Effects of Structural Variations on the Cellular Response and Mechanical Properties of Biocompatible,Biodegradable, and Porous Smectic Liquid Crystal Elastomers

The authors report on series of side‐chain smectic liquid crystal elastomer (LCE) cell scaffolds based on star block‐copolymers featuring 3‐arm, 4‐arm, and 6‐arm central nodes. A particular focus of these studies is placed on the mechanical properties of these LCEs and their impact on cell response. The introduction of diverse central nodes allows to alter and custom‐modify the mechanical properties of LCE scaffolds to values on the same order of magnitude of various tissues of interest. In addition, it is continued to vary the position of the LC pendant group. The central node and the position of cholesterol pendants in the backbone of ε‐CL blocks (alpha and gamma series) affect the mechanical properties as well as cell proliferation and particularly cell alignment. Cell directionality tests are presented demonstrating that several LCE scaffolds show cell attachment, proliferation, narrow orientational dispersion of cells, and highly anisotropic cell growth on the as‐synthesized LCE materials.

     

Liquid Crystal Elastomer Actuators from Anisotropic Porous Polymer Template

Controlling self‐assembly behaviors of liquid crystals is a fundamental issue for designing them as intelligent actuators. Here, anisotropic porous polyvinylidene fluoride film is utilized as a template to induce homogeneous alignment of liquid crystals. The mechanism of liquid crystal alignment induced by anisotropic porous polyvinylidene fluoride film is illustrated based on the relationship between the alignment behavior of liquid crystals and surface microstructure of anisotropic polyvinylidene fluoride film. Liquid crystal elastomer actuators with fast responsiveness, large strain change, and reversible actuation behaviors are achieved by the photopolymerization of liquid crystal monomer in liquid crystal cells coated with anisotropic porous films.

     

Physical Models from Physical Templates Using Biocompatible Liquid Crystal Elastomers as Morphologically Programmable Inks For 3D Printing

Advanced manufacturing has received considerable attention as a tool for the fabrication of cell scaffolds however, finding ideal biocompatible and biodegradable materials that fit the correct parameters for 3D printing and guide cells to align remain a challenge. Herein, a photocrosslinkable smectic-A (Sm-A) liquid crystal elastomer (LCE) designed for 3D printing is presented, that promotes cell proliferation but most importantly induces cell anisotropy. The LCE-based bio-ink allows the 3D duplication of a highly complex brain structure generated from an animal model. Vascular tissue models are generated from fluorescently stained mouse tissue spatially imaged using confocal microscopy and subsequently processed to create a digital 3D model suitable for printing. The 3D structure is reproduced using a Digital Light Processing (DLP) stereolithography (SLA) desktop 3D printer. Synchrotron Small-Angle X-ray Diffraction (SAXD) data reveal a strong alignment of the LCE layering within the struts of the printed 3D scaffold. The resultant anisotropy of the LCE struts is then shown to direct cell growth. This study offers a simple approach to produce model tissues built within hours that promote cellular alignment.     

Functionalized Synthetic Biodegradable Polymer Scaffolds for Tissue Engineering

Scaffolds (artificial ECMs) play a pivotal role in the process of regenerating tissues in 3D. Biodegradable synthetic polymers are the most widely used scaffolding materials. However, synthetic polymers usually lack the biological cues found in the natural extracellular matrix. Significant efforts have been made to synthesize biodegradable polymers with functional groups that are used to couple bioactive agents. Presenting bioactive agents on scaffolding surfaces is the most efficient way to elicit desired cell/material interactions. This paper reviews recent advancements in the development of functionalized biodegradable polymer scaffolds for tissue engineering, emphasizing the syntheses of functional biodegradable polymers, and surface modification of polymeric scaffolds.

     

Monitoring H2O2 on the Surface of Single Cells with Liquid Crystal Elastomer Microspheres

Live‐imaging of signaling molecules released from living cells is a fundamental challenge in life sciences. Herein, we synthesized liquid crystal elastomer microspheres functionalized with horse‐radish peroxidase (LCEM‐HRP), which can be immobilized directly on the cell membrane to monitor real‐time release of H₂O₂ at the single‐cell level. LCEM‐HRP could report H₂O₂ through a concentric‐to‐radial (C‐R) transfiguration, which is due to the deprotonation of LCEM‐HRP and the break of inter or intra‐chain hydrogen bonding in LCEM‐HRP caused by HRP‐catalyzed reduction of H₂O₂. The level of transfiguration of LCEM‐HRP revealed the different amounts of H₂O₂ released from cells. The estimated detection sensitivity was ≈2.2×10^?7 μm for 10 min of detection time. The cell lines and cell–cell heterogeneity was explored from different configurations. LCEM‐HRP presents a new approach for in situ real‐time imaging of H₂O₂ release from living cells and can be the basis for seeking more advanced chemical probes for imaging of various signaling molecules in the cellular microenvironment.     

Nematic Liquid Crystalline Elastomer Grating and Microwire Fabricated by Micro‐Molding in Capillaries

A new approach is developed to fabricate highly oriented mono‐domain LCE nano/microstructures through micro‐molding in capillaries. Gratings and microwires as two typical examples are fabricated and characterized by polarizing optical microscopy, optical microscopy, and scanning electron microscopy. The gratings with precisely controlled sizes and smooth surface are obtained by filling the channels with a nematic monomer mixture followed by the photo‐crosslinking. After peeling off the gratings from the substrate, the free‐standing microwires are obtained. A uniform orientation of the mesogenic units is observed for the molds with channel width less than 20 μm. Reversible thermomechanical effect is demonstrated by using the microwires obtained through this approach.     

A Versatile Preparation Route for Thin Free‐Standing Liquid Single Crystal Elastomers

Summary: Thin films of nematic and cholesteric side‐chain polymers containing reactive benzophenone units can be macroscopically oriented by electric/magnetic fields or surface interactions. After UV‐irradiation, liquid single crystal elastomers (LSCEs) are formed. With this simple, new pathway, macroscopically ordered free‐standing LSCE films are easily accessible having a thickness in the range of about 100 nm to 100 μm as outlined in Figure.

     

A Novel Side-Chain Liquid Crystal Elastomer Exhibiting Anomalous Reversible Shape Change

Liquid crystalline elastomers (LCEs) have been actively investigated as stimuli-controlled actuators and soft robots. The basis of these applications is the ability of LCEs to undergo a reversible shape change upon a liquid crystalline (LC)-isotropic phase transition. Herein, we report the synthesis of a novel LCE based on a side-chain liquid crystalline polymer (SCLCP). In contrast to known LCEs, this LCE exhibits a striking anomalous shape change. Subjecting a mechanically stretched monodomain strip to LC-disorder phase transition, both the length and width of the strip contract in isotropic phase, and both elongate in LC phase. This thermally induced behaviour is the result of a subtle interplay between the relaxation of polymer main chain oriented along the stretching direction and the disordering of side-group mesogens oriented perpendicularly to the stretching direction. This finding points out potential design of LCEs of this peculiar type and possible applications to exploit.     

A New Type of Macroscopically Oriented Smectic‐A Liquid Crystal Elastomer

Smectic‐A liquid single crystal elastomers (S_A‐LSCE) are materials where the rubber elasticity of the polymer network is combined with the one‐dimensional positional long‐range order of mesogenic groups which are covalently attached to the network. In the systems investigated so far, a mechanical deformation of the network causes significant reorientation processes of the layered structure. We present a new type of S_A‐LSCE in which this structure remains unaffected on mechanical deformation both parallel and perpendicular to the director. The thermoelastic behavior, macroscopic dimensions, and stress–strain measurements parallel as well as perpendicular to the director are investigated. X‐ray studies confirm that a deformation parallel and perpendicular to the layer normal does not alter the macroscopically ordered lamellar structure with respect to the order parameter and the layer correlation length. We propose a simple picture where defects within the lamellar structure might account for these findings.

     

新型对称联苯双酯类液晶材料的合成和晶体结构

设计并合成了4个对称联苯双酯类液晶化合物,化合物结构通过红外和核磁表征,它们的介晶性通过差示扫描量热仪(DSC),X射线衍射仪(XRD)和热台偏光显微镜(POM)进行了研究.并测定了4,4'-3,3',5,5'-四甲基联苯-二(4-甲基苯甲酸酯)(Ⅲa)的单晶结构,结果显示:晶体属于单斜晶系,P21/c空间群,晶胞参数为a=18.525(3)(A),b=12.196(2)(A),c=12.195(2)(A),β=97.142(2)°,V=2733.7(9)(A)3,Z=4,Dc=1.163 Mg/m3,R=0.0521,Rw=0.1161.化合物均为热致型互变液晶,并讨论了氧原子、不饱和端基和端基链长对介晶性的影响.     

Spatial Patterning of Fluorescent Liquid Crystal Ink Based on Inkjet Printing

Fluorescent cholesteric liquid crystal materials (FCLC) with aggregation-induced emission (AIE) properties can effectively solve the contradiction between aggregation-induced quenching (ACQ) and liquid crystal self-assembly when light-emitting materials are aggregated, and they have great application value in the fields of anti-counterfeit detection and information hiding. However, generating a visually appealing design, logo, or image in the application typically requires an intricate fabrication process, such as the use of prefabricated molds and photomasks, which greatly limits the practical application of FCLC materials. Herein is reported a new method for spatially patterned liquid crystal (LC) microdroplet arrays using drop-on-demand inkjet printing technology. Through rational composition design, a spatial array composed of different liquid crystal microdroplets was established, and the array contains two entirely distinct but intact patterns at the same time, which can be reversibly switched under the irradiation of UV and natural light. This study provides a new method for the integrated preparation of different component liquid crystal materials.     

Covalent Attachment of Fibronectin onto Emulsion‐Templated Porous Polymer Scaffolds Enhances Human Endometrial Stromal Cell Adhesion,Infiltration, and Function

A novel strategy for the surface functionalization of emulsion‐templated highly porous (polyHIPE) materials as well as its application to in vitro 3D cell culture is presented. A heterobifunctional linker that consists of an amine‐reactive N‐hydroxysuccinimide ester and a photoactivatable nitrophenyl azide, N‐sulfosuccinimidyl‐6‐(4′‐azido‐2′‐nitrophenylamino)hexanoate (sulfo‐SANPAH), is utilized to functionalize polyHIPE surfaces. The ability to conjugate a range of compounds (6‐aminofluorescein, heptafluorobutylamine, poly(ethylene glycol) bis‐amine, and fibronectin) to the polyHIPE surface is demonstrated using fluorescence imaging, FTIR spectroscopy, and X‐ray photoelectron spectroscopy. Compared to other existing surface functionalization methods for polyHIPE materials, this approach is facile, efficient, versatile, and benign. It can also be used to attach biomolecules to polyHIPE surfaces including cell adhesion‐promoting extracellular matrix proteins. Cell culture experiments demonstrated that the fibronectin‐conjugated polyHIPE scaffolds improve the adhesion and function of primary human endometrial stromal cells. It is believed that this approach can be employed to produce the next generation of polyHIPE scaffolds with tailored surface functionality, enhancing their application in 3D cell culture and tissue engineering whilst broadening the scope of applications to a wider range of cell types.     

A Novel Side‐Chain Liquid Crystal Elastomer Exhibiting Anomalous Reversible Shape Change

Liquid crystalline elastomers (LCEs) have been actively investigated as stimuli‐controlled actuators and soft robots. The basis of these applications is the ability of LCEs to undergo a reversible shape change upon a liquid crystalline (LC)‐isotropic phase transition. Herein, we report the synthesis of a novel LCE based on a side‐chain liquid crystalline polymer (SCLCP). In contrast to known LCEs, this LCE exhibits a striking anomalous shape change. Subjecting a mechanically stretched monodomain strip to LC‐disorder phase transition, both the length and width of the strip contract in isotropic phase, and both elongate in LC phase. This thermally induced behaviour is the result of a subtle interplay between the relaxation of polymer main chain oriented along the stretching direction and the disordering of side‐group mesogens oriented perpendicularly to the stretching direction. This finding points out potential design of LCEs of this peculiar type and possible applications to exploit.     

A Multifunctional Dye‐doped Liquid Crystal Polymer Actuator: Light‐Guided Transportation,Turning in Locomotion,and Autonomous Motion

A strip of a liquid crystal elastomer doped with a near‐infrared dye with one side crosslinked monodomain and the other crosslinked polydomain along the thickness behaves like a multifunctional photoactuator without the need for a support. A flat strip with two ends fixed on substrate surface forms a moving bump under laser scanning, which can be used as light‐fueled conveyor to transport an object. Cutting off and laser scanning the bump with two free ends makes a soft and flexible millimeter‐scale crawler that can not only move straight and climb an inclined surface, but also undergo light‐guided turning to right or left as a result of combined out‐of‐plane and in‐plane actuation. Based on the self‐shadowing mechanism, with one end of the strip fixed on substrate surface, it can execute a variety of autonomous arm‐like movements under constant laser illumination, such as bending–unbending and twisting, depending on the laser incident angles with respect to the strip actuator.     

Flexo-Ionic Effect of Ionic Liquid Crystal Elastomers

The first study of the flexo-ionic effect, i.e., mechanical deformation-induced electric signal, of the recently discovered ionic liquid crystal elastomers (iLCEs) is reported. The measured flexo-ionic coefficients were found to strongly depend on the director alignment of the iLCE films and can be over 200 µC/m. This value is orders of magnitude higher than the flexo-electric coefficient found in insulating liquid crystals and is comparable to the well-developed ionic polymers (iEAPs). The shortest response times, i.e., the largest bandwidth of the flexo-ionic responses, is achieved in planar alignment, when the director is uniformly parallel to the substrates. These results render high potential for iLCE-based devices for applications in sensors and wearable micropower generators.     

Alcohol Selective Optical Sensor Based on Porous Cholesteric Liquid Crystal Polymer Networks

A responsive hydrogen-bonded cholesteric liquid crystal polymer (CLCP) film with controlled porosity was fabricated as an optical sensor to distinguish between methanol and ethanol in alcohol solutions. To facilitate responding the alcohols, porosity was generated by removing the nonreactive liquid crystal agent, and the hydrogen bridges of CLCP were broken. The sensitivities of CLCPs to ethanol and methanol were obtained by monitoring the wavelength shifts of the transmission spectrum at different alcohol concentrations and ratios of methanol/ethanol. Changes in the central wavelength of the CLCP network transmission spectrum allowed the methanol–ethanol ratio to be discriminated. A linear relationship between wavelength shift of CLCP networks and alcohol concentration was obtained experimentally, and the sensor characteristics were explored. The sensitivities of the CLCPs were 1.35 and 0.18 nm/% to ethanol and methanol, respectively. The sensing sensitivity of cholesteric networks to alcohol molecules increased as the methanol–ethanol ratio declined. Therefore, CLCP could act as a stimuli-responsive material to distinguish the concentrations of acetone and ethanol in mixed solutions. Furthermore, the impact of UV intensity for curing a CLC mixture on the sensing sensitivity to the different alcohol concentrations was also studied. The higher UV intensity could enhance the sensitivity to alcohol molecules and distinguishing ability between methanol and ethanol.