MPT-AES法测定乳胶手套中的铁、镍、镁、钙、锌

研究了用微波等离子体炬原子发射光谱法(MPT-AES)测定乳胶手套中微量铁、镍、镁、钙、锌元素含量的方法。详细考察了测定铁、镍、镁、钙、锌实验参数,以及介质酸和共存离子干扰情况。实验结果表明,本方法测定铁、镍、镁、钙、锌的检出限分别为77.8、7.55、2.70、276、46.2μg/L,方法的精密度分别为1.52%、0.67%、0.03%、2.53%、0.91%,线性范围分别为0.08~2.5、0.06~2、0.001~3、0.005~2、0.05~1 mg/L,样品测定的加标回收率分别在95%~103%、98%~105%、99%~106%、98%~104%、97%~106%之间。结果令人满意。     

MPT-AES法同时测定航空润滑油中铁、银和镍

用微波等离子体炬原子发射光谱法(MPT-AES)同时测定未使用过的航空润滑油中铁、银和镍的方法。详细考察了微波功率、载气流量、工作气流量、氧屏蔽气压力等实验参数对铁、银和镍发射强度的影响,并进行了系统优化。测得铁、银和镍的检出限分别为21.94ng/mL0、.36ng/mL9、.82ng/mL,线性范围分别为0.1~100μg/mL、0.001~8μg/mL、0.05~8μg/mL,各元素测定结果的相对标准偏差均小于3.95%,回收率在93.1%~107.4%之间。     

微波消解-ICP-MS法测定硫磺中18种微量元素

建立了用微波消解-电感耦合等离子体质谱法(ICP-MS)同时测定硫磺中18种微量元素(锂、镁、铝、钙、钒、铬、锰、铁、钴、镍、铜、锌、镉、砷、硒、钡、铅和汞)的定量分析方法。通过对消解所用试剂及条件进行研究,确定最佳的样品处理条件;为了获得最佳的信噪比并降低光谱干扰,研究采用单变量方法,对ICP-MS的射频功率和雾化气体流量等因素进行了性能优化。结果显示：该方法各元素的校准曲线线性相关系数在0.999以上,所有元素的检出限(LODs) 在0.001-0.962 mg/Kg之间,测定下限范围在0.004-3.85 mg/Kg之间,回收率在82.9 %~115 %之间,相对标准偏差均小于3 %。     

微波消解原子吸收光谱法测定鱼肉中14种金属元素

以微波消解法处理鱼肉样品,用火焰原子吸收光谱法测定鲶鱼、胖头鱼、小黄花鱼、鲫鱼4种鱼肉中的钾、钠、镁、钙、铁、钴、镍、铜、锌、锰、锶、铬、镉和铅元素含量。鱼肉样品以5 mL HNO_3和1 mL H_2O_2在一定的温度和时间下经微波消解处理后,在最佳工作条件下测定以上14种金属元素含量,各元素的加标回收率在95.4%~104.6%之间,检出限为0.001 1~0.012 9μg/mL,标准工作曲线的线性相关系数均大于0.999,该方法测定结果的相对标准偏差为0.71%~4.28%(n=10)。该方法适用于鱼肉中钾、钠、镁、钙、铁、钴、镍、铜、锌、锰、锶、铬、镉和铅14种金属元素的含量测定。     

微波消解-溶出伏安法对食品中铜、铅、镉的同时测定

采用微波消解结合同位镀汞阳极溶出伏安法对茶叶、紫菜和西洋菜等食品中的铜、铅、镉进行了测定,并优化了微波消解、电解缓冲液、富集电位等实验条件。采用标准加入法定量,Cu、Pb、Cd的线性范围分别为0.040~1.768、0.080~1.768、0.040~1.768 mg/L,相关系数分别为0.998 4、0.998 2、0.997 0,检出限分别为0.008、0.016、0.008 mg/L,相对标准偏差(n=5)分别为4.1%、0.92%、2.0%。该方法测定茶叶、紫菜、西洋菜等实际样品的铜、铅、镉含量,加标回收率分别为98%~109%、94%~103%、100%~112%;将测定结果与原子吸收光谱法检测结果对比,表明此方法简便、快速,且具有较高的灵敏度、较好的选择性和可靠性。     

微波消解-电感耦合等离子体发射光谱法测定固体生物质燃料中8种元素

建立电感耦合等离子体发射光谱法同时测定固体生物质燃料中钾、钠、钙、镁、砷、铜、铁、锰8种元素的含量。样品采用5 mL硝酸溶液和2 mL过氧化氢溶液进行微波消解,在选定的仪器工作条件下进行测定。钠、钙、镁、砷、铜、铁、锰的质量浓度在0～5.0 mg/L,钾的质量浓度在0～50.0 mg/L范围内与光谱强度具有良好的线性关系,相关系数均大于0.999,方法检出限为0.002～0.022 mg/L。样品的加标回收率为91.9%～108.2%,测定结果的相对标准偏差为2.1%～6.8%(n=6)。该方法简便、快速、高效且准确,适用于固体生物质燃料中钾、钠、钙、镁、砷、铜、铁、锰的测定。     

微波消解-电感耦合等离子体原子发射光谱测定5种食用菌中微量元素

采用HNO3+H2O2(体积比3∶2)为消化剂,建立了微波消解-电感耦合等离子体原子发射光谱法(ICP-AES)测定白玉菇、香菇、双孢蘑菇、金针菇和糙皮侧耳5种食用菌中砷、汞、镉、铅、锡、钴、钼、硒、镁、钙、钾、磷、铁、锌、钠、锰、铜、铝、钡和钛20种元素的含量。结果表明:各元素的平均回收率在95.58%~105.65%之间,相对标准偏差(RSD)在0.84%~4.13%范围,检出限为0.015~10.20μg/L。该方法简便、快速、准确,适用于食用菌中上述20种元素的同时测定。     

微波消解-火焰原子吸收法测定豌豆中微量元素锰、锌、铜、铁的含量

探讨了采用微波消解法处理样品,以FAAS法在同一体系中测定豌豆中微量元素锰、锌、铜、铁的方法,包括硝酸、过氧化氢的用量以及消化时间长短对实验的不同影响和在同一体系中锰、锌、铜、铁的彼此干扰情况。在选定的条件下,测得豌豆中锰、锌、铜、铁的含量分别为:锰10.05 mg/g、锌9.48 mg/g、铜3.06 mg/g、铁18.30 mg/g,回收率96.8%~98.9%。     

微波消解/等离子体发射光谱法测定蒙药哈日阿-布日-16中的多种元素

采用高压密封微波消解,以V(HNO3) V(HClO4)=5 1为溶样试剂,电感耦合等离子体原子发射光谱法(ICP-AES)测定了蒙古药—哈日阿-布日-16中的镁、钙、铬、锰、铁、钴、镍、铜、锌、锶、银、镉、铅等金属元素的含量。结果表明,回收率为99.5%~104.7%,RSD为0.4%~2.3%。哈日阿-布日-16中的多种金属元素,尤其镁、钙、锌、锶的含量较高,未测到有铅、银等元素。     

微波消解-火焰原子吸收光谱法测定中药女贞子中9种金属元素

用微波消解法处理样品,用硝酸-过氧化氢(4+1)混合溶液作为消解剂进行微波消解,火焰原子吸收光谱法测定了中药女贞子中钙、镁、钾、钠、铁、锶、锰、铜和锌元素含量。9种元素检出限(3S/N)在0.000 6~0.024 8 mg.L-1之间,回收率在93.0%~107.3%之间,相对标准偏差(n=10)在0.86%~4.39%之间。试验结果表明:女贞子中钾、钙、镁、铁、钠、锌、锰、铜和锶质量分数分别为16 940,1 790,1 640,467.8,116.0,24.5,15.0,9.6,1.9μg.g-1,锌与铜含量的比值为2.55。由此可见,女贞子中钙、镁、钾元素含量丰富,铁含量也较高。为探讨中药金属元素种类及含量与治疗心血管疾病的关系等提供有用数据。     

电感耦合等离子体发射光谱法(ICP-AES)测定高铼酸钾中的19种杂质元素

建立了一种用稀盐酸溶解样品,标准工作溶液中匹配钾,ICP-AES测定高铼酸钾中19种杂质元素的方法。在选定的仪器工作条件下,样品加标回收率(%)分别为：钠94.4～101、钙98.8～102、铝98.1～102、镁95.8～99.1、钴98.4～101、钼97.3～103、钛97.6～102、钒96.6～106、锆96.2～97.7、铬97.8～101、铜98.1～108、铁92.9～104、锰95.5～98.4、镍93.6～101、钯93.3～101、铅96.5～103、锌95.2～103、铂95.9～99.9、铑94.5～96.3;方法精密度RSD%(n=7)分别为：钠2.0～5.5、镁1.1～3.5、铝0.9～2.5、钙1.5～7.3、钴1.1～3.1、钼0.9～4.5、钛1.0～2.8、钒1.6～4.0、锆1.4～3.6、铬0.77～4.6、铜0.74～1.8、铁1.3～3.8、锰1.1～2.0、镍0.99～5.0、钯1.1～2.4、铅1.3～9.1、锌0.80～6.7、铂1.2～10、铑0.78～8.6。方法简便、快速、准确, 满足生产分析要求。     

Study on Determination of Six Transition Metal Ions in Biological Samples by SPE and RP‐HPLC

This paper reports the utilization of solid phase extraction and the reversed‐phase high‐performance liquid chromatography (RP‐HPLC) for the determination of six transition metal ions (iron, cobalt, nickel, copper, zinc and manganese) in biological samples. The samples were digested by microwave digestion. The iron, cobalt, nickel, copper, zinc and manganese ions in the digested samples can react with 2‐(2‐quinolinylazo)‐5‐diethylaminophenol (QADEAP) to form colored chelates in pH 4.0 acetic acid‐sodium acetic buffer solutions and cetyl trimethylammonium bromide (CTMAB) medium. These chelates were enriched by solid phase extraction with C₁₈ cartridge. Then the chelates were separated on a Waters Nova‐Pak‐C₁₈ column (3.9 × 150 mm, 5 μm) by gradient elution with methanol (containing 0.5% of acetic acid and 0.1% of CTMAB) and 0.05 mol/L pH 4.0 acetic acid‐sodium acetic buffer solution (containing 0.1% of CTMAB) as mobile phase at a flow rate of 0.5 mL/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 3 ng/L, 4 ng/L, 2 ng/L, 4 ng/L, 8 ng/L, 10 ng/L, respectively. This method was applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in biological samples with good results.     

电感耦合等离子体原子发射光谱(ICP-AES)法测定再生锌原料中铜、铅、铁、铟、镉、砷、钙、铝

采用硝酸、盐酸、氢氟酸(氟化氢铵)、高氯酸分解样品,电感耦合等离子体原子发射光谱法测定了再生锌原料中铜、铅、铁、铟、镉、砷、钙、铝的量。其测定范围:ω(Cu):0.01%～0.60%;ω(Pb):0.10%～5.00%;ω(Fe):0.10%～5.00%;ω(In):0.0100%～0.200%;ω(Cd):0.010%～3.00%;ω(As):0.10%～2.00%;ω(Ca):0.10%～10.00%;ω(Al):0.10%～4.00%。各元素的加标回收率为93%～113%。方法准确、快速、可靠,适用于再生锌原料中铜、铅、铁、铟、镉、砷、钙、铝量的同时测定。     

微波消解原子发射光谱法测定鲍鱼中微量元素的含量

用硝酸-过氧化氢作消解液,用微波消解法处理样品,采用电感耦合等离子体原子发射光谱法测定了鲍鱼中锌、铁、锰和铜的含量。测定结果的相对标准偏差RSD<4%,加标回收率在97.4%~105.0%之间,检出限在0.764~1.539μg/L之间。该法快速、稳定、准确,结果令人满意。     

电感耦合等离子体光谱法(ICP-AES)测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量

针对银精矿样品复杂,难消解的特点,研究了不同酸溶法和碱熔法对样品的消解情况,建立了硝酸,盐酸,氢氟酸,高氯酸消解银精矿的方法。根据元素灵敏度和抗干扰性,选定各元素的测定波长。通过酸溶样和碱熔样测定结果比对,验证了方法准确性。建立了四酸消解-电感耦合等离子体光谱法测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的方法,元素的线性相关系数均在0.9999以上。通过共存元素干扰实验,确定了银精矿中高含量元素(铜、铅、锌、铁、锑、铋等)对测定元素结果没有影响。方法检出限：Cu 0.0063 mg/L, Pb 0.0159 mg/L ,Zn 0.0090 mg/L,As 0.0192 mg/L, Cd 0.0093 mg/L ,Ca 0.0084 mg/L, Mg 0.0075 mg/L, Mn 0.0081 mg/L。测定下限：Cu 0.0105mg/L,Pb 0.0265 mg/L, Zn 0.0150 mg/L, As 0.0320 mg/L, Cd 0.0155 mg/L, Ca 0.0140 mg/L, Mg 0.0125 mg/L,Mn 0.0135 mg/L。3个样品的相对标准偏差在0.87%~3.56%之间,加标回收率在95.00%~103.56%之间。方法流程短,操作简单,快速,灵敏度和再现性高,结果准确可靠,可以满足银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的测定。     

Direct determination of selenium in a wild fruit juice by electrothermal atomic absorption spectrometry

A matrix modifier composed of platinum and nickel is proposed for the determination of selenium in a wild fruit juice made from Lantingguo (Vuccinium uliginosam). Five matrix modifiers (copper/nickel, palladium/magnesium, platinum/magnesium, platinum/nickel and platinum/copper) for suppressing the interference effects of seven co-existing elements (potassium, phosphorus, calcium, magnesium, manganese, zinc and iron) in a wild juice were studied and a matrix modifier composed fro;m 10 mug of platinum and 200 mug of nickel was found to give the best performance. Selenium in three juices was determined by electrothermal atomic absorption spectrometry employing the proposed matrix modifier without matrix preseparation. The relative standard deviation was 14% for 0.20 mg l(-1) of selenium. The recoveries were 95-110%. A characteristic mass was 28 pg.     

Study on the Determination of Cobalt,Nickel, Copper,Zinc and Vanadium in Environmental Samples by a Rapid High‐Performance Liquid Chromatography

A new method for the simultaneous determination of five transition metal ions in water and food by rapid high‐performance liquid chromatography was developed. The cobalt, nickel, copper, zinc and vanadium ions were pre‐column derivatized with 2‐(2‐quinolinylazo)‐4‐methyl‐1,3‐dihydroxidebenzene (QAMDHB) to form colored chelates, then the Co‐QAMDHB, Ni‐QAMDHB, Cu‐QAMDHB, Zn‐QAMDHB and V‐QAMDHB chelates were enriched by solid phase extraction with a C18 cartridge. The enrichment factor of 50 was achieved by eluting the retained chelates from the cartridge with tetrahydrofuran (THF). These chelates were separated on a ZORBAX Stable Bound rapid analysis column (4.6 × 50 mm, 1.8 um) with 68% methanol (containing 0.1% of acetic acid and 0.1% of CTMAB) as mobile phase at a flow rate of 2.0 mL/min and detected with a photodiode array detector from 450?600 nm. The Co‐QAMDHB, Ni‐QAMDHB, Cu‐QAMDHB, Zn‐QAMDHB and V‐QAMDHB chelates were separated completely within 2.0 min. The detection limits of cobalt, nickel, copper, zinc and vanadium are 2 ng/L, 1.5 ng/L, 2 ng/L, 3 ng/L, and 3 ng/L, respectively, in the original samples. This method was applied to the determination of the five transition metal ions in water and food samples with good results.     

空气 - 乙炔火焰原子吸收法连续测定铜粉中微量Fe、Pb、Sb、Zn和Ni

用HNO3-HCl溶解试样,在几个相同量的试液中,分别加入质量浓度依次递增的5种元素的标准溶液,用火焰原子吸收法连续测定了Fe、Pb、Sb、Zn和Ni的含量,建立了优化的仪器测定条件,并对可能存在的元素进行了干扰试验。结果表明,Fe、Pb、Sb等5种元素的回收率为98.0%～102.3%,相对标准偏差为1.4%～2.5%。     

微波等离子体炬原子发射光谱法测定铁增敏效应

针对在低功率下工作的微波等离子体炬原子发射光谱法(MPT-AES)存在对一些元素检测灵敏度较低和抗基体干扰能力弱的问题,以氩气为载气和工作气,研究了表面活性剂及镧盐对MPT-AES测定铁的增敏效应,考察了铁测定的工作条件和共存元素对铁测定的影响.实验结果表明,非离子表面活性剂对铁的测定有抑制作用,而阳离子表面活性剂和镧盐对铁的测定有增敏作用,其中镧盐增敏效果最好.以镧盐为增敏剂,不仅可提高MPT-AES测定铁的灵敏度,还可增加共存元素的允许量.当体系中镧浓度为0.500 mg/m L时,至少可使40倍的锌,30倍的钴,20倍的镍、锰,15倍的钙,10倍的镁、铜和钠不影响铁的测定.与不加镧时相比,铁的发射强度提高了2.4倍,检出限由原来的27.5×10~(-3)μg/m L下降为8.5×10~(-3)μg/m L.将本方法应用于原油样品中铁的测定,所得结果与火焰原子吸收光谱法测定结果一致.     

Determination of traces of calcium, magnesium, iron and nickel in aluminium salts by atomic-absorption spectrophotometry with a microwave-excited source and hollow-cathode lamps

The determination of trace amounts of calcium and magnesium in solutions containing large concentrations of aluminium salts may be accomplished by co-precipitating their hydroxides on iron(III) hydroxide, dissolving the precipitate, and extracting the 8-hydroxyquinolates of calcium and magnesium into methyl isobutyl ketone at about pH 11. The extract may be sprayed into the airpropane flame of a simple unmodulated spectrophotometer and atomic-absorption measurements for calcium and magnesium made at 4227 and 2852 A respectively. The limits of determination correspond to 10 and 1 ppm of calcium and magnesium in solid alumina. Iron and nickel may be co-precipitated on hydrated manganese(IV) oxide and their 8-hydroxyquinolates extracted at pH 4.5. Measurements of atomic absorption for these elements at 2483 and 2320 A respectively yield limits of determination corresponding to 10 ppm in alumina. Hollow-cathode lamps may be used for calcium, magnesium and nickel, but a simple microwave-excited discharge tube gives much better sensitivity than a hollow-cathode lamp for iron.