Use of Adsorbents for Recovery of Acetic Acid from Aqueous Solutions Part III—Solvent Regeneration

Solvent leaching was investigated as a method of regeneration for activated carbons and polymer sorbents loaded with acetic acid by contact with aqueous solutions. Both batch-equilibration and fixed-bed experiments were employed. Methanol, methyl acetate, and acetone are suitable regeneration solvents for most activated carbons. Amoco GX-031 is an exception, giving incomplete regeneration. Methanol provides still more efficient regeneration for macroreticular styrene-divinylbenzenes adsorbents. Among basic sorbents, amine resins give incomplete regeneration by solvent leaching, as does a poly N oxide. Polybenzimidazole, a weaker base, gives higher recoveries of acetic acid when leached by solvents. Poly(4-vinylpyridine) is regenerated completely and efficiently by methanol, methyl acetate, and acetone in a fixed-bed geometry. It thus appears that an intermediate degree of basicity is desirable in a synthetic sorbent for acetic acid – strong enough to give the uptake benefits of acid-base interactions, but weak enough to be regenerable.     

Study of the possibility of regeneration of activated carbon spent in water treatment processes using the chemical regeneration and thermal reactivation

Various methods of regeneration of activated carbon, including that obtained after water purification, were studied. The chemical regeneration with aqueous alkaline solutions and thermal reactivation with steam in an inert environment were chosen as main methods. It was shown that thermal reactivation is advantageous over chemical regeneration. The optimal conditions of carbon regeneration evaluated by sorption capacity for Methyelene blue and iodine were determined.     

Assessment of Genetic Stability and Instability of Tissue Culture-Propagated Plantlets of Aloe vera L. by RAPD and ISSR Markers

Efficient plantlet regeneration with and without intermediate callus phase was achieved for a selected genotype of Aloe vera L. which is sweet in test and used as a vegetable and source of food. Random amplified polymorphic DNA (RAPD) and inter simple sequence repeats (ISSR) marker assays were employed to evaluate genetic stability of plantlets and validate the most reliable method for true-to-type propagation of sweet aloe, among two regeneration systems developed so far. Despite phenotypic similarities in plantlets produced through both regeneration systems, the differences in genomic constituents of plantlets produced through intermediate callus phase using soft base of inflorescence have been effectively distinguished by RAPD and ISSR markers. No polymorphism was observed in regenerants produced following direct regeneration of axillary buds, whereas 80% and 73.3% of polymorphism were observed in RAPD and ISSR, respectively, in the regenerants produced indirectly from base of the inflorescence axis via an intermediate callus phase. Overall, 86.6% of variations were observed in the plantlets produced via an intermediate callus phase. The occurrence of genetic polymorphism is associated with choice of explants and method used for plantlet regeneration. This confirms that clonal propagation of sweet aloe using axillary shoot buds can be used for commercial exploitation of the selected genotype where a high degree of fidelity is an essential prerequisite. On the other hand, a high degree of variations were observed in plantlets obtained through indirect regeneration and thus cannot be used for the mass multiplication of the genotype; however, it can be used for crop improvement through induction of somaclonal variations and genetic manipulations.     

Effects of Ivermectin Exposure on Regeneration of D. dorotocephala Planaria: Exploiting Human‐Approved Ion Channel Drugs as Morphoceuticals

Transformative applications in regenerative medicine await increased control of processes implementing repair and remodeling of complex living structures. Recent work reveals ion channel drugs as a powerful toolkit for modulating endogenous bioelectric circuits that control growth and form in vivo and in vitro. It is therefore especially important to develop assays in model systems that will enable the testing of these “morphoceuticals”—compounds with predictable effects on anatomical structure. The regenerative planaria are an ideal model system for this purpose. Several studies have shown a role for bioelectric signaling in planarian regeneration, but these have focused on Dugesia japonica and Schmidtea mediterranea. It is not known how the alterations of ion channel activity would affect regeneration in other species of planaria—an important aspect of building robust computational models of bioelectric circuits. Here, the effect of ivermectin (IVM), a chloride channel opener drug commonly used to combat heartworm is tested, on regeneration in a new species of planaria: Dugesia dorotocephala. Exposure to IVM during regeneration results in patterning abnormalities, such as bifurcated tails with partial heads, as well as delayed regeneration. These data extend our understanding of the effects of human‐approved ion channel drugs on regenerative processes.     

Tofu as excellent scaffolds for potential bone regeneration

Biomimetic scaffolds present the promising potential for bone regeneration. As a natural gel-like traditional food, tofu with porous architecture and proved biological safety indicated a good potential to be a natural scaffold and easy to be improved by surface modification. Hereon, we fabricated the tofu-based scaffolds and systematically explored the potential for bone tissue engineering. In addition, the collagen has been introduced by simple coating to further enhance the surface compatibility of the tofu-based scaffold in bone regeneration. The results showed that the tofu-based scaffolds possessed good porous structure and cytocompatibility. Notably, the tofu-based scaffolds could improve the expression of osteogenesis-related genes and proteins, leading to better bone regeneration after 2 months of implantation. All the results indicated that tofu would become an outstanding sustainable natural porous scaffold for bone regeneration with excellent bioactivities.     

Tofu as excellent scaffolds for potential bone regeneration

Biomimetic scaffolds present the promising potential for bone regeneration. As a natural gel-like traditional food, tofu with porous architecture and proved biological safety indicated a good potential to be a natural scaffold and easy to be improved by surface modification. Hereon, we fabricated the tofubased scaffolds and systematically explored the potential for bone tissue engineering. In addition, the collagen has been introduced by simple coating to further enhance the surface compatibility of the tofubased scaffold in bone regeneration. The results showed that the tofu-based scaffolds possessed good porous structure and cytocompatibility. Notably, the tofu-based scaffolds could improve the expression of osteogenesis-related genes and proteins, leading to better bone regeneration after 2 months of implantation. All the results indicated that tofu would become an outstanding sustainable natural porous scaffold for bone regeneration with excellent bioactivities.     

Stereospecific biocatalytic epoxidation: the first example of direct regeneration of a FAD-dependent monooxygenase for catalysis

Catalysis for chemical synthesis by cell-free monooxygenases necessitates an efficient and robust in situ regeneration system to supply the enzyme with reducing equivalents. We report on a novel approach to directly regenerate flavin-dependent monooxygenases. The organometallic complex [CpRh(bpy)(H(2)O)](2+) catalyzes the transhydrogenation reaction between formate and isoalloxazine-based cofactors such as FAD and FMN. Coupling this FADH(2) regeneration reaction to the FADH(2)-dependent styrene monooxygenase (StyA) resulted in a chemoenzymatic epoxidation reaction where the organometallic compound substitutes for the native reductase (StyB), the nicotinamide coenzyme (NAD), and an artificial NADH regeneration system such as formate dehydrogenase. Various styrene derivatives were converted into the essentially optically pure (S)-epoxides (ee > 98%). In addition, StyA was shown to be capable of performing sulfoxidation reactions. The productivity of the chemoenzymatic epoxidation reaction using 6.5 microM StyA reached up to 6.4 mM/h, corresponding to approximately 70% of a comparable fully enzymatic reaction using StyB, NADH, and formate dehydrogenase for regeneration. The coupling efficiency of the nonenzymatic regeneration reaction to enzymatic epoxidation was examined in detail, leading to an optimized reaction setup with minimized quenching of the electron supply for the epoxidation reaction. Thus, up to 60% of the reducing equivalents provided via [CpRh(bpy)(H(2)O)](2+) could be channeled into epoxide rather than hydrogen peroxide formation, allowing selective synthesis with high yields.     

Photosensitive materials and potential of photocurrent mediated tissue regeneration

Photocurrent therapy with participation of light and electrical stimulations could be an innovative and promising approach in regenerative medicine, especially for skin and nerve regeneration. Photocurrent is generated when light irradiates on a photosensitive device, and with more and more types of photosensitive materials being synthesized, photocurrent could be applied for enhanced regeneration of tissue. Photosensitive scaffolds such as composite poly (3-hexylthiophene)/polycaprolactone (P3HT/PCL) nanofibers are fabricated by electrospinning process in our lab for skin regeneration in presence of applied photocurrent. This review article discuss on the various in vitro, in vivo and clinical studies that utilized the principle of 'electrotherapy' and 'phototherapy' for regenerative medicine and evaluates the potential application of photocurrent in regenerative medicine. We conclude that photocurrent therapy will play an important role in regenerative medicine.     

ELECTRIC REGENERATION METHOD OF ION EXCHANGE RESIN IN THE MIXED BED

In this paper,the self-regeneration process of the mixed resins consisting of cation and anion ion exchangers in the electrolialyser of the packed bed is analyzed,and an electric regeneration method is put forward to supply the desalinated water by mixed bed.The electric regeneration technology is a new one used for regeneration of the exhausted ion exchangers in the mixed bed,instead of the traditional regenerating process by using acid and alkali liquor.Electric energy is consumed to regenerate the ion exchangers loaded by salts from water treatment without any chemicals-acid and alkali.The advantage of the electric regeneration process exhibited convenient operation,no discharge any waste,and therefore no pollution to the receiving water body and the environmental ground.     

A Telomerase-Assisted Strategy for Regeneration of DNA Nanomachines in Living Cells

DNA nanomachines have been engineered into diverse personalized devices for diagnostic imaging of biomarkers; however, the regeneration of DNA nanomachines in living cells remains challenging. Here, we report an ingenious DNA nanomachine that can implement telomerase (TE)-activated regeneration in living cells. Upon apurinic/apyrimidinic endonuclease 1 (APE1)-responsive initiation of the nanomachine, the walker of the nanomachine moves along tracks regenerated by TE, generating multiply amplified signals through which APE1 can be imaged in situ. Additionally, augmentation of the signal due to the regeneration of the nanomachines could reveal differential expression of TE in different cell lines. To the best of our knowledge, this is the first proof-of-concept demonstration of the use of biomarkers to assist in the regeneration of nanomachines in living cells. This study offers a new paradigm for the development of more applicable and efficient DNA nanomachines.     

Synergistic Effects of Beta Tri‐Calcium Phosphate and Porcine‐Derived Decellularized Bone Extracellular Matrix in 3D‐Printed Polycaprolactone Scaffold on Bone Regeneration

Bone‐derived extracellular matrix (ECM) is widely used in studies on bone regeneration because of its ability to provide a microenvironment of native bone tissue. However, a hydrogel, which is a main type of ECM application, is limited to use for bone graft substitutes due to relative lack of mechanical properties. The present study aims to fabricate a scaffold for guiding effective bone regeneration. A polycaprolactone (PCL)/beta‐tricalcium phosphate (β‐TCP)/bone decellularized extracellular matrix (dECM) scaffold capable of providing physical and physiological environment are fabricated using 3D printing technology and decoration method. PCL/β‐TCP/bone dECM scaffolds exhibit excellent cell seeding efficiency, proliferation, and early and late osteogenic differentiation capacity in vitro. In addition, outstanding results of bone regeneration are observed in PCL/β‐TCP/bone dECM scaffold group in the rabbit calvarial defect model in vivo. These results indicate that PCL/β‐TCP/bone dECM scaffolds have an outstanding potential as bone graft substitutes for effective bone regeneration.     

Optimization of an immunoassay of 2,6-dichlorobenzamide (BAM) and development of regenerative surfaces by immunosorbent modification with newly synthesised BAM hapten library

Dichlobenil is an extensively used herbicide worldwide which is transformed to the mobile 2,6-dichlorobenzamide (BAM) in soil. BAM has been found in many European groundwater resources that are exploited for drinking water. Currently, immunoassay based monitoring technique (plate based ELISA) is being employed to quantitatively detect BAM in water samples. In this work, as a starting step of developing immunoassay based on-site monitoring systems for pesticide analysis, the heterogeneous BAM immunoassay is optimised in terms of surface (polymer) regeneration. We have synthesised a small library of BAM haptens which are slightly different in chemical structures, immobilised them on surfaces and compared the affinity constants of the monoclonal antibody HYB 273 towards them. By using ELISA technology, we also have checked the regeneration potentials of the haptens, correlated these results to the affinity constants and found that BAM hapten with an intermediate affinity has better regeneration potential.     

Determination of parameters of a mathematical model for regeneration of a chromium-aluminum catalyst for gas-phase perchloroethylene hydrofluorination into pentafluoroethane (Freon 125)

The regeneration of the coked catalyst of gas-phase perchloroethylene hydrofluorination to pentafluoroethane (Freon 125) has been investigated at 370–420°C and atmospheric pressure. The parameters of the mathematical model (rate constant and activation energy) for coke combustion have been determined from the experimental data obtained in a laboratory reactor and from thermoanalytical data. The data obtained have provided a basis for optimization of catalyst regeneration in an industrial reactor.     

Laminar flow-based electrochemical microreactor for efficient regeneration of nicotinamide cofactors for biocatalysis

One of the long-standing challenges in biocatalysis is the search for methods to continuously regenerate essential cofactors such as NADH that would enable a wide range of enzymes to be used in the more environmentally friendly synthesis of chiral fine chemicals including pharmaceuticals, cosmetics, and food additives. This communication reports a microreactor-based cofactor regeneration method that exploits the microfluidic phenomenon of laminar flow: a reactant stream and a buffer stream are introduced in a microchannel and continue to flow side by side without turbulent mixing between two electrodes that cover opposing channel walls. Adjustment of the flow rate ratio of the two streams in laminar flow enables focusing of the reactant stream close to the cathode, thereby reversing a normally unfavorable reaction equilibrium essential for cofactor regeneration. The absence of a bulk phase in these microreactors prevents the undesired reverse reaction to take place, which has prevented the use of electrochemical cofactor regeneration in macroscale processes. Here, we demonstrate the regeneration of NADH with conversion efficiencies as high as 31%. We also show the subsequent in situ conversion of an achiral substrate, pyruvate, into a chiral product, l-lactate, within this microreactor.     

Biomaterial-induced macrophage polarization for bone regeneration

As the main target cells of immune regulation, macrophages play an important role in the bone regeneration process. Macrophages can be polarized into the M1 and M2 types under the stimulation of different factors. They have proinflammatory and anti-inflammatory effects, respectively, and play key roles in different stages of bone regeneration. The ratio of M1 to M2 macrophages can be regulated by immunomodulatory biomaterials to promote bone repair and regeneration. In this paper, we review the recent literature on the chemical, physical and biological properties of biomaterials and the regulation of macrophage polarization under the influence of other factors. We also cover new methods for preparing immunomodulatory biomaterials for bone regeneration. This paper will provide new design ideas for the development of biomaterials with immunological properties and will support the clinical translation of bone-related medical biomaterials.     

Non‐classical Design of High‐Efficiency Sensitizers for Dye‐Sensitized Solar Cells

The dye regeneration step in a dye‐sensitized solar cell (DSSC) affects significantly the device efficiency. To be able to predict the dye regeneration efficiency by the electrolyte this paper provides a facile way to design high‐efficiency sensitizers for DSSC. This paper proposes, for the first time, a simple and ingenious way to identify the dye regeneration sites and their relative efficiencies when a specific electrolyte is used. Two steps are proposed to identify the dye regeneration sites and their relative regeneration efficiencies: (1) drawing all the resonance structures of the oxidized dye to determine the regeneration sites, and (2) choosing the most favored site for dye regeneration as the chemically softest (when the redox couple used is soft I⁻/I₃⁻ pair) and the least spatially hindered site. The regeneration sites identified by the resonance structures are consistent with the β‐LUSO (β lowest unoccupied spin orbital) distribution, which is generally used for identifying the dye regeneration sites, calculated with DT‐DFT theory. The relative dye regeneration efficiency and photovoltaic performance of both ruthenium and metal‐free organic dyes predicted by the method reported here are supported by experimental data and the proposed dye regeneration mechanism. Several types of dye molecules are used to demonstrate the correctness of this new tool. This non‐classical tool, which uses the well‐known chemical knowledge of the resonance structure and hard–soft acid–base principle, without any computer calculation or physicochemical measurement, provides a very simple and powerful tool to quickly conceive high‐efficiency sensitizers for DSSCs.     

Collagen-Derived Biomaterials in Bone and Cartilage Repair

Summary: We have analyzed a number of collagen-derived biomaterials for the matrix- induced and assisted bone and cartilage tissue regeneration. These include the Small intestine submuosa (SIS) Restor ™, ACI-Maix collagen membrane, Chondro- Gide collagen membrane, Permacol collagen Ossix and lycoll collagen membrane and five types of collagen-based marine sponge skeletons. Certain characteristics of different scaffold materials with comparable chemical composition may vary significantly. This variation may have a relevant impact on the suitability of the scaffolds for bone and cartilage regeneration. It suggests that the ACI-Maix® membrane is the best available collagen-derived material for an MACI®/MACT® application. In addition, the study of marine sponge indicates that the collagenous fibre skeleton of marine sponges provides a suitable bioscaffold for bone regeneration, as it supports the adhesion, migration and proliferation of osteoblasts in vitro.     

Tissue engineering and peripheral nerve regeneration (Ⅲ)——Sciatic nerve regeneration with PDLLA nerve guide

The biodegradation rate and biocompatibility of poly(d, / -lactide) (PDLLA) in vivo were evaluated. The aim of this study was to establish a nerve guide constructed by the PDLLA with 3-D microenvironment and to repair a 10 mm of sciatic nerve gap in rats. The process of the nerve regeneration was investigated by histological assessment, electrophysiological examination, and determination of wet weight recovery rate of the gastrocnemius muscle. After 3 weeks, the nerve guide had changed from a transparent to an opaque status. The conduit was degraded and absorbed partly and had lost their strength with breakage at the 9th week of postoperation. At the conclusion of 12 weeks, proximal and distal end of nerves were anastomosed by nerve regeneration and the conduit vanished completely. The results suggest that PDLLA conduits may serve for peripheral nerve regeneration and PDLLA is a sort of hopeful candidate for tissue engineering.     

Biochemical reaction engineering for redox reactions

Redox reactions are still a challenge for biochemical engineers. A personal view for the development of this field is given. Cofactor regeneration was an obstacle for quite some time. The first technical breakthrough was achieved with the system formate/formate dehydrogenase for the regeneration of NADH2. In cases where the same enzyme could be used for chiral reduction as well as for cofactor regeneration, isopropanol as a hydrogen source proved to be beneficial. The coproduct (acetone) can be removed by pervaporation. Whole-cell reductions (often yeast reductions) can also be used. By proper biochemical reaction engineering, it is possible to apply these systems in a continuous way. By cloning a formate dehydrogenase and an oxidoreductase "designer bug" can be obtained where formate is used instead of glucose as the hydrogen source. Complex sequences of redox reactions can be established by pathway engineering with a focus on gene overexpression or with a focus on establishing non-natural pathways. The success of pathway engineering can be controlled by measuring cytosolic metabolite concentrations. The optimal exploitation of such systems calls for the integrated cooperation of classical and molecular biochemical engineering.     

Tissue engineering and peripheral nerve regeneration (III) -- Sciatic nerve regeneration with PDLLA nerve guide

The biodegradation rate and biocompatibility of poly(d, l -lactide) (PDLLA) in vivo were evaluated. The aim of this study was to establish a nerve guide constructed by the PDLLA with 3-D microenvironment and to repair a 10 mm of sciatic nerve gap in rats. The process of the nerve regeneration was investigated by histological assessment, electrophysiological examination, and determination of wet weight recovery rate of the gastrocnemius muscle. After 3 weeks, the nerve guide had changed from a transparent to an opaque status. The conduit was degraded and absorbed partly and had lost their strength with breakage at the 9th week of postoperation. At the conclusion of 12 weeks, proximal and distal end of nerves were anastomosed by nerve regeneration and the conduit vanished completely. The results suggest that PDLLA conduits may serve for peripheral nerve regeneration and PDLLA is a sort of hopeful candidate for tissue engineering.