A simple and sensitive solid-phase radioimmunoassay for the assay of human TSH antibody

A simple and sensitive radioimmunoassay procedure is described for the screening and detection of specific antibodies in hybridoma cell lines. The specific procedure was developed to screen for antibodies against human thyrotropin (hTSH), but the procedure is applicable to screening for any desired antibodies. The immunoglobulin G(IgG) fraction of goat anti-mouse IgG is used to coat wells of microtiter plates. Anti-hTSH antibodies are measured by incubating antiserum dilutions in the coated wells and detecting the bound IgG with radioiodinated hTSH. Unlabeled hTSH may also be detected by its ability to inhibit binding of 125I-hTSH to the coated wells. This assay technique meets the demands of simplicity, sensitivity, reproducibility, and rapidity as a screening assay of hybridoma cell lines capable of secreting anti h-TSH.     

Determination of immunoglobulin G in bovine colostrum and milk by direct biosensor SPR-immunoassay

An automated biosensor surface-plasmon resonance-based assay was developed for the determination of immunoglobulin G (IgG) in bovine milk and colostrum with either goat or rabbit antibovine IgG or protein G used as detecting molecule. The method is configured as a direct and nonlabeled immunoassay, with quantitation against an authentic IgG calibrant. Whole colostrum or milk is prepared for analysis by dilution into buffer. Analysis conditions, including ligand immobilization, flowrate, contact time, and regeneration, were optimized, and nonspecific binding was evaluated. Performance parameters included working range of 15-10 000 ng/mL, method detection limit of 0.08 mg/mL, overall instrument response reproducibility relative standard deviation (RSD(R)) of 0.47%, mean between-run RSD(R) of 10.5% for colostrum, and surface stability over 200 analyses. The proposed method was compared with independent alternative methods. The technique was applied to the measurement of IgG content during early lactation transition from colostrum to milk, as well as in consumer milk, colostrum, and hyperimmune milk powders.     

Tofu-inspired microcarriers from droplet microfluidics for drug delivery

Microcarriers have attracted increasing interests in drug delivery. In order to develop this technique, it is prone to focus on the generation of functional particles through using simple approaches and novel but accessible materials. Here, inspired by the formation mechanism of tofu that through the mixing of soymilk and brine for cross-linking soybean proteins, we present novel soybean protein microcarriers by using microfluidic generation approach for drug delivery. Since the soybean protein droplets are generated by microfluidic emulsification method, the tofu microparticles present highly monodisperse and homogeneous morphologies. Because of the excellent biocompatibility of the soybean protein and the interconnected porous structures throughout the whole microparticles after freeze-drying, various kinds of drugs and active molecules could be absorbed and loaded in the microcarriers, which makes them versatile for drug delivery. It can be anticipated that the microfluidic-generated tofu microcarriers will have great potential in the biomedical field.     

Antibody-biotemplated HgS nanoparticles: extremely sensitive labels for atomic fluorescence spectrometric immunoassay

In this work, antibody goat anti-human IgG as a scaffold was employed for the synthesis and biofunctionalization of HgS nanoparticles (NPs) via a facile one-pot process. After a complete sandwich-type immunoreaction among primary antibody, human IgG and secondary antibody labeled with HgS NPs, a large number of mercury ions released from captured HgS NPs dissolution were quantitatively detected by chemical vapor generation atomic fluorescence spectrometry (CVG-AFS). Taking advantage of the signal amplification property of HgS NPs and the high sensitivity of CVG-AFS, the assay detected human IgG with a limit of detection (S/N = 3) of 0.6 ng mL(-1) (4.0 fmol mL(-1) or 0.4 fmol) and the response was linear over a dynamic range from 1.0 to 5.0 × 10(4) ng mL(-1) with a correlation coefficient of 0.996. A relative standard deviation (RSD) of 1.0 × 10(2) ng mL(-1) human IgG was 1.5% for within-batch (intra-assay) and 4.5% for between-batch (inter-assay). Other proteins, such as goat anti-rabbit IgG, goat anti-human IgG, rabbit anti-human IgG, carcinoembryonic (CEA), α-fetoprotein (AFP), human serum albumin (HSA) and bovine serum albumin (BSA) did not significantly interfere with the assay for human IgG. The analytical result of HgS NPs with AFS-based immunoassay technology for the quantification of human IgG in human serum from patients is in good agreement with the result obtained by conventional immunoturbidimetric method. The consequence shows that the novel immunosensor possessed satisfactory precision, extremely high sensitivity, high selectivity and could be applied for the quantification analysis of real samples.     

Fluorescence energy transfer-based multiplexed hybridization assay using gold nanoparticles and quantum dot conjugates on photonic crystal beads

A multiplexed assay strategy was developed for the detection of nucleic acid hybridization. It is based on fluorescence resonance energy transfer (FRET) between gold nanoparticles (AuNPs) and multi-sized quantum dots (QDs) deposited on the surface of silica photonic crystal beads (SPCBs). The SPCBs were first coated with a three-layer primer film formed by the alternating adsorption of poly(allylamine hydrochloride) and poly(sodium 4-styrensulfonate). Probe DNA sequences were then covalently attached to the carboxy groups at the surface of the QD-coated SPCBs. On addition of DNA-AuNPs and hybridization, the fluorescence of the donor QDs is quenched because of the close proximity of the AuNPs. However, the addition of target DNA causes a recovery of the fluorescence of the QD-coated SPCBs, thus enabling the quantitative assay of hybridized DNA. Compared to fluorescent dyes acting as acceptors, the use of AuNPs results in much higher quenching efficiency. The multiplexed assay displays a wide linear range, high sensitivity, and very little cross-reactivity. This work, where such SPCBs are used for the first time in a FRET assay, is deemed to present a new and viable approach towards high-throughput multiplexed gene assays.

Automated sample preparation method for suspension arrays using renewable surface separations with multiplexed flow cytometry fluorescence detection

In this paper, we describe a new method of automated sample preparation for multiplexed biological analysis systems that use flow cytometry fluorescence detection. In this approach, color-encoded microspheres derivatized to capture particular biomolecules are temporarily trapped in a renewable surface separation column to enable perfusion with sample and reagents prior to delivery to the detector. This method provides for separation of the biomolecules of interest from other sample matrix components as well as from labeling solutions. After sample preparation, the beads can be released from the renewable surface column and delivered to a flow cytometer for direct on-bead analysis one bead at a time. Using mixtures of color-encoded beads derivatized for various analytes yields suspension arrays for multiplexed analysis. Development of this approach required a new technique for automated capture and release of the color-encoded microspheres within a fluidic system. We developed a method for forming a renewable filter and demonstrate its use for capturing microspheres that are too small to be easily captured in previous flow cells for renewable separation columns. The renewable filter is created by first trapping larger beads in the flow cell, and then smaller beads are captured either within or on top of the bed of larger beads. Both the selective microspheres and filter bed are automatically emplaced and discarded for each sample. A renewable filter created with 19.9 μm beads was used to trap 5.6 μm optically encoded beads with trapping efficiencies of 99%. The larger beads forming the renewable filter did not interfere with the detection of color-encoded 5.6 μm beads by the flow cytometer fluorescence detector. The use of this method was demonstrated with model reactions for a variety of bioanalytical assay types including a one-step capture of a biotinylated label on Lumavidin beads, a two-step sandwich immunoassay, and a one-step DNA binding assay. A preliminary demonstration of multiplexed detection of two analytes using color-encoded beads was also demonstrated. The renewable filter for creating separation columns containing optically encoded beads provides a general platform for coupling renewable surface methods for sample preparation and analyte labeling with flow cytometry detectors for suspension array multiplexed analyses.     

Silicon Dioxide Coating of Titanium Dioxide Nanoparticles from Dielectric Barrier Discharge in a Gaseous Mixture of Silane and Nitrogen

The coating of titanium dioxide nanoparticles with silicon dioxide has been carried out by dielectric barrier discharge (DBD) plasma treatments to enhance the thermostability of Titania for applications at high temperature processes. During the first coating processing step, a closed film of silicon nitride was produced via plasma treatment in a gaseous mixture of silane and nitrogen, while atmospheric surface contaminations got mainly removed. In the second processing step, the DBD plasma treatment in oxygen or air was used to convert the silicon nitride mainly into silicon dioxide. Remaining carbon impurities at the interfaces between titanium dioxide and silicon nitride after the nitrogen/silane plasma treatment were subsequently removed simultaneously. Atomic force microscopy and X-ray photoelectron spectroscopy were employed to study the DBD plasma treatments of the TiO₂ nanoparticles.     

Molecularly imprinted polymer film interfaced with Surface Acoustic Wave technology as a sensing platform for label-free protein detection

Molecularly imprinted polymer (MIP)-based synthetic receptors integrated with Surface Acoustic Wave (SAW) sensing platform were applied for the first time for label-free protein detection. The ultrathin polymeric films with surface imprints of immunoglobulin G (IgG-MIP) were fabricated onto the multiplexed SAW chips using an electrosynthesis approach. The films were characterized by analyzing the binding kinetics recorded by SAW system. It was revealed that the capability of IgG-MIP to specifically recognize the target protein was greatly influenced by the polymer film thickness that could be easily optimized by the amount of the electrical charge consumed during the electrodeposition. The thickness-optimized IgG-MIPs demonstrated imprinting factors towards IgG in the range of 2.8–4, while their recognition efficiencies were about 4 and 10 times lower toward the interfering proteins, IgA and HSA, respectively. Additionally, IgG-MIP preserved its capability to recognize selectively the template after up to four regeneration cycles. The presented approach of the facile integration of the protein-MIP sensing layer with SAW technology allowed observing the real-time binding events of the target protein at relevant sensitivity levels and can be potentially suitable for cost effective fabrication of a biosensor for analysis of biological samples in multiplexed manner.     

PDMS microfludic device for optical detection of protein immunoassay using gold nanoparticles

A simple but highly specific immunoassay system for goat anti-human IgG has been developed using gold nanoparticles and microfluidic techniques. The assay is based on the deposition of gold nanoparticles that are coated with protein antigens in the presence of their corresponding antibodies to microfluidic channel surface. The effects of time accumulation, the flow velocity, and the concentration of antibodies to the red light absorption percentage (RAP) of deposition were investigated with an ordinary optical microscope. By controlling the reaction time and flow velocity, a dynamic range of 3 orders of magnitude and a detection sensitivity of 10 ng ml(-1) of goat anti-human IgG were achieved. Because of its simplicity and flexibility, this new technique should be useful for fast, highthroughput screening of antibodies in clinical diagnostic applications.     

Investigation of NeutrAvidin-tagged liposomal nanovesicles as universal detection reagents for bioanalytical assays

Ligand-tagged liposomes, obtained by covalent conjugation of ligands to the liposomal surface, have been widely used as detection reagents in bioanalytical assays. A non-covalent conjugation method where IgG was attached to protein G-tagged liposomes has been recently utilized. To enlarge the application of non-covalent methods to a greater variety of ligands, including peptides, proteins, and nucleic acids, we developed and optimized a new method for the preparation of NeutrAvidin-tagged liposomes with subsequent attachment of biotinylated ligands. Two assays were used to investigate the feasibility of NeutrAvidin-tagged liposomes. The first assay was a competitive immunoassay for detecting rabbit antibodies, while the second assay was a sandwich hybridization assay for detecting a synthetic target: a DNA fragment of Erwinia amylovora. To produce the immunoliposomes for the detection of rabbit IgG, NeutrAvidin was covalently tagged to the liposomal surface at four different starting molar percentages (0.1, 0.2, 0.4, and 0.8). The biotinylated goat anti-rabbit IgG at three different molar ratios of biotin to IgG (5, 10, and 20) were then attached to the NeutrAvidin-tagged liposomes by using two different molar ratios of goat anti-rabbit IgG to NeutrAvidin (1 and 5). After the comparison of all 24 combinations, the best result was obtained with the 0.1 starting molar percentage of NeutrAvidin, 20 as the molar ratio of biotin to goat IgG, and 1 as molar ratio of IgG to NeutrAvidin. Under these optimized conditions, the limit of detection (LOD) for rabbit IgG was 38 pmol/mL. Moreover, the best combination for the sandwich hybridization assay was with the 0.1 starting molar percentage of NeutrAvidin-tagged liposomes and when the molar ratio of biotinylated reporter probe to NeutrAvidin was equal to 1. The LOD for the synthetic target DNA fragment of E. amylovora was ca. 30 pmol/mL. Both assays could be completed in about 30 min without the requirement of sophisticated equipment or techniques. Therefore, these two assays have successfully demonstrated the feasibility of NeutrAvidin-tagged liposomal nanovesicles as a universal reagent for the attachment of different types of biotinylated ligands in a fast and easy coupling process. In addition, these ligand-tagged liposomes have the potential for wide use in different types of bioanalytical assays.     

A digital microfluidic approach to heterogeneous immunoassays

A digital microfluidic (DMF) device was applied to a heterogeneous sandwich immunoassay. The digital approach to microfluidics manipulates samples and reagents in the form of discrete droplets, as opposed to the streams of fluid used in microchannels. Since droplets are manipulated on relatively generic 2-D arrays of electrodes, DMF devices are straightforward to use, and are reconfigurable for any desired combination of droplet operations. This flexibility makes them suitable for a wide range of applications, especially those requiring long, multistep protocols such as immunoassays. Here, we developed an immunoassay on a DMF device using Human IgG as a model analyte. To capture the analyte, an anti-IgG antibody was physisorbed on the hydrophobic surface of a DMF device, and DMF actuation was used for all washing and incubation steps. The bound analyte was detected using FITC-labeled anti-IgG, and fluorescence after the final wash was measured in a fluorescence plate reader. A non-ionic polymer surfactant, Pluronic F-127, was added to sample and detection antibody solutions to control non-specific binding and aid in movement via DMF. Sample and reagent volumes were reduced by nearly three orders of magnitude relative to conventional multiwell plate methods. Since droplets are in constant motion, the antibody–antigen binding kinetics is not limited by diffusion, and total analysis times were reduced to less than 2.5 h per assay. A multiplexed device comprising several DMF platforms wired in series further increased the throughput of the technique. A dynamic range of approximately one order of magnitude was achieved, with reproducibility similar to the assay when performed in a 96-well plate. In bovine serum samples spiked with human IgG, the target molecule was successfully detected in the presence of a 100-fold excess of bovine IgG. It was concluded that the digital microfluidic format is capable of carrying out qualitative and quantitative sandwich immunoassays with a dramatic reduction in reagent usage and analysis time compared to macroscale methods.     

Resonance scattering spectral detection of ultratrace IgG using immunonanogold-HAuCl<Subscript>4</Subscript>-NH<Subscript>2</Subscript>OH catalytic reaction

Nanogold particles of 10 nm were used to label goat anti-human IgG (GIgG) to obtain nanogold-labeled GIgG (AuGIgG). In a citrate-HCI buffer solution of pH 2.27, AuGIgG showed a strong catalytic effect on the reaction between HAuCl₄ and NH₂OH to form big gold particles that exhibited a resonance scattering (RS) peak at 796 nm. Under the chosen conditions, AuGIgG combined with IgG to form immunocomplex AuGIgG-IgG that can be removed by centrifuging at 16000 r/min. AuGIgG in the centrifuging solution also showed catalytic effect on the reaction. On those grounds, an immunonanogold catalytic RS assay for IgG was designed. With addition of IgG, the amount of AuGIgG in the centrifuging solution decreased; the RS intensity at 796 nm (I _{796 nm}) decreased linearly. The decreased intensity ΔI _{796 nm} was linear with respect to the IgG concentration in the range of 0.08–16.0 ng · mL⁻¹ with a detection limit of 0.02 ng · mL⁻¹. This assay was applied to analysis of IgG in sera with satisfactory sensitivity, selectivity and rapidity. Supported by the National Natural Science Foundation of China (Grant No. 20667001), Natural Science Foundation of Guangxi Province (Grant No. 0728213), and the Foundation of New Century Ten-Hundred-Thousand Talents of Guangxi Province     

QDs-labeled microspheres for the adsorption of rabbit immunoglobulin G and fluoroimmunoassay

This paper presents a study on the adsorption of rabbit immunoglobulin G onto CdTe quantum dots (QDs)/polystyrene microspheres. The adsorption appears to be sensitive to pH conditions and ionic strength. Maximum adsorption for protein was obtained near the isoelectric point. Adsorption isotherm analysis demonstrated that the electrostatic interaction plays an important role in the adsorption of protein. The thickness of adsorbed layer calculated from the maximal adsorption amounts (q(m)) is 6.5 nm, which indicates that the rabbit IgG molecules exist between the side-on and end-on mode in the monolayer. The bio-functional rabbit IgG/fluorescent microspheres were further used for the detection of antibody in fluoroimmunoassays. This approach allowed detection of goat anti-rabbit IgG in the range of 1-100 ng/mL.     

Rewritable remote encoding and decoding of miniature multi-bit magnetic tags for high-throughput biological analysis

We have investigated a new magnetic labelling technology for high-throughput biomolecular identification and DNA sequencing. Planar multi-bit magnetic tags comprising a magnetic barcode formed by an ensemble of micron-sized thin film ferromagnetic Co bars and a 15 x 15 micron Au square for immobilization of probe molecules have been designed and fabricated. We show that by using a globally applied magnetic field and magneto-optical Kerr microscopy the magnetic elements in the multi-bit magnetic tags can be addressed individually and encoded/decoded remotely. The power of the approach is the read/write technique, which allows modest globally applied magnetic fields to write almost unlimited numbers of codes to populations of tags rather than individuals. The magnetic nature of the technology also lends itself naturally to fast, remote decoding and the ability to rewrite tags if needed. We demonstrate the critical steps needed to show the feasibility of this technology, including fabrication, remote writing and reading, and successful functionalization of the tags as verified by fluorescence detection. This approach is ideal for encoding information on tags in microfluidic flow or suspension, in order to label oligonucleotides during split-and-mix synthesis, and for combinatorial library-based high-throughput multiplexed bioassays.     

A New Nanogold-Labeled Immunoresonance Scattering Spectral Probe for Determination of Trace IgG

A kind of 9 nm gold nanoparticles was prepared with the trisodium citrate and used to label goat anti-human IgG to obtain an IgG immunoresonance scattering spectral probe. In pH 5.8 buffer solution and in the presence of polyethylene glycol （PEG）, the immune reaction between gold-labeled goat anti-human IgG and IgG took place, and the resonance scattering intensity at 580 nm （I580nm） was enhanced greatly. The enhanced intensity AIRS is pro- portional to the IgG concentration from 1.3 to 1.5 X 10^3 ng.mL^-1, with a detection limit of 0.78 ng.mL ^-1. This assay showed high sensitivity and good selectivity for quantitative determination of IgG in human serum, with satisfactory results.     

Glycidyl methacrylate-co-N-vinyl-2-pyrrolidone coated polypropylene strips: Synthesis, characterization and standardization for dot-enzyme linked immunosorbent assay

Glycidyl methacrylate and N-vinyl-2-pyrrolidone (GMA-co-NVP) copolymers with various GMA:NVP ratios were synthesized by solution polymerization technique in toluene using 2,2′-azobisisobutyronitrile (AIBN) as free radical initiator and dip coated onto polypropylene strips. The copolymer composition in polymeric coatings was confirmed by proton NMR spectroscopy. Various techniques like FTIR, SEM and contact angle were used for surface characterization of the polymer coatings. These polymer coated strips were evaluated and standardized for their application in dot-ELISA in two steps. In first step, specificity, sensitivity and reproducibility of the assay on developed polymer coated strips was evaluated through a model system using rabbit anti-goat IgG, goat anti-rabbit IgG and goat anti-rabbit IgG HRP (horseradish peroxidase)-conjugate. Polymer coating with GMA-NVP mol% ratio of 78:22 was able to detect rabbit anti-goat IgG antibody at a concentration as low as 2 ng mL⁻¹ with 1% BSA as blocking agent using antispecies IgG peroxidase conjugate diluted 1500 times. In the second step, the sensitivity and specificity of the developed system was established with human blood and finally used to identify the source of mosquito blood meal which is an important parameter in epidemiological studies, particularly in determining the role of mosquito in malaria transmission. The time duration of standardized assay with developed polymer coated strips was cut down to one hour compared to the 3-4 h required in usual dot-ELISA.     

Binary optical encoding strategy for multiplex assay

A binary optical encoding strategy is proposed to meet the increasing requirements of multiplex bioassays. As illustrated in fluorescence immunodetection of multiplex antigen molecules, photonic crystal beads (PCBs) and quantum dots (QDs) can be used as biomolecular microcarriers and fluorescence labels, respectively. The categories of antigens were deciphered by the binary combination of optical spectra of PCBs and QDs as independent encoding elements. The number of categories that could be detected was theoretically m × n, where m and n represent the number of encoding PCBs and QDs, respectively. In addition, the concentrations of the antigens were determined by the fluorescence signals of the QDs. Results of sensitivity analysis indicate that a low-level detection of 58 pg/mL was achieved. Because of the special nanostructures of these two encoding elements, the binary encoding strategy demonstrated its superiority and practicability when compared with single PCB or QD encoding. This supports potential application in multiplex bioassays.     

TiO2颗粒表面包覆SiO2纳米膜的动力学模型

针对液相法二氧化钛颗粒表面包覆氧化硅纳米膜的过程,提出包覆过程是溶胶凝胶机制,研究了表面成膜的动力学方程,考察了成膜剂浓度和成膜过程中温度对成膜速度的影响,并通过实验对氧化硅膜形成的动力学方程进行了验证.     

A new enzyme immunoassay for a solid Chinese crude drug, pinellia tuber

A new immunoassay for a solid Chinese crude drug was studied. An antiserum specific for Pinellia tuber was elicited in two rabbits. Using the antiserum and powdered Pinellia tuber-coated microtiter plate as the immunological reagents, and beta-D-galactosidase-labeled goat anti-rabbit immunoglobulin G (IgG) as the tracer, a new enzyme immunoassay for a solid Pinellia tuber with a working range between 0.1 and 1000 micrograms/ml was developed. The assay was specific for a solid Pinellia tuber and showed low cross-reaction values on other Chinese crude drugs and the extract of Pinellia tuber. The specificity of the assay was compared with the selected antibody enzyme immunoassay (SAEIA) for the extract of Pinellia tuber recently developed. Both methods utilized the same immunological reagents such as the serum and the enzyme-labeled goat anti-rabbit IgG, and the only difference between them was the solid-phase antigen used. The assay results of several antigens determined by them were quite different, showing that selective measurements of different antigens, either solid or the extract of Pinellia tuber, were possible using the same antiserum, when the tracing reaction in the immunoassay was adequately selected.     

Profiling protein-surface interactions of multicomponent suspensions via flow cytometry

This study presents the use of flow cytometry as a high-throughput quantifiable technique to study multicomponent adsorption interactions between proteins and surfaces. Flow cytometry offers the advantage of high-throughput analysis of multiple parameters on a very small sampling scale. This enables flow cytometry to distinguish between individual adsorbent particles and adsorbate components within a suspension. As a proof of concept study, the adsorption of three proteins--bovine serum albumin (BSA), bovine immunoglobulin gamma (IgG) and fibrinogen--onto five surface-modified organosilica microsphere surfaces was used as a model multicomponent system for analysis. By uniquely labeling each protein and solid support type with spectrally distinguishable fluorescent dyes, the adsorption process could be "multiplexed" allowing for simultaneous screening of multiple adsorbate (protein) and adsorbent (particle surface) interactions. Protein adsorption experiments quantified by flow cytometry were found to be comparable to single-component adsorption studies by solution depletion. Quantitative distribution of the simultaneous competitive adsorption of BSA and IgG indicated that, at concentrations below surface saturation, both proteins adsorbed onto the surface. However, at concentrations greater than surface saturation, BSA preferentially adsorbed. Multiplexed particle suspensions of optically encoded particles were modified to produce a positively and negatively charged surface, a grafted 3400 MW poly(ethylene glycol) layer, or a physisorbed BSA or IgG layer. It was observed that adsorption was rapid and irreversible on all of the surfaces, and preadsorbed protein layers were the most effective in preventing further protein adsorption.