Synthesis and structure of colloids and films from Pd–Ag in organic solvents

Pd/Ag bimetallic particles are dispersed in acetone, 2-propanol and 2-methoxyethanol. The colloids are prepared by codeposition of the vapors of metals and solvents at 77 K. The stabilities of the Pd/Ag colloids are in the order acetone>2-methoxyethanol~2-propanol. The particles are studied by transmission electron microscopy to determine their size and also by electron diffraction to study their crystal structure. The Pd/Ag samples exhibit more than one metallic phase in the different solvents, these being Pd, Ag and Pd/Ag. The crystallinity is controlled by the Pd/Ag ratio; the crystalline phases in the bimetallic particles can be observed using the dark field technique. The differential scanning calorimetry of Pd/Ag-2-methoxyethanol solids shows three exothermic peaks in which phase transformation, microcrystal growth and solvent decomposition of the solvent in the solid are observed. However, the differential scanning calorimetry of Pd/Ag-acetone solids shows two exothermic peaks.     

Formation mechanism of nanostructured Ag films from Ag2O particles using a sonoprocess

Nanostructured Ag films composed of nanoparticles and nanorods can be formed by the ultrasonication of ethanol solutions containing Ag₂O particles. The present work examined the formation process of these films from ethanol solutions by two different agitation methods, including ultrasonication and mechanical stirring. The mass-transfer process from Ag₂O particles to ethanol solvent is accelerated by the mechanical effects of ultrasound. Ag⁺ ions and intermediately reduced Ag clusters were released into the ethanol. These Ag⁺ ions and Ag clusters provide absorption bands at 210, 275 and 300 nm in UV-vis spectra. These bands were assigned to the absorption of Ag⁺, Ag ₄ ²⁺ and Ag_n (n?≈?3). The Ag_n clusters that readily grow to become Ag nanoparticles were formed due to the surface reaction of Ag₂O particles with ethanol under ultrasonication. The reactions of Ag⁺ ions in ethanol to form Ag nanomaterials (through the formation of Ag ₄ ²⁺ clusters) were also accelerated by ultrasonication.     

Synthesis and visible light photocatalytic activity of Ag spot-coated TiO2–60 wt% SrO composite powders

Nano-sized TiO₂–60 wt% SrO composite powders were synthesized from titanium isopropoxide and Sr(OH)₂·8H₂O by use of a sol–gel method. Ag spot-coated TiO₂–60 wt% SrO composite powders containing 3, 5, or 7 wt% Ag were synthesized by hydrothermal-assisted attachment, by use of Ag hydrosol in a high-pressure bomb at 250 °C and 450 psi. Nano-sized Ag particles approximately 5–25 nm in diameter adhered to the TiO₂–60 wt% SrO₂ composite powders. The photocatalytic activity of Ag spot-coated TiO₂–SrO powders in the degradation of phenol showed that all were highly active when irradiated with UV light. TiO₂–60 wt% SrO composite powder spot-coated with 5 wt% Ag was more photocatalytically active under visible light than TiO₂–SrO composite powder.     

Electronic properties of Ag nanoparticle arrays. A Kelvin probe and high resolution XPS study

The electronic properties of citrate stabilised Ag nanoparticles with sizes ranging from 4 to 35 nm were investigated by the Kelvin probe method and high resolution XPS. Two and three dimensional assemblies of the particles were prepared by electrostatic adsorption from aqueous solution onto poly-l-lysine modified surfaces. The work function of the Ag particles increased from 5.29 +/- 0.05 to 5.53 +/- 0.05 eV as the particle size decreased. These values are approximately 0.8 eV higher than for clean polycrystalline Ag surfaces. The origin of these remarkable high work functions cannot be explained in terms of either citrate induced changes in the surface dipole or image forces in the confined metallic domains. High resolution XPS spectra of the Ag 3d(5/2) core level were characterised by broad bands and a 0.4 eV shift towards lower binding energies for the smallest particles. Comparisons with reported studies on extended Ag surfaces indicate that as-grown particles exhibit partially oxidised surfaces. The behaviour of the work function further suggests that the strength of the Ag-O bonding increases with decreasing particle sizes. These findings are highly relevant to the interpretation of the catalytic properties of Ag nanoparticles.     

Photochemical Synthesis,Spectral-Optical and Electrophysical Properties of Composite Nanoparticles of ZnO/Ag

The photochemical synthesis of nanoparticles of ZnO/Ag in isopropanol solutions has been carried out. Their optical properties have been studied and the parameters of the plasma resonance of the nanoparticles of silver in the ZnO/Ag composites have been calculated. It has been established that the hypsochromic shift of the plasma band of silver observed on irradiation of the nanocomposite is a result of accumulation of excess electrons on the ZnO/Ag particles which leads to equalization of the potentials of the conductions zones of the semiconductor and the metallic components of the nanocomposite.     

Ag nanowires coated with Ag/Pd alloy sheaths and their use as substrates for reversible absorption and desorption of hydrogen

When the surfaces of Ag nanowires were coated with thin sheaths of Pd/Ag alloys, they exhibited hydrogen absorption/desorption behaviors and capacities similar to those of pure Pd powders or nanotubes. The stronger mechanical strengths of these cable-like nanostructures also allowed them to undergo more absorption/desorption cycles with no morphological changes. These nanostructures can be used as a good model system to study the interaction between hydrogen and metal alloys with relatively low concentrations of Pd (<10%) with respect to structural, thermodynamic, and kinetic features.     

Elaboration of metallic compacts with high porosity for mechanical supports of SOFC

The development of third generation Solid Oxide Fuel Cells (SOFC) with metallic mechanical supports presents several advantages over that of ceramic stacks by offering a lower cost and longer lifetime of the stacks. As a consequence, it is necessary to prepare metallic porous compacts that remain stable at the operating temperature of the SOFC (700–800 °C) under reductive atmosphere. This paper presents an innovative process to elaborate iron, nickel and cobalt porous compacts. The process is based on the thermal decomposition of metal oxalate precursors with controlled morphology into metallic powders with coralline shape. Uniaxial compaction of such powders (without binder addition to the powders) under low uniaxial pressures (rising from 20 to 100 MPa) gave rise to green compacts with high porosity and good mechanical properties. After annealing at 800 °C under H₂ atmosphere, the compacts still present interconnected porosity high enough to allow sufficient gas flow to feed a SOFC single cell in hydrogen: the porosity rises from 25 to 50% for iron compacts, from 20 to 50% for cobalt compacts, and is higher than 40% for nickel compacts. Results from physicochemical characterization (XRD, SEM, gas permeation, Hg porosimetry) corroborated the process for SOFC application.     

梨形核壳结构氧化锌/银亚微米球的制备、表征及光学性能

利用亚锡离子还原银离子生成的金属银沉积在合成的梨形氧化锌表面作为晶种,进一步生长银纳米粒子,制备了梨形的、核壳结构的、单分散的氧化锌/银亚微米球。利用X射线衍射、透射电镜、能量色散X射线谱、紫外可见吸收谱及光致发光谱对所制备样品的形貌、微观结构、组成和光学性能进行了表征。结果表明:(1)样品是由梨形亚微米氧化锌核和银纳米颗粒壳组成;(2)在氧化锌表面的银纳米粒子作为光激发产生的电子捕获剂提高了光产生的载流子的分离效率,在能量没有改变的情况下减少了紫外发射光的强度,淬灭了可见发射光。     

Enhancement of thermoelectric performance of Na<Subscript>x</Subscript>Co<Subscript>2</Subscript>O<Subscript>4</Subscript> with Ag dispersion by precipitation from Ag<Superscript>+</Superscript> aqueous solution

Thermoelectric Na_xCo₂O₄/Ag composites were synthesized by citric acid complex (CAC) method and Ag precipitation from CH₃COOAg aqueous solution on the Na_xCo₂O₄ powders. Effects of the synthesis process on microstructure and thermoelectric performance of Na_xCo₂O₄/Ag composites were investigated. When the Na_xCo₂O₄ CAC powders were dipped in CH₃COOAg aqueous solution and dried, fine Ag particles less than around 300 nm in size were precipitated on the surface of Na_xCo₂O₄ powders. After the subsequent sintering process, the flaky Ag phase, the length and thickness of which were up to 5 and 1 μm, respectively, existed along interfaces between Na_xCo₂O₄ grains. The sizes of Ag particles obtained in this study were found to be smaller than those of the conventionally prepared Na_xCo₂O₄/Ag composites. The fine dispersion of Ag grains was effective for suppressing the increase in thermal conductivity due to the addition of metallic phase, Ag, and for improving the thermoelectric performance of Na_xCo₂O₄/Ag composites, suggesting that the synthesis technique composed of the CAC method and Ag precipitation from CH₃COOAg aqueous solution is significantly important process for thermoelectric Na_xCo₂O₄/Ag composites.     

Fabrication of Cu-Ag core-shell bimetallic superfine powders by eco-friendly reagents and structures characterization

Superfine bimetallic Cu-Ag core-shell powders were synthesized by reduction of copper sulfate pentahydrate and silver nitrate with eco-friendly ascorbic acid as a reducing agent and cyclodextrins as a protective agent in an aqueous system. The influence of Ag/Cu ratio on coatings was investigated. Ag was homogeneously distributed on the surface of Cu particles at a mole ratio of Ag/Cu=1. FE-SEM showed an uniformity of Ag coatings on Cu particles. Antioxidation of Cu particles was improved by increasing Ag/Cu ratio. TEM-EDX and UV-vis spectra also revealed that Cu cores were covered by Ag nanoshells on the whole. The surface composition analysis by XPS indicated that only small parts of Cu atoms in the surface were oxidized. It was noted that the hindrance of cyclodextrins chemisorbed on particles plays an important role in forming high quality and good dispersity Cu-Ag (Cu@Ag) core-shell powders.     

Selective degradation of chemical bonds: from single-source molecular precursors to metallic Ag and semiconducting Ag2S nanocrystals via instant thermal activation

Selective formation of metallic Ag and semiconducting Ag(2)S nanocrystals has been achieved via a modified hot-injection process from a single-source precursor molecule, Ag(SCOPh), which can potentially generate both [Ag] and [AgS] fragments simultaneously. When the precursor molecules are injected into a preheated reaction system at 160 degrees C, spherical Ag(2)S nanocrystals are directly obtained even without a molecular activator, such as alkylamines. Mixtures of Ag and Ag(2)S or pure metallic Ag nanocrystals are obtained if the precursor molecules are injected at lower than 160 degrees C or room temperature. These results are attributed to the direct transfer of thermal energies to precursor molecules, which are enough to dissociate S-C as well as Ag-S bonds simultaneously. Detailed characterizations about the produced nanocrystals have been performed using powder X-ray diffraction (XRD), transmission electron microscopy (TEM), as well as energy-dispersive X-ray (EDX) spectrum.     

纳米级Ag粉的制备

报道了氧化还原法制备纳米Ａｇ粉，通过对样品的评估，得出此种方法制备的纳米级Ａｇ粉颗粒分散性好，颗粒分布均匀，范围窄，最小粒径为５ｎｍ。     

共沉淀法制备Ag/AgCl-TiO2空心复合纳米微球及其光催化性能

通过甲基丙烯酸与苯乙烯聚合制备了表面负电性的聚苯乙烯(PSt)纳米乳胶粒. 在乙醇与水的混合溶剂中, 用硅烷偶联剂乙烯基三甲氧基硅烷对其进行表面改性后加入钛酸四丁酯、 氯化钠和硝酸银, 以PSt乳胶粒为模板采用共沉淀法制备了PSt-AgCl-TiO₂复合微球. 在180 ℃对其进行液相预处理及煅烧去除PSt模板后制备了Ag/AgCl-TiO₂空心复合粒子. 对各阶段产物的形貌、 晶体结构和比表面积等进行了表征. 结果表明, 所得产物为Ag/AgCl与锐钛矿型TiO₂复合的空心粒子, 其比表面远大于商品TiO₂(P25). 考察了Ag/AgCl-TiO₂复合粒子在紫外光与可见光下对罗丹明B(RhB)降解的催化活性. 结果表明, 在紫外光下n(Ag)/n(Ti)=0.1%的Ag/AgCl-TiO₂复合粒子活性最高, 30 min时对RhB的降解率比不含Ag/AgCl的TiO₂空心微球提高了13%; 虽然Ag/AgCl-TiO₂在可见光下的催化活性远比紫外光下低, 但与纯TiO₂空心纳米微球相比其催化活性仍明显增强. n(Ag)/n(Ti)=2.0%的Ag/AgCl-TiO₂复合粒子催化活性最高, 120 min时对RhB的降解率比不含Ag/AgCl的TiO₂空心微球提高了38%.     

Ag/ZnO heterostructure nanocrystals: synthesis, characterization, and photocatalysis

A high yield of the dimer-type heterostructure of Ag/ZnO nanocrystals with different Ag contents is successfully prepared through a simple solvothermal method in the absence of surfactants. The samples are characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis spectroscopy, and IR spectroscopy. The results show that all samples are composed of metallic Ag and ZnO; Ag nanoparticles locate on the surface of ZnO nanorods; the binding energy of Ag 3d(5/2) for the Ag/ZnO sample with a Ag content of 5.0 atom % shifts remarkably to the lower binding energy compared with the corresponding value of pure metallic Ag because of the interaction between Ag and ZnO nanocrystals; the concentration of oxygen vacancy for the as-synthesized samples varies with the increasing Ag content, and the Ag/ZnO sample with a Ag content of 5.0 atom % has the largest density of oxygen vacancy. In addition, the relationship between their structure and photocatalytic property is investigated in detail. It is found that the photocatalytic property is closely related to its structure, such as heterostructure, oxygen defect, and crystallinity. The presence of metallic Ag nanoparticles and oxygen vacancy on the surface of ZnO nanorods promotes the separation of photogenerated electron-hole pairs and thus enhances the photocatalytic activity.     

A variable Ag-Cr-Oxalate channel lattice: [M(x)Ag(0.5)(-)(x)(H(2)O)(3)]@[Ag(2.5)Cr(C(2)O(4))(3)], M = K, Cs, Ag

Reaction of aqueous AgNO(3) with aqueous M(3)[Cr(ox)(3)] in >or=3:1 molar ratio causes the rapid growth of large, cherry-black, light-stable crystals which are not Ag(3)[Cr(ox)(3)], but [M(0.5)(H(2)O)(3)]@[Ag(2.5)Cr(ox)(3)] (ox(2)(-) = oxalate, C(2)O(4)(2)(-); M = Na, K, Cs, Ag, or mixtures of Ag and a group 1 element). The structure of these crystals contains an invariant channeled framework, with composition [[Ag(2.5)Cr(ox)(3)](-)(0.5)]( infinity ), constructed with [Cr(ox)(3)] coordination units linked by Ag atoms through centrosymmetric [Cr-O(2)C(2)O(2)-Ag](2) double bridges. The framework composition [Ag(2.5)Cr(ox)(3)](-)(0.5) occurs because one Ag is located on a 2-fold axis. Within the channels there is a well-defined and ordered set of six water molecules, strongly hydrogen bonded to each other and some of the oxalate O atoms. This invariant channel plus water structure accommodates group 1 cations, and/or Ag cations, in different locations and in variable proportions, but always coordinated by channel water and some oxalate O atoms. The general formulation of these crystals is therefore [M(x)Ag(0.5-x)(H(2)O)(3)]@[Ag(2.5)Cr(ox)(3)]. Five different crystals with this structure are reported, with compositions 1 Ag(0.5)[Ag(2.5)Cr(ox)(3)](H(2)O)(3), 2 Cs(0.19)Ag(0.31)[Ag(2.5)Cr(ox)(3)](H(2)O)(3), 3 K(0.28)Ag(0.22)[Ag(2.5)Cr(ox)(3)](H(2)O)(3), 4 Cs(0.41)Ag(0.09)[Ag(2.5)Cr(ox)(3)](H(2)O)(3), and 5 Cs(0.43)Ag(0.07) [Ag(2.5)Cr(ox)(3)](H(2)O)(3). All crystallize in space group C2/c, with a approximately 18.4, b approximately 14.6, c approximately 12.3 A, beta approximately 113 degrees. Pure Ag(3)[Cr(ox)(3)](H(2)O)(3), which has the same crystal structure (1), was obtained from water by treating Li(3)[Cr(ox)(3)] with excess AgNO(3). Complete dehydration of all of these compounds occurs between 30 and 100 degrees C, with loss of diffraction, but rehydration by exposure to H(2)O(g) at ambient temperature leads to recovery of the original diffraction pattern. In single crystals, this reversible dehydration-hydration occurs without visually evident crystal change, but with loss of mechanical strength. We postulate a general mechanism for transport of water molecules along the channels, associated with local partial collapses of the channel framework, with concomitant bending but little breaking of the host Ag-O and Cr-O bonds, which is readily reversed.     

Ag/Mg-Al-O Composite for Low Temperature NOx Storage

Ag/Mg-Al-O composite was prepared by the calcination of Ag-containing Mg-Al hydrotalcite-like compound and metallic Ag supported on periclase phase Mg-Al-O was obtained. The as-prepared Ag/Mg-Al-O composite exhibits good NOx storage capability in a relatively low temperature range of 150―300 °C. The highest NOx storage capability of 7.3 mg/g was achieved at 150 °C, while a lower NOx storage capability of 5.1 mg/g was achieved at 300 °C. Meanwhile, ca. 25% of NOx was observed to decompose to N2 at 300 °C. In situ FTIR results suggest that NOx mainly stored in Ag/Mg-Al-O catalyst in the form of bridging nitrites located on periclase phase Mg-Al-O.     

Effect of Incorporation of Silver on the Electrical Properties of Sol-Gel-Derived Titania Film

Metallic Ag nanoparticles-incorporating titania films were prepared using the sol-gel method. X-ray diffraction (XRD) patterns, UV/Vis optical spectra and transmission electron microscopy (TEM) images were recorded to characterize the Ag/titania composite films. Electrometer was used to estimate the resistance of Ag/titania composite film to understand the effect of the incorporation of metallic Ag nanoparticles on the electrical properties of titania film. The results showed that metallic Ag nanoparticles distributed randomly in titania film and most metallic Ag particles size was in the range of 5–15 nm. The agglomeration of a small quantity of metallic Ag particles occurred and when the amount of Ag species was increased the agglomeration was enhanced. The resistance of Ag/titania composite films decreased greatly compared with pure titania film.     

阴离子吸附对Ag溶胶光学性质和表面增强拉曼散射的影响

本文研究了吸附几种不同阴离子(CO~3^2-, OH^-, I^-, Br^-, Cl^-)的Ag溶胶的吸光性质和表面增强拉曼散射(SERS)效应。研究发现, 亲核能力较强的阴离子在胶粒表面有较强的吸附, 并能有效降低胶粒表层的自由电子密度, 从而使Ag溶胶的吸收峰向长波方向移动; 溶胶中产生SERS的机理是阴离子在Ag胶粒表面上的化学吸附, SERS的强度随吸附覆盖度的增大而增大。     

Mono and bi-metallic electrocatalysts of Pt and Ag for oxygen reduction reaction synthesized by sonication

Nanoparticles of Ag, Pt and Pt–Ag were synthesized using ultrasonic irradiation with no consecutive thermal treatment to catalyze the oxygen reduction reaction. Metal nanoparticles are supported on carbon substrate. The synthesized materials were characterized by XRD, TEM, and cyclic and lineal voltammetry techniques. The kinetic formation of the metallic nanoparticles in solution was followed using UV–vis spectroscopy. The metal particles have crystalline structure and particle size with < 10 nm in size and in the form of spherical agglomerates. Ag/C exhibits lower electrochemical activity and stability for the ORR compared to Pt/C and Pt–Ag/C in acid medium. The mass and specific activity results demonstrate that the synthesized bimetallic sample exhibits 1.5 and 5 times greater electrochemical activities for the ORR compared to the commercial sample.     

Preparation and Antibacterial Effect of Bamboo Charcoal/Ag on Staphylococcus Aureus and Pseudomonas Aeruginosa

Bamboo charcoal supporting silver (BC/Ag) was prepared by activation and chemical reduction. The BC/Ag composites were characterized by silver particle size and distribution, silver ion (Ag⁺) release and antibacterial properties. Scanning and transmission electron microscopy (SEM and TEM) showed that the Ag particles were distributed uniformly on the BC matrix. The Ag particle size was found to be less than 150 nm based on TEM. The Ag⁺ release increased initially which was followed by a marginal increase between the 8th and 24th hour. Composites contained higher amounts of silver exhibited a further rise in Ag⁺ release from the 24‐hours of storage in water. The antibacterial effects of the BC/Ag composite powders against Pseudomonas aeruginosa and Staphylococcus aureus were assessed from the minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) method, and an excellent antibacterial performance was discovered.