Aqueous Two‐Phase System (ATPS) Containing Gemini (12‐3‐12,2Br−) and SDS I: Phase Diagram and Properties of ATPS

Two phases coexist in an aqueous system that contains the two surfactants cationic gemini 12‐3‐12,2Br? and anionic SDS. An aqueous two‐phase system (ATPS) is formed in a narrow region of the ternary phase diagram different from that of traditional aqueous cationic‐anionic surfactant systems. In that region, the molar ratio of gemini to SDS varies with the total concentration of surfactants. ATPS not only has higher stability but also has longer phase separation time for the new systems than that of the traditional system. Furthermore, the optical properties of ATPS are different at different total concentrations. All of these experimental observations can be attributed to the unique properties of gemini surfactant and the synergy between the cationic gemini surfactant and the anionic surfactant SDS.     

表面活性剂双水相的性质及其应用 Ⅰ. 表面活性剂双水相的微环境性质

阴、阳离子表面活性剂混合体系, 在一定浓度及混合比范围内, 可以形成两个互不相溶、平衡共存的水相, 称为表面活性剂双水相。其中阳离子表面活性剂过量的双水相体系, 称为阳离子双水相。本文分别以芘和罗丹明B作为探针, 用荧光探针法研究了摩尔比为1.6:1的C12NE和SDS混合体系成形成的阳离子双水相,测定其上层和下层的胶束微环境的极性和微粘度, 取得了有意义的结果。     

正负离子表面活性剂复配系统

正负离子表面活性剂复配系统,由于其带有相反电荷的离子头基间的强静电相互作用,具有强协同效应和高表面活性,在水溶液中可形成丰富的微观结构,表现出复杂的相行为。本文在相关研究的基础上,对于正负离子表面活性剂复配系统在表面（界面）性质,囊泡的制备及稳定性,虫状胶束的生成和性质,双水相系统的性质及其在萃取方面的应用,拟相分离模型、热力学胞腔模型、分子热力学模型及分子模拟等理论研究和作为模板合成纳米材料等方面的研究进展进行了综述。对于双水相系统的研究,指出了一些有待于进一步解决的问题。     

The effect of structure of oil phase, surfactant and co-surfactant on the physicochemical and electrochemical properties of bicontinuous microemulsion

Efforts were made to prepare bicontinuous microemulsions with ten different oil phases involving aliphatic, linear, and aromatic hydrocarbons as oil phases, two co-surfactants (n-butanol and n-pentanol) and two surfactants: cationic (CTAB) and anionic (SDS). Different weight percentages were employed for the preparation of cationic and anionic surfactant based microemulsions as reported in the literature. Out of the 40 compositions (10 oil phasesx2 co-surfactantsx2 surfactants) thus selected only 28 systems showed stable bicontinuous microemulsion phase. This behavior is explained on the basis of the structures of various constituents present in the microemulsions. Viscosity variations of stable bicontinuous microemulsions are found to depend mainly on the nature of co-surfactant. Conductivity behavior on the other hand depends mainly on the weight percentage and composition of aqueous phase. The solubility of pyrene in the oil phase determines the excimer formation and fluorescence behavior in microemulsions. The electron transfer property of both the water-soluble and the oil-soluble redox systems does not depend on the oil phase and the co-surfactant. The significance and importance of characterizing well defined bicontinuous microemulsions is thus highlighted.     

Competing reactions in anionic gel-poly(propylene imine) dendrimer-surfactant ternary systems

Competitive interactions in ternary systems including a lightly crosslinked polyanionic hydrogel, a protonated Astramol? poly(propylene imine) dendrimer (of first to fifth generation), and an ionic surfactant were studied. It was found that the direction of the substitution reactions in systems containing cationic surfactants depends on the length of the aliphatic radical in the surfactant molecule as well as on the dendrimer generation number. Depending on these parameters, the interpolyelectrolyte complex formed by the network polyanion and the cationic dendrimer is either capable or incapable of sorbing surfactant cations from aqueous solutions, thereby transforming into the network polyanion-cationic surfactant complex with the release of dendrimers to the surrounding solution. It was shown that the substitution reaction in systems containing anionic surfactants leads to the formation of a polyanionic gel reinforced by particles of the dendrimer-anionic surfactant complex.     

Mechanism of nitromethane liquid membrane oscillator containing sodium oleate

The oscillatory behavior of a liquid membrane oscillator with anionic surfactant was investigated in order to understand the oscillation mechanism at the molecular level. As a theoretical framework, an approach based on chemical kinetics laws has been used. The chosen system involved nitromethane with 2,2(')-bipyridine as liquid membrane. The aqueous donor phase contained sodium oleate and butanol, while sodium chloride was added to the aqueous acceptor phase. It was established that the oscillations take place exclusively at the aqueous acceptor phase/membrane interface. Therefore, liquid membrane oscillators with anionic surfactants behave the same way as oscillators with cationic surfactants as to the location of oscillations. An oscillation mechanism involving three stages is proposed and confirmed by numerical simulations. The oscillations of electrical potential differences between the two aqueous phases are produced by sudden adsorption and desorption of anionic surfactant in solvated form and butanol at the acceptor/membrane interface. The whole process is controlled by the slow diffusion of these species across the liquid membrane. The chaotic character of the oscillations was demonstrated by Lyapunov exponents obtained from the strange attractor of the system.     

Two routes to vesicle formation: metal-ligand complexation and ionic interactions

Two routes to vesicle formation were designed to prepare uni- and multilamellar vesicles in salt-free aqueous solutions of surfactants. The formation of a surfactant complex between a double-chain anionic surfactant with a divalent-metal ion as the counterion and a single-chain zwitterionic surfactant with the polar group of amine-oxide group is described for the first time as a powerful driving force for vesicle-phases constructed from salt-free mixtures of aqueous surfactant solutions. As a typical example, a Zn(2+)-induced charged complex fluid, vesicle-phase has been studied in aqueous mixtures of tetradecyldimethylamine oxide (C(14)DMAO) and zinc 2,2-dihydroperfluorooctanoate [Zn(OOCCH(2)C(6)F(13))(2)]. This ionically charged vesicle-phase formed due to surfactant complexation has interesting rheological properties and is not shielded by excess salts because there are no counterions in the solution. Such a vesicle-phase of surfactant complex is important for many applications; for example, the vesicle-phase was further used to produce in situ the vesicle-phase of the salt-free cationic/anionic (catanionic) surfactants, C(14)DMAOH(+)-(-)OOCCH(2)C(6)F(13). The salt-free catanionic vesicle-phase could be produced through injecting H(2)S gas into the C(14)DMAO/Zn(OOCCH(2)C(6)F(13))(2) vesicle-phase, because the zwitterionic surfactant C(14)DMAO can be charged by the H(+) released from H(2)S to become a cationic surfactant and Zn(2+) was precipitated as ZnS. After the ZnS precipitates were removed from C(14)DMAO/Zn(OOCCH(2)C(6)F(13))(2) solutions, the final mixed solution does not contain excess salts as do other cationic/anionic surfactant systems. Both the C(14)DMAO-Zn(OOCCH(2)C(6)F(13))(2) complex and the resulting catanionic C(14)DMAOH(+)-(-)OOCCH(2)C(6)F(13) solution are birefringent Lalpha-phase solutions that consist of uni- and multilamellar vesicles. Ring-shaped semiconductor ZnS materials with encapsulated ZnS precipitates and regular spherical ZnS particles were prepared, which resulted in a transition from vesicles composed of metal-ligand complexes to vesicles held together by ionic interactions in the salt-free aqueous systems. This strategy should provide a new method to prepare inorganic materials. The present routes to form vesicles solve a problem: how to prepare nanomaterials using surfactant self-assembly, with structure controlled not by the growing material, but by the phase behavior of the surfactants.     

Lysozyme in catanionic surfactant mixtures

We investigate the competition between the associations of oppositely charged protein-surfactant complexes and oppositely charged surfactant complexes. In all systems examined, the most favorable complexation is the one between the two oppositely charged surfactant ions, despite the strong binding known, for example, dodecyl sulfate, DS-, to lysozyme. Thus, the phase behavior of the catanionic system is dominating the features observed also in the presence of protein. The phase behavior of the dilute protein-free dodecyltrimethylammonium chloride-sodium dodecyl sulfate-water system is presented and used as a basis for the discussion on the different solubilization mechanisms. Our results show that the mechanism for resolubilization of a protein-surfactant salt is fundamentally different when it is caused by addition of a second surfactant than when it is accomplished by an excess of the first surfactant. The competition between lysozyme and cationic amphiphiles as hosts for the anionic surfactants was studied experimentally and analyzed quantitatively. Aggregates with C12 cationic surfactants are clearly preferred by the anionic surfactants, while for C10 and particularly C8 a clear excess of cationic surfactant has to be added to completely dissolve the complex salt lysozyme-anionic surfactant.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (1): Thermodynamic Study

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in aqueous solution were investigated by surface tension and ¹H NMR measurements. It was shown that the critical micelle concentration (cmc) increased linearly with the increase of β‐CD concentration. Furthermore, β‐CD formed 1∶1 inclusion complex with both cationic and anionic surfactants in the mixed surfactant systems, and no significant selective inclusion was observed. The thermodynamic parameters of the inclusion process of β‐CD to mixed cationic‐anionic surfactants were calculated by a numerical method based on the surface tension measurements, and it was found that the inclusion process was both enthalpy and entropy favorable.     

Threadlike micelle formation of anionic surfactants in aqueous solution

We have investigated the formation of threadlike micelles consisting of anionic surfactants and certain additives in aqueous solution. Threadlike micelles long enough to be entangled with each other were formed in a clear aqueous solution of two anionic surfactants, sodium hexadecyl sulfate and sodium tetradecyl sulfate. These solutions also contained pentylammonium bromides or p-toluidine halides and exhibited remarkable viscoelasticity. Because the molar ratio of surfactants to cationic additives in these micelles seemed close to unity, they formed 1:1 stoichiometric complexes between surfactant anions and additive cations, as previously found in systems of cationic surfactants such as hexadecyltrimethylammonium bromide and sodium salicylate. The viscoelastic behavior of these anionic threadlike micellar systems was adequately described by a simple Maxwell element with a single relaxation time and strength, as in many similar cationic systems.     

Electrochemical investigation of acid-base properties of ordered liquid systems

Acid-base properties of ordered media were investigated via potentiometry, polarography and electrochemical probes. Electrochemical probes have a pH-dependent reduction potential and their oxidized and reduced forms have a different affinity for aqueous and organic phases. Solutions of anionic, cationic and nonionic surfactants were investigated. One anionic and one cationic surfactant stabilized emulsion were studied. A water-dodecane-pentanol-anionic surfactant microemulsion and a water-heptane-butanol-cationic surfactant were also investigated for several compositions. In micellar solutions and emulsions, it was possible to standardize and use the classical glass electrode for pH values in the range 1-12. The hydrogen electrode was required in the microemulsion systems. The reduction of electrochemical probes was studied by polarography. It is shown that in the ordered media studied, the aqueous phase played the most important role in micellar solutions and in O/W emulsions, as far as acid-base properties were concerned. In microemulsions, the acid-base properties of the aqueous phase were very different to those of water. The alizarin probe could be reduced at a "local" pH of about 12 when the aqueous phase pH was only 6.     

Phase behavior and molecular thermodynamics of coacervation in oppositely charged polyelectrolyte/surfactant systems: a cationic polymer JR 400 and anionic surfactant SDS mixture

Coacervation in mixtures of polyelectrolytes and surfactants with opposite charge is common in nature and is also technologically important to consumer health care products. To understand the complexation behavior of these systems better, we combine multiple experimental techniques to systematically study the polymer/surfactant binding interactions and the phase behavior of anionic sodium dodecyl sulfate (SDS) surfactant in cationic JR 400 polymer aqueous solutions. The phase-behavior study resolves a discrepancy in the literature by identifying a metastable phase between the differing redissolution phase boundaries reported in the literature for the surfactant-rich regime. Isothermal titration calorimetry analyzed within the framework of the simple Satake-Yang model identifies binding parameters for the surfactant-lean phase, whereas a calculation for polymer-bound micelles coexisting with free micelles is analyzed in the surfactant-rich redissolution regime. This analysis provides a preliminary understanding of the interactions governing the observed phase behavior. The resulting thermodynamic properties, including binding constants and the molar Gibbs free energies, enthalpies, and entropies, identify the relative importance of both hydrophobic and electrostatic interactions and provide a first approximation for the corresponding microstructures in the different phases. Our study also addresses the stability and metastability of oppositely charged polyelectrolytes and surfactant mixtures.     

The Interaction between High-Molecular-Weight Flocculents and Ionic Surfactants

The interaction between the anionic and cationic polyelectrolytes of various molecular masses and charges and the ionic surfactants in aqueous and salt solutions is studied by viscometry, conductometry, light scattering, and electrophoresis. Oppositely charged molecules of surfactant and polymer form strong complexes due to the forces of electrostatic attraction that is manifested in a significant decrease in the viscosity and light transmission, as well as in the relative reduction in solution conductivity. As the surfactant/polyelectrolyte ratio increases, the forming complexes precipitated and then dissolved again. In the case of strongly charged polyelectrolytes, the partial dissolution of precipitates was observed preceding the wide region of destabilization. In this region, the value of surfactant/polyelectrolyte charge ratio reaches 3–4. The interaction between the cationic surfactants and anionic polyelectrolyte increases with the lengthening of alkyl radical, thus indicating the presence of cooperative interactions between the surfactant molecules bonded to polymer and the important role of relevant hydrophobic interactions. As a result, the interaction between the high-molecular-weight anionic polyelectrolytes and anionic surfactants containing aromatic core takes place in some cases.     

Synthesis of highly-ordered mesoporous silica particles using mixed cationic and anionic surfactants as templates

We applied a molecular assembly formed in an aqueous surfactant mixture of cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium octylsulfate (SOS) as templates of mesoporous silica materials. The hexagonal pore size can be controlled between 3.22 and 3.66 nm with the mixed surfactant system. In addition, we could observe the lamellar structure of the mixed surfactants with precursor molecules, which strongly shows the possibility of precise control of both the pore size and the structure of pores by changing the mixing ratio of surfactants. Moreover, use of the cationic surfactant having longer hydrophobic chain like stearyltrimethylammonium bromide (STAB) caused the increase in d(100) space and shifted the point of phase transition from hexagonal phase to lamellar phase to lower concentration of SOS.     

Temperature-sensitive aqueous surfactant two-phase system formation in cationic-anionic surfactant systems

Temperature-induced aqueous surfactant two-phase system (T-ASTP), which was found to be of generic importance, was investigated in a series of conventional mixed cationic-anionic surfactant systems. On the basis of the investigations of turbidity, dynamic light scattering, transmission electron microscopy, and fluorescence resonance energy transfer, the formation of T-ASTP can be attributed to temperature-induced vesicle aggregation. Aggregated vesicles existed in the upper part, while the separated vesicles existed in the lower part. The phase separation temperature can be regulated by varying the surfactant composition or adding additives, such as d-sorbitol, urea, or NaBr. The hydrophobic interaction and cooperative effect between cationic and anionic surfactants played a significant role in the formation of T-ASTP.     

表面活性剂对CdSe量子点荧光性能的影响

通过添加不同类型的表面活性剂在水相中制备了CdSe量子点。用透射电子显微镜(TEM)、X射线衍射(XRD)、X-射线光电子能谱(XPS)对其进行了表征,并用紫外-可见(UV-Vis)和荧光(PL)分光光度法研究了不同类型的表面活性剂对CdSe量子点吸收光谱和荧光光谱的影响。结果表明,加入长链的非离子型和阴离子型表面活性剂制备的CdSe量子点颗粒只有几个纳米,分散性好,量子点的荧光强度也有明显的增强,而加入阳离子表面活性剂制备的量子点颗粒团聚明显,其荧光出现淬灭。     

Atmospheric and electrochemical oxidation of ascorbic acid in anionic,nonionic and cationic surfactant systems

It is well known that the antioxidant activity of some species in homogenous solutions may not be the same as that in heterogeneous media. This environment dependence is the reason for investigating ascorbic acid antioxidant activity in surfactant solutions. In our study we have investigated the kinetics of atmospheric oxidation and electrochemical oxidation of ascorbic acid in aqueous solutions of the four surfactants: SDS, AOT (anionic), TRITON-100 (nonionic), and CTAB (cationic). For each surfactant the concentrations below and above CMC were investigated. As expected, a general trend in the atmospheric oxidation rate changes in the following manner: the micellar solution of nonionic surfactant shows a faster oxidation rate than that of the anionic surfactant, and the cationic surfactant an even higher one. The more subtle effects were observed with each surfactant concentration change. The influence of the surfactants on the electrochemical behavior of ascorbic acid was also studied. A general conclusion emerging from our investigation is that surfactants shift the ascorbic acid oxidation potential and change the peak current value. This phenomenon is due mainly to the surfactant film formed at the electrode/solution interface.     

Synergism in the spreading of hydrocarbon-chain surfactants on polyethylene film-anionic and cationic mixtures by a two-step procedure

A study has been made of the adsorption, interaction, and spreading of mixtures of anionic and cationic surfactants at the aqueous solution/polyethylene (PE) interface. When a drop of an aqueous solution of an anionic or cationic hydrocarbon-chain surfactant is placed on a highly hydrophobic PE film (contact angle of water > 90 degrees ), it spreads to an area very little larger than that of a drop of water of the same volume. If the anionic and cationic hydrocarbon-chain surfactant solutions are mixed prior to being applied to PE film, synergism is small, if any, and the reproducibility of the experimental results is poor. However, when the cationic and anionic aqueous solutions are applied on the PE film in a sequential manner, a remarkable synergism in spreading is observed and the results are very reproducible. The area spread by an aqueous solution of the anionic-cationic mixture may be more than 400 times that of aqueous solutions of the same volume and surfactant concentration of the individual surfactant components. Previous work in this laboratory on surfactant systems showing synergism in spreading on PE film, but only weak interaction at the aqueous solution/air interface, showed that the synergy was due to changes at the aqueous solution/PE interface and not to the changes at the aqueous solution/air or PE/air interface. Investigation of the adsorption behavior at the aqueous solution/solid interface of two of the anionic-cationic mixtures studied here indicates the reason for differences in spreading behavior observed with different anionic-cationic mixtures. The more similar the adsorption tendencies at the solid/aqueous solution interface of the anionic and cationic surfactants, and the closer their adsorption to an equimolar monolayer there, the stronger their interaction there and the greater their enhancement of the spreading. A mechanism is proposed for the synergy in spreading observed, based upon the difference between the surface tension in the precursor film at the spreading interface and that at the top of the spreading drop.     

DNA encapsulation by biocompatible catanionic vesicles

The encapsulation of DNA by catanionic vesicles has been investigated; the vesicles are composed of one cationic surfactant, in excess, and one anionic. Since cationic systems are often toxic, we introduced a novel divalent cationic amino-acid-based amphiphile, which may enhance transfection and appears to be nontoxic, in our catanionic vesicle mixtures. The cationic amphiphile is arginine-N-lauroyl amide dihydrochloride (ALA), while the anionic one is sodium cetylsulfate (SCS). Vesicles formed spontaneously in aqueous mixtures of the two surfactants and were characterized with respect to internal structure and size by cryogenic transmission electron microscopy (cryo-TEM); the vesicles are markedly polydisperse. The results are compared with a study of an analogous system based on a short-chained anionic surfactant, sodium octylsulfate (SOS). Addition of DNA to catanionic vesicles resulted in associative phase separation at very low DNA concentrations; there is a separation into a precipitate and a supernatant solution; the latter is first bluish but becomes clearer as more DNA is added. From studies using cryo-TEM and small angle X-ray scattering (SAXS) it is demonstrated that there is a lamellar structure with DNA arranged between the amphiphile bilayers. Comparing the SOS containing DNA-vesicle complexes with the SCS ones, an increase in the repeat distance is perceived for SCS. Regarding the phase-separating DNA-amphiphile particles, cryo-TEM demonstrates a large and nonmonotonic variation of particle size as the DNA-amphiphile ratio is varied, with the largest particles obtained in the vicinity of overall charge neutrality. No major differences in phase behavior were noticed for the systems here presented as compared with those based on classical cationic surfactants. However, the prospect of using these systems in real biological applications offers a great advantage.     

Interactions of a hydrophobically modified polymer with oppositely charged surfactants

The interaction of a hydrophobically modified anionic polymer (PMAOVE) with a cationic surfactant (DTAB) was studied using a multi-technique approach: turbidity, surface tension, and viscosity measurements, as well as EPR (5-doxyl stearic acid) and fluorescence (pyrene) probe techniques were used. In the investigated pH range (4-10), the cationic surfactant headgroups interact with the anionic carboxylic groups of the polymer backbone. In addition, nonpolar interactions of the surfactant chains with the n-octyl chains of PMAOVE stabilize the PMAOVE-DTAB complexes. Charge neutralization of the anionic polymer by the cationic surfactant leads to precipitation of the PMAOVE-DTAB complex at a certain DTAB concentration range. Further addition of DTAB causes a charge reversal of the complex and, subsequently, resolubilization of the precipitate. At an acidic pH (pH = 4), a second precipitation was observed, which is probably caused by conformational changes in the PMAOVE-DTAB complex. This second precipitate can be resolubilized by further addition of surfactant. At a neutral and basic pH, this second precipitation is absent. EPR analysis indicates that the surfactants form an ordered structure at the extended polymer chain at a neutral and basic pH, whereas at an acidic pH, a less ordered surfactant layer is formed on the coiled polymer with more hydrophobic microdomains.