The fabrication of stable gold nanoparticle-modified interfaces for electrochemistry

Forming stable gold nanoparticle (AuNP)-modified surface is important for a number of applications including sensing and electrocatalysis. Herein, tethering AuNPs to glassy carbon (GC) surfaces using surface bound diazonium salts is investigated as a strategy to produce stable AuNP surfaces. GC electrodes are first modified with 4-aminophenyl (GC-Ph-NH(2)), and then the terminal amine groups are converted to diazonium groups by incubating the GC-Ph-NH(2) interface in NaNO(2) and HCl solution to form a 4-phenyl diazonium chloride-modified interface (GC-Ph-N(2)(+)Cl(-)). Subsequently AuNPs are immobilized on the interface by electrochemical reduction to give a 4-phenyl AuNP-modified interface (GC-Ph-AuNP). For comparison, 4-aminophenyl AuNP- and 4-thiophenol AuNP-modified GC interfaces (GC-Ph-S-AuNP and GC-Ph-NH-AuNP), in which AuNPs are tethered to the surfaces by forming S-Au and NH-Au bond, respectively, were also prepared. Cyclic voltammetry, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy are used to characterize these fabricated interfaces. The AuNP on GC-Ph-AuNP surfaces demonstrate good stability under sonication in Milli-Q water, during electrochemical treatment in 0.05 M H(2)SO(4) solution, and over several weeks. By contrast, the GC-Ph-NH-AuNP and GC-Ph-S-AuNP surfaces showed significant particle losses under equivalent conditions.     

Lack of nano size effect on electrochemistry of dopamine at a gold nanoparticle modified indium tin oxide electrode

Nanometer sized materials have been shown to possess excellent chemical and electrochemical catalytic properties. In this work, a gold nanoparticle (AuNP) modified indium tin oxide (ITO) electrode was employed for investigating its electro-catalytic property. AuNP was deposited on the 3-aminopropyltriethoxysilane (APTES) modified ITO electrode by self-assembly, and was characterized by scanning electron microscopy and cyclic voltammetry. Although the electrochemical reaction of dopamine was very sluggish on the ITO/APTES electrode, it was significantly enhanced after AuNP deposition. The cyclic voltammogram exhibited apparent dependence on the surface coverage of 11 nm AuNPs, which could be rationalized by different modes of mass diffusion. Among the different sizes of AuNP investigated, the lowest anodic peak potential was observed on 11 nm AuNP. However, the potential was still about 50 mV more positive than that obtained on a bulk gold electrode of similar geometry. It is therefore concluded that there is no nanometer size effect of AuNP modified ITO on the electrochemistry of dopamine.     

Size-dependence enhancement in electrocatalytic activity of NiHCF-gold nanocomposite: potential application in electrochemical sensing

A nanocomposite of nickel hexacyanoferrate (NiHCF) was made with gold nanoparticles (AuNPs) of two different sizes (20 and 80 nm as AuNP(red) and AuNP(blue) respectively), synthesized via 3-glycidoxypropyltrimethoxysilane mediated reduction of 3-aminopropyltrimethoxysilane treated gold chloride and characterized by scanning electron microscopy and UV-VIS spectroscopy. The size of AuNPs was found to influence the two pairs of reversible voltammetric peaks of cation rich and cation deficient NiHCF. Such influence was identified from cyclic voltammetry of nanocomposite modified electrodes and applications during electrochemical sensing of two different analytes hydrazine and glutathione (GSH). Electrochemical sensing of hydrazine was based on cyclic voltammetry and differential pulse voltammetry (DPV) found as a function of sodium deficient NiHCF and was greatly amplified with increasing AuNPs nanogeometry. NiHCF alone is not an efficient electrode material for GSH analysis at the level required, however, the presence of AuNPs introduces size dependent sensitive and selective detection of GSH. GSH sensing based on linear sweep voltammetry (LSV) was found to be mediated by the potassium rich form of NiHCF redox couple in the presence of AuNPs. The results justified electrochemical detection of these analytes based on a mediated mechanism and support the role of AuNPs for facilitated electrochemical activity of NiHCF based systems as a function of nanogeometry.     

Influence of gold nanoparticle size (2-50 nm) upon its electrochemical behavior: an electrochemical impedance spectroscopic and voltammetric study

The electrochemical behavior of different size gold nanoparticles (AuNPs) was investigated. AuNPs with 2, 5, 10, 15, 20 and 50 nm diameters were immobilized onto a screen printed carbon electrode surface by physical adsorption. The impedimetric response was measured for different diameter AuNPs at a fixed value of their surface area, at the same content of gold (Au) and at the same concentration. In a further experiment, the impedimetric response toward AuNP concentration was measured for each diameter. Impedimetric results were compared with results obtained for the detection of Au by stripping voltammetry. Additionally, variability of active surface area and roughness of different electrodes before and after immobilization of AuNPs were carefully evaluated by means of cyclic voltammetry and laser scanning microscopy. Electrochemical impedance spectroscopy (EIS) is a sensitive technique capable of differentiating the signal generated by AuNPs of different sizes, thus providing useful information for the employment of AuNPs in electrochemical biosensors.     

Electropolymerized polythiophene photoelectrodes with density-controlled gold nanoparticles

A polythiophene thin film was fabricated on gold nanoparticle (AuNP)-deposited indium-tin-oxide (ITO) electrodes with electropolymerization, whereas AuNPs were predeposited on the ITO surface. A photocurrent via photoexcited polythiophene increased with AuNPs which was attributed to the localized surface plasmon resonance. Investigation of the AuNP-density dependence on the relative enhancement of photocurrent revealed the maximum effect at 14% of AuNP-density, while 68% of AuNP-density exhibited smaller photocurrent than the polythiophene electrode without AuNPs. We have revealed that the effects of AuNPs saturate in the fairly low density region, and that the excess AuNPs even in the range of submonolayer resulted in the decrement of photocurrents.     

The Electrochemical Behavior of Gold Nanoparticle‐Tantalum(V) Phthalocyanine Composites: Applications Towards the Electroanalysis of Bisphenol A

The formation of gold nanoparticle (AuNP) composites with tantalum phthalocyanines (TaPc) complexes { 1a and 1b (Figure 1 )} is reported. The TaPc‐AuNPs conjugates were characterised by atomic force microscopy (AFM) and transmission electron microscopy. The AFM analyses show that conjugates of TaPc with AuNPs are more aggregated when compared to AuNPs alone. The conjugates and TaPc complexes were immobilized on a gold electrode by drop and dry method and these were characterized by electrochemical impedance spectroscopy. The charge transfer behaviour of AuNPs was enhanced in the presence of TaPc complexes. All the modified electrodes showed electrocatalytic oxidation of bisphenol A. The limits of detection for complexes 1a and 1 b were 4.78×10^?10 and 2.76×10^?10 mol L^?1, respectively.     

Characterization of Labeled Gold Nanoparticles for Surface-Enhanced Raman Scattering

Noble metal nanoparticles (NP) such as gold (AuNPs) and silver nanoparticles (AgNPs) can produce ultrasensitive surface-enhanced Raman scattering (SERS) signals owing to their plasmonic properties. AuNPs have been widely investigated for their biocompatibility and potential to be used in clinical diagnostics and therapeutics or combined for theranostics. In this work, labeled AuNPs in suspension were characterized in terms of size dependency of their localized surface plasmon resonance (LSPR), dynamic light scattering (DLS), and SERS activity. The study was conducted using a set of four Raman labels or reporters, i.e., small molecules with large scattering cross-section and a thiol moiety for chemisorption on the AuNP, namely 4-mercaptobenzoic acid (4-MBA), 2-naphthalenethiol (2-NT), 4-acetamidothiophenol (4-AATP), and biphenyl-4-thiol (BPT), to investigate their viability for SERS tagging of spherical AuNPs of different size in the range 5 nm to 100 nm. The results showed that, when using 785 nm laser excitation, the SERS signal increases with the increasing size of AuNP up to 60 or 80 nm. The signal is highest for BPT labelled 80 nm AuNPs followed by 4-AATP labeled 60 nm AuNPs, making BPT and 4-AATP the preferred candidates for Raman labelling of spherical gold within the range of 5 nm to 100 nm in diameter.     

Flower-like self-assembly of gold nanoparticles for highly sensitive electrochemical detection of chromium(VI)

We report here the fabrication of a flower-like self-assembly of gold nanoparticles (AuNPs) on a glassy carbon electrode (GCE) as a highly sensitive platform for ultratrace Cr(VI) detection. Two AuNP layers are used in the current approach, in which the first is electroplated on the GCE surface as anchors for binding to an overcoated thiol sol–gel film derived from 3-mercaptopropyltrimethoxysilane (MPTS). The second AuNP layer is then self-assembled on the surface of the sol–gel film, forming flower-like gold nanoelectrodes enlarging the electrode surface. When functionalized by a thiol pyridinium, the fabricated electrode displays a well-defined peak for selective Cr(VI) reduction with an unusually large, linear concentration range of 10–1200 ng L⁻¹ and a low detection limit of 2.9 ng L⁻¹. In comparison to previous approaches using MPTS and AuNPs on Au electrodes, the current work expands the use of AuNPs to the GCE. Subsequent functionalization of the secondary AuNPs by a thiol pyridinium and adsorption/preconcentration of Cr(VI) lead to the unusually large detection range and high sensitivity. The stepwise preparation of the electrode has been characterized by electrochemical impedance spectroscopy (EIS), scanning electronic microscopy (SEM), and IR. The newly designed electrode exhibits good stability, and has been successfully employed to measure chromium in a pre-treated blood sample. The method demonstrates acceptable fabrication reproducibility and accuracy.     

Oxygen reduction reaction features in neutral media on glassy carbon electrode functionalized by chemically prepared gold nanoparticles

Gold nanoparticles (AuNPs) were prepared by chemical route using four different protocols by varying reducer, stabilizing agent, and solvent mixture. The obtained AuNPs were characterized by transmission electronic microscopy (TEM), UV-visible, and zeta potential measurements. From these latter, surface charge densities σ were calculated to evidence the effect of the solvent mixture on AuNP stability. The AuNPs were then deposited onto glassy carbon (GC) electrodes by drop casting, and the resulting deposits were characterized by cyclic voltammetry (CV) in H₂SO₄ and field emission gun scanning electron microscopy (FEG-SEM). The electrochemical kinetic parameters of the four different modified electrodes toward oxygen reduction reaction (ORR) in neutral NaCl-NaHCO₃ media (0.15 M/0.028 M, pH 7.4) were evaluated by rotating disk electrode voltammetry and subsequent Koutecky-Levich treatment. Contrary to what we previously obtained with electrodeposited AuNPs [Gotti et al., Electrochim. Acta 2014], the highest cathodic transfer coefficients β were not obtained on the smallest particles, highlighting the influence of the stabilizing ligand together with the deposit morphology on the ORR kinetics.     

Self-assembled monolayer of an iron(III) porphyrin disulphide derivative on gold

A novel iron(III) porphyrin disulphide derivative have been successfully immobilised on gold surfaces by self-assembly. The redox response of the modified electrodes was compared with the obtained for a similar iron porphyrin in solution, confirming the immobilisation of the metalloporphyrin. The gravimetric data obtained by electrochemical quartz crystal microbalance (EQCM) during adsorption allowed an estimation of the electrode coverage, providing further evidence for the formation of the porphyrin SAM. The modified electrodes were also measured by conventional and imaging ellipsometry. The electrocatalytic activity of the two modified electrodes was tested for the reduction of the molecular oxygen.     

Effect of amino,hydroxyl, and carboxyl terminal groups of alkyl chains of self-assembled monolayers on the adsorption pattern of gold nanoparticles

The adsorption pattern of gold nanoparticles (AuNPs) on functionalized self-assembled monolayers (SAMs) produced on a Au(111) surface was characterized. The Au(111) was modified with 11-amino-1-undecanethiol hydrochloride (AUT), 11-mercapto-1-undecanol (MUT), or 11-mercaptoundecanoic acid (MUA) at an elevated temperature and pressure. The AuNPs aggregated on the AUT-SAM surface, whereas they were well dispersed on the MUT-SAM surface and localized on the MUA-SAM surface. The results suggest that interactions between AuNPs differ according to the degree of peeling of citrate-layer-capped AuNPs. The degree of peeling, which is related to both the surface randomness of the SAMs and the functional characteristics of the terminal group of each SAM, was discussed on the basis of scanning tunneling microscopy observations, X-ray photoelectron spectroscopic analyses, and contact angle measurements. Our study shows that AuNP patterns can be controlled by changing the terminal group of the alkyl thiol SAM on a Au(111) surface.     

Electrochemical Sensing Platforms for HER2‐ECD Breast Cancer Biomarker Detection

Screening and early diagnosis are crucial to increase the success of cancer patients’ treatments and improve the survival rate. To contribute to this success, distinct electrochemical immunosensing platforms were developed for the analysis of the ExtraCellular Domain of the Human Epidermal growth factor Receptor 2 (HER2‐ECD) through sandwich assays on nanomaterial‐modified screen‐printed carbon electrodes (SPCEs). The most promising platforms showed to be SPCEs modified with (i) gold nanoparticles (AuNPs) and (ii) multiwalled carbon nanotubes combined with AuNPs. The antibody‐antigen interaction was detected using a secondary antibody labelled with alkaline phosphatase and 3‐indoxyl phosphate and silver ions as the enzymatic substrate. The electrochemical signal of the enzymatically generated metallic silver was recorded by linear sweep voltammetry. Under the optimized conditions, linear calibration plots were obtained between 7.5 and 50 ng/mL and the total assay time was 2 h 20 min, achieving LODs of 0.16 ng/mL (SPCE‐MWCNT/AuNP) and 8.5 ng/mL (SPCE‐AuNP), which are well below the established cut‐off value of 15 ng/mL for this cancer biomarker.     

Direct electrochemistry of recombinant tobacco peroxidase on gold

Direct electron transfer (DET) reactions of recombinant tobacco peroxidase (rTOP), namely direct electroreduction of Compound I/Compound II and heme Fe^3+/2+ conversion, were studied on gold electrodes. rTOP of wild type, non-glycosylated, was produced using an Escherichia coli expression system. At pH 5.0, the redox potential for direct electrochemical transformation of the Fe^3+/2+ of the peroxidase heme was −143 mV vs. AgAgCl, and 0.26 ± 0.07 pmol of the adsorbed rTOP were in DET contact with the gold electrode. The total amount of the adsorbed rTOP estimated from QCM data was 53 ± 5 pmol/cm² or 1.67 pmol when referred to the surface area of the electrodes used for electrochemical measurements. Of 1.67 pmol of adsorbed rTOP, only 0.76 pmol were catalytically active. DET between Au and the enzyme was also studied in the reaction of the bioelectrocatalytic reduction of H₂O₂ by cyclic voltammetry and amperometric detection of H₂O₂ at +50 mV with rTOP-modified Au electrodes placed in a wall-jet flow-through electrochemical cell. Maximal bioelectrocatalytic current response of the rTOP-modified gold electrodes to H₂O₂ was observed at pH 5.0 and stemmed from its bioelectrocatalytic reduction based on DET between Au and the active site of rTOP. Kinetic analysis of the DET reactions gave 52% of the adsorbed rTOP molecules active in DET reactions (0.4 pmol of adsorbed catalytically active rTOP, correspondingly), which correlated well with the non-catalytic-voltammetry data. DET was characterised by a heterogeneous ET rate constant of 13.2 s⁻¹, if one takes into account the QCM data, and 19.6 s⁻¹, if the amount of rTOP estimated from the data on DET transformation of Fe^3+/2+ couple of rTOP is considered. The sensitivity for H₂O₂ obtained for the rTOP-modified Au electrodes was 0.7 ± 0.1 A M⁻¹ cm⁻². These are the first ever-reported data on DET reactions of anionic plant peroxidases on bare gold electrodes.     

An ultrasensitive hydrogen peroxide biosensor based on electrocatalytic synergy of graphene–gold nanocomposite, CdTe–CdS core–shell quantum dots and gold nanoparticles

We first reported an ultrasensitive hydrogen peroxide biosensor in this work. The biosensor was fabricated by coating graphene–gold nanocomposite (G–AuNP), CdTe–CdS core–shell quantum dots (CdTe–CdS), gold nanoparticles (AuNPs) and horseradish peroxidase (HRP) in sequence on the surface of gold electrode (GE). Cyclic voltammetry and differential pulse voltammetry were used to investigate electrochemical performances of the biosensor. Since promising electrocatalytic synergy of G–AuNP, CdTe–CdS and AuNPs towards hydrogen peroxide was achieved, the biosensor displayed a high sensitivity, low detection limit (S/N = 3) (3.2 × 10⁻¹¹ M), wide calibration range (from 1 × 10⁻¹⁰ M to 1.2 × 10⁻⁸ M) and good long-term stability (20 weeks). Moreover, the effects of omitting G–AuNP, CdTe–CdS and AuNP were also examined. It was found that sensitivity of the biosensor is more 11-fold better if G–AuNP, CdTe–CdS and AuNPs are used. This could be ascribed to improvement of the conductivity between graphene nanosheets in the G–AuNP due to introduction of the AuNPs, ultrafast charge transfer from CdTe–CdS to the graphene sheets and AuNP due to unique electrochemical properties of the CdTe–CdS, and good biocompatibility of the AuNPs for horseradish peroxidase. The biosensor is of best sensitivity in all hydrogen peroxide biosensors based on graphene and its composites up to now.     

Fabrication and electrochemical application of three-dimensional gold nanoparticles: self-assembly

Multilayers film of nanostructured citrate-stabilized gold particles (AuNPs) has been fabricated based on the layer-by-layer (LBL) technique using a self-assembled monolayer of 1,4-benzenedimethanethiol (BDMT). The formation of AuNPs and BDMT self-assemblies as alternative multilayers was confirmed by transmission electron microscopy (TEM), X-ray photoelectron spectroscope (XPS), and quartz crystal microbalance (QCM). The formation of uniform AuNP layers with an average monolayer thickness of 5-6 nm was obvious in the TEM images. The existence of BDMT molecules as cross linkers for the AuNPs' layers was proved by XPS measurements. The greater affinity of AuNPs' layers to bind BDMT molecules in comparison with the bare Au bulk electrode was revealed by QCM measurements. Electrochemically, the AuNPs' layers on the electrode surface did not only catalyze the reduction of oxygen (ca. 100-mV positive shift of the reduction peak potential compared with that at the bare Au bulk electrode) but also showed a fascinating nature of working as a renewed activated-electrode surface; a zigzag response was observed for oxygen reduction during alternative immobilization of BDMT and the AuNP layer. The self-assembly of a new AuNPs layer restored the catalytic activity that was entirely blocked by the preceding BDMT layer.     

Toward reliable gold nanoparticle patterning on self-assembled DNA nanoscaffold

Assembly of gold nanoparticles (AuNP) into designer architectures with reliablity is important for nanophotonics and nanoelectronics applications. Toward this goal we present a new strategy to prepare AuNPs monofunctionalized with lipoic acid modified DNA oligos. This strategy offers increased bonding strength between DNA oligos and AuNP surface. These conjugates are further selectively mixed with other DNA strands and assembled into fixed sized DNA nanostructures carring a discrete number of AuNPs at desired positions. Atomic force microscopy imaging reveals a dramatically improved yield of the AuNPs on DNA tile structure compared to the ensembles using monothiolate AuNP-DNA conjugates.     

Localized Deposition of Au Nanoparticles by Direct Electron Transfer through Cellobiose Dehydrogenase

Cellobiose dehydrogenase (CDH) is a fascinating extracellular fungal enzyme that consists of two domains, one carrying a flavin adenine dinucleotide (FAD) and the other a cytochrome‐type heme b group as cofactors. The two domains are interconnected by a linker and electrons can shuttle from the FAD to the heme group by intramolecular electron transfer. Electron transfer between CDH and an electrode can occur by direct electron transfer (DET) and by mediated electron transfer (MET). This characteristic makes CDH an interesting candidate for integration in systems such as biosensors and biofuel cells. Moreover, it makes CDH an alternative for the reduction of metal ions through DET and MET. In this work we have explored the localized deposition of gold on Pd substrates by CDH through DET and MET. For this purpose we exploited the advantage of scanning electrochemical microscopy (SECM) as a patterning tool. We first demonstrated that gold nanoparticles can be formed in homogenous solution. Then we showed that Au nanoparticles can also be locally formed and deposited on surfaces through DET at low pH and by MET at neutral pH using benzoquinone/hydroquinone as mediator.     

Determination of melamine in food contact materials using an electrode modified with gold nanoparticles and reduced graphene oxide

We describe an electrochemical sensor for melamine based on a glassy carbon electrode (GCE) modified with reduced graphene oxide that was decorated with gold nanoparticles (AuNP/rGO). The AuNPs/rGO nanocomposite was synthesized by co-reduction of Au(III) and graphene oxide and characterized by transmission electron microscopy, Raman spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The response of the modified GCE to melamine was investigated by using hexacyanoferrate as an electrochemical reporter. It is found that the electrochemical response to hexacyanoferrate is increasingly suppressed by increasing concentration of melamine. This is attributed to competitive adsorption of melamine at the AuNP/rGO composite through the interaction between the amino groups of melamine and the AuNPs. The presence of rGO, in turn, provides a platform for a more uniform distribution of the AuNPs and enhances the electron transfer rate of the redox reaction. The findings were used to develop a sensitive method for the determination of melamine. Under optimized conditions, the redox peak current of hexacyanoferrate at a working voltage of 171 mV (vs. SCE) is linearly related to the concentration of melamine in 5.0 to 50 nM range. The method was successfully applied to the determination of melamine in food contact materials.

A simple electrochemical sensor based on gold nanoparticles decorated reduced graphene oxide was developed for highly sensitive measurement of melamine in food contact materials.

     

Synthesis, characterization, and electrochemiluminescence of luminol-reduced gold nanoparticles and their application in a hydrogen peroxide sensor

It was found that chloroauric acid (HAuCl(4)) could be directly reduced by the luminescent reagent luminol in aqueous solution to form gold nanoparticles (AuNPs), the size of which depended on the amount of luminol. The morphology and surface state of as-prepared AuNPs were characterized by transmission electron microscopy, UV/visible spectroscopy, X-ray photoelectron spectroscopy, FTIR spectroscopy, and thermogravimetric analysis. All results indicated that residual luminol and its oxidation product 3-aminophthalate coexisted on the surface of AuNPs through the weak covalent interaction between gold and nitrogen atoms in their amino groups. Subsequently, a luminol-capped AuNP-modified electrode was fabricated by the immobilization of AuNPs on a gold electrode by virtue of cysteine molecules and then immersion in a luminol solution. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. The as-prepared modified electrode exhibited an electrochemiluminescence (ECL) response in alkaline aqueous solution under a double-step potential. H2O2 was found to enhance the ECL. On this basis, an ECL sensor for the detection of H2O2 was developed. The method is simple, fast, and reagent free. It is applicable to the determination of H2O2 in the range of 3x10(-7)-1x10(-3) mol L(-1) with a detection limit of 1x10(-7) mol L(-1) (S/N=3).     

Light-activated covalent formation of gold nanoparticle-graphene and gold nanoparticle-glass composites

Monolayer protected gold nanoparticles (AuNPs) modified with a 3-aryl-3-(trifluoromethyl)diazirine functionality at its terminus (Diaz-AuNPs, 3.9 nm) were prepared and irradiated in the presence of two very different substrates, reduced graphene and glass. Upon irradiation, the terminal diazirine group loses nitrogen to generate a reactive carbene at the interface of the AuNPs that can then undergo addition or insertion reactions with functional groups on the graphene or glass surfaces, leading to the formation of graphene-AuNP and glass-AuNP hybrids, respectively. The AuNP hybrids were characterized using TEM, XRD, XPS, AFM, and UV-vis spectroscopy. Control experiments done in the absence of irradiation demonstrate that carbene activation is required for incorporation of significant AuNP onto the materials. The AuNP hybrids are robust and stable to excessive washing and centrifugation supporting the covalent nature of the interaction between the AuNP and the graphene or silicate glass substrates. Because the formation of the composite is light activated, it lends itself to photopatterning; this application is demonstrated for making the glass-AuNP composites.