Determination of epoxides by high-performance liquid chromatography following derivatization with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethyldithiocarbamate

A reversed-phase, high-performance liquid chromatography (RP-HPLC) method that allows quantitation of low levels of epoxides has been described. The method involved derivatization of epoxides using 100- to 1,000-fold excess N,N-diethyldithiocarbamate (DTC) at 60 °C for 20 min at neutral pH. The unreacted DTC was then decomposed to CS₂ and diethyl amine by acidification of the reaction mixture to pH 2 using orthophosphoric acid. The first two steps could be performed in the same reaction vessel by sequential addition of reagents. In the final step, an aliquot (20 μL) of the derivatized sample was analyzed for the presence of stable esters of DTC by RP-HPLC using a Supelcosil LC-18-S (150 × 4.6-mm) column and a mobile phase consisting of 40% (v/v) acetonitrile in water at a flow of 1 mL min⁻¹. Using UV detection at 278 nm, the epoxides gave linear responses in the concentration range of 0.25 to 50 μM. The method is robust, and as low as 5 pmol of the analyte could be successfully detected and quantified with recoveries of ≥94%. Following a minimal pretreatment such as ultrafiltration (molecular weight cutoff 5,000 Da), the method is suitable for analysis of epoxides in complex physiological fluids (e.g., fetal bovine serum). The method has been rigorously evaluated and adapted in our laboratory for routine analysis and determination of stability of epoxides of 1,3-butadiene and other alkenes added to cell cultures.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Thiocyanation of <Emphasis Type="Italic">N</Emphasis>-arylsulfonyl-, <Emphasis Type="Italic">N</Emphasis>-aroyl-, and <Emphasis Type="Italic">N</Emphasis>-[(<Emphasis Type="Italic">N</Emphasis>-arylsulfonyl)benzimidoyl]-1,4-benzoquinone imines

Reactions of thiocyanate ion with N-aroyl-, N-arylsulfonyl-, and N-(N-arylsulfonylbenzimidoyl)-1,4-benzoquinone imines follow the 1,4-addition pattern, and the adducts undergo intramolecular cyclization to give the corresponding N-substituted 5-amino-1,3-benzoxathiol-2-ones as final products.     

Pathways of decomposition of <Emphasis Type="Italic">N</Emphasis>-cyclopropyl <Emphasis Type="Italic">N</Emphasis> nitrosoureas in methanol

Decomposition of a series of N-cyclopropyl-N-nitrosoureas (CNU) in CD₃OD was studied. These decompose much more rapidly than N-methyl-N-nitrosourea, one of the decomposition pathways being denitrosation, which is atypical of alkylnitrosoureas under the reaction conditions used. The nature of substituents in the cyclopropane ring has a great effect on the stability of CNU and the product ratio. In the presence of H₂ SO₄, decomposition occurs much more rapidly. Possible pathways of the formation of the major decomposition products of CNU are proposed based on the experimental data.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 359–370, February, 2005.     

Cheap thiamine hydrochloride as efficient catalyst for synthesis of 4<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">b</Emphasis>]pyrans in aqueous ethanol

Preparation of pharmaceutically active 2-amino-4H-pyran derivatives has been achieved using cheap thiamine hydrochloride as catalyst. A wide range of aromatic aldehydes easily undergo condensation with malononitrile and several kinds of 1,3-cyclohexanedione under mild condition to afford the desired product with good purity in excellent yield. This protocol has various advantages as a simple, clean, and environmentally benign three-component process.     

Synthesis and thiocyanation of <Emphasis Type="Italic">N</Emphasis>-alkyl(trifluoromethyl)sulfonyl 1,4-benzoquinone monoimines

New N-alkyl(trifluoromethyl)sulfonyl 1,4-benzoquinone monoimines were synthesized, and their thiocyanation gave 5-alkyl(trifluoromethyl)sulfonylamino-1,3-benzoxathiol-2-ones. An intermediate thiocyanation product, 5-trifluoromethylsulfonylamino-1,3-benzoxathiol-2-imine, was isolated for the first time.     

Grafting of poly-<Emphasis Type="Italic">N</Emphasis>-methacryloylaminodeoxyglucose on poly-<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

A graft copolymer simulating glycoprotein was prepared by reaction of poly-N-methacryloylaminodeoxyglucose containing terminal amino group with a copolymer of N-vinylpyrrolidone and acrylic acid N-hydroxysuccinimide ester.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1356–1359.Original Russian Text Copyright © 2004 by Nazarova, Pavlov, Kever, Afanaseva, Panarin.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Mechanochemical synthesis of <Emphasis Type="Italic">N</Emphasis>-triethylborazine

Reactions of ethylamine hydrochloride C₂H₅NH₂HCl with MBH₄ (M = Li, Na, K) under mechanical activation of mixtures of crystalline substances in a vacuum vibratory ball mill are studied. The step-by-step pyrolysis of the reaction products at 90 and 240°C is found to yield N-triethylborazine. The maximum yields of N-triethylborazine are 78.9, 60.3, and 73.8% for LiBH₄, NaBH₄, and KBH₄, respectively. The target product is characterized by various physicochemical methods. The melting point, density, refractive index, and other properties correspond to the literature data for N-triethylborazine.     

A cautionary note on thermal runaway reactions in mixtures of 1-alkyl-3-methylimidazolium ionic liquids and <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

N-Methylmorpholine-N-oxide (NMMO) cannot be completely separated by extraction from mixtures with common 1,3-dialkylimidazolium ionic liquids (ILs) due to strong ionic interactions between the two components. At elevated temperatures, above approx. 90 °C, especially under dry conditions and in the presence of acid, alkylating or acylating agents, remaining NMMO in ILs tends to undergo autocatalytic degradation. This is a highly exothermic, unstoppable process that results in explosions, flames, and complete charring of the reaction mixtures. Thus, caution must be exercised when drying or heating ILs that were in previous contact with NMMO, and the absence of amine oxide must be confirmed to avoid potential danger.     

Synthesis of 1,3-benzothiazol-2(3<Emphasis Type="Italic">H</Emphasis>)-one and some its derivatives

Acylation of 2-aminobenzenethiol with methyl chloroformate in pyridine gave dimethyl 2,2′-disulfanediylbis(2,1-phenylene)dicarbamate instead of expected methyl 2-suylfanylphenylcarbamate. Heating of the product with zinc dust in glacial acetic acid led to the formation of 1,3-benzothiazol-2(3H)-one. Alkylation of the latter with 1,2-dibromoethane and allyl bromide, as well as acylation with chloroacetyl chloride, afforded the corresponding 3-substituted derivatives. 3-[3-(Pyridin-2-yl)-4,5-dihydroisoxazol-5-ylmethyl]-1,3-benzothiazol-2(3H)-one was synthesized with high regioselectivity by 1,3-dipolar cycloaddition of 3-allyl-1,3-benzothiazol-2(3H)-one to pyridine-2-carbonitrile oxide generated fromN-hydroxypyridine-2-carboximidoyl chloride hydrochloride by the action of triethylamine.     

Solvent extraction of some trace metals and iron with <Emphasis Type="Italic">N</Emphasis>-Octyl-<Emphasis Type="Italic">N,N</Emphasis>-bis(dihexylphosphinylmethyl)amine

The processes were studied of the solvent extraction of the ions of triply-charged trace elements including scandium, indium, gallium, and yttrium, as well as iron, with N-octyl-N,N-bis(dihexylphosphinylmethyl) amine solution in toluene, chloroform or methylene chloride from hydrochloric, nitric or perchloric acids aqueous solutions. The metals extraction dependence on the acid concentration showed that the best results were reached using perchloric acid. The calculation of partition coefficients of metals allowed us to reveal a high selectivity of the scandium extraction. The prospects of using the investigated bisphosphinylamine in the technology of extraction, concentration and separation of the trace metals ions was concluded.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-Allyl- and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Diallyltrifluoromethanesulfonamides with Carboxylic Acid Amides under Oxidizing Conditions

Reactions of acetamide and benzamide with N-allyltrifluoromethanesulfonamide in the presence of t-BuOCl–NaI afforded exclusively 2,5-bis(chloromethyl)-1,4-bis(trifluoromethanesulfonyl)piperazine. Analogous reaction with N,N-diallyltrifluoromethanesulfonamide gave mixed halogenation product at only one C=C double bond of the substrate.     

Palladium-catalyzed allylic substitution assisted by 1,3,2-diazaphospholidine derivatives of (<Emphasis Type="Italic">R,R</Emphasis>)-<Emphasis Type="Italic">N</Emphasis>-naphthyltartarimide

P,P-Bidentate diamidophosphite ligands containing the (3R,4R)-3,4-dioxy-1-(1-naphthyl)pyrrolidine-2,5-dione framework and 1,3,2-diazaphospholidine rings with the stereogenic P atoms were obtained. The use of these ligands provides up to 85% ee in Pd-catalyzed asymmetric amination of (E)-1,3-diphenylallyl acetate and up to 95% ee in its asymmetric alkylation with dimethyl malonate.     

Reactions of 1-nitrocyclohexene with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-binucleophiles

A modification of 1-nitrocyclohexene synthesis is proposed; its reaction with phenylhydrazine and benzoic acid hydrazide is shown to afford monoadducts, and with hydrazine hydrate, bisaduct. With diphenylguanidine occurs heterocyclization to 1-phenyl-2-N-phenylamino-4,5,6,7-tetrahydrobenzimidazole, whose structure is confirmed by the X-ray diffraction data. The analysis performed for this compound of the electron density distribution function in the crystal made it possible to estimate the charge distribution, π-electrons delocalization nature, and the role of N-H…N, C-H…H-C and C-H…C interactions in the formation of the crystal packing.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

C-amidoalkylation of pyrroles with <Emphasis Type="Italic">N</Emphasis>-trifluoromethylsulfonyl and <Emphasis Type="Italic">N</Emphasis>-arylsulfonyl polychloroaldehyde imines

N-(Trifluoromethylsulfonyl) and N-arylsulfonyl polychloroacetaldehyde imines reacted with pyrrole, 1-alkyl-, 1-benzyl-, and 1-(4-nitrophenyl)-substituted pyrroles, and bis-pyrroles to give the corresponding 2-[1-(sulfonylamino)polychloroethyl]-1H-pyrroles or mixtures of 2- and 3-[1-(sulfonylamino)polychloroethyl]-1H-pyrroles, depending on the nature of the Schiff base and substituent on the pyrrole nitrogen atom and reaction conditions. The first synthesis of 2,5-disubstituted NH-pyrrole by reaction of pyrrole with Schiff bases was described.     

Synthesis of <Emphasis Type="Italic">N,N</Emphasis>-disubstituted (<Emphasis Type="Italic">Z</Emphasis>)-<Emphasis Type="Italic">O</Emphasis>-methylnicotinamide oximes

A number of (Z)-N,N-dialkyl- and (Z)-N-acyl-N-alkyl-O-methylnicotinamide oximes was synthesized. Their configuration was confirmed by the NOESY experiment. Evaluation of fungicidal activity of compounds obtained was performed.     

Synthesis of 4,<Emphasis Type="Italic">N</Emphasis>-diaryl-2-methyl-5-oxo-1,4,5,6,7,8-hexahydroquinoline-3-carboxamides

Cyclohexane-1,3-dione reacted with substituted benzaldehydes and N-arylacetoacetamides in the presence of ammonium acetate under solvent-free conditions (150–160°C, 10–20 min) to give the corresponding 4,N-diaryl-2-methyl-5-oxo-1,4,5,6,7,8-hexahydroquinoline-3-carboxamides. The product structure was determined by IR and ¹H NMR spectroscopy and mass spectrometry.     

Methods for microencapsulation of <Emphasis Type="Italic">N</Emphasis>-benzylmorpholine

Microencapsulation of N-benzylmorpholine and its water-soluble derivative, N-benzylmorpholine hydrochloride, by simple and complex coacervation was studied, and the main steps of the processes were worked through.