碳材料中多层次孔对负载铂电催化活性的影响

分别以商用碳黑XC-72、介孔碳CMK-5和含多层次孔的碳气凝胶HCA为载体, 微波法负载Pt纳米粒子, 在硫酸和甲醇溶液中进行循环伏安测试, 考察碳材料中多层次孔对其电催化活性的影响. 结果显示, Pt/HCA电极表现出较高的峰电流(7.5 mA·cm-2)和电化学活性面积(128.0 m2·g-1). 这可能是因为碳气凝胶具有连续但非周期性的介孔结构, 有利于Pt纳米粒子的分散以及反应物质的传质.     

Stepwise synthesis, characterization, and electrochemical properties of ordered mesoporous carbons containing well-dispersed Pt nanoparticles using a functionalized template route

A stepwise method is described for the accurately controlled growth of Pt nanoparticles supported on ordered mesoporous carbons (Pt-OMC) by the nanocasting of carbon and metal precursors in the pore channels of mesoporous silicas functionalized with Si-H groups. Results obtained from N₂ adsorption/desorption isotherms and transmission electron microscopy showed well-dispersed Pt nanoparticles (2-3 nm) on Pt-OMC with high surface area (837 m² g⁻¹) and regular pore channels (2.9 nm), which facilitate reactant/product diffusion. X-ray diffraction and X-ray photoelectron spectroscopy indicated that Pt nanoparticles in the Pt-OMC sample were mostly present in the metallic form of a face-centered cubic (fcc) crystalline structure. The Pt-OMC catalyst was found to have superior electrocatalytic properties during oxygen reduction reaction as compared to typical commercial electrocatalysts.     

In situ PEI and formic acid directed formation of Pt NPs/MWNTs hybrid material with excellent electrocatalytic activity

A hybrid material based on Pt nanoparticles (Pt NPs) and multi-walled carbon nanotubes (MWNTs) was fabricated with the assistance of PEI and formic acid. The cationic polyelectrolyte PEI not only favored the homogenous dispersion of carbon nanotubes (CNTs) in water, but also provided sites for the adsorption of anionic ions PtCl₄²⁻ on the MWNTs’ sidewalls. Deposition of Pt NPs on the MWNTs’ sidewalls was realized by in situ chemical reduction of anionic ions PtCl₄²⁻ with formic acid. The hybrid material was characterized with TEM, XRD and XPS. Its excellent electrocatalytic activity towards both oxygen reduction in acid media and dopamine redox was also discussed.     

Investigation of electrocatalytic and analytical ability of Pt nanoparticles supported on active carbon modified electrode to analytical determination of glucose

The electrocatalytic and analytical ability to glucose on a highly dispersed Pt nanoparticles supported on active carbon (Pt/C) modified electrode was investigated. The Pt/C nanocomposite was synthesized using a microwave method. The structural characterization and surface morphology of the prepared Pt/C nanocomposite was examined using X-ray diffraction, energy-dispersive X-ray, scanning and transmission electron microscopy. The results show that the Pt nanoparticles with 3–10 nm in diameter are well dispersed on the surface of active carbon. The electrocatalytic and analytical ability of Pt nanoparticles supported on active carbon modified electrode (Pt/C/GCE) was studied using cyclic voltammetry (CV) and chronoamperommetry. The Pt/C/GCE exhibits strong electrocatalytic activity to the glucose oxidation. Under optimal conditions, the Pt/C/GCE performed a current response towards glucose oxidation at a broad concentration range from 0.05 to 11.95 mM. Two linear regions could be observed at 0.05 to 3.5 mM with a sensitivity of 1.29 μA mM^–1 cm^–2 and at 3.5 to 11.95 mM with a sensitivity of 0.85 μA mM^–1 cm^–2, respectively. The Pt/C/GCE exhibits sufficient sensitivity and abilities of anti-interference.     

Electrodeposition and electrocatalytic properties of platinum nanoparticles on multi-walled carbon nanotubes: effect of the deposition conditions

Platinum (Pt) nanoparticles were electrochemically deposited on multi-walled carbon nanotubes (MWCNTs) through a three-step process, including an electrochemical treatment of MWCNT, electro-oxidation of PtCl₄ ²⁻ to Pt(IV) complex, and an electro-conversion of Pt(0) on MWCNT. The effect of formation conditions for Pt(IV) complexes on the Pt nanoparticals transformed was investigated. The structure and elemental composition of the resulting Pt/MWCNT electrode were characterized by transmission electron micrograph (TEM) and energy dispersive X-ray spectroscopy (EDX). The electrocatalytic properties of the resulting Pt/MWCNT electrode for methanol oxidation have been investigated. The high electrocatalytic activity and good stability of Pt/MWCNT electrode may be attributed to the high dispersion of platinum nanoparticles and the particular properties of the MWCNT supports.     

纳米三氧化钨修饰碳纳米管载铂催化剂对甲醇氧化的电催化性能

采用表面修饰技术将碳纳米管(CNT)表面羧基化, 通过羧基将钨离子基团修饰到碳纳米管的外表面, 再通过高温焙烧处理将钨离子基团氧化成WO₃, 成功合成了纳米WO₃/CNT复合物, 进一步还原Pt 的前驱体而得到Pt-WO₃/CNT复合催化剂. 采用X射线粉末衍射(XRD)和透射电镜(TEM)对样品的形貌和晶型结构进行了表征, 结果表明, Pt纳米粒子为面心立方晶体结构, 均匀地分布在WO₃修饰的碳纳米管表面. 采用循环伏安(CV)和计时电流法研究了在酸性溶液中Pt-WO₃/CNT催化剂对甲醇的电催化氧化活性, 结果表明WO₃修饰的碳纳米管载铂催化剂比用混酸处理的碳纳米管载铂催化剂对甲醇呈现出更高的电催化氧化活性和更好的稳定性.     

单分散PtNi纳米粒子特殊的红外光学性能

采用电位置换反应以及化学还原法制备了单分散PtNi 纳米粒子,循环伏安结果显示该纳米粒子在0.1mol·L^-1硫酸介质中对CO的氧化表现出比本体Pt 电极更好的电催化活性. 以CO为探针分子,采用电化学原位红外光谱研究了PtNi 纳米粒子上的特殊红外光学性能. 结果表明,PtNi 纳米粒子无论是在玻碳电极还是在金电极上,均表现出对称的双极谱峰,同时给出很强的增强效应. 论文研究结果有助于进一步了解低维纳米材料特殊红外性能的本质.     

Pulsed electrodeposition of Pt nanoclusters on carbon nanotubes modified carbon materials using diffusion restricting viscous electrolytes

A simple method for achieving high dispersion and small platinum nanoparticles down to only 2 or 3 nm on structured carbon supports (carbon nanotubes-modified PAN-based carbon fiber and carbon nanotubes-modified graphite foil) is presented. Pulsed electrodeposition of Pt nanoparticles was performed at increased viscosity of the H₂PtCl₆ containing electrolyte by addition of glycerol. The catalyst nanoparticle size can be controlled by varying the amount of glycerol added into the aqueous H₂PtCl₆ solution, and adjusting the number of the potential pulses. The shape and size of the Pt nanoparticles was characterized by scanning electron microscopy and transmission electron microscopy. The electrocatalytic properties of Pt nanoparticles with respect to O₂ and H₂O reduction were investigated by means of cyclic voltammetry, and the improved catalytic activity of the Pt nanoparticles/carbon nanotubes surfaces could be proved.     

Electroreduction of Oxygen and Electrooxidation of Methanol at Carbon and Single Wall Carbon Nanotube Supported Platinum Electrodes

The present research aimed at investigating the electrocatalytic properties and the electrochemical deposition of Pt nanoparticles on carbon powder, carbon nanotube and preparation of carbon and single wall carbon nanotube supported platinum electrodes. The Pt nanoparticles were synthesized by electroreduction of hexachloroplatinic acid in aqueous solution at ?200 mV. Electrocatalytic properties of the modified electrodes for oxygen reduction were investigated by cyclic voltammetry in O₂ saturated solution containing 0.1 M HClO₄. Methanol electrooxidation at the modified surfaces in 0.5 M HCLO₄ was studied by cyclic voltammetry. The corresponding results showed that the Pt/SWCNT/GC electrode exhibits more improved catalytical activity than the Pt/C/GC electrode.     

Fabrication of Pt/polypyrrole hybrid hollow microspheres and their application in electrochemical biosensing towards hydrogen peroxide

Pt/polypyrrole (PPy) hybrid hollow microspheres were successfully prepared by wet chemical method via Fe₃O₄ template and evaluated as electrocatalysts for the reduction of hydrogen peroxide. The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD), inductive coupled plasma emission spectrum (ICP) and Fourier-transform infrared spectra (FTIR) measurements. The results exhibited that ultra-high-density Pt nanoparticles (NPs) were well deposited on the PPy shell with the mean diameters of around 4.1 nm. Cyclic voltammetry (CV) results demonstrated that Pt/PPy hybrid hollow microspheres, as enzyme-less catalysts, exhibited good electrocatalytic activity towards the reduction of hydrogen peroxide in 0.1 M phosphate buffer solution (pH = 7.0). The composite had a fast response of less than 2 s with linear range of 1.0-8.0 mM and a relatively low detection limit of 1.2 μM (S/N = 3). The sensitivity of the sensor for H₂O₂ was 80.4 mA M⁻¹ cm⁻².     

Synthesis of Pt and Pt-Fe nanoparticles supported on MWCNTs used as electrocatalysts in the methanol oxidation reaction

This work reports a feasible synthesis of highly-dispersed Pt and Pt-Fe nanoparticles supported on multiwall carbon nanotubes (MWCNTs) without Fe and multiwall carbon nanotubes with iron (MWCNTs-Fe) which applied as electrocatalysts for methanol electrooxidation. A Pt coordination complex salt was synthesized in an aqueous solution and it was used as precursor to prepare Pt/MWCNTs, Pt/MWCNTs-Fe, and Pt-Fe/MWCNTs using FeCl₂·4NH₂O as iron source which were named S1, S2 and S3, respectively. The coordination complex of platinum (TOA)₂PtCl₆ was obtained by the chemical reaction between (NH₄)₂PtCl₆ with tetraoctylammonium bromide (TOAB) and it was characterized by FT-IR and TGA. The materials were characterized by Raman spectroscopy, SEM, EDS, XRD, TEM and TGA. The electrocatalytic activity of Pt-based supported on MWCNTs in the methanol oxidation was investigated by cyclic voltammetry (CV) and chronoamperometry (CA). Pt-Fe/MWCNTs electrocatalysts showed the highest electrocatalytic activity and stability among the tested electrocatalysts due to that the addition of ”Fe” promotes the OH species adsorption on the electrocatalyst surface at low potentials, thus, enhancing the activity toward the methanol oxidation reaction (MOR).     

Self-supported bimodal-pore structured nitrogen-doped carbon fiber aerogel as electrocatalyst for oxygen reduction reaction

Self-supported 3-dimensional (3D) nitrogen-doped bimodal-pore structured carbon fiber aerogel is synthesized via a facile carbonization process using prawn shells as the raw material. The fabricated N-doped carbon fiber aerogel possesses micro- and meso-porous pores with an N doping level of 5.9% and a high surface area of 526 m² g^− 1. As an electrocatalyst, the resultant N-doped carbon fiber aerogel exhibits superior electrocatalytic activity towards oxygen reduction reaction (ORR) with a more positive ORR onset-potential, better stability and high resistance to crossover effect compared to the commercial Pt/C electrocatalyst.     

High-loading Pt nanoparticles on mesoporous carbon with large mesopores for highly active methanol electro-oxidation

High metal-loading Pt/C electrocatalysts are important for the fabrication of thin-layered membrane electrode assemblies (MEAs). However, the preparation of high-loading Pt catalysts with a narrow size distribution of nanoparticles remains a challenge. Herein, ordered mesoporous carbon (OMC) with large mesopores (~15 nm) and a high surface area (1316.0 m² g^?1) was fabricated using a SiO₂ nanosphere array as a template. This material was developed to support a high loading of Pt nanoparticles (60 wt%) and was then used as an electrocatalyst for the methanol oxidation reaction (MOR). The prepared Pt/OMC contains Pt nanoparticles with an average size of ~1.9 nm that are uniformly dispersed on the mesoporous walls of the OMC. The Pt/OMC catalyst exhibits smaller Pt nanoparticle size, greater Pt dispersion, larger specific electrochemically active surface area (ECSA), and higher electrocatalytic activity for the MOR than the carbon black (Vulcan XC-72R)-supported Pt and the commercial Pt/C catalysts.     

Electrodeposition of Platinum Nanoparticles on Multi-Walled Carbon Nanotubes for Electrocatalytic Oxidation of Methanol

Platinum (Pt) nanoparticles were deposited at the surface of well-aligned multi-walled carbon nanotubes (MWNTs) by potential cycling between +0.50 and −0.70 V at a scanning rate of 50 mV · s⁻¹ in 5 mM Na₂PtCl₆ solution containing 0.1 M NaCl. The electrocatalytic oxidation of methanol at the nanocomposites of Pt nanoparticles/nanotubes (Pt_nano/MWNTs) has been investigated using 0.2 M H₂SO₄ as supporting electrolyte. The effects of various parameters, such as Pt loading, concentration of methanol, medium temperature as well as the stability of Pt_nano/MWNTs electrode, have been studied. Compared to glassy carbon electrode, carbon nanotube electrode significantly enhances the catalytic efficiency of Pt nanoparticles for methanol oxidation. This improvement in performance is due not only to the high surface area and the fast electron transfer rate of nanotubes but also to the highly dispersed Pt nanoparticles as electrocatalysts at the tips and the sidewalls of nanotubes.     

Copper nanoparticles entrapped in SWCNT-PPy nanocomposite on Pt electrode as NOx electrochemical sensor

A highly sensitive NO_x sensor was designed and developed by electrochemical incorporation of copper nanoparticles (CuNP) on single-walled carbon nanotubes (SWCNT)-polypyrrole (PPy) nanocomposite modified Pt electrode. The modified electrodes were characterized by scanning electron microscopy and energy dispersive X-ray analysis. Further, the electrochemical behavior of the CuNP-SWCNT-PPy-Pt electrode was investigated by cyclic voltammetry. It exhibited the characteristic CuNP reversible redox peaks at −0.15 V and −0.3 V vs. Ag/AgCl respectively. The electrocatalytic activity of the CuNP-SWCNT-PPy-Pt electrode towards NO_x is four-fold than the CuNP-PPy-Pt electrode. These results clearly revealed that the SWCNT-PPy nanocomposite facilitated the electron transfer from CuNP to Pt electrode and provided an electrochemical approach for the determination of NO_x. A linear dependence (r² = 0.9946) on the NO_x concentrations ranging from 0.7 to 2000 μM, with a sensitivity of 0.22 ± 0.002 μA μM⁻¹ cm⁻² and detection limit of 0.7 μM was observed for the CuNP-SWCNT-PPy-Pt electrode. In addition, the sensor exhibited good reproducibility and retained stability over a period of one month.     

氮掺杂有序介孔碳-Ni纳米复合材料的制备及电化学性能

以F₁₂₇为模板剂,NiCl₂为镍源,尿素为氮源,间苯二酚甲醛原位聚合树脂为碳源,分别采用均相法和两相法制备Ni-N-OMC-1,Ni-N-OMC-2纳米复合材料.X射线衍射(XRD)、激光拉曼以及透射电子显微镜(TEM)等测试结果表明,复合材料具有有序介孔结构,Ni以金属微粒形式嵌于碳骨架中,提高了有序介孔碳的石墨化程度.X射线光电子能谱测试(XPS)表明尿素热解后以4种形式存在:sp³杂化与C结合的N原子,吡啶N原子,sp²杂化与C结合的N原子以及quaternary-N原子.Ni-N的共改性改变了碳载体的理化性质,有利于Pt纳米粒子的负载与分散.均相法制备的Ni-N-OMC-1复合材料微波负载Pt后,氧还原极限电流密度为5.32mA·cm^-2,氢氧化电化学活性面积高达138.53m²·g^-1,电化学催化活性优于商业20%Pt/C材料(4.49mA·cm^-2,96.98m²·g^-1).     

氮掺杂有序介孔碳-Ni纳米复合材料的制备及电化学性能

以F127为模板剂,Ni Cl2为镍源,尿素为氮源,间苯二酚甲醛原位聚合树脂为碳源,分别采用均相法和两相法制备Ni-NOMC-1,Ni-N-OMC-2纳米复合材料。X射线衍射(XRD)、激光拉曼以及透射电子显微镜(TEM)等测试结果表明,复合材料具有有序介孔结构,Ni以金属微粒形式嵌于碳骨架中,提高了有序介孔碳的石墨化程度。X射线光电子能谱测试(XPS)表明尿素热解后以4种形式存在:sp3杂化与C结合的N原子,吡啶N原子,sp2杂化与C结合的N原子以及quaternary-N原子。Ni-N的共改性改变了碳载体的理化性质,有利于Pt纳米粒子的负载与分散。均相法制备的Ni-N-OMC-1复合材料微波负载Pt后,氧还原极限电流密度为5.32 m A·cm-2,氢氧化电化学活性面积高达138.53 m2·g-1,电化学催化活性优于商业20%Pt/C材料(4.49 m A·cm-2,96.98 m2·g-1)。     

Direct electrocatalytic oxidation of nitric oxide and reduction of hydrogen peroxide based on α-Fe2O3 nanoparticles-chitosan composite

α-Fe₂O₃ nanoparticles prepared using a simple solution-combusting method have been dispersed in chitosan (CH) solution to fabricate nanocomposite film on glass carbon electrode (GCE). The as-prepared α-Fe₂O₃ nanoparticles were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM). The nanocomposite film exhibits high electrocatalytic oxidation for nitric oxide (NO) and reduction for hydrogen peroxide (H₂O₂). The electrocatalytic oxidation peak is observed at +0.82 V (vs. Ag/AgCl) and controlled by diffusion process. The electrocatalytic reduction peak is observed at −0.45 V (vs. Ag/AgCl) and controlled by diffusion process. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode has response time of 5 s, linearity as 5.0 × 10⁻⁷ to 15.0 × 10⁻⁶ M of NO with a detection limit of 8.0 × 10⁻⁸ M and a sensitivity of −283.6 μA/mM. This α-Fe₂O₃-CH/GCE nanocomposite bioelectrode was further utilized in detection of H₂O₂ with a detection limit of 4.0 × 10⁻⁷ M, linearity as 1.0 × 10⁻⁶ to 44.0 × 10⁻⁶ M and with a sensitivity of 21.62 μA/mM. The shelf life of this bioelectrode is about 6 weeks under room temperature conditions.     

Pyrolysis of chloroplatinic acid to directly immobilize platinum nanoparticles onto multi-walled carbon nanotubes

Platinum nanoparticles supported on multi-walled carbon nanotubes (Pt/MWCNTs) were first prepared by simple pyrolysis of H₂PtCl₆ solution. The structure of Pt/MWCNTs was characterized with X-ray diffraction (XRD), scanning electron microscope (SEM), and the results showed that the diameter of the obtained platinum nanoparticles immobilized on MWCNTs was below 50 nm, although the obtained platinum nanoparticles were not well uniformly dispersed on the surface of MWCNTs. The electrocatalytic performance of Pt/MWCNTs electrode for methanol oxidation reaction (MOR) was also investigated by linear sweep voltammetry (LSV), indicating that it was possible to employ the obtained platinum nanoparticles as anode material in fuel cell. Developing a novel and simple method to prepare platinum nanoparticles onto MWCNTs is the main contribution of this letter. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1050–1053. The text was submitted the authors in English.     

Oxidation of methanol at the network film of polyoxometallate-linked ruthenium-stabilized platinum nanoparticles

We explore here the ability of ruthenium hydroxo species to undergo spontaneous deposition on Pt nanoparticles and to form colloidal solutions of oxoruthenium-protected (-stabilized) nanoparticles of Pt. These particles can be spontaneously attracted to carbon substrates, and they form ultrathin self-assembled films. Fabrication of the multilayer network films on electrodes has been achieved by linking the positively charged oxoruthenium-covered Pt clusters with heteropolyanions of tungsten. By repeated alternate treatments in a solution of phosphododecatungstate (PW₁₂O₄₀^3–) and in a colloidal suspension of oxoruthenium-protected (-stabilized) Pt nanoparticles, the film thickness can be increased systematically (layer by layer) to form stable three-dimensional assemblies on carbon electrodes. It is apparent from cyclic voltammetric and chronoamperometric measurements (that were performed at 20 and 60 °C) that the resulting hybrid films show attractive properties towards the oxidation of methanol at fairly low potentials (0.25–0.4 V versus the saturated calomel electrode). With approximately the same loading of oxoruthenium-covered Pt nanoparticles and under analogous conditions, linking or derivatizing the nanoparticles with phosphotungstate leads to the systems higher electrocatalytic activity. It is possible that, in addition to ruthenium hydroxo species, PW₁₂O₄₀^3– exhibits an activating effect on dispersed Pt particles. An alternative explanation may involve the possibility of different morphologies of the catalytic films in the presence and absence of phosphotungstate anions.Dedicated to Zbigniew Galus on the occation of his 70th birthday