N、F共掺杂TiO2可见光响应光催化剂的酸催化水解法制备及表征

采用酸催化水解法由TiCl4、NH4F混合液合成N、F共掺杂可见光响应TiO2光催化剂(TONF). 以苯酚为模型物, 考察了催化剂在可见光区、紫外光区的催化活性. 采用X射线光电子能谱(XPS)、紫外-可见漫反射光谱(DRS)、X射线衍射(XRD)、扫描电子显微镜(SEM)及低温氮物理吸附对光催化剂的晶相结构、光谱特征和表面结构等进行表征. 结果表明, 适量的N、F共掺杂TONF催化剂表现出较高的可见光催化活性. N、F共掺杂可显著提高TiO2分散性能, 促进锐钛矿相的形成, 抑制其向金红石相转变, 提高相转变温度. N掺杂可提高TiO2在可见光区的吸收; F掺杂可使TiO2能隙变窄.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation

Sulfur and copper codoped TiO₂ nanoparticles were prepared by sol-hydrothermal process. And the samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectra analysis, scanning electron microscopy, Brunauer Emmett Teller analysis, UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectra and X-ray fluorescence analysis. It was found that the S, Cu-codoped TiO₂ became amorphous with the increase of Cu content, and copper on the surface of TiO₂ existed in the oxidation state of Cu(II) while S in the form of S⁶⁺ species. And the codoped particles had higher surface area, smaller particle size, stronger spectral response in visible region compared with pure TiO₂. The effects of doping amount in a wide range, catalyst dosage, and recycle on the photocatalytic activity of the codoped catalysts were investigated with Acid Orange 7 as the model compound under visible light illumination (λ > 447 nm). The results showed that S (2.0 %), Cu (5.0 %) codoped TiO₂ had the highest visible light photocatalytic activity and good reusability performance. The kinetic study showed that this photocatalytic process coincided with the Langmuir–Hinshelwood pseudo first order reaction model.     

Boron and nitrogen-codoped TiO2 nanorods: Synthesis, characterization, and photoelectrochemical properties

Boron and nitrogen codoped TiO₂ nanorods (BNTRs) were synthesized via two-step hydrothermal reactions using TiN as a starting material. The as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscope (SEM), transmission electron microscopy and X-ray photoelectron spectroscopy techniques. The results showed that TiO₂ nanorods with the diameter of approximately 50–100 nm and the length of several micrometers were doped by the interstitial N and B. The nanorods were firstly formed in the hydrothermal synthesis of nitrogen doped TiO₂. The growing process of nanorods was observed by SEM and a most probable formation mechanism of the trititanate nanorods was proposed. The BNTRs showed a higher photocatalytic activity and a bigger photocurrent response than N–TiO₂ nanorods under visible light irradiation.     

Gd-N共掺杂SrTiO3/TiO2复合纳米纤维制备及光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质和反应物,结合一步水热法制得Gd-N共掺杂SrTiO_3/TiO_2复合纳米纤维光催化剂。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)、X射线光电子能谱(XPS)、紫外-可见漫反射(UV-Vis DRS)和荧光光谱(PL)等方法对其微观结构、形貌和光学性能进行表征。结果表明:SrTiO_3和TiO_2形成异质结能够使光生电子和空穴得到很好的分离,而Gd-N共掺杂产生新带隙,可以拓宽光谱响应范围至可见光区,并引起晶格缺陷,成为光生电子-空穴对的浅势捕获阱。Gd-N共掺杂与异质结的协同作用有效提高了SrTiO_3/TiO_2复合纳米纤维的可见光催化活性。     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with nitrogen and cerium

Nitrogen and cerium codoped TiO₂ photocatalysts were prepared by a modified sol-gel process with doping precursors of cerium nitrate and urea, and characterized by X-ray diffraction (XRD), thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray photoelectron spectra (XPS) and ultraviolet-visible light diffuse reflectance spectra (UV-vis DRS). Results indicate that anatase TiO₂ is the dominant crystalline type in as-prepared samples, and CeO₂ crystallites appear as the doping ratio of Ce/Ti reaches to 3.0 at%. The TiO₂ starts to transform from amorphous phase to anatase at 987.1 K during calcination, according to the TG-DSC curves. The XPS show that three major metal ions of Ce³⁺, Ce⁴⁺, Ti⁴⁺ and one minor metal ion of Ti³⁺ coexist on the surface. The codoped TiO₂ exhibits significant absorption within the range of 400-500 nm compared to the non-doped and only nitrogen-doped TiO₂. The enhanced photocatalytic activity of the codoped TiO₂ is demonstrated through degradation of methyl orange under visible light irradiation.     

Preparation and photocatalytic activity of nonmetal Co-doped titanium dioxide photocatalyst

A series of boron and sulfur co-doped titanium dioxide (TiO₂) photocatalysts were prepared by a sol-gel method using boric acid, thiourea and tetrabutyl titanate [Ti(OC₄H₉)₄] as precursors. The photoabsorbance of as-prepared photocatalysts was measured by UV–Vis diffuse reflectance spectroscopy (DRS), and its microstructure was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and N₂ adsorption-desorption measurements. The prepared photocatalysts consisted of the anatase phase mainly in the form of spherical particles. The photocatalytic performance was studied by photodegradation of methyl blue (MB) in water under UV and visible light irradiation. The calcination temperature and the codoping content influenced the photoactivity. The synergistic effect of boron and sulfur co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of codoped TiO₂ was also confirmed, the photocatalytic activity of TiO₂ remained above 91% of that of the fresh sample after being used four times. It was shown that the co-doped TiO₂ could be activated by visible light and could thus be potentially applied for the treatment of water contaminated by organic pollutants.     

Microstructures and photocatalytic properties of Ag and La surface codoped TiO2 films prepared by sol–gel method

Ag⁺ and La³⁺ surface codoped TiO₂ films were successfully prepared by the improved sol–gel and doping processes. The as-prepared specimens were characterized using differential thermal analysis-thermogravimetry (DTA–TG), X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Brunauer–Emmett–Teller (BET) surface area, Photoluminescence spectrum (PL) and UV–vis diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of an organic dye in aqueous solution. The results of XRD, FE-SEM and BET analyses indicated that the TiO₂ films were composed of nano-particles or aggregates with a size of less than 10 nm. With the codoping of Ag⁺ and La³⁺, TiO₂ films with high photocatalytic activity and clearly responsive to the visible light were obtained. The improvement mechanism by ions doping was also discussed.     

生物质C-N-P自掺杂TiO_2的合成及其对亚甲基兰的光催化降解活性

采用溶胶-超声辐照技术同步合成了生物质C-N-P自掺杂TiO_2复合催化剂,通过X射线光电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(FESEM)、紫外-可见漫反射光谱(UV-Vis-DRS)及光致发光光谱(PL)对样品进行了表征.以亚甲基兰(MB)为目标污染物,研究了C-N-P共掺杂TiO_2的可见光光催化性能.实验结果表明,在可见光照射下,光催化反应时间为2 h时,C-N-P共掺杂TiO_2复合催化剂对亚甲基兰的降解效率最高可达9 8.5%;相比纯TiO_2,C-N-P共掺杂TiO_2复合催化剂的比表面积增大,吸收边带红移,禁带宽度减小,相变温度升高,光生载流子复合率降低.     

三维有序结构In掺杂TiO_2薄膜的可见光催化活性

采用自组装生长聚苯乙烯胶体模板和溶胶-凝胶法,制备出三维(3D)有序结构In掺杂TiO2(IO-TiO2-In)薄膜可见光催化剂.光催化实验证明,IO-TiO2-In薄膜降解甲醛的可见光活性是TiO2和三维有序结构TiO2(IOTiO2)薄膜的5倍.利用X射线电子衍射(XRD)谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见(UV-Vis)漫反射吸收光谱确定了催化剂的晶相结构、表面微结构和能带结构.结果表明,IO-TiO2-In薄膜具有锐钛矿型三维有序结构,与TiO2相比,增加了比表面积,提高光的利用率;掺入的In离子在薄膜表面形成In2O3和O-In-Clx(x=1,2)物种,既增强可见光的吸收,又有效地促进了光生载流子的分离,提高了光生载流子在固/气界面参加光催化反应的利用率,使催化剂的可见光催化活性显著提高.     

微波辅助溶剂热合成In-Si共改性TiO2的增强光催化性能

利用微波辅助溶剂热法合成了In-Si 共改性的TiO₂ 光催化剂. 粉末X 射线衍射（XRD）、激光拉曼（Raman）光谱、N₂吸脱附（BET）、X射线光电子能谱（XPS）、光致发光（PL）光谱和紫外-可见漫反射光谱（UV-VisDRS）等实验表明,尽管掺杂和改性后TiO₂结晶度略有降低,但不影响光催化剂锐钛相的形成. Si 掺杂入TiO₂晶格使颗粒变小,比表面积变大. In 不能进入TiO₂晶格,在TiO₂表面形成了In₂O₃. 罗丹明B（RhB）降解实验显示,In-Si 共改性TiO₂表现出很高的紫外和可见光催化活性,Si：In：Ti 的摩尔比为0.03：0.02：1 的样品（IST-2）光催化活性最高,紫外光下3 min 即可将RhB降解完全,可见光下120 min RhB降解率为97%,这是由材料的高表面积,In₂O₃-TiO₂复合半导体之间高效电荷转移及染料敏化等共同作用所致. 对于苯酚,光催化降解则相对缓慢,700 min内尚不能降解完全.     

脉冲沉积制备Cu2O/TiO2纳米管异质结的可见光光催化性能

在用阳极氧化法制备有序排列TiO₂纳米管阵列薄膜的基础上,引入脉冲沉积工艺,成功实现了均匀、弥散分布的Cu₂O纳米颗粒修饰改性TiO₂纳米管阵列,形成Cu₂O/TiO₂ 纳米管异质结复合材料. 利用场发射扫描电镜（FESEM）、场发射透射电镜（FETEM）、X射线衍射（XRD）、X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）对样品进行表征,重点研究了Cu₂O/TiO₂ 纳米管异质结的光电化学特性和对甲基橙（MO）的可见光催化降解性能. 结果表明,Cu₂O纳米颗粒均匀附着在TiO₂纳米管阵列的管口和中部位置,所制备的Cu₂O/TiO₂ 纳米管异质结具有高效的可见光光催化性能;在浓度为0.01 mol·L^-1的CuSO₄溶液中制得的Cu₂O/TiO₂纳米管异质结表现出最好的电化学特性和光催化性能;另外,对Cu₂O纳米颗粒影响光催化活性的机理进行了讨论.     

Pt deposited TiO2 catalyst fabricated by thermal decomposition of titanium complex for solar hydrogen production

C, N codoped TiO₂ catalyst has been synthesized by thermal decomposition of a novel water-soluble titanium complex. The structure, morphology, and optical properties of the synthesized TiO₂ catalyst were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity of the Pt deposited TiO₂ catalysts synthesized at different temperatures was evaluated by means of hydrogen evolution reaction under both UV–vis and visible light irradiation. The investigation results reveal that the photocatalytic H₂ evolution rate strongly depended on the crystalline grain size as well as specific surface area of the synthesized catalyst. Our studies successfully demonstrate a simple method for the synthesis of visible-light responsive Pt deposited TiO₂ catalyst for solar hydrogen production.     

Hierarchical chlorine-doped rutile TiO2 spherical clusters of nanorods: Large-scale synthesis and high photocatalytic activity

In this study, we report the synthesis of hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods photocatalyst on a large scale via a soft interface approach. This catalyst showed much higher photocatalytic activity than the famous commercial titania (Degussa P25) under visible light (λ>420 nm). The resulting sample was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), nitrogen adsorption, X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy, ¹H solid magic-angle spinning nuclear magnetic resonance (MAS-NMR) and photoluminescence spectroscopy. On the basis of characterization results, we found that the doping of chlorine resulted in red shift of absorption and higher surface acidity as well as crystal defects in the photocatalyst, which were the reasons for high photocatalytic activity of chlorine-doped TiO₂ under visible light (λ>420 nm). These hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods are very attractive in the fields of environmental pollutants removal and solar cell because of their easy separation and high activity.     

Preparation and characterization of nitrogen-doped TiO2 photocatalyst in different acid environments

Nitrogen-doped TiO₂ powders were successfully prepared by a wet method, i.e., a micro-emulsion-hydrothermal method, in different acid environments. Several characterization techniques, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra, were combined to determine the crystal phase, concentration and chemical states of the nitrogen doped in TiO₂. The high photocatalytic activity of the nitrogen-doped TiO₂ was evaluated through the decomposition of rhodanmine B under visible light irradiation. It was suggested that the doped nitrogen formed oxynitride (NO) and produced impurity states at higher above the valence band of TiO₂. Therefore, the nitrogen doping could enhance the response of photocatalyst to the visible light and improve the photocatalytic activity because of the narrowing of band gap of TiO₂.     

Photocatalytic oxidation of organic dyes with visible-light-driven codoped TiO2 photocatalysts

A novel copper (II) and zinc (II) codoped TiO₂ photocatalyst was synthesized by a modified sol-gel method using titanium (IV) isopropoxide, Zn(NO₃)₂ · 6H₂O and copper(Il) nitrate as precursors. The samples were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS) and photo-luminescence spectra (PL). The XRD results showed undoped and Zn, Cu-codoped TiO₂ nanoparticles mainly including anatase phase and a tiny amount of Zn- and Cu-oxides exist in the mixed system, which is attributed to the decomposition of copper and zinc nitrates in the TiO₂ gel to form CuO and ZnO and randomly dispersed on the TiO₂ surface. On the basis of the optical characterization results, we found that the codoping of copper (II) and zinc (II) resulted a red shift of adsorption and lower recombination probability between electrons and holes, which were the reasons for high photocatalytic activity of Zn, Cu-codoped TiO₂ nanoparticles under visible light (λ > 400 nm). The photocatalytic activity of samples was tested for degradation of methyl orange (MO) in solutions. The results indicated that the visible-light driven capability of the codoped catalyst were much higher than that of the pure TiO₂ catalyst under visible irradiation. Because of the synergetic effect of copper (II) and zinc (II) element, the Zn, Cu-codoped TiO₂ catalyst will show higher quantum yield and enhance absorption of visible light. In the end, a key mechanism was proposed in order to account for the enhanced activity.     

CdS/TiO2纳米管复合结构的制备与光电性能研究

利用阳极氧化法在钛金属基底表面制备一层TiO2纳米管阵列薄膜,然后通过水热反应在TiO2纳米管上负载CdS纳米粒子,形成CdS/TiO2纳米管的复合结构。利用SEM、XRD、XPS、UV-Vis等手段对其形貌和结构进行表征。进一步考察了CdS/TiO2纳米管的光电性能和光催化活性,结果表明,相比于TiO2纳米管,CdS/TiO2纳米管复合结构在紫外光和可见光下都具有更好的光催化活性及光电性能。     

铋掺杂二氧化钛纳米颗粒的制备及其可见光催化性能

采用水热法,以纳米管钛酸为前驱物制备了Bi掺杂的TiO₂,并利用X射线衍射、透射电子显微镜、X射线光电子能谱、紫外-可见漫反射光谱等手段对样品进行了表征. 以甲基橙的光催化降解为模型反应评价了样品的可见光催化性能. 结果表明,Bi离子并没有进入TiO₂的晶格中,而是以BiOCl的形式存在. 所制得的BiOCl/TiO₂复合物对甲基橙降解表现出较优越的可见光催化活性;当Bi/Ti摩尔比为1%,水热温度为130℃时,所制催化剂的光催化性能最佳,并对光催化活性提高的机理进行了讨论. 同时,该催化剂对4-氯苯酚降解也表现出较高的光催化性能.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

Preparation and characterization of silver and indium vanadate co-doped TiO2 thin films as visible-light-activated photocatalyst

Novel visible-light-activated photocatalytic Ag/InVO₄-TiO₂ thin films were developed in this paper through a sol-gel method from the TiO₂ sol containing Ag and InVO₄. The photocatalytic activities of Ag/InVO₄-TiO₂ thin films were investigated based on the oxidation decomposition of methyl orange in aqueous solution. The Ag/InVO₄-TiO₂ thin films were characterized by X-Ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy (UV-vis). The results revealed that the Ag/InVO₄-TiO₂ thin films extended the light absorption spectrum toward the visible region; the Ag and InVO₄ co-doped thin films significantly enhanced the methyl orange photodegradation under visible light irradiation. It has been confirmed that the Ag/InVO₄-TiO₂ thin films could be excited by visible light (E < 3.2 eV). The significant enhancement in the Ag/InVO₄-TiO₂ photo activity under visible light irradiation can be ascribed to the simultaneous effects of doped noble metal Ag by acting as electron traps and InVO₄ as narrow band gap sensitizer.