Binuclear iron-sulfur complexes with bidentate phosphine ligands as active site models of Fe-hydrogenase and their catalytic proton reduction

The displacement of CO in a few simple Fe(I)-Fe(I) hydrogenase model complexes by bisphosphine ligands Ph2P-(CH2)n-PPh2 [with n = 1 (dppm) or n = 2 (dppe)] is described. The reaction of [{mu-(SCH2)2CH2}Fe2(CO)6] (1) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)6] (2) with dppe gave double butterfly complexes [{mu-(SCH2)2CH2}Fe2(CO)5(Ph2PCH2)]2 (3) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5(Ph2PCH2)]2 (4), where two Fe2S2 units are linked by the bisphosphine. In addition, an unexpected byproduct, [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5{Ph2PCH2CH2(Ph2PS)}] (5), was isolated when 2 was used as a substrate, where only one phosphorus atom of dppe is coordinated, while the other has been converted to P=S, presumably by nucleophilic attack on bridging sulfur. By contrast, the reaction of 1 and 2 with dppm under mild conditions gave only complexes [{mu-(SCH2)2CH2}Fe2(CO)5(Ph2PCH2PPh2)] (6) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)5(Ph2PCH2PPh2)] (8), where one ligand coordinated in a monodentate fashion to one Fe2S2 unit. Furthermore, under forcing conditions, the complexes [{mu-(SCH2)2CH2}Fe2(CO)4{mu-(Ph2P)2CH2}] (7) and [{mu-(SCH2)2N(CH2CH2CH3)}Fe2(CO)4{mu-(Ph2P)2CH2}] (9) were formed, where the phosphine acts as a bidentate ligand, binding to both the iron atoms in the same molecular unit. Electrochemical studies show that the complexes 3, 4, and 9 catalyze the reduction of protons to molecular hydrogen, with 4 electrolyzed already at -1.40 V versus Ag/AgNO3 (-1.0 V vs NHE).     

Solid state coordination chemistry of the copper(ii)-terpyridine/oxovanadium organophosphonate system: hydrothermal syntheses, structural characterization and magnetic properties

The hydrothermal reactions of CuSO4.5H2O, Na3VO4, 2,2':6':2'-terpyridine (terpy), and the appropriate organophosphonate ligand yield a series of materials of the Cu(ii)-terpy/oxovanadium organophosphonate family. The complexes exhibit distinct structures spanning one-, two- and three-dimensions and exhibiting diverse oxovanadium building blocks. Thus, [{Cu(terpy)}(V2O4)(O3PPh)(HO3PPh)2] (1) is one-dimensional and constructed from binuclear units of corner-sharing V(v) square pyramids. While [{Cu(terpy)}VO(O3PCH2PO3)] (2), [{Cu(terpy)}2(V4O10)(O3PCH2CH2PO3)] (3), and [{Cu(terpy)}(V2O4){O3P(CH2)3PO3}].2.5H(2)O (4.2.5H2O) are similarly one-dimensional, the V/O structural components consist of isolated V(iv) square pyramids, tetranuclear V(v) units of three tetrahedra and one square pyramid in a corner-sharing arrangement, and isolated V(v) tetrahedra and square pyramids, respectively. The second propylenediphosphonate derivative, [{Cu(terpy)}(V2O4){O3P(CH2)3PO3}] (5) is three-dimensional and exhibits isolated V(v) tetrahedra as the vanadate component. The two-dimensional structure of [{Cu(terpy)(H2O)}(V3O6){O3P(CH2)4PO3}] (6) is mixed valence with isolated V(iv) square pyramids and binuclear units of corner-sharing V(v) tetrahedra providing the V/O substructures.     

Copper-dioxygen adducts and the side-on peroxo dicopper(II)/bis(mu-oxo) dicopper(III) equilibrium: Significant ligand electronic effects

The variation of ligand para substituents on pyridyl donor groups of tridentate amine copper(I) complexes was carried out in order to probe electronic effects on the equilibrium between mu-eta2:eta2-(side-on)-peroxo [Cu(II)2(O2(2-))]2+ and bis(mu-oxo) [Cu(III)2(O(2-))2] species formed upon reaction with O2. [Cu(I)(R-PYAN)(MeCN)n]B(C6F5)4 (R-PYAN = N-[2-(4-R-pyridin-2-yl)-ethyl]-N,N',N'-trimethyl-propane-1,3-diamine, R = NMe2, OMe, H, and Cl) (1R) vary over a narrow range in their Cu(II)/Cu(I) redox potentials (E(1/2) vs Fe(cp)2(+/0) = -0.40 V for 1(NMe2), -0.38 V for 1(OMe), -0.33 V for 1H, and -0.32 V for 1Cl) and in C-O stretching frequencies of their carbonyl adducts, 1R-CO: nu(C-O) = 2080, 2086, 2088, and 2090 cm(-1) for R = NMe2, OMe, H, and Cl, respectively. However, within this range of electronic properties for 1R, dioxygen reactivity is significantly affected. The reaction of 1Cl or 1H with O2 at -78 degrees C in CH2Cl2 gives UV-vis and resonance Raman spectra indicative of a mu-eta2:eta2-(side-on)-peroxo dicopper(II) adduct (2R). Compound 1(OMe) reacts with O2, yielding equilibrium mixtures of side-on peroxo (2(OMe)) and bis(mu-oxo) (3(OMe)) species. Oxygenation of 1(NMe2) leads to the sole generation of the bis(mu-oxo) dicopper(III) complex (3(NMe2)). A solvent effect was also observed; in acetone or THF, increased ratios of bis(mu-oxo) relative to side-on peroxo complex are observed. Thus, the equilibrium between a dicopper side-on peroxo and bis(mu-oxo) species can be tuned by ligand design-specifically, more electron donating ligands favor the formation of the latter isomer, and the peroxo/bis(mu-oxo) equilibrium can be shifted from one extreme to the other within the same ligand system. Observations concerning the reactivity of the dioxygen adducts 2H and 3(NMe2) toward external substrates are also presented.     

Geometric and electronic structures of peroxomanganese(III) complexes supported by pentadentate amino-pyridine and -imidazole ligands

Three peroxomanganese(III) complexes [Mn(III)(O(2))(mL(5)(2))](+), [Mn(III)(O(2))(imL(5)(2))](+), and [Mn(III)(O(2))(N4py)](+) supported by pentadentate ligands (mL(5)(2) = N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine, imL(5)(2) = N-methyl-N,N',N'-tris((1-methyl-4-imidazolyl)methyl)ethane-1,2-diamine, and N4py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) were generated by treating Mn(II) precursors with H(2)O(2) or KO(2). Electronic absorption, magnetic circular dichroism (MCD), and variable-temperature, variable-field MCD data demonstrate that these complexes have very similar electronic transition energies and ground-state zero-field splitting parameters, indicative of nearly identical coordination geometries. Because of uncertainty in peroxo (side-on η(2) versus end-on η(1)) and ligand (pentadentate versus tetradentate) binding modes, density functional theory (DFT) computations were used to distinguish between three possible structures: pentadentate ligand binding with (i) a side-on peroxo and (ii) an end-on peroxo, and (iii) tetradentate ligand binding with a side-on peroxo. Regardless of the supporting ligand, isomers with a side-on peroxo and the supporting ligand bound in a tetradentate fashion were identified as most stable by >20 kcal/mol. Spectroscopic parameters computed by time-dependent (TD) DFT and multireference SORCI methods provided validation of these isomers on the basis of experimental data. Hexacoordination is thus strongly preferred for peroxomanganese(III) adducts, and dissociation of a pyridine (mL(5)(2) and N4py) or imidazole (imL(5)(2)) arm is thermodynamically favored. In contrast, DFT computations for models of [Fe(III)(O(2))(mL(5)(2))](+) demonstrate that pyridine dissociation is not favorable; instead a seven-coordinate ferric center is preferred. These different results are attributed to the electronic configurations of the metal centers (high spin d(5) and d(4) for Fe(III) and Mn(III), respectively), which results in population of a metal-peroxo σ-antibonding molecular orbital and, consequently, longer M-O(peroxo) bonds for peroxoiron(III) species.     

Electronic structure of a low-spin heme/Cu peroxide complex: spin-state and spin-topology contributions to reactivity

This study details the electronic structure of the heme–peroxo–copper adduct {[(F8)Fe(DCHIm)]-O2-[Cu(AN)]}+ (LS(AN)) in which O2(2–) bridges the metals in a μ-1,2 or “end-on” configuration. LS(AN) is generated by addition of coordinating base to the parent complex {[(F8)Fe]-O2-[Cu(AN)]}+ (HS(AN)) in which the O2(2–) bridges the metals in an μ-η2:η2 or “side-on” mode. In addition to the structural change of the O2(2–) bridging geometry, coordination of the base changes the spin state of the heme fragment (from S = 5/2 in HS(AN) to S = 1/2 in LS(AN)) that results in an antiferromagnetically coupled diamagnetic ground state in LS(AN). The strong ligand field of the porphyrin modulates the high-spin to low-spin effect on Fe–peroxo bonding relative to nonheme complexes, which is important in the O–O bond cleavage process. On the basis of DFT calculations, the ground state of LS(AN) is dependent on the Fe–O–O–Cu dihedral angle, wherein acute angles (<~150°) yield an antiferromagnetically coupled electronic structure while more obtuse angles yield a ferromagnetic ground state. LS(AN) is diamagnetic and thus has an antiferromagnetically coupled ground state with a calculated Fe–O–O–Cu dihedral angle of 137°. The nature of the bonding in LS(AN) and the frontier molecular orbitals which lead to this magneto-structural correlation provide insight into possible spin topology contributions to O–O bond cleavage by cytochrome c oxidase.     

Heterospin systems constructed from [Cu2Ln]3+ and [Ni(mnt)2]1-,2- Tectons: First 3p-3d-4f complexes (mnt = maleonitriledithiolato)

New heterospin complexes have been obtained by combining the binuclear complexes [{Cu(H(2)O)L(1)}Ln(O(2)NO)(3)] or [{CuL(2)}Ln(O(2)NO)(3)] (L(1) = N,N'-propylene-di(3-methoxysalicylideneiminato); L(2) = N,N'-ethylene-di(3-methoxysalicylideneiminato); Ln = Gd(3+), Sm(3+), Tb(3+)), with the mononuclear [CuL(1)(2)] and the nickel dithiolene complexes [Ni(mnt)(2)](q)- (q = 1, 2; mnt = maleonitriledithiolate), as follows: (1)infinity[{CuL(1)}(2)Ln(O(2)NO){Ni(mnt)(2)}].Solv.CH(3)CN (Ln = Gd(3+), Solv = CH(3)OH (1), Ln = Sm(3+), Solv = CH(3)CN (2)) and [{(CH(3)OH)CuL(2)}(2)Sm(O(2)NO)][Ni(mnt)(2)] (3) with [Ni(mnt)2]2-, [{(CH(3)CN)CuL(1)}(2)Ln(H(2)O)][Ni(mnt)(2)]3.2CH(3)CN (Ln = Gd(3+) (4), Sm(3+) (5), Tb(3+) (6)), and [{(CH(3)OH)CuL(2)}{CuL(2)}Gd(O(2)NO){Ni(mnt)(2)}][Ni(mnt)(2)].CH(2)Cl(2) (7) with [Ni(mnt))(2]*-. Trinuclear, almost linear, [CuLnCu] motifs are found in all the compounds. In the isostructural 1 and 2, two trans cyano groups from a [Ni(mnt)2]2- unit bridge two trimetallic nodes through axial coordination to the Cu centers, thus leading to the establishment of infinite chains. 3 is an ionic compound, containing discrete [{(CH(3)OH)CuL(2)}(2)Sm(O(2)NO)](2+) cations and [Ni(mnt)(2)](2-) anions. Within the series 4-6, layers of discrete [CuLnCu](3+) motifs alternate with stacks of interacting [Ni(mnt)(2)](*-) radical anions, for which two overlap modes, providing two different types of stacks, can be disclosed. The strength of the intermolecular interactions between the open-shell species is estimated through extended Hückel calculations. In compound 7, [Ni(mnt)(2)](*-) radical anions coordinate group one of the Cu centers of a trinuclear [Cu(2)Gd] motif through a CN, while discrete [Ni(mnt)(2)](*-) units are also present, overlapping in between, but also with the coordinated ones. Furthermore, the [Cu(2)Gd] moieties dimerize each other upon linkage by two nitrato groups, both acting as chelate toward the gadolinium ion from one unit and monodentate toward a Cu ion from the other unit. The magnetic properties of the gadolinium-containing complexes have been determined. Ferromagnetic exchange interactions within the trinuclear [Cu(2)Gd] motifs occur. In the compounds 4 and 7, the [Ni(mnt)(2)](*-) radical anions contribution to the magnetization is clearly observed in the high-temperature regime, and most of it vanishes upon temperature decrease, very likely because of the rather strong antiferromagnetic exchange interactions between the open-shell species. The extent of the exchange interaction in the compound 7, which was found to be antiferromagnetic, between the coordinated Cu center and the corresponding [Ni(mnt)(2)](*-) radical anion, bearing mostly a 3p spin type, was estimated through CASSCF/CASPT2 calculations. Compound 6 exhibits a slow relaxation of the magnetization.     

Copper(I) and copper(II) complexes possessing cross-linked imidazole-phenol ligands: structures and dioxygen reactivity

Catalytic reduction of O2 to H2O, and coupling to membrane proton translocation, occurs at the heterobinuclear heme a3-CuB active site of cytochrome c oxidase. One of the CuB ligated histidines is cross-linked to a neighboring tyrosine (C-N bond; tyrosine C6 and histidine epsilon-nitrogen), and the protic residue of this cross-linked His-Tyr moiety is proposed to participate as both an electron and a proton donor in the catalytic dioxygen reduction event. To provide insight into the chemistry of such a moiety, we have synthesized and characterized tetra- and tridentate pyridylalkylamine chelate ligands {LN4OR and LN3OR (R = H or Me)}, which include an imidazole-phenol (or anisole) cross-link and their copper(I/II) complexes. [CuI(LN4OH)]B(C6F5)4 (1) reacts with dioxygen at -80 degrees C in THF, forming an unstable trans-mu-1,2-peroxodicopper(II)complex, which subsequently converts to a dimeric copper(II)-phenolate complex [{Cu(LN4O-)}2](B(C6F5)4)2 (5a). The close analogue [CuI(LN4OMe)]B(C6F5)4 (3) binds dioxygen reversibly at -80 degrees C in tetrahydrofuran. Stopped-flow kinetics of the reaction [CuI(LN3OH)]ClO4 (2) with O2 in CH2Cl2 indicate a steady formation of the purple dimeric product [{Cu(LN3O-)}2](ClO4)2 (5b), which has been analyzed in the temperature range from -40 to +20 degrees C, DeltaH = -9.6 (6) kJ mol-1, DeltaS = -168 (2) J mol-1 K-1 (k(-40 degrees C) = 1.05(4) x 106 and k(+20 degrees C) = 4.6(2) x 105 M-2 s-1). The X-ray crystal structures of 1, [CuII(LN3OH)(MeOH)(OClO3-)](ClO4) (4), 5a, and 5b are reported.     

Gallium hydride complexes stabilised by multidentate alkoxide ligands: precursors to thin films of Ga2O3 at low temperatures

The donor-functionalised alkoxides {Me(3-x)N(CH(2)CH(2)O)(x)} (L(x); x = 1, 2) have been used to form gallium hydride complexes [{GaH(2)(L(1))}(2)] and [{GaH(L(2))}(2)] that are stable and isolable at room temperature. Along with a heteroleptic gallium tris(alkoxide) complex [Ga(L(1))(3)] and the dimeric complex [{GaMe(L(2))}(2)], these compounds have been used as single-source precursors for the deposition of Ga(2)O(3) by aerosol-assisted chemical vapour deposition (AACVD) with toluene as solvent. The resulting films were mostly transparent, indicating low levels of carbon contamination, and they were also mainly amorphous. However, [Ga(L(1))(3)] did contain visibly crystalline material deposited at a substrate temperature of 450?°C, by far the lowest ever observed for the CVD of gallium oxide.     

Electronic tuning of beta-diketiminate ligands with fluorinated substituents: effects on the O2-reactivity of mononuclear Cu(I) complexes

Copper(i) complexes with the beta-diketiminate ligands HC{C(R)N(Dipp)}{C(R')N(Dipp)}(-) (Dipp = C(6)H(3)(i)Pr(2-)2,6; L(1), R = CF(3), R' = CH(3); L(2), R = R' = CF(3)) have been isolated and fully characterized. On the basis of X-ray structural comparisons with the previously reported complex LCu(CH(3)CN) (L = HC{C(CH(3))N(Dipp)}(2)(-)), the ligand environments at the copper centers in the analogous nitrile adducts with L(1) and L(2) impose similar steric demands. L(1)Cu(CH(3)CN) reacts instantaneously at low temperature with O(2) to form a thermally-unstable intermediate with an isotope-sensitive vibration at 977 cm(-1) (928 cm(-1) with (18)O(2)), in accord with the peroxo O-O stretch associated with side-on coordination for LCu(O(2)). However, L(2)Cu(CH(3)CN) is unreactive toward O(2) even at room temperature. Evaluation of the redox potentials of the nitrile adducts and the CO stretching frequencies of the carbon monoxide adducts revealed an incremental adjustment of the electronic environment at the copper center that correlated with the extent of ligand fluorination. Furthermore, theoretical calculations (DFT, CASPT2) predicted that an increasing extent of Cu(ii)-superoxo character and end-on coordination of the O(2) moiety in the Cu/O(2) product (L(2) > L(1) > L) are accompanied by increases in the free energy for the oxygenation reaction, with L(2) unable to support a Cu/O(2) intermediate. Calculations also predict the 1 : 1 Cu/O(2) adducts to be unreactive with respect to hydrogen atom abstraction from hydrocarbon substrates on the basis of their stability towards both reduction and protonation.     

STM/STS observation of polyoxoanions on HOPG surfaces: the wheel-shaped [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- and the ball-shaped [{Sn(CH3)2(H2O)}24{Sn(CH3)2}12(A-PW9O34)12]36-

A combination of scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) techniques have been performed on the wheel-shaped [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- and the ball-shaped [{Sn(CH3)2(H2O)}24{Sn(CH3)2}12(A-PW9O34)12]36- deposited on highly oriented pyrolytic graphite surfaces. Small, regular molecule clusters, as well as separated single molecules, were observed. The size of the molecules is in agreement with the data determined by X-ray crystallography. In STS measurements, we found a rather large contrast at the expected location of the Cu metal centers in our molecules, i.e., the location of the individual Cu ions in their organic matrix is directly addressable by STS.     

Metal phosphonates based on bis(benzimidazol-2-ylmethyl)imino methylenephosphonate: from discrete dimer to two-dimensional network containing metallomacrocycles

Hydrothermal reactions of bis(benzimidazol-2-ylmethyl)imino(methylenephosphonic acid) {[(C(7)H(5)N(2))CH(2)]2NCH(2)PO(3)H(2), bbimpH2} with metal salts result in four new compounds, namely, Mn2{[(C(7)H(5)N(2))CH2]2NCH(2)PO(3)}2(H2O)2.2H2O (1), Cd2{[(C(7)H(5)N(2))CH2]2NCH(2)PO(3)}2.2H2O (2), Fe2{[(C(7)H(5)N(2))CH2]2NCH(2)PO(3)}2.H2O (3), and CuI(2){[(C(7)H(5)N(2))CH2]2NCH(2)P(OH)O2}2 (4). Compounds 1 and 2 have dinuclear structures in which two {MN(3)O(3)} octahedra are linked through edge sharing. In compound 3, a chain structure is observed where the {FeN(3)O(2)} trigonal bipyramids are linked by {CPO(3)} tetrahedra through corner-sharing. The structure of compound 4 is unique. The monovalent Cu(I) ions are connected by the imidazole nitrogen atoms from the bbimp(2-) ligands forming a 16-member metallomacrocycle. These metallomacrocycles are further connected by the phosphonate oxygen atoms, leading to a two-dimensional net containing 16- and 32-member rings. Magnetic studies of 1 and 3 reveal that weak ferromagnetic interactions are mediated between magnetic centers in compound 1, while antiferromagnetic interactions were observed in compound 3.     

Solid state coordination chemistry of metal oxides: structural consequences of fluoride incorporation into the oxovanadium-copper-bisterpy-{O3P(CH2)nPO3}4- system, n= 1-5 (bisterpy = 2,2':4',4":2",2"'-quaterpyridyl-6', 6"-di-2-pyridine)

Hydrothermal reactions of a vanadate source, an appropriate Cu(II) source, bisterpy and an organodiphosphonate, H2O3P(CH2)nPO3H2(n= 1-5), in the presence of HF, yielded a family of materials of the type oxyfluorovanadium/copper-bisterpy/organodiphosphonate. Under similar reaction conditions, variations in diphosphonate tether length n provided the one-dimensional [{Cu2(bisterpy)}V2F2O2{HO3PCH2PO3}{O3PCH2PO3}](1) and [{Cu2(bisterpy)}V2F4O4{HO3P(CH2)2PO3H}](3), the two-dimensional [{Cu2(bisterpy)}V2F2O2(H2O)2{HO3P(CH2)2PO3}2] x 2H2O (2 x 2H2O), [{Cu2(bisterpy)(H2O2}V2F2O2{O3P(CH2)3PO3}{HO3P(CH2)3PO3H}(4) and [{Cu2(bisterpy)}V4F4O4(OH)(H2O){HO3P(CH2)5PO3}{O3P(CH2)5PO3}] x H2O (9 x H2O) and the three-dimensional [{Cu2(bisterpy)}3V8F6O17{HO3P(CH2)3PO3}4]0.8H2O (5 x 0.8H2O), [{Cu2(bisterpy)}V4F2O6{O3P(CH2)4PO3}2](8) and [{Cu2(bisterpy)(H2O)}2V8F4O8(OH)4{HO3P(CH2)5PO3H}2{O3P(CH2)5PO)}3] x 4.8H2O (10 x 4.8H2O). In addition, two members of the oxovanadium/Cu2(bisterpy)/organodiphosphonate family [{Cu2(bisterpy)}V2O4{HO3P(CH2)3PO3}2](6) and [{Cu2(bisterpy)}3V4O8(OH)2{O3P(CH2)3PO3}2{HO3P(CH2)3PO3}2] x 5H2O (7 x 5H2O) cocrystallized from the reaction mixture which provided 5. The overall architectures reveal embedded substructures based on V/P/O(F) clusters, chains, networks, and frameworks. In contrast to the oxovanadium/Cu2(bisterpy)/ organodiphosphonate family, several of the materials of this study also exhibit the direct condensation of vanadium polyhedra to produce binuclear and/or tetranuclear building units.     

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.     

Neutral and Cationic β‐Ketoiminato Bismuth Complexes

The first examples of neutral and cationic bismuth complexes bearing β‐ketoiminato ligands were isolated by employing salt metathesis route. BiCl₃ reacts with [O=C(Me)]CH[C(Me)N(K)Ar] ( 1 ) resulting in a homoleptic β‐ketoiminato bismuth complex Bi[{O=C(Me)}CH{C(Me)NAr}]₃ ( 2 ). The reaction between BiCl₃ and [(CH₂)₂{N(K)C(Me)CHC(Me)=O}₂] ( 3 ) leads to the formation of a cationic bismuth complex [Bi{(CH₂)₂(NC(Me)CHC(Me)=O)₂}]₄[Bi₂Cl₁₀] ( 4 ).     

Deprotonation induced ligand-to-metal electron transfer: synthesis of a mixed-valence Rh(-I,I) dinuclear compound and its reaction with dioxygen

Treatment of bis(2-picolyl)amine (bpa) with [{Rh(nbd)(mu-OMe)}2] leads to the unexpected and unique redox asymmetric dinuclear Rh-I,Rh+I complex [{Rh(nbd)}2(bpa-2H)] (2) with a pi-coordinating imine bound to a tetrahedral low valent rhodate(-I). Mono-oxygenation of the deprotonated bpa ligand in 2 by O2 leads to the mononuclear carboxamido complex [Rh(nbd)(bpam-H)] (3) (bpam = N-(2-picolyl)picolinamide). The second O atom of O2 ends up as a hydroxo fragment in [{Rh(nbd)(mu-OH)}2].     

Structural and magnetic diversity in cyano-bridged bi- and trimetallic complexes assembled from cyanometalates and [M(rac-CTH)]n+ building blocks (CTH = d,l-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane)

Seven new cyano-bridged heterometallic systems have been prepared by assembling [M'(rac-CTH)]n+ complexes (M' = CrIII, NiII, CuII), which have two cis available coordination positions, and [M(CN)6]3- (M = FeIII, CrIII) and [Fe(CN)2(bpy)2]+ cyanometalate building blocks. The assembled systems, which have been characterized by X-ray crystallography and magnetic investigations, are the molecular squares (meso-CTH-H2)[{Ni(rac-CTH)}2{Fe(CN)6)}2].5H2O (2) and [{Ni(rac-CTH)}2{Fe(CN)2(bpy)2}2](ClO4)4.H2O (5), the bimetallic chain [{Ni(rac-CTH)}2{Cr(CN)6)}2Ni(meso-CTH)].4H2O (3), the trimetallic chain [{Ni(rac-CTH)}2{Fe(CN)6)}2Cu(cyclam)]6H2O (4), the pentanuclear complexes [{Cu(rac-CTH}3{Fe(CN)6}2].2H2O (6) and [{Cu(rac-CTH)}3{Cr(CN)6)}2].2H2O (7), and the dinuclear complex [Cr(rac-CTH)(H2O)Fe(CN)6].2H2O (8). With the exception of 5, all compounds exhibit ferromagnetic interaction between the metal ions (JFeNi = 12.8(2) cm-1 for 2; J1FeCu= 13.8(2) cm-1 and J2FeCu= 3.9(4) cm-1 for 6; J1CrCu= 6.95(3) cm-1 and J2CrCu= 1.9(2)cm-1 for 7; JCrFe = 28.87(3) cm-1 for 8). Compound 5 exhibits the end of a transition from the high-spin to the low-spin state of the octahedral FeII ions. The bimetallic chain 3 behaves as a metamagnet with a critical field Hc = 300 G, which is associated with the occurrence of week antiferromagnetic interactions between the chains. Although the trimetallic chain 4 shows some degree of spin correlation along the chain, magnetic ordering does not occur. The sign and magnitude of the magnetic exchange interaction between CrIII and FeIII in compound 8 have been justified by DFT type calculations.     

Metal versus ligand alkylation in the reactivity of the (bis-iminopyridinato)Fe catalyst

The alkylation of the Brookhart-Gibson {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)} FeCl2 precatalyst with 2 equiv of LiCH2Si(CH3)3 led to the isolation of several catalytically very active products depending on the reaction conditions. The expected dialkylated species {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2}(C5H3N)Fe(CH2SiMe3)2 (2) was indeed the major component of the reaction mixture. However, other species in which alkylation occurred at the pyridine ring ortho position, {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2-2-CH2SiMe3}(C5H3N)Fe(CH2SiMe3) (1), and at the imine C atom, {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC(CH3)(CH2 SiMe3)](C5H3N)}Fe(CH2SiMe3) (3), have also been isolated and fully characterized. In addition, deprotonation of the methyl-imino functions and formation of a new divalent Fe catalyst {[2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}Fe(mu-Cl)Li(THF)3 (4) also occurred depending on the reaction conditions. In turn, the formation of 4 might trigger the reductive coupling of two units through the methyl-carbon wings. This process resulted in the one-electron reduction of the metal center, affording a dinuclear Fe(I) alkyl catalyst {[{[2,6-(i-Pr)2C6H5]N=C(CH3)}(C5H3N){[2,6-(i-Pr)26H5]N=CCH2}Fe(CH2SiMe3)]}2 (5). Different from other metal derivatives, complex 5 could not be prepared from the monodeprotonated version of the ligand. Its reaction with a mixture of FeCl2 and RLi afforded instead [{2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}FeCH2Si(CH3)3][Li(THF)4] (6) which is also catalytically active. All of these high-spin species have been shown to have high catalytic activity for olefin polymerization, producing polymers of two distinct natures, depending on the formal oxidation state of the metal center.     

Structurally characterized trinuclear nickel(II) and copper(II) Salamo-type complexes: syntheses,Hirshfeld analyses and fluorescent properties

Transition Metal Chemistry - Two trinuclear Ni(II) and Cu(II) coordination compounds [{Ni(L1)(C2H5OH)}2(μ-OAc)2Ni]·2C2H5OH (1) and [{Cu(L2)(CH3OH)}2(μ-OAc)2Cu]·2CH3OH (2)...     

Versatility of heterocyclic thioamides in the construction of a trinuclear cluster [Cu3I3(dppe)3 (SC5H4NH)] and Cu(I) linear polymers {Cu6(SC5H4NH)6I6}n x 2nCH3CN and {Cu(I)6 (SC3H6N2)6X6}n (X = Br, I)

Reaction of copper(I) iodide with pyridine-2-thione (2-SC5H4NH) and 1,2-bis(diphenylphosphino)ethane (dppe) in a CH3CN-CHCl3 mixture yielded a triangular cluster, [Cu3I3(mu2-P,P-dppe)3 (eta1-SC5H4NH)], 1. Similar reaction with 2-SC5H4NH and a series of diphosphanes, Ph2P-X-Ph2P {X = -CH2- (dppm), -(CH2)3- (dppp), -(CH2)4- (dppb), -CH=CH- (dppen)}, gave a novel iodo-bridged hexanuclear Cu(I) linear polymer,{Cu6(mu3-SC5H4NH)4 (mu2-SC5H4NH)2 (I4)(mu-I)2-}n x 2nCH3CN, 2. Reactions of copper(I) iodide/copper(I) bromide with 1,3-imidazolidine-2-thione (SC3H6N2) in a CH3CN-CHCl3 mixture yielded hexanuclear Cu(I) linear chain polymers, [{Cu6(mu3-SC3H6N2)2 (mu2-SC3H6N2)4X2 (mu-X)4}n] (X = Br, 4; I, 5). In compound 1, two iodide atoms and one dppe form the dinuclear Cu(mu2-I)2 (mu2-dppe)Cu core, and two dppe ligands bridge this core with the third Cu(I) center coordinated to 2-SC5H4NH via the S atom. The chain polymer 2 has a centrosymmetric hexanuclear central core, Cu6S6I4 (mu-I)2--, formed by dimerization of six-membered trinuclear motifs, Cu3(mu2-SC3H6N2)3I3 via (mu3-S) bonding modes of the thione ligand, and has four terminal and two bridging iodine atoms in trans-orientations. Linear chains are separated by the nonbonded acetonitrile molecules. In 4 and 5, three copper(I) bromide or copper(I) iodide moieties and three SC3H6N2 ligands combined via bridging S donor atoms to form the six-membered trinuclear Cu3(mu2-SC3H6N2)3I3 cores which polymerized via S and X atoms in a side-on fashion to form linear chain polymers, [{Cu6(mu3-SC3H6N2)2 (mu2-SC3H6N2)4X2(mu-X)4}n]. The (mu3-S) modes of bonding of neutral heterocyclic thioamides are first examples, as are trinuclear cluster and linear polymers rare examples in copper chemistry.