以镍为阴极由二氧化碳与芳香酮电合成α-羟基羧酸

室温下,在一室电解池中,以n-Bu4NBr-DMF作电解质、镍为阴极、铝为阳极,恒电流电解二氧化碳与芳香酮（苯乙酮、对二苯甲酮、6-甲氧基-2-萘乙酮、4-甲基苯乙酮和4-甲氧基苯乙酮）,可以得到相应的α-羟基羧酸（产率56%-90%）。实验结果显示,阴极材料、芳香族酮的结构以及电解条件（如电量、底物浓度、导电盐、溶剂和二氧化碳压力等）对目标产物的产率有很大影响;反应系统中质子剂（水）的存在将导致副产物频哪醇的生成。本文还根据循环伏安实验和合成实验结果简要地讨论了反应机理。     

Efficient Electrocarboxylation of p-Methylpropiophenone in the Presence of Carbon Dioxide

In the one compartment electrochemical cell 2‐hydroxy‐2‐p‐tolyl‐butyric acid methyl ester was electrosynthesized by electrochemical carboxylation of p‐methylpropiophenone in the presence of carbon dioxide. Under galvanostatic conditions, the electrocarboxylation was influenced by supporting electrolytes, cathode materials, the current density, passed charge and temperatures. Application scope of the eletrocarboxylation system was then examined, and an excellent yield of 97% was obtained when the electrolysis was carried out in DMF‐0.1 mol·L^?1 TEABr solution using cheap and environmentally benign nickel as the cathode under a controlled current density of 5.0 mA·cm^?2 until 2.8 F·mol^?1 charge passed through the cell at ?10°C. The electrochemical behavior of p‐methoxylacetophenone has been studied on the glassy carbon electrode by cyclic voltammetry and the probable mechanism was proposed accordingly.     

四苯基卟啉钴催化有机化合物与二氧化碳的电羧化反应Ⅱ.

研究了α、β、γ、δ－四苯基卟啉钴（ＣｏＴＰＰ）存在下苄基氯、苯乙酮、二苯甲酮和萘等与ＣＯ＿２的电羧化反应，与无催化剂体系相比，ＣｏＴＰＰ可使这些有机化合物与ＣＯ＿２电羧化反应的过电位降低约８００～１０００ｍＶ，对反应有较高的催化活性．用ＵＶ，ＩＲ和ＧＣ－ＭＳ确认了电羧化产物，并探讨了ＣｏＴＰＰ催化反应机理．     

Electronic Structure Engineering of Carbon Nitride Materials by Using Polycyclic Aromatic Hydrocarbons

The design of charge separation sites under illumination in semiconductors is a standing challenge for their utilization as photo(electro)catalysts. Here, the synthesis of modified carbon nitride materials (CNs) with donor–acceptor (D–A) domains, with altering electronic structure, is reported. To do so, new monomers based on polycyclic aromatic hydrocarbons (PAH)-substituted 1,3,5-triazine were designed, which were then embedded within cyanuric acid–melamine supramolecular assemblies to form CN precursors. The conjugation degree of PAHs was systematically changed, from single benzene ring up to pyrene unit, elucidating the role of the conjugation degree on the morphology, structure and electronic properties as well as photo(electro)catalytic activity. The careful design of the D–A sites results in excellent photocatalytic activity as well as long-term stability for the hydrogen evolution reaction. Moreover, PAH–CNs films exhibit enhanced charge separation, optical absorption, electrochemical surface area and electronic conductivity, leading to an outstanding photoelectrochemical (PEC) activity compared to pristine CN.     

二氧化碳与不饱和烃的还原羧化反应

过渡金属催化CO₂参与的不饱和烃还原羧化反应是合成羧酸及丙烯酸类化合物的重要途径, 具有重要的研究价值和工业应用潜力．过渡金属试剂与不饱和烃、CO₂生成稳定的金属杂环内酯或金属羧酸盐．还原剂能够与金属杂环内酯或金属羧酸盐发生转金属作用, 重新生成活泼催化剂, 从而实现催化剂的循环利用．本文总结了还原剂, 包括有机金属试剂、硅烷、硼烷、金属粉末、甲醇和氢气等在不饱和烃与CO₂的还原羧化反应中的应用, 并着重描述其反应特点和反应机理.     

Methane Conversion to Higher Hydrocarbons in the Presence of Carbon Dioxide Using Dielectric-Barrier Discharge Plasmas

Experimental investigation has been conducted to convert methane into higher hydrocarbons in the presence of carbon dioxide within dielectric-barrier discharge (DBD) plasmas. The objectives of cofeed of carbon dioxide are to inhibit carbon deposit and to increase methane conversion. The products from this plasma methane conversion include: (1) syngas (H₂+CO), (2) gaseous hydrocarbons containing ethylene, acetylene, and propylene, (3) liquid hydrocarbons, (4) plasma-polymerized film, and (5) oxygenates. The selectivity of products is subject to the DBD plasma-reactive conditions and catalyst applied. The liquid hydrocarbons produced by this way are highly branched, which represents a better fuel production.     

Synthetic Strategies of Carbon Nanobelts and Related Belt-Shaped Polycyclic Aromatic Hydrocarbons

The development of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons has gained momentum in recent years. This Minireview focuses on the synthetic strategies used in constructing these aesthetically appealing molecular nanocarbons. Examples of carbon nanobelts and related belt-shaped polycyclic aromatic hydrocarbons reported in recent years as well as some representative synthetic attempts in earlier times are discussed.     

Carbon Dioxide Fixation Method for Electrosynthesis of Benzoic Acid from Chlorobenzene

Carbon dioxide fixation technique was developed as an alternative dechlorination method of chlorobenzenes.Electrolysis of chlorobenzene was carried out in a one-compartment cell fitted with an alu- minium anode and a platinum cathode.Electrolysis in N,N-dimethylformamide(DMF)solution contain- ing 0.1 M of tetrapropylammonium bromide(TPAB)at 0℃,100 ml/min of CO_2 flow rate and 120 mA/cm~2 of current density was found to be the optimum conditions of this electrocarboxylation,which gave 72% yield of benzoic acid from chlorobenzene.These conditions were then applied to 1,2-dichlorobenzene and 1,3-dichlorobenzene in order to convert them to their corresponding benzoic acids.     

Carbon Dioxide Capture and Use: Organic Synthesis Using Carbon Dioxide from Exhaust Gas

A carbon capture and use (CCU) strategy was applied to organic synthesis. Carbon dioxide (CO₂) captured directly from exhaust gas was used for organic transformations as efficiently as hyper‐pure CO₂ gas from a commercial source, even for highly air‐ and moisture‐sensitive reactions. The CO₂ capturing aqueous ethanolamine solution could be recycled continuously without any diminished reaction efficiency.     

金属二氧化碳电池的研究进展

化石燃料的大量使用造成二氧化碳排放与日俱增和气候严重恶化,为了解决这一问题,科学家们通过各种物理和化学方法来降低大气中二氧化碳的含量,但是效果并不是很明显.金属二氧化碳电池既能够捕捉二氧化碳,还可以作为清洁的储能装置,同时对金属二氧化碳电池的开发与研究也推动着电动汽车产业向更加经济、环保、可持续的方向发展.基于上述优点,金属二氧化碳电池近几年迅速发展.主要介绍了锂、钠、铝、镁二氧化碳电池的研究进展,并对锂、钠二氧化碳/氧气电池的电化学性能进行对比,提出了目前金属二氧化碳电池所面临的问题,并给出了解决方案.最后,评述了金属二氧化碳电池未来的发展方向.     

二氧化碳参与的有机化学反应*

由于对日趋严重的温室效应的担忧,对廉价二氧化碳的固定和转化成为一个非常有吸引力的研究领域。本文主要介绍了二氧化碳参与的有机化学反应,包括与环氧化合物、胺类化合物、不饱和碳氢化合物以及醇类和烃类等化合物的反应。文章分别对这几类反应的发展历程、研究现状进行了总结,重点介绍了各反应所用到的催化剂体系及有关反应机理,并展望了该领域的研究前景。     

Solid-Phase Extraction of Polycyclic Aromatic Hydrocarbons Using Polymer Sorbents

Adsorption properties of polymer sorbents of the Styrosorb type in the preconcentration of polycyclic aromatic hydrocarbons from aqueous solutions were studied. Optimal conditions of extraction were determined. It was found that naphthalene and phenanthrene are most efficiently extracted with these sorbents.     

Electrocarboxylation of Acetophenone to 2‐Hydroxy‐2‐phenylpropionic Acid in the Presence of CO2

Electrocarboxylation of acetophenone with CO₂ to obtain 2‐hydroxy‐2‐phenylpropionic acid was carried out in acetonitrile solution containing 0.1 mol·L^?1 tetraethylammonium bromide. Influences of the nature of the electrodes, the working potential, the passed charge and the concentration of acetophenone on the electrocarboxylation were studied. After optimizing the synthetic parameters, the maximal isolated yield reached 73.0% on Mg‐stainless steel couple electrodes under potentiostatic electrolysis until 2.2 F·mol^?1 of charge was passed at 25 °C. The reduction of acetophenone was studied by cyclic voltammetry and the mechanism has been proposed on the basis of the results.     

活性炭纤维改性对ACF-SPME技术分析多环芳烃的影响

活性炭纤维经改性剂浸渍,水蒸气高温活化后,增大了其对水中多环芳烃的选择性和吸附量,提高了检出限。活性炭纤维活化的最佳条件:在45%磷酸中浸渍6 h,水蒸气中活化30 min,活化温度为500℃。与未改性炭纤维相比,改性后的炭纤维经固相微萃取技术与气相色谱联用测定16种多环芳烃(PAHs),检出限由0.5~50μg/L降至0.01~0.5μg/L,加标回收率由46%~112%增至74%~124%。方法的灵敏度和准确性得到明显的改善,提高了该技术的实际应用价值。     

Electrochemical Reduction of Carbon Dioxide to Value‐Added Products: The Electrocatalyst and Microbial Electrosynthesis

The electrochemical reduction of carbon dioxide (CO₂) to value‐added products obtains great attention and investigation worldwide in recent years. The commercialization of this green process relies on the progress of relating high‐performance electrocatalysts and their feasibility with proper reactor design. The microbial electrosynthesis (MES) is an alternative route to reduce CO₂ with electroactive bio‐film electrode as catalyst. This review presents the research status and development of cathode catalysts, particularly focusing on the active sites and development tendency, for highly efficient electrochemical reduction CO₂ from personal viewpoint. Some of our results are also presented to exhibit contributions. MES shows a similar process to the typical electrochemical reduction of CO₂. Their combination is an important trend, and the future research in this field is full of challenges and opportunities.     

二氧化碳气体制备层状聚苯乙烯发泡材料

将珠状和粒状聚苯乙烯(PS)样品模压后在高压CO₂条件下饱和, 采取快速升温法制备了结构新颖的层状发泡材料. 通过扫描电子显微镜(SEM)以及不同饱和条件下CO₂在PS中溶解度的分析, 初步研究了区域性弱链段缠结力对气体成核、泡孔形态、泡孔尺寸和分布的影响. 结果表明珠状PS在压制成型过程中其珠粒界面链段相互作用力较弱. 由于基体中界面区域链段的缠结能力不同, 在不同区域CO₂气体的成核和增长也不同, 通过控制发泡的过程参数, 可以得到独特的PS层状泡孔形态.     

Microfluidic Studies of Carbon Dioxide

Carbon dioxide (CO₂) sequestration, storage and recycling will greatly benefit from comprehensive studies of physical and chemical gas–liquid processes involving CO₂. Over the past five years, microfluidics emerged as a valuable tool in CO₂‐related research, due to superior mass and heat transfer, reduced axial dispersion, well‐defined gas–liquid interfacial areas and the ability to vary reagent concentrations in a high‐throughput manner. This Minireview highlights recent progress in microfluidic studies of CO₂‐related processes, including dissolution of CO₂ in physical solvents, CO₂ reactions, the utilization of CO₂ in materials science, and the use of supercritical CO₂ as a “green” solvent.     

四元Mg0.9Ti0.1Ni0.9X0.1(X=Mn,Zn,Co,Fe)系列合金的制备及性能研究

用机械合金化法合成了Mg0.9Ti0.1Ni0.9X0.1(X=Mn,Zn,Co,Fe)系列合金.X射线衍射(XRD)结构分析表明,用X部分替代Ni后,促进了Mg0.9Ti0.1Ni合金的非晶化过程.用Co和Fe部分替代Ni提高了合金的放电容量,但却降低了合金的循环稳定性.用Zn和Mn部分替代Ni提高了合金电极的循环寿命,尤其是Mg0.9Ti0.1Ni0.9Zn0.1合金电极经10个充放电循环后,其放电容量仍可达到313.8mA.h/g.对添加Co后的合金进行p-c-T测试发现,Mg0.9Ti0.1Ni0.9Co0.1合金的吸放氢容量明显比Mg0.9Ti0.1Ni合金高,这与电化学所测到的结果一致.