Solvation structure and dynamics for passivated Au nanoparticle in supercritical CO2: a molecular dynamic simulation

All-atomic molecular dynamics simulations have been performed to study the interfacial structural and dynamical properties of passivated gold nanoparticles in supercritical carbon dioxide (scCO(2)). Simulations were conducted for a 55-atom gold nanocore with thiolated perfluoropolyether as the packing ligands. The effect of solvent density and surface coverage on the structural and dynamical properties of the self-assembly monolayer (SAM) has been discussed. The simulation results demonstrate that the interface between nanoparticle and scCO(2) solvent shows a depletion region due to the preclusion of SAM. The presence of scCO(2) solvent around the passivated Au nanoparticle can lead to an enhanced extension of the surface SAM. Under full coverage, the structure and conformation of SAM are insensitive to the density change of scCO(2) fluid. This simulation results clarify the microscopic solvation mechanism of passivated nanoparticles in supercritical fluid medium and is expected to be helpful in understanding the scCO(2)-based nanoparticle dispersion behavior.     

Interaction of cationic liposomes with cell membrane models

The colloidal dispersion stability of nano-sized graphene sheets in supercritical fluid (SCF) media is very important for developing SCF-based exfoliation and dispersion technologies for stabilization and solubilization of graphenes. We carried out molecular dynamics simulations to elucidate the stability mechanism of graphene in supercritical CO(2) (scCO(2)). The potential of mean force (PMF) between two graphene nanosheets in scCO(2) was simulated, and the effect of scCO(2) density and temperature on the PMF behavior has been investigated. The simulation results demonstrate that there exists a free energy barrier between graphenes in the scCO(2) fluid, possibly obstructing the aggregation of graphenes. The single-layer confined CO(2) molecules between the graphene sheets can induce a dominating repulsion interaction between graphene sheets. At higher scCO(2) fluid density, there are more confined CO(2) molecules within the interplate regions, resulting in a stronger repulsive free energy barrier. The effect of temperature on the PMF is relatively minor. The scCO(2) solvent structure shows layered confined arrangement in the interfacial region near the graphene nanosheets, which is correlated well with the PMF profile curve.     

Control of stripelike and hexagonal self-assembly of gold nanoparticles by the tuning of interactions between triphenylene ligands

We describe the self-assembly of gold nanoparticles (Au NPs) protected with newly synthesized discotic liquid crystalline molecules of hexaalkoxy-substituted triphenylene (TP) in mixed toluene/methanol solvent. The stripelike (i.e., 2D consisting of linear 1D in stripe) self-assembly is realized successfully by the aid of pi-pi stacking of TP ligand on Au NPs. The smaller Au NPs with TP (AuTP) or the longer alkyl chain between TP and the gold core provide more free spaces among TP moieties. These spaces allow easy insertion of TP on adjacent AuTPs to lead an interparticle pi-pi interaction to form the stripelike arrangement. The solvent hydrophilicity can also serve as a controlled index to tune arrangement among stripelike, hexagonal close packed (hcp), or disorder. We have changed the solvent hydrophilicity by changing the ratio of methanol to toluene, which affects the balance of solution of AuTP (in toluene) and deposition (in methanol). The larger space between TPs and appropriate solvent hydrophilicity realize stripelike self-assembly caused by a strong pi-pi interaction between TPs, which was characterized by TEM, as well as fluorescence, dynamic light scattering, and 1H NMR spectra.     

Interactions between sterically stabilized nanoparticles in supercritical fluids: a simulation study

The authors report a simulation study of the interaction between gold nanoparticles stabilized with both linear and branched alkane chains in supercritical ethane. In agreement with experimental and previous theoretical work, the authors find that increasing solvent density and making ligands more branched make the nanoparticle interaction more repulsive. These findings are analyzed in terms of the extent of the chain interdigitation and chain-solvent interaction energy.     

Alkanetelluroxide-protected gold nanoparticles

The synthesis and characterization of the first air-stable tellurium-containing ligand-protected gold nanoparticles (NPs) are reported. Although the synthesis largely followed the well-known Brust two-phase approach, the starting ligand was dioctyl ditelluride rather than alkanetellurol, which is an analogue of the widely used alkanethiol. Dioctyl ditelluride was used because alkanetellurol is unstable. The 1H and 13C NMR spectra, as well as infrared spectra (IR) of the formed Au NPs, indicated that the Te-Te bond in the starting ligand was broken but the octyl group was intact. This was further corroborated by the solid-state 125Te NMR spectrum that displayed a very broad and significantly downfield-shifted peak, indicating that tellurium was directly bound to the Au core. Furthermore, the O 1s and Te 3d XPS spectra of the Au NPs indicated that the capping ligands were octanetelluroxide. An average particle size of 2.7 nm diameter as measured by transmission electron microscopy (TEM) corresponded to an Au607 core. A two-step weight loss of approximately 22.2% in total was observed in the thermogravimetric analysis, which indicated about 53% ligand monolayer coverage (i.e., Au607(Te(=O)C8H17)133). Additionally, dioctyl ditelluride demonstrated an intriguing reductive power that led to a more sophisticated chemistry of forming the air-stable octanetelluroxide-protected gold NPs. It has been found that (1) when the ratio of Au to Te was about 1.5 a colorless intermediate state similar to Au(I)-SR (the intermediate state widely accepted in the synthesis of thiolate-protected Au NPs) could be obtained and (2) this kind of intermediate state played a key role in the formation of stable Au NPs.     

Gold nanoparticles stabilized by thioether dendrimers

Ligand-stabilized gold nanoparticles (Au NPs) are promising materials for nanotechnology with applications in electronics, catalysis, and sensors. These applications depend on the ability to synthesize stable and monodisperse NPs. Herein, the design and synthesis of two series of dendritic thioether ligands and their ability to stabilize Au NPs is presented. The dendrimers have 1,3,5-trisubstituted benzene branching units bridged by either meta-xylene or ethylene moieties. A comparison between the two ligands shows how both size control and the stability of the NPs are influenced by the nature of the ligand-NP wrapping interaction. The meta-xylene-bridged ligands provided NPs with a narrow size distribution centered around a diameter of 1.2 nm, whereas the NPs formed with ethylene-bridged dendrimers lack long-term stability with NP aggregation detected by UV/Vis spectroscopy and transmission electron microscopy. The bulkier tert-butyl-functionalized meta-xylene bridges form larger ligand shells that inhibit further growth of the NPs and thus provide a simple route to stable and monodisperse Au NPs that may find use as functional components in nanoelectronic devices.     

Sensing colorimetric approaches based on gold and silver nanoparticles aggregation: Chemical creativity behind the assay. A review

Localized surface plasmon resonance (LSPR) is one of the most remarkable features of gold nanoparticles (Au NPs) and silver nanoparticles (Ag NPs). Due to these inherent optical properties, colloidal solutions of Au and Ag NPs have high extinction coefficients and different colour in the visible region of the spectrum when they are well-spaced in comparison with when they are aggregated. Therefore, a well-designed chemical interaction between the analyte and NPs surroundings leads to a change of colour (red to blue for Au NPs and yellow to brown for Ag NPs from well-spaced to aggregated ones, respectively) allowing the visual detection of the target analyte.     

Gold nanoparticles with different capping systems: an electronic and structural XAS analysis

Gold nanoparticles (NPs) have been prepared with three different capping systems: a tetralkylammonium salt, an alkanethiol, and a thiol-derivatized neoglycoconjugate. Also gold NPs supported on a porous TiO(2) substrate have been investigated. X-ray absorption spectroscopy (XAS) has been used to determine the electronic behavior of the different capped/supported systems regarding the electron/hole density of d states. Surface and size effects, as well as the role of the microstructure, have been also studied through an exhaustive analysis of the EXAFS (extended X-ray absorption fine structure) data. Very small gold NPs functionalized with thiol-derivatized molecules show an increase in d-hole density at the gold site due to Au-S charge transfer. This effect is overcoming size effects (which lead to a slightly increase of the d-electron density) for high S:Au atomic ratios and core-shell microstructures where an atomically abrupt Au-S interface likely does not exist. It has been also shown that thiol functionalization of very small gold NPs is introducing a strong distortion as compared to fcc order. To the contrary, electron transfer from reduced support oxides to gold NPs can produce a higher increase in d-electron density at the gold site, as compared to naked gold clusters.     

Responsive polymer/gold nanoparticle composite thin films fabricated by solvent-induced self-assembly and spin-coating

Self-assembled poly(4-vinylpyridine)-grafted gold (Au) nanoparticles (NPs) and polystyrene-b-poly(4-vinylpyridine) block copolymers were fabricated by the introduction of a selective solvent to a common solution. The assembled mixtures were spin-coated onto solid substrates to fabricate composite gold/polymer thin films composed of copolymer-hybridized Au NPs and independent copolymer micelles. The obtained composite Au thin films had variable localized surface plasmon resonance (LSPR) bands and microscopic morphologies upon vapor annealing with selective solvents because the adsorption and dissolving of solvent molecules into the films could rearrange the copolymer block. The hybrid nanostructured Au thin films may have potential in vapor sensing and organic assays.     

Functionalized gold nanoparticles as phosphorescent nanomaterials and sensors

Ligand-capped gold nanoparticles were synthesized by capping monothiol derivatives of 2,2'-dipyridyl onto the surface of Au nanoparticles (Au-BT). The average size of the metal core is around 4 nm, with a shell of approximately 340 bipyridine ligands around the Au nanoparticle. The high local concentration of the chelating ligands ( approximately 5 M) around the Au nanoparticle makes these particles excellent ion sponges, and their complexation with Eu(III)/Tb(III) ions yields phosphorescent nanomaterials. Absorption spectral studies confirm a 1:3 complexation between Eu(III)/Tb(III) ions and bipyridines, functionalized on the surface of Au nanoparticles. The red-emitting Au-BT:Eu(III) complex exhibits a long lifetime of 0.36 ms with six line-like emission peaks, whereas the green-emitting Au-BT:Tb(III) complex exhibits a lifetime of 0.7 ms with four line-like emission peaks. These phosphorescent nanomaterials, designed by linking BT:Eu(III) complexes to Au nanoparticles, were further utilized as sensors for metal cations. A dramatic decrease in the luminescence was observed upon addition of alkaline earth metal ions (Ca(2+), Mg(2+)) and transition metal ions (Cu(2+), Zn(2+), Ni(2+)), resulting from an isomorphous substitution of Eu(III) ions, whereas the luminescence intensity was not influenced by the addition of Na(+) and K(+) ions. Direct interaction of bipyridine-capped Au nanoparticles with Cu(2+) ions brings the nanohybrid systems closer, leading to the formation of three-dimensional superstructures. Strong interparticle plasmon interactions were observed in these closely spaced Au nanoparticles.     

Alkynylisocyanide gold mesogens as precursors of gold nanoparticles

Gold nanoparticles (Au NPs) have been synthesized using simple thermolysis, whether from the mesophase or from toluene solutions, of mesogenic alkynyl-isocyanide gold complexes [Au(C≡C-C(6)H(4)-C(m)H(2m+1))(C≡N-C(6)H(4)-O-C(n)H(2n+1))]. The thermal decomposition from the mesophase is much slower than from solution and produces a more heterogeneous size distribution of the nanoparticles. Working in toluene solution, the size of nanoparticles can be modulated from ~2 to ~20 nm by tuning the chain lengths of the ligands present in the precursor. Different experimental conditions have been analyzed to reveal the processes governing the formation of the gold nanoparticles. Experiments on the effect of adding ligands or bubbling oxygen support that the thermal decomposition is a bimolecular process that starts by decoordination of the isocyanide ligand, producing an oxidative coupling of the akynyl group to [R-C≡C-C≡C-R] and reduction of gold(I) to gold(0) as nanoparticles. The nanoparticles obtained behave as a catalyst in the oxidation of isocyanide (CNR) to isocyanate (OCNR), which in turn cooperates to catalyze the decomposition.     

金属载体强相互作用增强Au/TiO2催化剂在3-硝基苯乙烯选择性加氢反应的活性

自Haruta与Hutchings于上世纪八十年代末发现金纳米催化剂优异的反应活性以来,科研人员对金催化的应用领域进行了广泛而深入地研究.对金催化科学和应用领域的研究一直在进行.大量的研究表明,金催化剂在各种选择性氧化反应中具有优异的催化性能(高活性和高选择性).然而,在催化加氢反应中,尽管金催化剂相比于铂族金属显示出优越的选择性,但是由于金催化剂选择性加氢反应的活性较差,使其在选择性催化加氢反应中的应用受到了极大的限制.研究表明,金催化剂较弱的活化氢气能力是其催化加氢反应活性低的主要原因.研究发现,氢气活化的活性中心可能是界面、负价金、低配位的金原子等.金催化剂具有明显的载体效应,金属-载体之间的相互作用能够显著地改变金催化剂的催化性能.Tauster等研究发现,铂族金属与还原性载体之间存在强相互作用,能够引发载体包覆金属表面,并且使得电子从载体向金属迁移,导致金属带负电.受金属-载体强相互作用(SMSI)效应的启发,本文探究了Au/TiO2催化剂中SMSI对金催化剂加氢性能的影响.在H2或O2气氛下高温焙烧Au/TiO2,获得一系列金催化剂(Au/TiO2-TA,T为焙烧温度(oC):300、400、500和600;A为气氛:H2或O2).对比在3-硝基苯乙烯(3-NS)选择性加氢反应中的活性发现,Au/TiO2-500H的TOF值是Au/TiO2-500O的3.3倍;动力学测试表明,Au/TiO2-500H和Au/TiO2-500O的反应表观活化能分别为79.5和105.1 kJ/mol.这表明两类催化剂催化活性中心的结构存在差异.X射线光电子能谱测试结果表明,Au/TiO2-H样品中Au带部分负电,而Au/TiO2-O中Au显示为金属态.HAADF-STEM和EELS显示,Au/TiO2-H中Au NPs的表面有TiOx物种,增加了Au-TiO2的界面.EPR结果表明,Au/TiO2-H中存在表面Ti3+物种,而Au/TiO2-O样品中则没有.为确认加氢反应的活性中心到底是界面还是负价金物种,本文探究了不同温度下氢气处理的Au/TiO2的结构与性能的关系,发现Au/TiO2-300H/400H/500H催化剂都显示出较好的催化3-NS加氢活性,而Au/TiO2-600H虽然具有更多的负价金物种,但是3-NS选择性加氢反应的活性反而降低,因此,负价金不是活性中心.这是因为不同温度处理的Au/TiO2-H样品中,SMSI的强弱不同,在300、400、500 oC下,SMSI能够增加Au-TiO2的界面长度,从而增强了3-NS加氢反应的活性;而温度达到600 oC,SMSI效应太强,Au NPs被包覆更密实,导致Au/TiO2-600H的3-NS选择性加氢反应的活性下降.密度泛函理论计算表明,Au/TiO2-H样品具有更低的H2解离活化能以及氢转移活化能.氢氘交换反应也进一步验证了SMSI有利于H2的活化.     

Face preferred deposition of gold nanoparticles on alpha-cyclodextrin/octanethiol inclusion compound

The preferred deposition of gold nanoparticles (Au NPs) onto microcrystal faces of alpha-cyclodextin/octanethiol inclusion compound was obtained. The immobilization of Au NPs is caused by the spatial replacing of the citrate shell of the NPs by the free dangling SH groups of the guest molecule.     

Synthesis of gold nanoparticles from an organometallic compound in supercritical carbon dioxide

This article presents the synthesis of gold nanoparticles in a single-phase supercritical fluid carbon dioxide solvent. The gold nanoparticles were formed by the reduction of triphenylphosphine gold(I) perfluorooctanoate with dimethylamineborane. Transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis spectroscopy reveal the formation of gold nanoparticles of 1 nm in diameter. A high dispersion stability of the gold nanoparticles in supercritical carbon dioxide can be obtained by binding both triphenylphosphine and fluorocarbon ligands on the surface of the gold nanoparticles.     

Biosynthesis of gold nanoparticles using Pseudomonas aeruginosa

Pseudomonas aeruginosa were used for extra-cellular biosynthesis of gold nanoparticles (Au NPs). Consequently, Au NPs were formed due to reduction of gold ion by bacterial cell supernatant of P. aeruginosa ATCC 90271, P. aeruginosa (2) and P. aeruginosa (1). The UV-vis and fluorescence spectra of the bacterial as well as chemical prepared Au NPs were recorded. Transmission electron microscopy (TEM) micrograph showed the formation of well-dispersed gold nanoparticles in the range of 15-30 nm. The process of reduction being extra-cellular and may lead to the development of an easy bioprocess for synthesis of Au NPs.     

Electrochemical solid-state phase transformations of silver nanoparticles

Adenosine triphosphate (ATP)-capped silver nanoparticles (ATP-Ag NPs) were synthesized by reduction of AgNO(3) with borohydride in water with ATP as a capping ligand. The NPs obtained were characterized using transmission electron microscopy (TEM), UV-vis absorption spectroscopy, X-ray diffraction, and energy-dispersive X-ray analysis. A typical preparation produced ATP-Ag NPs with diameters of 4.5 ± 1.1 nm containing ~2800 Ag atoms and capped with 250 ATP capping ligands. The negatively charged ATP caps allow NP incorporation into layer-by-layer (LbL) films with poly(diallyldimethylammonium) chloride at thiol-modified Au electrode surfaces. Cyclic voltammetry in a single-layer LbL film of NPs showed a chemically reversible oxidation of Ag NPs to silver halide NPs in aqueous halide solutions and to Ag(2)O NPs in aqueous hydroxide solutions. TEM confirmed that this takes place via a redox-driven solid-state phase transformation. The charge for these nontopotactic phase transformations corresponded to a one-electron redox process per Ag atom in the NP, indicating complete oxidation and reduction of all Ag atoms in each NP during the electrochemical phase transformation.     

Degradation of Methyl Parathion,a common pesticide and fluorescence quenching of Rhodamine B,a carcinogen using β-d glucan stabilized gold nanoparticles

Natural carbohydrate polymer β-d-glucan extracted from Tricholoma crassum (Berk.) Sacc. predominantly linked by β-glycosidic bonds have been used to synthesize gold nanoparticles (Au NPs). As glucan is water soluble, the Au NPs are prepared in water medium, a green solvent. The morphology and characterization of the synthesized Au NPs have been confirmed by various techniques, like TEM, EDX, XRD, UV–Vis and FT-IR spectroscopic studies. The obtained Au NPs exhibits chemosensing property against Methyl Parathion, a group of highly toxic organophosphorous pesticide, extensively used as an agricultural chemical. Degradation of parathion using Au NPs lead to water-soluble products thereby reducing the toxicity of Methyl Parathion by disrupting the thiophosphate-ester linkage. The synthesized Au NPs also act as a good fluorescence quencher of Rhodamine B, a common fluorophore and carcinogenic compound, obeying Stern-Volmer equations. The β-d-glucan capped Au NPs are safe having possible medicinal usage.     

Electroactive gold nanoparticles protected by 4-ferrocene thiophenol monolayer

Numerous reports have focused on ferrocene-terminated electroactive self-assembled monolayers (SAMs) on a flat Au surface but only a few on ferrocene SAMs on Au colloid. In this paper, we employ 4-ferrocene thiophenol as a novel capping agent to produce electroactive gold nanoparticles in consideration of the peculiar pi-conjugated structure. Transmission electron microscopy shows the narrow-dispersed gold core with an average core diameter of ca. 2.5 nm. UV/vis spectra examine the pi-conjugated structure of 4-ferrocene thiophenol and surface plasmon absorbance of the indicated gold nanoparticles. X-ray photoelectron spectroscopy reveals electronic properties of the Au core and thiol ligands. Electrochemical measurement shows that the oxidation peak current is proportional to the scan rate, indicating the electrode process is controlled by adsorbed layer reaction. The formal potential of the Fc-MPCs is compared with that of free ferrocene in MeCN solution and the Fc-SAMs. The shifts are attributed to the phenyl moiety in the 4-ferrocene thiophenol and dielectric constant of the solvation environment.     

Amphiphilic gold nanoparticles with V-shaped arms

Here we describe a very efficient method to produce well-defined amphiphilic gold nanoparticles (Au NPs) with an equal number of hydrophobic and hydrophilic arms which are distributed along the surface of a 2-nm gold core in an alternating fashion. The strategy involves direct coupling of V-shaped block copolymer amphiphile 2 with a carboxylic group at its junction point to mercaptophenol-terminated Au NPs. The reaction proceeds under mild esterification conditions and yields the product with a molecular weight of 40 kDa, high grafting density (2.9 chains/nm2), and extremely low polydispersity (1.07). The big advantage of this approach is the opportunity to avoid the use of expensive and often inaccessible polymeric thiols. The method described here is applicable to any carboxyl-terminated molecules and can be used for the preparation of complex, yet well-defined, macromolecular hybrid structures such as 1 (Au(PB-PEG)n). The new product, which was characterized by a combination of SEC, NMR, UV-vis, DLS, and TEM, represents a unique example of gold nanoparticles soluble in any conventional solvent.     

Aggregation-resistant water-soluble gold nanoparticles

Stable, water-soluble gold nanoparticles, Au NPs, having an average diameter of ca. 4 nm, were prepared using place exchange reactions. The nanoparticles, capped with novel zwitterionic disulfide ligands, showed remarkable stability in saline media with salt concentrations as high as 3.0 M. Similarly, the Au NPs did not precipitate out of solution when charged polyelectrolytes or biopolymers were added, indicating the absence of nonspecific interactions. The stability and degree of association of Au NPs were characterized using UV-vis absorption spectroscopy, quasi-elastic light scattering, and surface-enhanced Raman scattering.