Connect the drops: using solids as adhesives for liquids

Colloidal particles are shown to be capable of developing adhesion between liquid phases through a bridging mechanism by which intervening, micrometer-scaled, fluid films are stabilized. Particle dynamics leading to the assembly of the stabilizing structure are discussed. Models for the resulting adhesive force are developed from considerations of both interface shape perturbation and the force applied by surface tension on an individual particle. Finally, predictions from these models are compared to direct measurements of the forces that arise during the separation of adhering interfaces. Such comparisons lead to a novel method for determining the three-phase contact angle inherent to particles residing at fluid interfaces.     

Direct measurement of the binding force between microfabricated particles and a planar surface in aqueous solution by force-sensing piezoresistive cantilevers

We propose a force measurement method for evaluating the binding force between microscale flat surfaces in an aqueous solution. Using force-sensing piezoresistive cantilevers with sub-nanonewton force resolution, we have directly measured binding forces between SiO2-SiO2 microcontacts, which were created by gravity-driven random collision between microfabricated SiO2 cylindrical particles and a planar SiO2 substrate in a HCl solution. First, to examine our method we measured the pH dependence of the binding force. The binding forces were 12 and 5.8 nN at pH 1.0 and 2.0, respectively. As the pH increased, the binding force decreased and became zero at pH greater than 3.0. We confirmed that the bindings were based on the van der Waals' (VDW) force at pH 2.0 or less whereas a repulsive double-layer force acted between the surfaces at pH 3.0 or more. Second, the binding forces were categorized into a friction force or an adhesion force between the particles and the substrate. In the measurement, the friction force between the particle and the substrate was measured in the case when the particle slid on the substrate. On the contrary, the adhesion force was measured when the particle came off the substrate. Whether the particle slid or came off depended on the aspect ratio of the particle. We fabricated cylindrical particles with an aspect ratio of 0.03-2.0 and distinguished the friction force from the adhesion force by changing the aspect ratio of the particles. As a result, the friction force per unit contact area between SiO2-SiO2 flat surfaces was found to be 330 pN/microm2 +/- 20% when we used particles with a low aspect ratio (<0.1), and the adhesion force per unit contact area was 90 pN/microm2 +/- 20% for particles with a high aspect ratio (>0.4). For fluidic self-assembly that utilizes microscale surface contact in a liquid, our measurement method is an effective tool for studying and developing systems.     

Colloidal interactions between Langmuir-Blodgett bitumen films and fine solid particles

In oil sand processing, accumulation of surface-active compounds at various interfaces imposes a significant impact on bitumen recovery and bitumen froth cleaning (i.e., froth treatment) by altering the interfacial properties and colloidal interactions among various oil sand components. In the present study, bitumen films were prepared at toluene/water interfaces using a Langmuir-Blodgett (LB) upstroke deposition technique. The surface of the prepared LB bitumen films was found to be hydrophobic, comprised of wormlike aggregates containing a relatively high content of oxygen, sulfur, and nitrogen, indicating an accumulation of surface-active compounds in the films. Using an atomic force microscope, colloidal interactions between the LB bitumen films and fine solids (model silica particles and clay particles chosen directly from an oil sand tailing stream) were measured in industrial plant process water and compared with those measured in simple electrolyte solutions of controlled pH and divalent cation concentrations. The results show a stronger long-range repulsive force and weaker adhesion force in solutions of higher pH and lower divalent cation concentration. In plant process water, a moderate long-range repulsive force and weak adhesion were measured despite its high electrolyte content. These findings provide more insight into the mechanisms of bitumen extraction and froth treatment.     

Micromechanical adhesion force measurements between tetrahydrofuran hydrate particles

Adhesion forces between tetrahydrofuran (THF) hydrate particles in n-decane were measured using an improved micromechanical technique. The experiments were performed at atmospheric pressure over the temperature range 261-275 K. The observed forces and trends were explained by a capillary bridge between the particles. The adhesion force of hydrates was directly proportional to the contact force and contact time. A scoping study examined the effects of temperature, anti-agglomerants, and interfacial energy on the particle adhesion forces. The adhesion force of hydrates was found to be directly proportional to interfacial energy of the surrounding liquid, and to increase with temperature. Both sorbitan monolaurate (Span20) and poly-N-vinyl caprolactam (PVCap) decreased the adhesion force between the hydrate particles.     

Tilt of atomic force microscope cantilevers: effect on spring constant and adhesion measurements

In atomic force microscopy, the cantilevers are mounted under a certain tilt angle alpha with respect to the sample surface. In this paper, we show that this increases the effective spring constant by typically 10-20%. The effective spring constant of a rectangular cantilever of length L can be obtained by dividing the measured spring constant by cos2 alpha(1 - 2D tan alpha/L). Here, alpha is the tilt angle and D is the size of the tip. In colloidal probe experiments, D has to be replaced by the radius of the attached particle. To determine the effect of tilt experimentally, the adhesion force between spherical borosilicate particles and planar silicon oxide surfaces was measured at tilt angles between 0 degrees and 35 degrees. The experiments revealed a significant decrease of the mean apparent adhesion force with a tilt of typically 20-30% at alpha = 20 degrees. In addition, they demonstrate that the adhesion depends drastically on the precise position of contact on the particle surface.     

Detachment force of particles from air-liquid interfaces of films and bubbles

The detachment force required to pull a microparticle from an air-liquid interface is measured using atomic force microscopy (AFM) and the colloidal probe technique. Water, solutions of sodium dodecyl sulfate (SDS), and silicone oils are tested in order to study the effects of surface tension and viscosity. Two different liquid geometries are considered: the air-liquid interface of a bubble and a liquid film on a solid substrate. It was shown that detaching particles from liquid films is fundamentally different than from bubbles or drops due to the restricted flow of the liquid phase. Additional force is required to detach a particle from a film, and the maximum force during detachment is not necessarily at the position where the particle breaks away from the interface (as seen in bubble or drop systems). This is due to the dynamics of meniscus formation and viscous effects, which must be considered if the liquid is constrained in a film. The magnitude of these effects is related to the liquid viscosity, film thickness, and detachment speed.     

Synthesis of nano/microstructures at fluid interfaces

The generation of novel multifunctional materials with hierarchical ordering is a major focus of current materials science and engineering. For such endeavors, fluid interfaces, such as air-liquid and liquid-liquid interfaces, offer ideal platforms where nanoparticles or colloidal particles can accumulate and self-assemble. Different assembly processes and reactions have been performed at fluid interfaces to generate hierarchical structures, including two-dimensional crystalline films, colloidosomes, raspberry-like core-shell structures, and Janus particles, which lead to broad applications in drug delivery and controlled release, nanoelectronics, sensors, food supplements, and cosmetics.     

A modeling approach to describe the adhesion of rough, asymmetric particles to surfaces

A combined theoretical and experimental study of the adhesion of alumina particles and polystyrene latex spheres to silicon dioxide surfaces was performed. A boundary element technique was used to model electrostatic interactions between micron-scale particles and planar surfaces when the particles and surfaces were in contact. This method allows quantitative evaluation of the effects of particle geometry and surface roughness on the electrostatic interaction. The electrostatic interactions are combined with a previously developed model for van der Waals forces in particle adhesion. The combined model accounts for the effects of particle and substrate geometry, surface roughness and asperity deformation on the adhesion force. Predictions from the combined model are compared with experimental measurements made with an atomic force microscope. Measurements are made in aqueous solutions of varying ionic strength and solution pH. While van der Waals forces are generally dominant when particles are in contact with surfaces, results obtained here indicate that electrostatic interactions contribute to the overall adhesion force in certain cases. Specifically, alumina particles with complex geometries were found to adhere to surfaces due to both electrostatic and van der Waals interactions, while polystyrene latex spheres were not affected by electrostatic forces when in contact with various surfaces.     

Stabilization of oil-in-water emulsions by colloidal particles modified with short amphiphiles

Emulsions stabilized through the adsorption of colloidal particles at the liquid-liquid interface have long been used and investigated in a number of different applications. The interfacial adsorption of particles can be induced by adjusting the particle wetting behavior in the liquid media. Here, we report a new approach to prepare stable oil-in-water emulsions by tailoring the wetting behavior of colloidal particles in water using short amphiphilic molecules. We illustrate the method using hydrophilic metal oxide particles initially dispersed in the aqueous phase. The wettability of such particles in water is reduced by an in situ surface hydrophobization that induces particle adsorption at oil-water interfaces. We evaluate the conditions required for particle adsorption at the liquid-liquid interface and discuss the effect of the emulsion initial composition on the final microstructure of oil-water mixtures containing high concentrations of alumina particles modified with short carboxylic acids. This new approach for emulsion preparation can be easily applied to a variety of other metal oxide particles.     

Pull-off force measurements between rough surfaces by atomic force microscopy

Direct measurements of the pull-off (adhesion) forces between pharmaceutical particles (beclomethasone dipropionate, a peptide-type material, and lactose) with irregular geometry and rough polymeric surfaces (series of polypropylene coatings, polycarbonate, and acrylonitrile-butadiene-styrene) were carried out using the atomic force microscope. These measurements showed that roughness of the interacting surfaces is the significant factor affecting experimentally measured pull-off forces. A broad distribution of pull-off force values was noted in the measurements, caused by a varying adhesive contact area for a particle located on rough substrate. The possibility of multiple points of contact between irregularly shaped pharmaceutical particles and substrate surfaces is demonstrated with nanoindentations of the particle in a fluoro-polymer film. Force-distance curves showing the "sawtooth" pattern are additional evidence that particles make contact with substrates at more than one point. Reduced adhesion of 10- to 14-microm-diameter lactose and peptide material particles to the polypropylene coatings with a roughness of 194 nm was found in this study. Similar pull-off force versus roughness relationships are also reported for the model spherical particles, silanized glass particle with a size of 10 microm and polystyrene particle with a diameter of 9 microm, in contact with polypropylene coatings of varying roughness characteristics. It was found that the model recently proposed by Rabinovich et al. (J. Colloid Interface Sci. 232, 1-16 (2000)) closely predicts the pull-off forces for glass and lactose particles. On the other hand, the adhesion of the peptide material and polystyrene particle to polypropylene is underestimated by about an order of magnitude with the theoretical model, in which the interacting substrates are treated as rigid materials. The underestimate is attributed to the deformation of the peptide material and polystyrene particles.     

Analytical Dispersion Force Calculations for Nontraditional Geometries

Presented in this paper are first-principle-based approximate macroscopic models of the van der Waals adhesion force for a variety of particle shapes interacting with an infinite cylinder. In particular, expressions for the van der Waals adhesion force and interaction energy are developed for a (1) spherical particle/infinite cylinder, (2) disk-like particle/infinite cylinder, (3) disk-like particle oriented edgewise to an infinite cylinder, and (4) a deformed slice/infinite cylinder. The models presented depict expected trends in the behavior of both the force of adhesion and the interaction energy between different geometric configurations. These results are also used to demonstrate the impact of contact time on the adhesion force for cylindrical fibers in contact with a disk-shaped particle. After long time intervals where the disk-like particles have remained in contact with the cylinder, the adhesion force may lead to significant deformation of the attached particle. Hence, the adhesion force for a fourth geometric set which represents the most likely scenario for attached particles with long contact times is developed. As will be shown, this scenario results in the highest values of adhesion force and interaction energy. Copyright 2000 Academic Press.     

Techniques for measuring surface forces

The forces acting between colloidal particles and between surfaces are of utmost importance for determining the behaviour of dispersed systems and adhesion phenomena. Several techniques are now available for direct measurement of these surface forces. In this review we focus on some of these methods. Two techniques for measuring forces between macroscopic solid surfaces; the interferometric surface force apparatus, known as the SFA, and a novel instrument which is based on a bimorph force sensor, the so-called MASIF, are described in some detail. Forces between a macroscopic surface and a particle can be measured with the atomic force microscope (AFM) using a colloidal probe, or by employing total internal reflection microscipy (TIRM) to monitor the position of a colloidal particle trapped by a laser beam. We also describe two different techniques that can be used for measuring forces between “soft” interfaces, the thin film balance (TFB) for single foam, emulsion and solid/fluid/fluid films, and osmotic stress methods, commonly used for studying interactions in liquid crystalline surfactant phases or in concentrated dispersions. The advantages and limitations of each of these techniques are discussed and typical results are presented.     

Colloidal Interaction at the Air-Liquid Interface

In this paper, we propose a model to analyze the stability of colloidal particles at the air-liquid interface. The proposed model for the colloidal particle interaction considers DLVO interactions and capillary, hydrophobic, and dipolar interactions between the particles. Typical values from the literature were assigned to most parameters included in the model. Numerical computation revealed the most important parameter in determining the total interaction is the density of dipoles at the external surface of the particles. We have found significant differences for the pair potential between hydrophobic and hydrophilic particles. Hydrophobic particles must aggregate in a principal minimum of the interaction potential curve while hydrophilic particles aggregate in a secondary minimum. Copyright 2000 Academic Press.     

Active colloidal particles at fluid-fluid interfaces

This review explores the intersection between two important fields of colloid and interface science – that of active colloidal particles and of (passive) particles at fluid-fluid interfaces. The former uses energy input at the particle level to propel particle motions and direct dynamic assemblies. The latter relies on the spontaneous adsorption of particles at fluid interfaces to modify the interfacial energy, rheology, and permeability of biphasic materials. Here, we address two key questions that connect these otherwise distinct fields of study. How do liquid interfaces influence the dynamics of active or driven colloidal particles? How can particle activity influence the dynamics of liquid interfaces? These questions motivate the pursuit of active particle surfactants that move and organize at fluid interfaces to perform useful functions such as enhancing mass transport or modulating interfacial properties. Drawing examples from the literature, we discuss how fluid interfaces can provide a unique environment for the study of active colloids, how surface tension can be harnessed to propel particle motions, and how capillary interactions can be activated to achieve dynamically tunable emulsions and foams. We highlight opportunities for the future study and application of active particles at liquid interfaces.     

Adhesion of spherical polyelectrolyte brushes on mica: an in situ AFM investigation

We demonstrate that the adsorption of cationic spherical polyelectrolyte brushes (SPB) on negatively charged mica substrates can be controlled in situ by the ionic strength of the suspension. The SPB used in our experiments consist of colloidal core particles made of polystyrene. Long cationic polyelectrolyte chains are grafted onto these cores that have diameters in the range of 100 nm. These particles are suspended in aqueous solution with a fixed ionic strength. Atomic force microscopy (AFM) in suspension as well as in air was used for surface characterization. In pure water the polymer particles exhibit a strong adhesion to the mica surface. AFM investigations of the dry samples show that the particles occupy the identical positions as they did in liquid. They were not removed by the capillary forces within the receding water front during the drying process. The strong interaction between the particles and the mica surface is corroborated by testing the adhesion of individual particles on the dried surface by means of the AFM tip: after a stepwise increase of the force applied to the surface by the AFM tip, the polymer particles still were not removed from the surface, but they were cut through and remained on the substrate. Moreover, in situ AFM measurements showed that particles which adsorb under liquid in a stable manner are easily desorbed from the surface after electrolyte is added to the suspension. This finding is explained by a decreasing attractive particle-substrate interaction, and the removal of the particles from the surface is due to the significant reduction of the activation barrier of the particle desorption. All findings can be explained in terms of the counterion release force.     

Particle bridging between oil and water interfaces

Particle bridging between a water drop and a flat oil-water interface has been observed when the drop is brought into contact with the interface, leading to the formation of a dense particle monolayer of disc shape (namely, particle disc) that prevents the drop from coalescing into the bulk water phase. Unlike previous observations where particles from opposite interfaces appear to register with each other before bridging, the present experiment demonstrates that the particle registry is not a necessity for bridging. In many cases, the particles from one of the interfaces were repelled away from the contact region, leaving behind the particles from the other interface to bridge the two interfaces. This is confirmed by particle bridging experiments between two interfaces covered with different sized particles, and between a particle-covered interface and a clean interface. The dynamics associated with the growth of the particle disc due to particle bridging follows a power law relationship between the radius of the disc and time: r proportional, variant t0.32+/-0.03. A scaling analysis assuming capillary attraction as the driving force and a hydrodynamic resistance leads to the power law r proportional, variant t1/3, in good agreement with the experiment. In addition, we found that binary mixtures of two different sized particles can undergo phase segregation driven by the particle bridging process.     

Chemical force microscopy study of adhesive properties of polypropylene films: influence of surface polarity and medium

The adhesive properties of untreated and corona treated polypropylene (PP) films were studied in polar (water) and nonpolar (hexadecane) liquid medium by using chemical force microscopy. A gold-coated colloidal probe was sequentially modified with self-assembled monolayers (SAMs) of omega-functionalized alkanethiols. The same colloidal probe was used for the force measurements, to avoid influence of determination accuracy of the spring constant and sphere radius on the obtained results. The thermodynamic work of adhesion was determined from the measured pull-off force using the Johnson-Kendall-Roberts (JKR) adhesion theory. Rabinovich's model was applied for the consideration of an effect of roughness when calculating the work of adhesion. It was found that the work of adhesion correlates with the hydrophilic properties of the PP surface and SAMs as well as with the polarity of the liquid medium. The observed correlations agree well with those found for the work of adhesion calculated from contact angle measurement.     

Targeted particulate adhesion to cellulose surfaces mediated by bifunctional fusion proteins

The adhesion of particles to surfaces is an integral element in many commercial and biological applications. In this article, we report on the direct measurements of protein-mediated deposition and binding of particles to model cellulose surfaces. This system involves a family of heterobifunctional fusion proteins that bind specifically to both a red dye and cellulose. Amine-coated particles were labeled with a red dye, and a fusion protein was attached to these particles at various number densities. The strength of adhesion of a single particle to a cellulose fiber was measured using micropipette manipulation as a function of the specificity of the protein and its surface density and contact time. The frequency and force of adhesion were seen to increase with contact time in fiber experiments. The dynamics of adhesion of the functionalized particles to cellulose-coated glass slides under controlled hydrodynamic flow was explored using a flow chamber for two scenarios: detachment of bound particles and attachment of particles in suspension as a function of the shear rate and surface density of protein. Highly specific adhesion was observed. The critical shear rate for particle detachment was an increasing function of cellulose binding domain (CBD) density on particle surface. A rapid irreversible attachment of particles to cellulose was observed under flow. Using a family of proteins that were divalent for binding either the red dye or cellulose, we found that particle detachment occurred because of the failure of the cellulose-CBD bond. A comparison of fiber binding and particle detachment results suggests that forces of adhesion of particles to cellulose of up to 2 nN can be obtained with this molecular system through multiple interactions. This study, along with the adhesion simulations currently under development, forms the basis of particulate design for specific adhesion applications.