Fe(CN)₆]^3−/4− as a marker ion. Specifically, changes in charge transfer resistance obtained from the Nyquist plots were used as the sensing parameter of DNA hybridization. The substrate sensitivity towards changes in target DNA concentration, its selectivity toward different DNA sequences and its reusability are successfully demonstrated in this report.     

Unmodified supported thiol/lipid bilayers: studies of structural disorder and conducting mechanism by cyclic voltammetry and AC impedance.

Supported thiol/lipid bilayer assembly, one of the most spectacular bilayer systems in recent years, has provided a good model to study biomembranes because of its high mechanical stability. In this work, the structural and conducting property of unmodified Au supported octadecanethiol/phosphatidylcholine bilayers were investigated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The forming process of bilayer was monitored by capacitance plane plot. The normalized membrane capacitance of supported bilayer is 0.52 microF cm(-2). Kinetically controlled voltammograms determined by Butler-Volmer equation were obtained for both thiol monolayer and thiol/lipid bilayer in linear sweep voltammetry. Results of EIS experiment indicate that collapsed sites and pinhole defects exist in thiol monolayer and lipid monolayer, respectively. The difference between the values of experimental and theoretical standard electron transfer rate constant indicates that the conducting mechanism of Au supported thiol monolayer is electron tunneling at collapsed sites. The conducting mechanism of Au supported thiol/lipid bilayer is attributed as the following: the electroactive species could diffuse through pinholes in the lipid monolayer and reach collapsed sites in thiol monolayer, where electron transfer occurs via a tunneling process. The fractional coverage of the lipid monolayer measure by EIS experiments is about 0.98 or higher.     

Studies on Gold Electrode Modified by Alkanethiol SAM

Self-assembled monolayer (SAM) on gold electrode has been extensively studied in electrochemistry. It is a good model for study the electron transfer through the SAM from metal to redox couple in the solution or tethered on the surface of monolayer. For a pinehole-free monolayer, electron tunneling is considered as the mechanism of electron transfer through the film. The detail of the process in electrochemistry is not clear though there are a lot of publications on SAM research. In this paper,the electrochemical behavior of pinehole-free alkanethiol modified SAM electrode was investigated at different potential in the solution containing various concentration Fe(CN)₆^3-/4- ions. It was found that the apparent resistance could be attributed mainly to the resistance of SAM film.     

Electrochemical and STM studies of 1-thio-β-D-glucose self-assembled on a Au(111) electrode surface

In this study, a Au(111) electrode is functionalized with a monolayer of 1-thio-β-D-glucose (β-Tg), producing a hydrophilic surface. A monolayer of β-Tg was formed on a Au(111) surface by either (1) potential-assisted deposition with the thiol in a supporting electrolyte or (2) passive incubation of a gold substrate in a thiol-containing solution. For each method, the properties of the β-Tg monolayer were investigated using cyclic voltammetry (CV), differential capacitance (DC), and chronocoulometry. In addition, electrochemical scanning tunneling microscopy (EC-STM) was used to obtain images of the self-assembled monolayer with molecular resolution. Potential-assisted assembly of β-Tg onto a Au(111) electrode surface was found to be complicated by oxidation of β-Tg molecules. The EC-STM images revealed formation of a passive layer containing honeycomb-like domains characteristic of a formation of S(8) rings, indicating the S-C bond may have been cleaved. In contrast, passive self-assembly of thioglucose from a methanol solution was found to produce a stable, disordered monolayer of β-Tg. Since the passive assembly method was not complicated by the presence of a faradaic process, it is the method of choice for modifying the gold surface with a hydrophilic monolayer.     

Scanning electrochemical microscopy determination of organic soluble MPC electron-transfer rates

In this paper, we describe a novel method for measuring the forward heterogeneous electron-transfer rate constant (kf) through the thiol monolayer of gold monolayer protected clusters (MPCs) in solution using scanning electrochemical microscopy (SECM). Applying the equations for mixed mass-transfer and electron-transfer processes, we develop a new formula using only the diffusion coefficient and the tip radius and use it as part of a new method for evaluating SECM approach curves. This method is applied to determine the electron-transfer rates from a series of SECM approach curves for monodisperse hexanethiol MPCs and for polydisperse hexanethiol, octanethiol, decanethiol, dodecanethiol, and 2-phenyethylthiol gold MPCs. Our results show that as the alkanethiol length increases the rate of electron transfer decreases in a manner consistent with the previously proposed tunneling mechanism for the electron transfer in MPCs. However, the effective tunneling coefficient, Beta, is found to be only 0.41 A-1 for alkanethiol passivated MPCs compared to typical values of 1.1 A-1 for alkanethiols as self-assembled monolayers on two-dimensional gold substrates. Similar SECM approach curve results for Pt and Au MPCs indicate that the electron-transfer rate is dependent mostly on the composition of the thiol layer and not on differences in the core metal.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

Ultrathin monolayer of rubrene on Au(111) induced by charge transfer

An ultrathin self‐assembly monolayer of rubrene on Au(111) has been fabricated and studied by scanning tunneling microscopy. The apparent thickness of such monolayer is 0.08 nm and close to the radius of a carbon atom. Moreover, the rubrene molecules within the second layer prefer adsorbing on to the positions corresponding to the herringbone structure underneath the Au(111)–() while the Au surface is fully covered by a monolayer of rubrene. With the assistant with theoretical simulations, we reveal that small apparent height of such monolayer is due to the coupling between the molecular orbitals and the gold surface. About 0.237 electron per rubrene molecule is transferred to the surface, and as a consequence, an interfacial dipole is formed on the rubrene/Au interface. The formation of such interfacial dipole induced by charge transfer from molecules to surfaces is believed to be applied in organic molecules adsorbed on metal surfaces. Copyright © 2011 John Wiley & Sons, Ltd.     

DNA Assisted Assembly of Multisegmented Nanowires

This work demonstrates a highly specific and selective assembly of multisegmented nanowires on prepatterned gold electrodes using DNA hybridization. Multisegmented Au/Pd/Au nanowires were synthesized using template‐directed electrodeposition. Two complementary single‐stranded DNAs modified with thiol tags adsorb on gold electrodes and gold segments of nanowires, and enable the nanowires to assemble across electrodes. The assembled nanowires show ohmic contact with minimum contact resistance. Using these nanowires, the temperature dependent electrical resistance and the sensing performance toward hydrogen were investigated. The temperature coefficient of resistance of nanowires was lower than bulk polycrystalline counterpart, because of higher electron scattering at the surface and grain boundaries of nanowires. The nanowires were sensitive toward hydrogen gas at room temperature with a detection limit of 0.5%.     

Direct Electrochemical Study of the Redox Species in RC Protein and its Mutants Immobilized in Self-Assembly Monolayers

4-Aminothiophenol (4-ATP) self-assembled monolayer (SAM) was immobilized on gold electrode. The multi-layered protein film electrode was prepared to rinse the 4-ATP-Au electrode in poly-styrenesulfonate (PSS) and poly-dimerthyldiallylammonium chloride (PDDA) successively, then soaked in a solution containing photosynthetic reaction center (RC) protein from Rhodobacter sphaeriodes or its pigment-replaced mutant. Thus, RC was found embedded in an ordered-orientation film. In cyclic voltammetry (CV) and square wave voltammetry (SWV), Au electrode gave a series of electrochemical signals due to the redox reaction of RC protein or its mutants. Intermolecular direct electron transfer (ET) was studied in this work.     

In situ STM imaging and direct electrochemistry of Pyrococcus furiosus ferredoxin assembled on thiolate-modified Au111 surfaces

We have addressed here electron transfer (ET) of Pyrococcus furiosus ferredoxin (PfFd, 7.5 kDa) in both homogeneous solution using edge plane graphite (EPG) electrodes and in the adsorbed state by electrochemistry on surface-modified single-crystal Au111 electrodes, This has been supported by surface microscopic structures of PfFd monolayers, as revealed by scanning tunneling microscopy under potential control (in situ STM). Direct ET between PfFd in phosphate buffer solution, pH 7.9, and EPG electrodes is observed in the presence of promoters. Neomycin gives rise to a pair of redox peaks with a formal potential of ca -430 mV (vs SCE), corresponding to [3Fe-4S]1+/0. The presence of an additional promoter, which can be propionic acid, alanine, or cysteine, induces a second pair of redox peaks at approximately -900 mV (vs SCE) arising from [3Fe-4S]0/1-. A robust neomycin-PfFd complex was detected by mass spectrometry. The results clearly favor an ET mechanism in which the promoting effect of small organic molecules is through formation of promoter-protein complexes. The interaction of PfFd with small organic molecules in homogeneous solution offers clues to confine the protein on the electrode surface modified by the same functional group monolayer and to address diffusionless direct electrochemistry, as well as surface microstructures of the protein monolayer. PfFd molecules were found to assemble on either mercaptopropionic acid (MPA) or cysteine-modified Au111 surfaces in stable monolayers or submonolayers. Highly ordered (2 radical 3 x 5)R30 degrees cluster structures with six MPA molecules in each cluster were found by in situ STM. Individual PfFd molecules on the MPA layer are well resolved by in situ STM. Under Ar protection reversible cyclic voltammograms were obtained on PfFd-MPA/Au111 and PfFd-cysteine/Au111 electrodes with redox potentials of -220 and -201 mV (vs SCE), respectively, corresponding to the [Fe3S4]1+/0 couple. These values are shifted positively by 200 mV relative to homogeneous solution due to interactions between the promoting layers and the protein molecules. Possible mechanisms for such interactions and their ET patterns are discussed.     

Size-tuneable and micro-patterned iron nanoparticles derived from biomolecules via microcontact printing SAM-modified substrates and controlled-potential electrolyses

Site-selected and size-controlled iron nanoparticles were prepared on coplanar surfaces via microcontact printing of SAM-modified Au/mica electrodes and controlled-potential electrolytic reactions using ferritin biomolecules. Ferritin molecules packed like a full monolayer on 6-amino-1-hexanethiol (AHT)- and 11-amino-1-undecanethiol (AUT)-modified Au/mica surface via electrostatic interactions, which did not depend on the chain length of the amino terminal alkane thiols. After heat-treatment at 400 degrees C for 60 min, iron oxide nanoparticles (ca. 5 nm in diameter) derived from ferritin cores were observed at the Au/mica surface by atomic force microscopy (AFM). On the study on the electrochemistry of ferritin immobilized onto AHT- and AUT-modified Au/mica electrodes, the redox response of the ferritin immobilized AHT-modified electrode was clearly observed. On the other hand, no redox peak for ferritin was obtained at the AUT-modified electrode. The electron transfer between ferritin and the electrode through the AUT membrane could not take place. The difference in the electrochemical response of ferritin immobilized onto AHT- and AUT-modified Au/mica was caused by the chain length of the amino terminal alkane thiols. Uniform patterns of AHT and AUT on the Au/mica electrode surface were performed by use of a poly(dimethylsiloxane) (PDMS) stamp. After the immobilization of ferritin onto both AHT- and AUT-modified electrode surfaces, the modified electrode was applied to a -0.5 V potential for 30 min in a phosphate buffer solution. After this procedure, the PDMS stamp patterning image appeared by scanning electron microscopy (SEM) image. The SEM results induced by the size change of the ferritin core consisting of iron(III) by electrolysis.     

荧光性自组装双层膜的制备及其性能研究

借助Au-S化学键的作用,在金基底上组装DL-半胱氨酸,利用DL-半胱氨酸与1-萘胺乙酸(NAA)的静电吸引作用在金表面间接组装荧光试剂NAA,从而构建了双层自组装膜NAA/Cys/Au.该自组装膜有较强的荧光信号,能被Cu²⁺猝灭,并具有较好的可逆再生性能,可用于超痕量铜离子的界面荧光测定,对Cu²⁺的检出下限为7.87×10^-11mol/L.同时采用电化学、荧光光谱及电子能谱等方法表征自组装膜的结构,并采用电化学阻抗谱技术和循环伏安法研究自组装膜在K₃[Fe(CN)₆]/K₄[Fe(CN)₆]溶液中的电化学行为研究.结果表明,金表面组装的单层膜具有良好的“针孔”效应,组装上荧光试剂之后形成的无“针孔”缺陷的自组装双层膜对溶液与基底间的界面电子转移有强烈的阻碍作用.     

Separation of pinhole and tunneling electron transfer processes at self-assembled polymeric monolayers on gold electrodes

Self-assembled monolayers of poly(3-alkylthiophene) on gold electrodes are examined by cyclic voltammetry in solutions containing electroactive species. Two well-separated electron transfer processes, namely, electron tunneling through the monolayer and electron exchange at pinholes (defects) of the monolayer are observed. The voltammetric responses of the pinhole electron transfer process take place around the standard potential of the electroactive species and resemble those of a nanoelectrode ensemble of independent individual nanoelectrodes. The voltammetric characteristics of the electron tunneling agree well with predictions of the Marcus theory. Satisfactory values of tunneling coefficient, standard rate constant and organization energy are derived from the voltammetric data.     

Preparation and characterization of polystyrene/Ag core-shell microspheres--a bio-inspired poly(dopamine) approach

In this work, we have systematically investigated the formation and characterization of Self-assembled Monolayer (SAM) films of several silanes on indium tin oxide (ITO) surfaces. Silane molecules having different domains namely substrate binding domain (siloxanes), electron transport region (aliphatic and aromatic spacer) and terminal functional groups (-SH, -CH(3) groups) are employed for the study in order to tune the electron transfer (ET) behaviour across SAM modified electrode-electrolyte interface. Structural characterization of these monolayer films is carried out using X-ray photoelectron spectroscopy (XPS) studies. Wettability (hydrophilic and hydrophobic nature) of such modified electrodes is evaluated using contact angle measurements. ET behaviour of these modified electrodes is investigated by electrochemical techniques namely cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K(4)Fe(II)(CN)(6)|K(3)Fe(III)(CN)(6) redox couple as a probe. Disappearance of redox peaks in the CV measurements and formation of semicircle having a higher charge transfer resistance (R(ct)) values during EIS studies suggest that the resultant monolayer films are compact, highly ordered with very low defects and posses good blocking property with less pinholes. The heterogeneous ET rate constant (k) values are determined from EIS by fitting them to an appropriate equivalent circuit model. Based on our results, we comment on tuning the ET behaviour across the interface by a proper choice of spacer region.     

Enhanced catalytic activity of Fe phthalocyanines linked to Au(111) via conjugated self-assembled monolayers of aromatic thiols for O2 reduction

We have obtained and characterized self assembled monolayers (SAMs) of 4-aminothiophenol (4-ATP) and 1-(4-mercaptophenyl)-2,6-diphenyl-4-(4-pyridyl)pyridinium tetrafluoroborate (MDPP) functionalized with iron phthalocyanine (FePc) adsorbed on gold (111) electrodes. The catalytic activity of these SAMs/FePc was examined for the reduction of O₂ in aqueous media (pH = 4) and compared with that of bare gold and of gold coated directly with FePc molecules. Scanning tunneling microscopy (STM) studies confirm the functionalization of the 4-ATP by FePc. The electrocatalytic studies carried out with Au/FePc, Au/4-ATP/FePc and Au/MDPP/FePc electrodes show that the O₂ reduction takes place by a 4-electron transfer to give water in contrast to a 2-electron-transfer process observed on the bare gold. The activity of the electrodes increases as follows: Au < Au/FePc < Au/4-ATP/FePc < Au/MDPP/FePc.     

QCM and EC-SPR Studies of Cytochrome cSelf-assembled on Au Electrode and Enhancement of SPR Signal by Au Nanoparticles

Quartz crystal microbalance(QCM) and cyclic voltammetry(CV) were used to characterize the monolayer of cytochrome c(Cyt c), which was adsorbed on gold film modified with alkanethiol mixed monolayer. A direct comparison of protein surface coverages calculated from QCM and cyclic voltammetric measurements illustrates that the ratio of the electroactive Cyt c to the total surface-confined Cyt cis 34%, which suggests that the orientation is a main factor affecting the electroactivity of Cyt c. Moreover, surface plasmon resonance(SPR) measurement combined with CV “in situ” was used to investigate the conformational change of Cyt c in the redox process. Besides, Au nanoparticles(Au NPs) were adsorbed on the surface of Cyt c. The result indicates that Au NPs promote electron transfer between Cyt c and the gold electrode, and SPR result suggests Au NPs enhance SPR signal.