Diiodobis(2‐hydroxymethyl‐1‐methyl‐1‐imidazole‐N3)cadmium(II)

The Cd atom in Cd(Hmmi)₂I₂ is five‐coordinate with a trigonal bipyramidal geometry in which the apical sites are occupied by I and O atoms. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of Substituted 4‐Aroyl‐1‐indanone and 5‐Aroyl‐1‐tetralone

Several substituted 4‐aroyl‐1‐indanones 2 and 5‐aroyl‐1‐tetralones 3 were prepared in good yields from 1‐indanones 1 via a series of reasonable transformations.     

One‐pot green synthesis of Cu/bone nanocomposite and its catalytic activity in the synthesis of 1‐substituted 1H‐1,2,3,4‐tetrazoles and reduction of hazardous pollutants

In this work, a simple and green method is reported for the biosynthesis of Cu/bone nanocomposite using Cordyline fruticosa extract as a stabilizer and reductant. Animal bone was used as a natural support to prevent the accumulation of Cu nanoparticles. The catalytic activity of Cu/bone nanocomposite was assessed in the synthesis of 1‐substituted 1H‐1,2,3,4‐tetrazoles and reduction of various organic dyes, including 4‐nitrophenol (4‐NP), nigrosin (NS), congo red (CR) and methylene blue (MB). The best catalytic performance in the synthesis of 1‐substituted tetrazoles was achieved using 0.05 g of Cu/bone nanocomposite at 120°C. In addition, under optimal conditions, the absorption bands corresponding to 4‐NP, CR, NS and MB completely disappeared after about 6 min, 3 min, 50 s and 7 s, respectively. The biosynthesis protocol used in the preparation of Cu/bone nanocomposite offers a very attractive area for further research.     

µ2‐Diiodotetrakis(2‐hydroxymethyl‐1‐methyl‐1‐imidazole‐N3)dicadmium(II) bis[triiodo(2‐hydroxymethyl‐1‐methyl‐1‐imidazole‐N3)cadmate(II)] dihydrate

There are two types of Cd in the title compound, the six‐coordinated Cd atom in the cation is in a distorted octahedral geometry while the four‐coordinated Cd in the anion shows a distorted tetrahedral geometry. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of 2‐Substituted 3‐Alkylidene‐2,3‐dihydro‐1H‐isoindol‐1‐imines through Cyclization of [1‐(2‐Cyanophenyl)alkylidene]aminide Intermediates Generated from the Reaction of 2‐(1‐Azidoalkyl)benzonitriles with NaH

A convenient sequence for the preparation of 3‐alkylidene‐2,3‐dihydro‐1H‐isoindol‐1‐imine derivatives 6 has been developed. Thus, 2‐(1‐azidoalkyl)benzonitriles 2 , readily accessible from 2‐alkylbenzonitriles, are allowed to react with NaH in DMF at 0° to room temperature to generate [1‐(2‐cyanophenyl)alkylidene]aminide intermediates 3 , of which cyclization and the subsequent rearrangement, followed by alkylation with alkyl halides, affords 2‐substituted 1‐alkylidene‐2,3‐dihydro‐1H‐isoindol‐2‐imines 6 in generally moderate yields.     

Synthesis of 4‐Arylisocoumarins (=4‐Aryl‐1H‐2‐benzopyran‐1‐ones) through Acidic Hydrolysis of (Z)‐2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes,Followed by Oxidation

4‐Arylisocoumarins (=4‐aryl‐1H‐2‐benzopyran‐1‐ones) 6 were prepared from 2‐(1‐aryl‐2‐methoxyethenyl)‐1‐bromobenzenes 1 . Successive treatment of these bromo styrenes with BuLi and 1‐formylpiperidine gave a mixture of (E)‐ and (Z)‐2‐(1‐aryl‐2‐methoxyethenyl)benzaldehydes 2 . Hydrolysis of (Z)‐isomers with conc. HBr, followed by pyridinium chlorochromate (PCC) oxidation of the resulting 1H‐2‐benzopyran‐1‐ol derivatives 4 (and 5 ), afforded the desired products.     

Trans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane/HBr System as New,Effective, Mild and Non‐toxic Reagent for Synthesis of 2‐Aryl‐1H‐benzothiazoles and 2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles

Ttrans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane has been used as new, effective, solid, inexpensive and nontoxic oxidant for in situ generation of Br⁺ from HBr. This system has been applied as catalyst for synthesis of 2‐aryl‐1H‐benzothiazoles and 2‐aryl‐1‐arylmethyl‐1H‐benzimidazoles at room temperature in excellent yields and high purity.     

A Novel Conversion of 2, 4‐Diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepines into 2, 4‐Diaryl‐3 H‐1, 5‐benzodiazepines

A novel conversion of 2, 4‐diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepins into 2, 4‐diaryl‐3 H‐1, 5‐benzodiazepines by the reaction with m‐chloroperbenzoic acid (MCPBA) was reported.     

Synthesis of Optically Active 1‐(1‐Phenylethyl)‐1H‐imidazoles Derived from 1‐Phenylethylamine

The three‐component reaction of (R)‐ or (S)‐1‐phenylethylamine ( 6 ), formaldehyde, and an α‐(hydroxyimino) ketone 5 , i.e., 3‐(hydroxyimino)butan‐2‐one ( 5a ) or 2‐(hydroxyimino)‐1,2‐diphenylethanone ( 5b ), yields the corresponding enantiomerically pure 1‐(1‐phenylethyl)‐1H‐imidazole 3‐oxide 7 in high yield (Schemes 2 and 3). The reactions are carried out either in MeOH or in AcOH. Smooth transformations of the N‐oxides into optically active 1‐(1‐phenylethyl)‐1H‐imidazoles 10 and 2,3‐dihydro‐1‐(1‐phenylethyl)‐1H‐imidazole‐2‐thiones 11 are achieved by treatment of 7 with Raney‐Ni and 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 12 ), respectively (Scheme 4).     

Palladium‐catalyzed carbonylative cyclization of 1‐bromoallyl bromides with anilines leading to 1‐aryl‐1H‐pyrrol‐2(5H)‐ones

1‐Bromoallyl bromides are carbonylatively cyclized with anilines under carbon monoxide pressure in DMF in the presence of a catalytic amount of a palladium catalyst along with a base to give the corresponding 1‐aryl‐1H‐pyrrol‐2(5H)‐ones in moderate to good yield. Copyright © 2012 John Wiley & Sons, Ltd.     

Photoannelation Reactions of 3‐(Alk‐1‐ynyl)cyclohept‐2‐en‐1‐ones

Irradiation (350 nm) of the newly synthesized 3‐(alk‐1‐ynyl)cyclohept‐2‐en‐1‐ones 1 and 2 leads to the selective formation of tricyclic head‐to‐head dimers. In the presence of 2,3‐dimethylbuta‐1,3‐diene, the (monocyclic) enone 1 affords trans‐fused 7‐alkynyl‐bicyclo[5.2.0]nonan‐2‐ones as major photoproducts, whereas photocycloaddition of benzocyclohept‐5‐en‐7‐one 2 to the same diene gives preferentially the eight‐membered cyclic allene 16 via ‘end‐to‐end’ cyclization of the intermediate allyl‐propargyl biradical 22 . On contact with acid, cycloocta‐1,2,5‐triene 16 isomerizes to cycloocta‐1,3,5‐triene 18 .     

Hydriodic Acid‐Mediated Cyclization of α‐Substituted Secondary 2‐Ethenylbenzamides: Synthesis of 2‐Substituted 2,3‐Dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones and 3,3‐Disubstituted (E)‐1‐(Arylimino)‐1,3‐dihydroisobenzofurans

A new and facile method for the preparation of 2‐substituted 2,3‐dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones 3 and 3,3‐disubstituted (E)‐1‐(arylimino)‐1,3‐dihydroisobenzofurans 6 has been developed. Thus, treatment of N‐alkyl(or aryl)‐2‐(1‐methylethen‐1‐yl)benzamides 2 with concentrated hydriodic acid (HI) in MeCN at room temperature afforded 3 . Similar treatment of N‐aryl‐2‐(1‐phenylethen‐1‐yl)benzamide 5 with concentrated HI at 0° afforded 6 .     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

A novel 4‐methylene‐3‐borahomoadamantane: 1,1‐organoboration of an alkyn‐1‐ylsilane using 1‐boraadamantane

1,1‐Dibromo‐2,2‐bis(trimethylsilylethynyl)ethene ( 2 ) reacts with two equivalents of 1‐boraadamantane ( 1 ) by 1,1‐organoboration of both trimethylsilylethynyl groups to give a triene 3 bearing two 4‐methylene‐3‐borahomoadamantane moieties in terminal positions. The triene was characterized by one‐ and two‐dimensional ¹H, ¹¹B, ¹³C and ²⁹Si NMR spectroscopy in solution and X‐ray structural analysis in the solid state. The planes of the C double bond are strongly twisted against each other as a result of the bulky substituents, and the surroundings of the boron atoms deviate from the ideal trigonal planar geometry owing to the tension in the tricyclic frameworks. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of 3‐Aryl‐2‐methoxyinden‐1‐one (Z)‐Phenylhydrazones via Hydrobromic Acid‐Mediated Cyclization of 2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehyde Phenylhydrazones

2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes 2 , obtained by successive treatment of 1‐(1‐aryl‐2‐methoxyethenyl)‐2‐bromobenzenes 1 with BuLi and 1‐formylpiperidine, were transformed to the corresponding phenylhydrazones 3 on treatment with PhNHNH₂. When these hydrazones were allowed to react with conc. HBr, cyclization, followed by dehydrogenation with air occurred, furnished 3‐aryl‐2‐methoxyinden‐1‐one (Z)‐phenylhydrazones 4 .     

Two‐Step Synthesis of 1,3‐Disubstituted 3,4‐Dihydro‐4‐thioxoquinazolin‐2(1H)‐ones from 1‐Bromo‐2‐fluorobenzenes

An efficient synthesis of 3‐alkyl‐3,4‐dihydro‐4‐thioxobenzoquinazolin‐2(1H)‐ones 3 has been accomplished in two steps and in satisfactory yields from 1‐bromo‐2‐fluorobenzenes 1 . Thus, the reaction of 1‐fluoro‐2‐lithiobenzenes, generated by the Br/Li exchange between 1 and BuLi, with alkyl isothiocyanates, gives N‐alkyl‐2‐fluorobenzothioamides 2 , which, in turn, react with a series of isocyanates in the presence of NaH to give the desired products 3 .     

1JCC‐edited HSQC‐1,n‐ADEQUATE: a new paradigm for simultaneous direct and long‐range carbon–carbon correlation

Establishing the carbon skeleton of a molecule greatly facilitates the process of structure elucidation, leaving only heteroatoms to be inserted, heterocyclic rings to be closed, and stereochemical features to be defined. INADEQUATE, and more recently PANACEA, have been the only means of coming close to the goal of totally defining the carbon skeleton of a molecule. Unfortunately, the extremely low sensitivity and prodigious sample requirements of these experiments and the multiple receiver requirement for the latter experiment have severely restricted the usage of these experiments. Proton‐detected ADEQUATE experiments, in contrast, have considerably higher sensitivity and more modest sample requirements. By combining experiments such as 1,1‐ADEQUATE and 1,n‐ADEQUATE with higher sensitivity experiments such as GHSQC through covariance processing, sample requirements can be further reduced with a commensurate improvement in the s/n ratio and F₁ resolution of the covariance processed spectrum. We now wish to report the covariance processing of an inverted ¹J_CC 1,n‐ADEQUATE experiment with a non‐edited GHSQC spectrum to afford a spectrum that can trace the carbon skeleton of a molecule with the exception of correlations between quaternary carbons. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

A new one‐dimensional ZnII coordination polymer based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate

Multidentate N‐heterocyclic compounds form a variety of metal complexes with many intriguing structures and interesting properties. The title coordination polymer, catena‐poly[zinc(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N³:N^3′;N^3′:N³‐zinc(II)‐bis(μ‐benzene‐1,2‐dicarboxylato)‐κ²O¹:O²;κ³O¹,O^1′:O²], [Zn₂(C₈H₄O₄)₂(C₁₁H₁₀N₄)₂]_n, has been synthesized by the reaction of Zn(NO₃)₂ with 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) and benzene‐1,2‐dicarboxylic acid (H₂bdic) under hydrothermal conditions. There are two crystallographically distinct imb ligands [imb(A) and imb(B)] in the structure which adopt very similar coordination geometries. The imb(A) ligand bridges two symmetry‐related Zn1 ions, yielding a binuclear [(Zn1)₂{imb(A)}₂] unit, and the imb(B) ligand bridges two symmetry‐related Zn2 ions resulting in a binuclear [(Zn2)₂{imb(B)}₂] unit. The above‐mentioned binuclear units are further connected alternately by pairs of bridging bdic²⁻ ligands, forming an infinite one‐dimensional chain. These one‐dimensional chains are further connected through N—H...O hydrogen bonds, leading to a two‐dimensional layered structure. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.