Fast-and ultra-fast laser pulse induced reactions between carbon dioxide and methane

The direct excitation of CO2 using fast (nanosecond) and ultrafast (femtosecond) pulsed lasers was investigated.A gas reaction cell was used to excite CO2 in a 50:50 mixture of CO2 and CH4 using nano-and femtosecond laser systems,to induce a reaction between these two compounds.FT-IR spectra showed that CO was formed using the nanosecond and femtosecond laser systems.It was also found that hydrocarbons,containing C-C bonds were formed.For both the nanosecond and femtosecond laser,it was found that more C-C higher hydrocarbons were formed after 5 h compared to 3 h of irradiation.Irradiation at pressures of 250,350 and 500 kPa with the femtosecond laser system showed the expected increase in the amount of CO formed with an increase in pressure.Results from this study showed that carbon dioxide and methane can be activated successfully using nanosecond laser pulses at 2000 nm and femtosecond laser pulses at 795 or 2000 nm and that these activated species react to form CO and C-C containing products.     

Theoretical investigation of the reaction of Mn+ with ethylene oxide

The potential energy surfaces of Mn(+) reaction with ethylene oxide in both the septet and quintet states are investigated at the B3LYP/DZVP level of theory. The reaction paths leading to the products of MnO(+), MnO, MnCH(2)(+), MnCH(3), and MnH(+) are described in detail. Two types of encounter complexes of Mn(+) with ethylene oxide are formed because of attachments of the metal at different sites of ethylene oxide, i.e., the O atom and the CC bond. Mn(+) would insert into a C-O bond or the C-C bond of ethylene oxide to form two different intermediates prior to forming various products. MnO(+)/MnO and MnH(+) are formed in the C-O activation mechanism, while both C-O and C-C activations account for the MnCH(2)(+)/MnCH(3) formation. Products MnO(+), MnCH(2)(+), and MnH(+) could be formed adiabatically on the quintet surface, while formation of MnO and MnCH(3) is endothermic on the PESs with both spins. In agreement with the experimental observations, the excited state a(5)D is calculated to be more reactive than the ground state a(7)S. This theoretical work sheds new light on the experimental observations and provides fundamental understanding of the reaction mechanism of ethylene oxide with transition metal cations.     

铑催化合成气制乙醇反应中CO断键途径的研究

利用程序升温表面反应─红外（ＴＰＳＲ－ＩＲ）动态技术考察ＣＯ吸附物种对氢的反应性能并检验表面反应生成的中间物，结果表明线式ＣＯ对氢的反应性能高于桥式ＣＯ，即线式ＣＯ更可能是活性吸附态；表面反应生成了ＨＣＯ、ＣＨ２等中间物．用键级守恒（ＢＯＣ）－Ｍｏｒｓｅ势方法计算比较了ＣＯ→ＣＨ２过程中各可能基元步骤在Ｒｈ（１１１）面上的反应活化能和反应热，结果表明ＣＯ经其部分氢化物种（如Ｈ２ＣＯ、ＨＣＯＨ）的氢解反应断裂Ｃ─Ｏ键在能量上最有利．根据这些实验结果，提出铑基催化剂上合成气转化反应主要按缔合式机理进行；ＣＯ的优势断键途径为先部分氢化，而后氢助断键．     

Activation of C-O and C-C bonds and formation of novel HAlOH-ether complexes: an EPR study of the reaction of ground-state Al atoms with methylethyl ether and diethyl ether

Reaction mixtures, containing Al atoms and methylethyl ether (MEE) or diethyl ether (DEE) in an adamantane matrix, were prepared with the aid of a metal-atom reactor known as a rotating cryostat. The EPR spectra of the resulting products were recorded from 77-260 K, at 10 K intervals. Al atoms were found to insert into methyl-O, ethyl-O, and C-C bonds to form CH(3)AlOCH(2)CH(3), CH(3)OAlCH(2)CH(3), and CH(3)OCH(2)AlCH(3), respectively, in the case of MEE while DEE produced CH(3)CH(2)AlOCH(2)CH(3) and CH(3)AlCH(2)OCH(2)CH(3), respectively. From the intensity of the transition lines attributed to the Al atom C-O insertion products of MEE, insertion into the methyl-O bond is preferred. The Al hyperfine interaction (hfi) extracted from the EPR spectra of the C-O insertion products was greater than that of the C-C insertion products, that is, 5.4% greater for the DEE system and 7% greater for the MEE system. The increase in Al hfi is thought to arise from the increased electron-withdrawing ability of the substituents bonded to Al. Besides HAlOH, resulting from the reaction of Al atoms with adventitious water, novel mixed HAlOH:MEE and HAlOH:DEE complexes were identified with the aid of isotopic studies involving H(2)(17)O and D(2)O. The Al and H hfi of HAlOH were found to decrease upon complex formation. These findings are consistent with the nuclear hfi calculated using a density functional theory (DFT) method with close agreement between theory and experiment occurring at the B3LYP level using a 6-311+G(2df,p) basis set.     

Metastable decomposition and hydrogen migration of ethane dication produced in an intense femtosecond near-infrared laser field

We investigated a formation channel of triatomic molecular hydrogen ions from ethane dication induced by irradiation of intense laser fields (800 nm, 100 fs, ～1 × 10(14) W∕cm(2)) by using time of flight mass spectrometry. Hydrogen ion and molecular hydrogen ion (H,D)(n)(+) (n = 1-3) ejected from ethane dications, produced by double ionization of three types of samples, CH(3)CH(3), CD(3)CD(3), and CH(3)CD(3), were measured. All fragments were found to comprise components with a kinetic energy of ～3.5 eV originating from a two-body Coulomb explosion of ethane dications. Based on the signal intensities and the anisotropy of the ejection direction with respect to the laser polarization direction, the branching ratios, H(+):D(+) = 66:34, H(2)(+):HD(+):D(2)(+) = 63:6:31, and H(3)(+):H(2)D(+):HD(2)(+):D(3)(+) = 26:31:34:9 for the decomposition of C(2)H(3)D(3)(2+), were determined. The ratio of hydrogen molecules, H(2):HD:D(2) = 31:48:21, was also estimated from the signal intensities of the counter ion C(2)(H,D)(4)(2+). The similarity in the extent of H∕D mixture in (H,D)(3)(+) with that of (H,D)(2) suggests that these two dissociation channels have a common precursor with the C(2)H(4)(2+)...H(2) complex structure, as proposed theoretically in the case of H(3)(+) ejection from allene dication [A. M. Mebel and A. D. Bandrauk, J. Chem. Phys. 129, 224311 (2008)]. In contrast, the (H,D)(2)(+) ejection path with a lower extent of H∕D mixture and a large anisotropy is expected to proceed essentially via a different path with a much rapid decomposition rate. For the Coulomb explosion path of C-C bond breaking, the yield ratios of two channels, CH(3)CD(3)(2+)→ CH(3)(+) + CD(3)(+) and CH(2)D(+) + CHD(2)(+), were 81:19 and 92:8 for the perpendicular and parallel directions, respectively. This indicates that the process occurs at a rapid rate, which is comparable to hydrogen migration through the C-C bond, resulting in smaller anisotropy for the latter channel that needs H∕D exchange.     

Theoretical study of the CH2 + O photodissociation of formaldehyde adsorbed on the Ag(111) surface

Configuration interaction calculations of the ground and excited states of the H2CO molecule adsorbed on the Ag(111) surface have been carried out to study the photoinduced dissociation process leading to polymerization of formaldehyde. The metal-adsorbate system has been described by the embedded cluster and multireference configuration interaction methods. The pi electron-attachment H2CO- and n-pi* internally excited H2CO* states have been considered as possible intermediates. The calculations have shown that H2CO* is only very weakly bound on Ag(111), and thus that the dissociation of adsorbed formaldehyde due to internal excitation is unlikely. By contrast, the H2CO- anion is strongly bound to Ag(111) and gains additional vibrational energy along the C-O stretch coordinate via Franck-Condon excitation from the neutral molecule. Computed energy variations of adsorbed H2CO and H2CO- at different key geometries along the pathway for C-O bond cleavage make evident, however, that complete dissociation is very difficult to attain on the potential energy surface of either of these states. Instead, reneutralization of the vibrationally excited anion by electron transfer back to the substrate is the most promising means of breaking the C-O bond, with subsequent formation of the coadsorbed O and CH2 fragments. Furthermore, it has been demonstrated that the most stable state for both dissociation fragments on Ag(111) is a closed-shell singlet, with binding energies relative to the gas-phase products of approximately 3.2 and approximately 1.3 eV for O and CH2, respectively. Further details of the reaction mechanism for the photoinduced C-O bond cleavage of H2CO on the Ag(111) surface are also given.     

Open-loop and closed-loop control of dissociative ionization of ethanol in intense laser fields

The relative yield of the C-O bond breaking with respect to the C-C bond breaking in ethanol cation C2H5OH+ is maximized in intense laser fields (10(13)-10(15) Wcm2) by open-loop and closed-loop optimization procedures. In the open-loop optimization, a train of intense laser pulses are synthesized so that the temporal separation between the first and last pulses becomes 800 fs, and the number and width of the pulses within a train are systematically varied. When the duration of 800 fs is filled with laser fields by increasing the number of pulses or by stretching all pulses in a triple pulse train, the relative yield of the C-O bond breaking becomes significantly large. In the closed-loop optimization using a self-learning algorithm, the four dispersion coefficients or the phases of 128 frequency components of an intense laser pulse are adopted as optimized parameters. From these optimization experiments it is revealed that the yield ratio of the C-O bond breaking is maximized as far as the total duration of the intense laser field reaches as long as approximately 1 ps and that the intermittent disappearance of the laser field within a pulse does not affect the relative yields of the bond breaking pathways.     

Photodissociation spectroscopy of the Mg+-acetic acid complex

We have studied the structure and photodissociation of Mg(+)-acetic acid clusters. Ab initio calculations suggest four relatively strongly bound ground state isomers for the [MgC(2)H(4)O(2)](+) complex. These isomers include the cis and trans forms of the Mg(+)-acetic acid association complex with Mg(+) bonded to the carbonyl O atom of acetic acid, the Mg(+)-acetic acid association complex with Mg(+) bonded to the hydroxyl O atom of acetic acid, or to a Mg(+)-ethenediol association complex. Photodissociation through the Mg(+)-based 3p<--3s absorption bands in the near UV leads to direct (nonreactive) and reactive dissociation products: Mg(+), MgOH(+), Mg(H(2)O)(+), CH(3)CO(+), and MgCH(3) (+). At low energies the dominant reactive quenching pathway is through dehydration to Mg(H(2)O)(+), but additional reaction channels involving C-H and C-C bond activation are also open at higher energies.     

Controlling the dissociative ionization of ethanol with 800 and 400 nm two-color femtosecond laser pulses

Ethanol molecules were irradiated with a pair of temporally overlapping ultrashort intense laser pulses (10(13)-10(14) Wcm(2)) with different colors of 400 and 800 nm, and the dissociative ionization processes have been investigated. The yield ratio of the C-O bond breaking with respect to the C-C bond breaking was varied in the range of 0.17-0.53 sensitively depending on the delay time between the two laser pulses, and the absolute value of the yield of the C-O bond breaking was found to be increased largely when the Fourier-transform limited 800 nm laser pulse overlaps the stretched 400 nm laser pulse, demonstrating an advantage of the two-color intense laser fields in controlling chemical bond breaking processes.     

Reaction of carbon monoxide and hydrogen on neutral Nb8 clusters in the gas phase

Reactions of neutral V(n), Nb(n), and Ta(n) metal clusters (n< or =11) with CO+H(2) mixed gases and CH(3)OH in a flow tube reactor (1-50 Torr) are studied by time of flight mass spectroscopy and density functional theory calculations. Metal clusters are generated by laser ablation, and reactants and products are ionized by low fluence (approximately 200 microJ/cm(2)) 193 nm excimer laser light. Nb(n) clusters exhibit strong size dependent reactivity in reactions both with CO+H(2) and CH(3)OH compared with V(n) and Ta(n) clusters. A "magic number" (relatively intense) mass peak at Nb(8)COH(4) is observed in the reaction of Nb(n) clusters with CO+H(2), and CH(3)OH is suggested to be formed. This feature at Nb(8)COH(4) remains the most intense peak independent of the relative concentrations of CO and H(2) in the flow tube reactor. No other Nb(n), Ta(n), or V(n) feature behaves in this manner. In reactions of CH(3)OH with metal clusters M(n) (M=V, Nb, and Ta, n=3-11), nondehydrogenated products M(n)COH(4)/M(n)CH(3)OH are only observed on Nb(8) and Nb(10), whereas dehydrogenated products M(n)CO/CM(n)O are observed for all other clusters. These observations support the suggestion that CH(3)OH can be formed on Nb(8) in the reaction of Nb(n) with CO+H(2). A reaction mechanism is suggested based on the experimental results and theoretical calculations of this work and of those in the literature. Methanol formation from CO+H(2) on Nb(8) is overall barrierless and thermodynamically and kinetically favorable.     

Direct observation of the oxidative addition of the aryl carbon-oxygen bond to a ruthenium complex and consideration of the relative reactivity between aryl carbon-oxygen and aryl carbon-hydrogen bonds

When RuH2(CO)(PPh3)3 was reacted with 2,2-dimethyl-1-(2-p-tolylphenyl)propan-1-one (2), the ruthenium-aryloxy complex 3 was obtained in 76% yield. The structure of this complex was determined from 1H and 31P NMR and X-ray data. Complex 3 showed the catalytic activity for the coupling of 2 with the phenylboronate 4. The 1H and 31P NMR studies of the reaction of Ru(CO)(PPh3)3 with o-aryloxy pivalophenone revealed that the C-H bond cleavage is a kinetically favorable process but the C-O bond cleavage is a thermodynamic one. The reaction of 2'-methoxyacetophenone with vinylsilane and organoboronate resulted in chemoselective C-C bond formation.     

Fast- and ultra-fast laser pulse induced reactions between carbon dioxide and methane

The direct excitation of CO_2 using fast (nanosecond) and ultrafast (femtosecond) pulsed lasers was investigated. A gas reaction cell was used to excite CO_2 in a 50:50 mixture of CO_2 and CH_4 using nano- and femtosecond laser systems, to induce a reaction between these two compounds. FT-IR spectra showed that CO was formed using the nanosecond and femtosecond laser systems. It was also found that hydrocarbons, containing C-C bonds were formed. For both the nanosecond and femtosecond laser, it was found that more C-C higher hydrocarbons were formed after 5 h compared to 3 h of irradiation. Irradiation at pressures of 250, 350 and 500 kPa with the femtosecond laser system showed the expected increase in the amount of CO formed with an increase in pressure. Results from this study showed that carbon dioxide and methane can be activated successfully using nanosecond laser pulses at 2000 run and femtosecond laser pulses at 795 or 2000 nm and that these activated species react to form CO and C-C containing products.     

C-O bond cleavage of benzophenone substituted by 4-CH2OR (R = C6H5 and CH3) with stepwise two-photon excitation

The C-O bond cleavage from benzophenone substituted with 4-CH2OR (p-BPCH2OR, 1-3), such as p-phenoxymethylbenzophenone (1, R= C6H5) and p-methoxymethylbenzophenone (2, R= CH3), occurred by a stepwise two-photon excitation during two-color, two-laser flash photolysis. On the other hand, no C-O bond cleavage occurred from p-hydroxymethylbenzophenone (3, R = H). The first 355-nm laser excitation of 1-3 generates p-BPCH2OR in the lowest triplet excited state (T1) which has an absorption at 532 nm. When p-BPCH2OR(T1) is excited with the second 532-nm laser to p-BPCH2OR in the higher triplet excited state (T(n)), the C-O bond cleavage occurred within the laser flash duration of 5 ns. The quantum yields of the C-O bond cleavage during the second 532-nm laser irradiation were found to be 0.015 +/- 0.007 and 0.007 +/- 0.003 for 1 and 2, respectively. Although these values are low, the diminishing 1(T1) or 2(T1) was found to convert, in almost 100% yield, to phenoxyl (C6H5O*) and p-benzoylbenzyl (BPCH2*) radicals or methoxyl (CH3O*) and BPCH2* radicals, respectively. The T(n) excitation energy, the energy barrier along the potential surface between the T(n) states and product radicals, and delocalization of the T(n) state molecular orbital including BP and CH2OR (R = C6H5, CH3, H) moieties are important factors for the occurrence of the C-O bond cleavage. It is found that the C-O bond cleavage and production of free radicals, such as BPCH2*, C6H5O*, and CH3O*, can be performed by a stepwise two-photon excitation. The present study is an example in which the chemical reactions can be selectively initiated from the T(n) state but not from the S1 and T1 states.     

H2-induced CO adsorption and dissociation over Co/Al2O3 catalyst

The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissocia-tion. The H2 was adsorbed first, and activated to form H* over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH*, which reacted with adsorbed CO subsequently via CO*+OH* → CO2*+H*; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO onthe surface via CO*+2H* → CH*+OH*. The formation of the surface species (CH) from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.     

Two-body Coulomb explosion and hydrogen migration in methanol induced by intense 7 and 21 fs laser pulses

Two-body Coulomb explosion with the C-O bond breaking of methanol induced by intense laser pulses with the duration of Delta t=7 and 21 fs is investigated by the coincidence momentum imaging method. When Delta t=7 fs, the angular distribution of recoil vectors of the fragment ions for the direct C-O bond breaking pathway, CH(3)OH(2+)-->CH(3) (+)+OH(+), exhibits a peak deflected from the laser polarization direction by 30 degrees -45 degrees , and the corresponding angular distribution for the migration pathway, CH(2)OH(2) (+)-->CH(2) (+)+H(2)O(+), in which one hydrogen migrates from the carbon site to the oxygen site prior to the C-O bond breaking, exhibits almost the same profile. When the laser pulse duration is stretched to Delta t=21 fs, the angular distributions for the direct and migration pathways exhibit a broad peak along the laser polarization direction probably due to the dynamical alignment and/or the change in the double ionization mechanism; that is, from the nonsequential double ionization to the sequential double ionization. However, the extent of the anisotropy in the migration pathway is smaller than that in the direct pathway, exhibiting a substantial effect of hydrogen atom migration in the dissociative ionization of methanol interacting with the linearly polarized intense laser field.     

Sulfinate as cocatalyst 2 : Palladium catalyzed dimerization of butadiene with acyloins

Toluenesulfinate serves as a cocatalyst for the selective formation of α-hydroxy α-octa-2,7-dienyl ketones (2, the products of C-C bond formation) in the reaction of palladium catalyzed dimerization of 1,3-butadiene with acyloins, while the same reaction using triphenylphosphine, instead of toluenesulfinate, as a cocatalyst provides a mixture of 2 and 2-oxy octa-2′,7′-dienyl ethers (3, the products of C-O bond formation).     

Direct detection of polyynes formation from the reaction of ethynyl radical (C2H) with propyne (CH3-C[triple bond]CH) and allene (CH2=C=CH2)

The reactions of the ethynyl radical (C(2)H) with propyne and allene are studied at room temperature using an apparatus that combines the tunability of the vacuum ultraviolet radiation of the Advanced Light Source at Lawrence Berkeley National Laboratory with time-resolved mass spectrometry. The C(2)H radical is prepared by 193-nm photolysis of CF(3)CCH and the mass spectrum of the reacting mixture is monitored in time using synchrotron-photoionization with a dual-sector mass spectrometer. Analysis using photoionization efficiency curves allows the isomer-specific detection of individual polyynes of chemical formula C(5)H(4) produced by both reactions. The product branching ratios are estimated for each isomer. The reaction of propyne with ethynyl gives 50-70% diacetylene (H-C[triple bond]C-C[triple bond]C-H) and 50-30% C(5)H(4), with a C(5)H(4)-isomer distribution of 15-20% ethynylallene (CH(2)=C=CH-C[triple bond]CH) and 85-80% methyldiacetylene (CH(3)-C[triple bond]C-C[triple bond]CH). The reaction of allene with ethynyl gives 35-45% ethynylallene, 20-25% methyldiacetylene and 45-30% 1,4-pentadiyne (HC[triple bond]C-CH(2)-C[triple bond]CH). Diacetylene is most likely not produced by this reaction; an upper limit of 30% on the branching fraction to diacetylene can be derived from the present experiment. The mechanisms of polyynes formation by these reactions as well as the implications for Titan's atmospheric chemistry are discussed.     

Intracluster ion-molecule reactions of Ti+ with C2H5OH and CF3CH2OH clusters: influence of fluorine substituents on chemical reactivity

A laser ablation-molecular beam/reflectron time-of-flight mass spectrometric technique was used to investigate the ion-molecule reactions that proceed within Ti+(ROH)n (R = C2H5, CF3CH2) heterocluster ions. The mass spectra exhibit a major sequence of cluster ions with the formula Ti+(OR)m(ROH)n (m = 1, 2), which is attributed to sequential insertions of Ti+ into the O-H bond of C2H5OH or CF3CH2OH molecules within the heteroclusters, followed by H eliminations. The TiO+ and TiOH+ ions produced from the reactions of Ti+ with C2H5OH are interpreted as arising from insertion of Ti+ into the C-O bond, followed by C2H5 and C2H6 eliminations, respectively. When Ti+ reacted with CF3CH2OH, by contrast, considerable contributions from TiFOH+, TiF2+, and TiF2OH+ ions were observed in the mass spectrum of the reaction products, indicating that F and OH abstractions are the dominant product channels. Ab initio calculations of the complex of Ti+ with 2,2,2-trifluoroethanol show that the minimum energy structure is that in which Ti+ is attached to the O atom and one of the three F atoms of 2,2,2-trifluoroethanol, forming a five-membered ring. Isotope-labeling experiments additionally show that the chemical reactivity of heterocluster ions is greatly influenced by the presence of fluorine substituents and cluster size. The reaction energetics and formation mechanisms of the observed heterocluster ions are discussed.     

Laser ablation of NaN3 and CsN3

Solid sodium azide and cesium azide crystals were irradiated by high power laser pulses; the ablation products were rapidly cooled by a supersonic expansion of helium and detected by a time of flight mass spectrometer. Neutral and positively charged species were separately recorded and analyzed using 15N isotopomers to help in their assignment. Cluster series of the sequences Na(NaN3)n [or Cs(CsN3)n] were observed, as well as clusters containing NaOH and NaCN; the origin of the C, H, and O atoms appears to be water and CO2 occluded in the salt. Addition of D2O increased the intensity of large clusters and added deuterated ones, whereas addition of chloroform leads to formation of clusters of a Na atom with (NaCl)n clusters. Possible mechanisms for the formation of these clusters are discussed.     

Partial oxidation of propylene catalyzed by VO3 clusters: a density functional theory study

Density functional theory (DFT) calculations are carried out to investigate partial oxidation of propylene over neutral VO 3 clusters. C=C bond cleavage products CH 3CHO + VO 2CH 2 and HCHO + VO 2CHCH 3 can be formed overall barrierlessly from the reaction of propylene with VO 3 at room temperature. Formation of hydrogen transfer products H 2O + VO 2C 3H 4, CH 2=CHCHO + VO 2H 2, CH 3CH 2CHO + VO 2, and (CH 3) 2CO + VO 2 is subject to tiny (0.01 eV) or small (0.06 eV, 0.19 eV) overall free energy barriers, although their formation is thermodynamically more favorable than the formation of C=C bond cleavage products. These DFT results are in agreement with recent experimental observations. VO 3 regeneration processes at room temperature are also investigated through reaction of O 2 with the CC bond cleavage products VO 2CH 2 and VO 2CHCH 3. The following barrierless reaction channels are identified: VO 2CH 2 + O 2 --> VO 3 + CH 2O; VO 2CH 2 + O 2 --> VO 3C + H 2O, VO 3C + O 2 --> VO 3 + CO 2; VO 2CHCH 3 + O 2 --> VO 3 + CH 3CHO; and VO 2CHCH 3 + O 2 --> VO 3C + CH 3OH, VO 3C + O 2 --> VO 3 + CO 2. The kinetically most favorable reaction products are CH 3CHO, H 2O, and CO 2 in the gas phase model catalytic cycles. The results parallel similar behavior in the selective oxidation of propylene over condensed phase V 2O 5/SiO 2 catalysts.