Relative energy of organic compounds II. Halides, nitrogen, and sulfur compounds

The energies of the following types of compounds are characterized by their calculated relative enthalpies: alkyl, alkenyl, and aryl halides; carboxylic acid halides; carbonyl halides; amines; carboxylic acid amides; hydrazine derivatives; nitriles; heteroaromatic compounds; nitro-compounds; organic nitrites and nitrates; organic sulfides; thiols; disulfides; sulfoxides; sulfones; organic sulfites and sulfates; and selected inorganic compounds. Stabilization energy of pyrrol and thiophene has been estimated.     

A convenient and efficient preparation of β-substituted α-haloenones from diazodicarbonyl compounds

Rhodium(II)-catalyzed reactions of cyclic diazodicarbonyl compounds with a variety of halides have been examined. With acid halides, β-acyloxy α-haloenones are produced in good yields. With benzyl halides, β-benzyloxy α-haloenones are obtained in good yields. Reactions with methylene halides yield β-halomethoxy α-haloenones in good yields, whereas reactions with ethyl halides and ethylene dihalides result in β-hydroxy α-haloenones in high yields. These reactions provide a useful and rapid entry to β-substituted α-haloenones. The mechanistic pathway for the formation of these products has been also described in terms of halonium ylides.     

Enthalpies of reaction and reaction rates by flow microcalorimetry: Ester hydrolysis in basic medium

The conditions under which the Picker flow microcalorimeter can be used to measure enthalpies and rates of reactions were investigated. For this purpose, systematic studies were made of the enthalpies of neutralization of HCl, HBr, HNO ₃ , acetic, proprionic, and butyric acids with NaOH, enthalpies of hydrolysis of methyl and ethyl acetate with NaOH, and the reaction rates of the ester hydrolysis with NaOH. The general procedure and various sources of error are discussed and it is concluded that enthalpies of slow reactions can be measured to about 1% when the calorimeter is operated in the quasi-isothermal mode and the reaction rates to about 3% when operated in the quasi-adiabatic mode.On leave from Laboratoire de Thermodynamique et de Cinétique Chimique, Université de Clermont 2, Aubière 63170, France.     

Enthalpies of solution of n-alcohols in formamide and ethylene glycol

The enthalpies of solution of 1-pentanol, 1-hexanol and 1-heptanol and water were determined in formamide and in ethylene glycol, at 25‡C, by macrosolution calorimetry. The observed enthalpies of solution for the n-alcohols are positive in the two solvents, and of similar magnitude. The enthalpy of solution of water is positive in formamide, and negative in ethylene glycol. From the enthalpies of solution, the enthalpies of solvation and the enthalpies of transfer for organic solvent↿ water were calculated. Using our values and literature data for alkanols, it was possible to see that both the enthalpies of solution and the enthalpies of solvation presented a constant CH₂ increment for the entire series, in contrast with their behavior in water. The methylene increments for these properties in different solvents are compared with parameters considered to reflect the cohesive energy of the solvent.     

Arylsulfonate-based nucleophile assisting leaving groups

[Chemical reaction: See text] The synthesis and unique reactivity of a series of arylsulfonate-based nucleophile assisting leaving groups (NALG) containing oligomeric ether units (including crown ethers) attached to the arylsulfonyl ring in the ortho orientation are described. The reactions of a variety of these ether-containing alkyl sulfonates with metal halides proceeded at substantially greater rates than electronically similar sulfonates. These ether-containing leaving groups also displayed marked selectivity for lithium halides relative to the corresponding sodium and potassium salts in nucleophilic displacement reactions.     

The enthalpies and entropies of dilution of alkali halides and tetraalkylammonium halides in N-methylacetamide

The enthalpies of dilution of some alkali and tetraalkylammonium halides have been measured in N-methylacetamide at 35°C. The results approach the Debye-Hückel limiting law at low concentrations. Excess free energies and entropies were calculated from the present results and previous freezing point measurements. The excess enthalpies of the alkali halides in N-methylacetamide are in the same range as the excess enthalpies in water. The effect of changing anions is quite small in N-methylacetamide. The cation order is Li⁺?Na⁺>Cs⁺>K⁺. The excess enthalpies of the tetraalkylammonium halides in N-methylacetamide are very different from the excess enthalpies in water, confirming the conclusion that in water the large excess enthalpies are due to hydrophobic bonding and that in N-methylacetamide this effect is not present.     

Thermochemical database of Halomethanes, Halosilanes, Halophosphines, and Haloamines

An accurate thermochemical database for 28 halides of carbon, silicon, nitrogen, and phosphorus is presented. The database provides improved standard enthalpies of formation for several compounds of ecological importance (CH3F, CF2Cl2, CFCl3) together with enthalpies of other compounds which are not known due to experimental difficulties in measuring their enthalpies. We also present a comparison of the latest ab initio methods (CBS-QB3 and G3) which are used for thermochemical predictions. The comparison shows that the G3 method consistently underestimates delta H degree f by 1-2 kJ/mol (relative to CBS-QB3).     

Synthesis of thiophene derivatives via palladium-catalyzed coupling reactions

Thiophene derivatives with multiple substitutions are prepared from vinylidene bromide, which is synthesized by the reaction of thiophene-2-carboxaldehyde with carbon tetrabromide in the presence of PPh₃, as a core molecule through several coupling reactions such as Suzuki-Miyaura coupling and palladium-catalyzed CH arylation. The reactions with a wide variety of organic halides lead to a series of substituted thiophene derivatives in moderate to good yields.     

Thermal characteristics of solid-solid phase transitions in long-chain dialkyl ammonium salts

A series of symmetrical dialkyl ammonium salts, DC_nX, has been prepared and characterized with respect to temperature and enthalpy of solid-solid phase transitions, temperature of melting, thermal stability as well as the reversibility of the phase transitions. The number of carbon atoms, C_n, was varied between 8 and 18 and as anions X halides, nitrate, chlorate, perchlorate and hydrogen sulphate had been chosen. In dependence on chain length and anion type transition temperatures from 20 to 100 °C were observed. Mass specific solid-solid transition enthalpies reach values of 185 J g⁻¹, which makes this class of substances attractive for heat storage applications. The influence of anion type on the transition enthalpies is explained in terms of packing requirements, hydrogen bond network formation and contributions from hindered anion rotation.     

Estimation of dissociation energies of C—H bonds in oxygen-containing compounds from kinetic data for radical abstraction reactions

The C—H bond dissociation energies were calculated on the basis of the parabolic model from the rate constants of free radical reactions for more than 160 oxygen-containing compounds. The enthalpies of formation of free radicals formed from these compounds were calculated. The method was modified taking into account the influence of functional groups on the partial rate constant and for the case when the reference reaction in the reaction series belongs to another class of structurally similar reactions.     

Copper-catalyzed N-arylation of imidazoles and benzimidazoles

4,7-Dimethoxy-1,10-phenanthroline (L1c) was found to be an efficient ligand for the copper-catalyzed N-arylation of imidazoles and benzimidazoles with both aryl iodides and bromides under mild conditions. Further optimization of the system has revealed that the addition of poly(ethylene glycol) accelerates this reaction. A variety of hindered and functionalized imidazoles, benzimidazoles, and aryl halides were transformed in good to excellent yields. Heteroaryl halides were also coupled in moderate to good yields. We also present the results obtained from a series of coupling reactions, which directly compare the use of L1c with other recently reported ligands.     

An efficient regioselective copper catalyzed multi-component synthesis of 1,3-disubstituted pyrazoles

An efficient synthesis of unsymmetrically substituted 1,3-pyrazole derivatives has been developed via three-component coupling reaction involving 3-(dimethylamino)-1-phenylprop-2-en-1-one, hydrazine, and aryl halides in one pot process exhibiting high regioselectivity. The pyrazole synthesis proceeds via a sequential series of reactions such as Michael addition, heterocyclization, dehydration, and Ullmann cross-coupling.     

Rapid room temperature Buchwald-Hartwig and Suzuki-Miyaura couplings of heteroaromatic compounds employing low catalyst loadings

The use of second-generation [(NHC)Pd(R-allyl)Cl] complexes for Suzuki-Miyaura and Buchwald-Hartwig cross-coupling reactions involving heteroaromatic halides at room temperature is reported. The first examples of room temperature Suzuki-Miyaura cross-coupling of deactivated aryl chlorides with alkenyl boronic acids are also disclosed. Terminal substitution at the allyl moiety of the palladium complex facilitates its activation at room temperature leading to very active catalytic species enabling the present catalytic transformations to be performed rapidly using very mild reaction conditions. Catalyst loadings can be as low as 10 ppm for the Buchwald-Hartwig aryl amination and 50 ppm for the Suzuki-Miyaura reaction.     

A determination of antioxidant efficiencies using ESR and computational methods

Using Transition-State Theory, experimental rate constants, determined over a range of temperatures, for reactions of Vitamin E type antioxidants are analysed in terms of their enthalpies and entropies of activation. It is further shown that computational methods may be employed to calculate enthalpies and entropies, and hence Gibbs free energies, for the overall reactions. Within the linear free energy relationship (LFER) assumption, that the Gibbs free energy of activation is proportional to the overall Gibbs free energy change for the reaction, it is possible to rationalise, and even to predict, the relative contributions of enthalpy and entropy for reactions of interest, involving potential antioxidants. A method is devised, involving a competitive reaction between *CH3 radicals and both the spin-trap PBN and the antioxidant, which enables the relatively rapid determination of a relative ordering of activities for a series of potential antioxidant compounds, and also of their rate constants for scavenging *CH3 radicals (relative to the rate constant for addition of *CH3 to PBN).     

过渡元素卤化物标准生成焓的连接性拓扑研究

基于邻接矩阵和成键原子的价环值（Ｖ１）,建立２个新连接性指数（＾０Ｈ,＾１Ｈ）。它们与３３种过渡元素卤化物标准生成焓的直线方程为：－△Θｍ＝－３８．３９＋２２８．０８＾０Ｈ,ｒ＝０．９９０３－△ｆＨΘｍ＝１２７．４５＋３１８．５０＾１Ｈ,ｒ＝０．９８４０与其它指数相比,新指数计算更为准确。结果表明,＾０Ｈ、＾１Ｈ具有良好的结构选择性和性质相关性,可用于预测其它过渡元素卤化物的标准生成焓。     

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate) catalyzed Suzuki, Heck, Sonogashira, and cyanation reactions

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate): a structurally well-defined O-containing transition metal complex is reported as an efficient catalyst for Suzuki, Heck, and Sonogashira cross-coupling reactions. The protocol was also applied successfully for cyanation of aryl halides under milder operating conditions. The system tolerated the coupling of various aryl halides with alkenes, alkynes, and organoboronic acid along with the cyanation of aryl halides providing good to excellent yields of desired products.     

Thermodynamic and ab initio analysis of the controversial enthalpy of formation of formaldehyde.

There are two values, -26.0 and -27.7 kcal mol(-1), that are routinely reported in literature evaluations for the standard enthalpy of formation, Delta(f) H(o)(298), of formaldehyde (CH(2)=O), where error limits are less than the difference in values. In this study, we summarize the reported literature for formaldehyde enthalpy values based on evaluated measurements and on computational studies. Using experimental reaction enthalpies for a series of reactions involving formaldehyde, in conjunction with known enthalpies of formation, its enthalpy is determined to be -26.05+/-0.42 kcal mol(-1), which we believe is the most accurate enthalpy currently available. For the same reaction series, the reaction enthalpies are evaluated using six computational methods: CBS-Q, CBS-Q//B3, CBS-APNO, G2, G3, and G3B3 yield Delta(f) H(o)(298)=-25.90+/-1.17 kcal mol(-1), which is in good agreement to our experimentally derived result. Furthermore, the computational chemistry methods G3, G3MP2B3, CCSD/6-311+G(2df,p)//B3LYP/6-31G(d), CCSD(T)/6-311+G(2df,p)//B3LYP/6-31G(d), and CBS-APNO in conjunction with isodesmic and homodesmic reactions are used to determine Delta(f) H(o)(298). Results from a series of five work reactions at the higher levels of calculation are -26.30+/-0.39 kcal mol(-1) with G3, -26.45+/-0.38 kcal mol(-1) with G3MP2B3, -26.09+/-0.37 kcal mol(-1) with CBS-APNO, -26.19+/-0.48 kcal mol(-1) with CCSD, and -26.16+/-0.58 kcal mol(-1) with CCSD(T). Results from heat of atomization calculations using seven accurate ab initio methods yields an enthalpy value of -26.82+/-0.99 kcal mol(-1). The results using isodesmic reactions are found to give enthalpies more accurate than both other computational approaches and are of similar accuracy to atomization enthalpy calculations derived from computationally intensive W1 and CBS-APNO methods. Overall, our most accurate calculations provide an enthalpy of formation in the range of -26.2 to -26.7 kcal mol(-1), which is within computational error of the suggested experimental value. The relative merits of each of the three computational methods are discussed and depend upon the accuracy of experimental enthalpies of formation required in the calculations and the importance of systematic computational errors in the work reaction. Our results also calculate Delta(f) H(o)(298) for the formyl anion (HCO(-)) as 1.28+/-0.43 kcal mol(-1).     

盐湖盐类水溶液298.15K时稀释热和表观摩尔焓的研究

有关溶稀释热方面的研究报导很多,例如等溶液的稀释热均已有文献值．但全是采用分批式量热法研究部分间断浓度范围内的稀释热，数据设有连续性，很不全面．在稀释热理论估算方面，Pitier的半经验溶液理论能比较满意的解决一般浓溶液的稀释热估算问题，但文献只给出了某些多数，没有计算出具体的稀释热数据[6-9]，也没有将实验测定值与理论估算值相比较．基于Debye－Hckel理论推导出的烙极限公式[10-12]在溶液表观摩尔烂的研究中已得到广泛应用．但迄今没有一篇论文比较全面地将实验测定与Pitier理论和Debye－Hhdel极限公式相结合来研究溶…     

Are calculated enthalpies of formation sometimes more reliable than experimental? A test on alkyl substituted benzoic acids

Energies of 20 alkyl-substituted benzoic acids were calculated at the levels B3LYP/6-311+G(d,p)//B3LYP/6-311+G(d,p) and MP2/6-311+G(d,p)//MP2/6-311+G(d,p); the pertinent enthalpies at 298 K were calculated at the same levels. Comparison with experimental enthalpies of formation Delta(f)H degrees (g)(298) was carried out in terms of isodesmic reactions, that is, in the relative values. Of the four calculated quantities, the DFT enthalpies yielded best correlation with the standard deviation of 2.1 kJ mol(-1), near to the experimental uncertainty; the DFT energies are only slightly worse and the MP2 enthalpies or energies much worse. However, the DFT method overestimated systematically the substituent effects and had to be calibrated. Comparison with the experimental gas-phase acidities was less telling and the fit was worse because both methods overestimated the substituent effects. Extending the base in selected examples did not give better results. Although the systematic deviations are evidently due to the imperfections of the theoretical models, individual big deviations should be attributed to experimental errors or to the abnormal behavior of certain compounds at the experimental conditions. From this point of view, three examples of the so-called long-range effect claimed in the case of different benzoic acid derivatives, always for substituents in the meta position, must be refused as unproven because the experimental energies were not confirmed by calculations.     

Geometric parameters of transition states of radical abstraction reactions with C...H...C reaction center

An algorithm of calculations of interatomic distances in the transition states (TS) of reactions of hydrogen abstraction by alkyl, allyl, and benzyl radicals from C—H bonds of organic molecules using the enthalpies of the corresponding reactions is proposed. The geometric parameters of the TS of the reactions involving carbon-centered radicals with the C...H...C reaction center, calculated using experimental data, are compared with other characteristics of the reactions and reactants. The r(C...H...C) distance in the TS of the reactions of alkyl radicals with alkanes remains unchanged as the enthalpies of reactions vary, being a characteristic parameter of a given class of reactions. -Bonds adjacent to the reaction center are responsible for an increase in the parameter r(C...H...C) in the TS.