Surface structures of fluoropolymer,polyolefin and polyester films after modification by graft polymerization

Pristine and argon plasma pretreated polytetrafluoroethylene (PTFE), polystyrene (PS), high-density polyethylene (HDPE) and poly(ethylene terrephthalate) (PET) films have been subjected to near-UV light-induced graft polymerization with water-soluble acrylamide (AAm), the sodium salt of styrene sulfonic acid (NaSS), acrylic acid (AAc) and N,N-dimethylaminoethylmethylacrylate (DMAEMA) monomers. The structure and composition at the substrate surface with grafted polymer were studied by angle-resolved X-ray photoelectron spectroscopy (XPS). In most cases, the density of surface grafting is enhanced by plasma pretreatment. For each polymer substrate with a substantial amount of grafting, the hydrophilic graft penetrates or becomes partially submerged beneath a thin surface layer of dense substrate chains. This stratified microstructure is consistent with the static secondary ion mass spectroscopy (SIMS) and Ar⁺ beam depth profiling results. The two latter techniques also suggest that when the grafted polymer has a bulky substituent, there is less efficient penetration of the grafted polymer below the surface.     

Non-cytotoxic and bioactive nanocomposite film of natural Arabic gum incorporating TiO2 nanoparticles for bone tissue regeneration

Biomaterials with exceptional biocompatibility and bioactivity are now pushing the boundaries of bone tissue engineering. In this study, natural Arabic gum biopolymer incorporating titanium dioxide nanoparticles (NAG + TiO₂NP) nanocomposite film was fabricated. The FTIR and XRD analysis show the presence of functional groups assigned to NAG biopolymers and highly crystalline anatase TiO₂NP. Well dispersed TiO₂NP can be seen from SEM micrograph suggesting good interaction between TiO₂NP filler and NAG biopolymer matrix to enhance the mechanical characteristics of nanocomposite film. The NAG + TiO₂NP nanocomposite film exhibited strong bioactivity to form bone-like apatite and promoted the proliferation of MG-63 cells attributed to their excellent biocompatibility and non-toxicity. The NAG + TiO₂NP nanocomposite film also displays high antibacterial activity with (36.33 ± 1.53) mm and (27.00 ± 2.00) mm inhibition zone were recorded against Staphylococcus aureus and Escherichia coli. The findings indicate that the NAG + TiO₂NP nanocomposite film, with its improved mechanical properties, high swelling capacity, biodegradability, and non-toxicity, shows promise as a viable option for bone tissue regeneration materials.     

Electrosynthesis and thermal characterization of basic copper carbonate nanoparticles

The present study concerns the electrochemical synthesis of basic copper carbonate nanoparticles by oxidation of metallic copper on the anode in an aqueous bicarbonate solution. This simple and one-step preparation can be considered as green synthesis. The scanning electron microscopy (SEM) analysis indicates that average particle size of the product is in the range of about 70 nm. On the other hand, basic copper carbonate micro-powder has been prepared, by mixing solutions of copper(II) sulphate and sodiu bicarbonate. The SEM analysis showed that the size of particles prepared in the same way is in the range of about 1 μm. In another part of this study, the thermal decomposition of micro and nanoparticles of copper carbonate produced by various methods was studied in air using TG-DTA techniques. The results of thermal study show that the decomposition of both samples occurs in single step. Also, the TG-DTA analysis of the nanoparticles indicates that the main thermal degradation occurs in the temperature range of 245–315°C. However, microparticles of Cu(OH)₂ · CuCO₃ decomposed endothermally in the temperature range of 230–330°C.      

Analytical characterization of chitosan nanoparticles for peptide drug delivery applications

Chitosan-cyclodextrin hybrid nanoparticles (NPs) were obtained by the ionic gelation process in the presence of glutathione (GSH), chosen as a model drug. NPs were characterized by means of transmission electron microscopy and zeta-potential measurements. Furthermore, a detailed X-ray photoelectron spectroscopy study was carried out in both conventional and depth-profile modes. The combination of controlled ion-erosion experiments and a scrupulous curve-fitting approach allowed for the first time the quantitative study of the GSH in-depth distribution in the NPs. NPs were proven to efficiently encapsulate GSH in their inner cores, thus showing promising perspectives as drug carriers.     

Weatherability and wear resistance characteristics of plasma fluoropolymer coatings deposited on an elastomer substrate

The weathering characteristics of thin film formed from plasma polymerisation of perfluoro(methylcyclohexane) on an EPDM substrate under cold plasma process operated at 13.56 MHz was investigated using an ATLAS Ci 3000 Xenon weatherometer. The effects of weathering conditions on the chemical composition of the substrate and the coating were examined using photoacoustic Fourier transform infrared spectroscopy (PA-FTIR) and X-ray photoelectron spectroscopy (XPS). The wear behaviour was examined using scanning electron microscopy (SEM). The change in the surface morphological behaviour of the coating indicates that the mending line of the patch-wise coating deposition or the fissure/crack line of the coating is particularly sensitive to the initiation of decomposition. FTIR and XPS spectroscopic investigations confirm that under humid and UV conditions, elimination of fluorine and introduction of new oxygen-containing functional groups play predominant role in the decomposition of the coating. Plausible mechanisms of degradation for the elastomer and the coating have been proposed. The coated substrate shows superior abrasion resistance characteristics with respect to the neat elastomer. The adhesion between the substrate and the plasma polymer coating appears to be excellent and remains strong after weathering.     

Synthesis,analytical characterization and bioactivity of Ag and Cu nanoparticles embedded in poly-vinyl-methyl-ketone films

The electrosynthesis of copper and silver core-shell nanoparticles (NPs) by the sacrificial anode technique, employing tetraoctylammonium (TOA) salts as base electrolyte for the first time, is described. These surfactants were selected because they combine high NP stabilizing power with useful disinfecting properties. The resulting colloids were mixed with a solution of an inert dispersing polymer and used to prepare nanostructured composite thin films. The morphologies and chemical compositions of the nanomaterials were characterized by Transmission Electron Microscopy (TEM) and X-ray Photoelectron Spectroscopy (XPS). The TEM reveals that the average core diameter of the metal NPs ranges between 1.7 and 6.3 nm, as a function of the nature of the metal and of the electrosynthesis conditions, and does not change significantly upon inclusion in the polymer matrix. An appreciable concentration of the metal is detected on the nanoparticle surface by XPS. High-resolution XP spectra indicate that both copper and silver are present at zero oxidation state in all of the materials (colloids and composite films). This demonstrates the high efficiency of the surfactant at controlling the morphology and the chemical composition of the nanodispersed metal in both the as-synthesized colloid and in the polymeric dispersion. The nanocoatings are shown to exert a marked inhibitory effect on the growth of eukaryote and prokaryote target microrganisms, and experimental evidence of a synergic disinfecting effect due to the surfactant and the nanodispersed metal is provided. On the basis of these stability and bioactivity results, it is clear that Cu-NPs and Ag-NPs are suitable for application in disinfecting or antifouling paint and coating formulations.Electronic Supplementary Material Supplementary material is available for this article at Dedicated to the memory of Wilhelm Fresenius     

Analytical characterization of laser-generated copper nanoparticles for antibacterial composite food packaging

A new type of nanomaterial has been developed as antibacterial additive for food packaging applications. This nanocomposite is composed of copper nanoparticles embedded in polylactic acid, combining the antibacterial properties of copper nanoparticles with the biodegradability of the polymer matrix. Metal nanoparticles have been synthesised by means of laser ablation, a rising and easy route to prepare nanostructures without any capping agent in a liquid environment. As prepared, nanoparticle suspensions have been easily mixed to a polymer solution. The resulting hybrid solutions have been deposited by drop casting, thus obtaining self-standing antibacterial packages. All samples have been characterized by UV–Vis spectroscopy, X-ray photoelectron spectroscopy and electro-thermal atomic absorption spectroscopy. Ion release data have been matched with bioactivity tests performed by Japanese Industrial Standard (JIS) method (JIS Z 2801:2000) against Pseudomonas spp., a very common Gram-negative microbial group able to proliferate in processed food.     

Preparation and characterization of copper(II) tetrasulfonated phthalocyanine nanoparticles formed by laser ablation in poor solvents

Laser irradiation of copper(II) tetrasulfonated phthalocyanine (CuTsPc) microcrystals in poor organic solvents such as methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone has produced CuTsPc nanoparticles with 15–112 nm in diameter. Field emission scanning electron microscopy (FESEM) images have shown the formation of CuTsPc nanoparticles in poor organic solvents used in this work. The mean diameters of CuTsPc nanoparticles obtained from transmission electron microscopy (TEM) images in methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone were determined to be 26, 36, 35, 86, and 78 nm, respectively. A correlation between the size of CuTsPc nanoparticles and a solvent polarity could be found in this work.     

Synthesis of metallic copper nanoparticles coated with polypyrrole

This paper describes a method for polypyrrole (PPy) coating of metallic Cu nanoparticles in aqueous solution in atmosphere. Colloid solution of Cu nanoparticles was prepared by reducing Cu ions with the use of hydrazine in an aqueous solution dissolving citric acid and cetyltrimethylammonium bromide as stabilizers. The PPy coating was performed by polymerizing pyrrole with the use of hydrogen peroxide as an initiator in an aqueous colloid solution of the Cu nanoparticles. Ultraviolet–visible extinction measurements, transmission electron microscopy observation, and X-ray diffraction measurements revealed that the metallic Cu nanoparticles with a size of 27.6 ± 11.1 nm were coated with PPy. The obtained PPy-coated Cu particles were chemically stable even in atmosphere.     

Porous multifunctional fluoropolymer composite foams prepared via humic acid modified Fe3O4 nanoparticles stabilized Pickering high internal phase emulsion using cationic fluorosurfactant as co-stabilizer

Fluoropolymers are very important owing to their excellent application performances, especially in extreme conditions. On the other hand, the preparation of porous fluoropolymers is a difficult task due to unavailability of suitable surfactants as well as tedious synthesis steps. Here we prepared multifunctional porous fluoropolymer composite foams with a simple process of “high internal phase emulsion (HIPE)” by using humic acid modified iron oxide nanoparticles (HA-Fe₃O₄ NPs) and cationic fluorosurfactant (CFS) (PDMAEMA-b-PHFBA) as co-stabilizer. The inclusion of HA-Fe₃O₄ NPs in the system made fluoro-HIPE more stable than the emulsion prepared using only CFS or other conventional stabilizers. Morphology of the prepared polyHIPE was easily controlled by altering the concentration of HA-Fe₃O₄ and/or CFS in the original formulation. Adjustment of the porous structure with open/close cells was performed and the average diameter of the pores tuned between 4.9 and 23 μm. With the increase in specific surface area by using nanoparticles (NPs) and CFS as co-surfactants, Pickering HIPE monoliths adsorbed double amount of oil compared to foams based solely on HIPE template. Multiple functional groups were bound onto Fe₃O₄ NPs through HA modification that made the fluoro-monolith capable of adsorbing dye, i.e. methylene blue, from water. A simple centrifugation enabled regeneration of the oil soaked foams and adsorption capacity was not decreased after 10 adsorption/regeneration cycles.     

Identification and characterization of organic nanoparticles in food

Interest in nanoparticles (NPs) has increased explosively over the past two decades. Using NPs, high loadings of vitamins and health-benefit actives can be achieved in food, and stable flavors as well as natural food-coloring dispersions can be developed. Detection and characterization of NPs are essential in understanding the benefits as well as the potential risks of the application of such materials in food. While many such applications are described in the literature, methods for detection and characterization of such particles are lacking. Organic NPs suitable for application in food are lipid-, protein- or polysaccharide-based particles, and this review describes current analytical techniques that are used, or could be used, for identification and characterization of such particles in food products. We divide the analytical approaches into four sections: sample preparation; separation; imaging; and, characterization.We discuss techniques and reported applications for NPs or otherwise related particle compounds. The results of this investigation show that, for a successful characterization of NPs in food, at least some kind of sample preparation will be required. While a simple sample preparation may be satisfactory for imaging techniques for known analytes, for other techniques, a further separation using chromatography, field-flow fractionation or ion-mobility separation is necessary. Subsequently, photon-correlation spectroscopy and especially mass spectrometry techniques as matrix-assisted laser desorption/ionization combined with time-of-flight mass spectrometry, seem suitable techniques for characterizing a wide variety of organic NPs.     

Preparation and characterization of biodegradable poly(isobutylcyano acrylate) nanoparticles with the surface modified by the adsorption of proteins

The purpose of this work was to develop and characterize a biodegradable colloidal drug carrier which avoids uptake by the mononuclear phagocyte system. In order to imitate the cell surface, a sialic-acid-rich glycoprotein (human orosomucoid) was adsorbed onto poly(isobutylcyano acrylate) nanoparticles. The adsorption of human serum albumin and asialo-orosomucoid was also tested as a control. The adsorption was found to be dependent on the pH value and reached its maximum at a pH value close to the isoelectric point (pI) of each protein. The increase in the ionic strength due to the addition of NaCl generally resulted in an increase in the amount adsorbed. Considering the amounts of protein adsorbed (maximum of 4.5 mg m⁻²), the adsorption was assumed to be of the monolayer type. The adsorption kinetics performed at the pI of each protein showed that the equilibrium was reached within 1 h for albumin and within 8 h for the two glycoproteins. This significant difference suggested that conformational rearrangements could be much slower for the two glycoproteins than for the non-glycosylated albumin. The protein layer was found to be stable at pH 7 when the adsorption was performed beforehand at the pI, i.e. at an acidic pH. Finally, using hydrophobic interaction chromatography, the surface of the coated nanoparticles was found to be much more hydrophilic than the surface of the unmodified nanoparticles.     

Synthesis and characterization of copper nanoparticles by reducing agent

Cu nanoparticles were synthesized by solution reduction process successfully. The influence of parameters on the size of Cu nanoparticles was studied and the referential process parameters were obtained. The morphology and structure of the synthesized Cu nanoparticles were characterized by transmission electron microscopy (TEM), powder X-ray diffraction (XRD), QELS data, infrared spectroscopy (IR) and solid state UV. The average size of nanoparticles was found between 15 ± 2 nm.     

Electrochemical detection and characterization of nanoparticles: A potential tool for environmental purposes

The incorporation of engineered nanoparticles in commercial products and industrial processes has broadly increased in recent years, which raises concerns about their environmental impact. In this review, we present electrochemistry as a promising analytical tool towards the detection and characterization of nanoparticles for environmental purposes. Recent research has not only demonstrated the applicability of electrochemical methods for the quantification of nanoparticles in environmental samples, but also for the study of properties and transformations of nanoparticles. All these aspects are very relevant to understand their toxicity in the environment. In this context, we discuss several electrochemical methods to quantify and study the size and shape, surface properties, interparticle interactions, chemical reactivity and speciation of nanoparticles.     

Impact of Al nanoparticles upon the microstructure and wear properties of Ni-Cr-Al nanocomposite coatings

Ni–7Cr and Ni–7Cr–2Al (wt.%) nanocomposite coatings were fabricated by co-electrodeposition of Ni with Cr (40 nm) or and Al (75 nm) nanoparticles from a nickel sulfate bath, their microstructure, friction and wear performance were comparably evaluated in order to elucidate the effect of Al nanoparticles on the properties of nanocomposite coatings. The results indicated that the co-deposition of minor Al nanoparticles significantly increases the microhardness and wear resistance because Al nanoparticles with surface amorphous oxides layers exert the dispersion-strengthening effect like Al₂O₃ nanoparticles.     

Selective ordering of surfactant modified gold nanoparticles in a diblock copolymer

Ordered aggregation of thiol-passivated Au nanoparticles in a diblock copolymer polystyrene-b-poly(methyl methacrylate) has been observed. The morphology of the diblock copolymer/Au-nanocomposite was dependent on the composition of the thiol modifier. For the thiol modifier that does not preferentially interact with one of the blocks, a perpendicular (relative to the substrate) lamellar morphology is maintained. However, for a thiol with a surfactant structure similar to one of the blocks, we observed a parallel lamellar morphology and speculate that the nanoparticles have localized at the microdomain interface. These conclusions are based on transmission electron microscopy, angle-dependent X-ray photoelectron microscopy and tensiometry. These results are consistent with theoretical predictions on the hybrid systems composed of block copolymers and nanoparticles.     

Catalytic effect of Pd nanoparticles on electroless copper deposition

This study elucidates the application of Pd nanoparticles as catalysts of electroless copper deposition and their catalytic effect on the deposition kinetics and microstructure in an electroless copper bath. Quartz crystal microgravimetry (QCM) and high-resolution field emission scanning electron microscopy (FE-SEM) with energy dispersive X-ray spectroscopy (EDX) demonstrated that the kinetic changes associated with electroless copper deposition (ECD) comprised two stages—the incubation period and the acceleration period. In the incubation period, small copper particles were deposited. In the acceleration period, the ECD rate increased rapidly and continuously conducting films with large grains were formed. Leaner sweep voltammetry (LSV) and mixed potential theory (MPT) were applied to examine the catalytic powers of the prepared Pd nanoparticles and the related electrochemical kinetics in the ECD bath.     

Interaction of similarly charged surfaces mediated by nanoparticles

We study the interaction between two like charged surfaces embedded in a solution of oppositely charged multivalent rod-like counterions.The counterions consist of two rigidly bonded point charges,each of valency Z.The strength of the electrostatic coupling increases with increasing surface charge density or valency of the charges.The system is analyzed by employing a self-consistent field theory,which treats the short and long range interactions of the counterions within different approximations.We find that in the weak coupling limit,the interactions are only repulsive.In the intermediate coupling regime,the multivalent rod-like counterions can mediate attractive interactions between the surfaces. For sufficiently long rods,bridging contributes to the attractive interaction.In the strong coupling limit,the charge correlations can contribute to the attractive interactions at short separations between the charged surfaces.Two minima can then appear in the force curve between surfaces.     

Analytical chemistry of metallic nanoparticles in natural environments

The use of metallic nanoparticles (NPs) has exponentially increased in the past decade due to their unique physical and chemical properties at nano-scales [1]. They are added to a myriad of materials and compositions. The key question is not if NPs will enter environmental compartments but rather when. The fate and the stability of NPs in the environment play important roles in determining their environmental distributions and probably control the risk to human health through exposure. Emissions of nanomaterials (NMs) could be intentional or unintentional but occur in particulate, aggregate or embedded states.Despite environmental transformations and changes in their surrounding environment, metallic NPs (M-NPs) tend to exist as stable colloidal aggregates or dispersions. Characterizing NPs and NMs in environmental samples implies determination of their size, their chemical composition and their bulk concentrations in the matrix. Differential size filtration is the most commonly used method to isolate NPs from aqueous matrices. Micro-filtration, nano-filtration, cross-flow filtration, and ultracentrifugation are usually employed to achieve the highest degree of segregation.Chemical characterization of NPs and NMs has traditionally been done using transmission/scanning electron microscopy (TEM/SEM) followed by energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). However, because of their intrinsic limitations, methods have also been combined and validated [e.g., size exclusion and ion chromatography (SEC and IC) with multi-element detection {inductively-coupled plasma mass spectrometry and optical emission spectroscopy (ICP-MS and ICP-OES)].This review describes the current state and the challenges of isolating, segregating and detecting M-NPs in environmental samples. A simple case study shows a common procedure for the analysis of NPs in complex aqueous matrices.     

Self-assembled ultra-thin coatings of octadecyltrichlorosilane (OTS) formed at the surface of iron oxide nanoparticles

In a series of experiments, we coated iron oxide nanoparticles, which were originally stabilized with lauric acid, with a polymer layer of Octadecyltrichlorosilane (OTS). Characterization of the different coated nanoparticles was accomplished by Static and Dynamic Light Scattering, acoustic spectroscopy, and Atomic Force Microscopy. In various experiments, we systematically investigated the effect of different parameters such as the OTS concentration and iron oxide content on the particle size of the coated nanoparticles. It was recognized that the size of the coated nanoparticles mainly depend on the concentration of OTS (C _OTS) measured with respect to the concentration of the iron oxide particles (C _mag.). Below a well-defined threshold value of C _OTS /C _mag, we did not observe any adsorption of OTS on the surface of iron oxide nanoparticles. The particle size of OTS-coated iron oxide nanoparticles increased rapidly at concentration ratios above the threshold concentration and reached a typical plateau value for long periods of time.