Simultaneous Removal of Heavy Metals (Cu,Cd, Cr,Ni, Zn and Pb) from Aqueous Solutions Using Thermally Treated Romanian Zeolitic Volcanic Tuff

Increased concentrations of heavy metals in the environment are of public health concern, their removal from waters receiving considerable interest. The aim of this paper was to study the simultaneous adsorption of heavy metals (Cu, Cd, Cr, Ni, Zn and Pb) from aqueous solutions using the zeolitic volcanic tuffs as adsorbents. The effect of thermal treatment temperature, particle size and initial metal concentrations on the metal ions sorption was investigated. The selectivity of used zeolite for the adsorption of studied heavy metals followed the order: Pb > Cr > Cu > Zn > Cd > Ni. The removal efficiency of the heavy metals was strongly influenced by the particle sizes, the samples with smaller particle size (0–0.05 mm) being more efficient in heavy metals removal than those with larger particle size (1–3 mm). Generally, no relevant changes were observed in heavy metals removal efficiency for the treatment temperatures of 200 °C and 350 °C. Moreover, at a higher temperature (550 °C), a decrease in the removal efficiencies was observed. The Cd, Zn, Cu, Cr, Zn and Ni sorption was best described by Langmuir model according to the high values of correlation coefficient. The pseudo-first-order kinetic model presented the best correlation of the experimental data.     

Preconcentration and Fractionation of Cd, Co, Cu, Ni, Pb and Zn in Natural Water Samples Prior to Analysis by Inductively Coupled Plasma Atomic Emission Spectrometry

The strong cation exchanger Dowex 50W-x4 was used for the enrichment of traces of Cd, Co, Cu, Fe, Ni, Pb and Zn in mineral and mine waters as an alternative to the commonly applied procedures based on the application of chelating resins. The resin used was found suitable for complete retention of these metals both from the solutions of very low pH as well as those close to neutral, thus eliminating the need to buffer the samples. An analytical scheme based on filtration and solid phase extraction with Dowex 50W-x4 was proposed for partitioning Cd, Co, Cu, Fe, Ni and Pb in the examined waters. The fraction of metals associated with the suspended particles was determined after filtration through a 0.45 µm pore size filter and decomposition of the deposited matter. For the evaluation of fractions of the labile metal species and the total dissolved metals, the untreated filtrates and the solutions resulting from their digestion, respectively, were passed through Dowex 50W-x4 cation exchange columns. The retrieval of the metals was completed using a 4.0 mol L⁻¹ solution of HCl. The described metal preconcentration and fractionation protocol offered the enrichment factor of 25 with detection limits equal to 22, 30, 92, 41, 70, 36 and 340 ng L⁻¹, respectively for Cd, Co, Cu, Fe, Ni and Pb. Reasonably good precision and accuracy were attained.     

贵阳污灌区菜地土壤团聚体中有机碳和重金属的含量特征及相关性分析

以贵阳某污灌区菜地土壤为研究对象,分别采用微波消解-电感耦合等离子体质谱(ICP-MS)法和水合热重铬酸钾氧化分光光度法分析不同粒径土壤团聚体中重金属和有机碳的含量特征,并对有机碳和重金属的相关性进行分析。结果表明,以2mm粒径团聚体的含量为最高,约占75%。Cu、Zn、Cd和Pb在0.25～0.5mm粒径团聚体中含量最高,Cr在5～8mm粒径团聚体中含量最高,As在不同粒径团聚体中的含量变化不大,重金属含量随土层深度增大而减小。土壤重金属富集因子表现为CuPbCdZnCrAs,Cu、Zn、Cd和Pb在0.25～0.5mm粒径团聚体中分布因子最高,而在5～8mm粒径团聚体中重金属的质量负载因子最大。土壤有机碳含量随团聚体粒径的增大表现为先增大后减小,不同粒径团聚体中Cu、Cd、Pb和As含量与有机碳含量均呈显著正相关(p0.05)。污灌区菜地土壤Cr、As在5～8mm粒径团聚体中富集现象显著,Cu、Zn、Cd、Pb在0.25～0.5mm粒径团聚体中均表现出显著的富集特征。6种重金属在5～8mm粒径团聚体中的质量负载因子均为最高,表明6种重金属在5～8mm粒径团聚体中的贡献最大。     

Solution and particle effects on the biosorption of heavy metals by seaweed biomass

Biosorption of cadmium (Cd), cobalt (Co), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn) by six fractions of particle sizes, ranging from 0.063 to 1.4 mm of dry marine algal biomass ofSargassum fluitans andAscophyllum nodosum, is examined. Equilibrium metal uptake by larger particles was higher than that by smaller particles in the order of Pb > Cd > Cu > Co > Zn > Ni for both biomass types, withS. fluitans sorbing slightly more thanA. nodosum. Uptakes of metals ranged from the highest, q_max = 369 mg Pb/g (particle size 0.84–1.00 mm), to the low Zn and Ni uptakes, q_max = 77 mg/g (size 0.84–1.00 mm) for S.fluitans. A. nodosum adsorbed metals in the range from q_max = 287 mg Pb/g (particle size 0.84–1.00 mm) to q_max = 73 mg Zn/g (particle size 0.84-1.00mm). Harder stipe fractions of S.fluitans demonstrated generally higher metal uptakes than the softer fractions derived from its blades (leaves). The pH dependence of the Zn uptake byS. fluitans exhibited a S-shaped curve between pH 1.5 and pH 7, with 50% of the maximum (pH 7.0) uptake at pH 3.5. Monovalent Na and K ions at higher concentrations inhibited the biosorption of Zn byS. fluitans. A significant inhibition started at 50 mM potassium chloride or sodium acetate, and at 1M the biosorption was completely blocked.     

Quantitative SPLITT fractionation of lagoon sediments

In this work, SPLITT Fractionation (split flow thin cell) is used to sort hydrodynamically sedimented particles coming from the Sacca di Goro, a lagoon-like system close to the Po River delta (Italy). First the possibility of performing quantitative mass separations with a SPLITT cell apparatus was checked on a standard silica sample of known particle size distribution (PSD). Environmental sediment samples and relative SPLITT sub-fractions were subject to Inductive Coupled Plasma--Atomic Emission Spectroscopy (ICP-AES) characterization for the following elements: Al, Fe, Cd, Cr, Cu, Ni, Mn, Pb and Zn. The distribution of these metals by particle size fractions has been investigated. The accuracy of the entire separation procedure has been also evaluated.     

Particle size distribution of mineral phases and metals in dusts collected at different workplaces

Summary Airborne dusts were collected by a two-stage sampler on an electrically activated filter at different working places. Inhalable size (particles are less than 5 m) and course fractions were separated by a cyclone. The particle size distribution of three minerals (quartz, calcite, albite) and four metals (Pb, Cd, Cr, Co) was determined. Infrared spectroscopic and AAS methods were applied. The quartz concentrated in the course fractions while the calcite in the inhalable ones. No direct relation to the size fractions was found for albite. The toxic metals were extremely enriched in the fine fractions, in some cases 5–12 times more than in the course fractions. Since only the fine particles might be deposited in the deepest parts of the lung the importance of elimination of pollution sources should be taken into account.     

黔产市售绿茶重金属的含量特征及健康风险评估

为研究黔产市售绿茶中重金属的含量分布特征及健康风险,以五个生产加工地的黔产市售绿茶为研究对象,分析其9种重金属(Pb、Cr、Cd、Hg、Cu、Zn、Mn、Ni和As)含量,利用美国环境保护署(USEPA)推荐的健康风险评价模型进行人体重金属的健康风险评价。结果表明,五种茶叶中Cr、Cd、Pb、Hg、Cu和As含量均低于国家限量标准。黔产市售绿茶的重金属浸出率大小次序为Zn>Mn>Hg>As>Cd>Pb>Cr>Cu>Ni。健康风险评价结果表明,五个产地的绿茶中重金属通过饮茶途径所产生的健康危害个人年风险大小次序为Cd>As>Mn>Ni>Cr>Hg>Pb>Zn>Cu,茶叶中重金属通过饮茶途径所产生的个人健康危害年风险总和为4.33×10-6~5.73×10-6 a-1,均低于USEPA和ICRP推荐的最大可接受风险水平,表明重金属引起的健康危害极小,其对暴露人群造成的健康危害可忽略不计,绿茶中重金属均处于安全范围内。     

Trace metal accumulation in tissues of sole (Solea senegalensis) and the relationships with the abiotic environment

The distribution patterns and the organ-specific accumulation trends of 10 trace metals (iron, manganese, zinc, copper, chromium, nickel, cobalt, lead, cadmium and silver) and 4 major elements (sodium, potassium, calcium and magnesium) in 10 different tissues (heart, muscle, kidney, stomach, intestine, liver, gill, gonads, white skin and dark skin) of a benthic fish species (Solea senegalensis) from a densely populated coastal area affected by anthropogenic activities, the Bay of Cadiz (SW Spain), have been investigated. High variability of metal concentrations among tissues were found for Ca, Fe, Zn, Cu, Pb and Ag. Factor analysis was applied to study this variability. Five principal components were found explaining the 92.95% of the total variance and similarities in behavioural patterns of bioaccumulation were described. They associated Mg, Cr, Ni and Mn to intestine and stomach tissues (PC1), Ag, Cu and Cd to liver (PC2), Zn, K and Co to gonads (PC3), Na, Fe and Pb to gill, heart and kidney tissues (PC4) and Ca, Pb and Mn to gill and dark skin (PC5). The metallic concentration in the sediment and water was also studied. The pollution in this area was found moderate with outstanding values of Zn, Cu and Pb (average values of 139, 50.4 and 75.6?mg?kg^?1, respectively) in sediment and dissolved Cu (average value of 2.5?µg?L^?1). Metal bioconcentration trends followed the order Zn?>?Cu?>?Cd?>?Pb for dissolved metals in seawater, Cu?>?Zn?>?Cd?>?Pb?≈?Mn?>?Fe?≈?Ni?≈?Co for metals associated to particulate matter and Zn?≈?Cu?>?Cd?>?Mn?>?Co?≈?Fe?>?Ni?≈?Pb?>?Cr for metals in the sediment. Higher values were found for copper in liver, zinc in gonads and lead in gill, showing the relationship between biotic and abiotic environment. In addition, Cd bioconcentration factors were found high in liver and gill showing the sensitivity of sole to this metal even at low concentrations.     

Assessment of trace metals contamination in estuarine sediments using a sequential extraction technique and principal component analysis

Fractionation of the metals Cd, Cr, Cu, Ni, Pb and Zn in sediments was performed for samples collected from eight locations in the Poxim river estuary of Sergipe State, northeast Brazil, using the 3-stage sequential extraction procedure proposed by the European Community Bureau of Reference (BCR). The extraction method was found to be satisfactory for analysis of certified reference material BCR-701, with recovery values ranging from 85% (Cu) to 117% (Cr). The detection limits obtained were 0.001 to 0.305 µg g^− 1. Zn exhibited greatest mobility and bioavailability, indicative of anthropogenic sources, while Cr was mainly found in the residual fraction and could be used as an indicator for the contribution from natural sources. Cd, Cu, Ni and Pb were associated with the oxidizable fraction, and Pb, Cr and Ni with the reducible fraction. Principal component analysis (PCA) clearly separated the metals into three groups: I (Zn); II (Pb); III (Cd, Cu, Cr and Ni). These groupings were mainly due to different distributions of the metals in the various fractions, in sediments from the different locations. Risk assessment code (RAC) analysis indicated that although the metals presented a moderate overall risk to the aquatic environment, nickel showed a low risk (RAC < 10%) at three sites, while zinc presented a high risk (RAC > 30%) at four other sites.     

Assessment of the health of a river ecosystem due to the impact of pollution from industrial discharge using instrumental neutron activation analysis and inductively coupled plasma-mass spectrometry

Inductively coupled plasma-mass spectrometry (ICP-MS) and neutron activation analysis (NAA) were employed in the determination of heavy metal concentrations in water, plant and sediment samples to assess the extent of heavy metal pollution in a river system which is located within an industrial zone. Elemental concentrations of As, Pb, Hg, Cr, Cu, Cd, Ni and Zn were measured in the samples. Statistical analysis was performed on the data obtained to look for trends in the pollution pattern of these elements on the river system. The trend in concentrations of heavy metals pollution in water samples is in the order of Zn > Cu > Ni > Cr > As > Pb > Hg > Cd, whereas in plants the order is Zn > Cr > Cu > Pb > Ni > As > Hg > Cd and in sediments Zn > Cu > Pb > Ni > As > Hg.     

Evaluation of serum metal profile in relation to biri smoking using ICP-MS

The metals intake through tobacco smoking is associated with adverse effects for human health. The present study was aimed to understand the effects of biri smoking on smoker’s serum metal profile. Seven metals, cadmium (Cd), nickel (Ni), lead (Pb), chromium (Cr), copper (Cu), iron (Fe) and zinc (Zn), were analysed in serum samples of 20 biri smokers and 20 non-smokers from North India. The Cd, Ni, Pb, Cr and Cu concentrations were higher while Fe and Zn concentrations were lower in smokers compared to non-smokers. The Fe concentrations, the highest among all metals, seemed to be unassociated with the smoking activity. This study indicated that biri smoking is a contributor to the body burden of Cd, Ni, Cu and Cr in the smoker’s body. The Cd, Ni, Cu and Fe concentrations are non-significantly associated with the age of smokers at p < 0.01 significance level, whereas Pb and Cr concentrations increase and Zn concentrations decrease with the increase in the age of smokers. Serum metal concentrations in the smoker subjects of North India are higher compared to the results of other similar studies. This could be linked to the poor quality of tobacco used in biri. We recommend conducting more detailed and controlled studies in this regard as a smoker is also subjected to other sources of exposure to metals.     

Determination of heavy metals at the pg/g level in Antarctic snow with DPASV and IDMS

Summary Differential pulse anodic stripping voltammetry (DPASV) and isotope dilution mass spectrometry (IDMS) were used to analyse heavy metals in Antarctic snow samples. It was possible to determine Pb and Cd with DPASV at the German Antarctic station Georg-von-Neumayer whereas the analyses of Pb, Cd, Tl, Cr, Ni, Cu, Zn, and Fe with IDMS were carried out at the University of Regensburg. 80% of the elemental concentrations in surface snow samples analysed with IDMS lay in the following ranges: Pb=3–40 pg/g, Cd<0.2–3 pg/g, Tl<0.2 pg/g, Cr<0.8–15 pg/g, Ni<4.8–40 pg/g, Cu<11–30 pg/g, Zn=30–500 pg/g, and Fe=(0.5–1.5)×10³ pg/g. In most cases an acceptable agreement between the DPASV and IDMS results was obtained for Pb and Cd. More than 50% of all Pb analyses agreed within a deviation of 0–10 pg/g. The Cd results between both methods usually deviated by less than 1 pg/g. Slightly higher Pb concentrations were analysed in the average with IDMS compared with DPASV. This effect was not observed for the Cd data. A possible explanation for this fact are non-ionic Pb species in the melted snow samples, which cannot be analysed by DPASV. One particular investigation of Pb concentrations showed that the analysed data with DPASV decreased with the increasing length of sun-shine after a snowfall when samples of the same origin were determined. Blank control is the major requirement for accurate analysis results of heavy metals in this low concentration range. On the other hand, accuracy must always be tested by independent analytical methods. In this work it is shown that Pb and Cd can be analysed directly in the Antarctica with DPASV and that the result of this method is in acceptable agreement with the definitive method IDMS.

---

Bestimmung von Schwermetallen im pg/g Bereich in antarktischen Schneeproben durch differentielle Pulsinversvoltammetrie und massenspektrometrische Isotopenverdünnungsanalyse

     

Spatial distribution and contamination assessment of heavy metals in urban road dusts from Urumqi,NW China

This study reports the spatial distribution pattern and degree of heavy metal pollution (Cd, Cr, Cu, Ni, Pb, Mn, Be, Co, Zn and U) in 169 urban road dust samples from urban area of Urumqi city. The spatial distribution pattern shows that Cu, Pb, Cr and Zn have similar patterns of spatial distribution. Their hot-spot areas were mainly associated with main roads where high traffic density was identified. Ni and Mn show similar spatial distributions coinciding with the industrial areas, while the spatial distribution patterns of Co and U show hot-spot areas were mainly located in the sides of the urban area where the road dust was significantly influenced by natural soils. The spatial distributions of Be and Cd were very different from other metals. The geo-accumulation index suggests that road dust in Urumqi city was uncontaminated to moderately contaminated with Cd, Cu, Ni, Pb, Mn, Be, Zn and U. The integrated pollution index shows IPIs of all road dust samples were higher than 1, suggesting that the road dust quality of Urumqi city has clearly been polluted by anthropogenic emission of heavy metals. Moreover, the spatial distribution pattern of IPIs also shows several distribution trends in the studied region.     

Spatial distribution and contamination assessment of heavy metals in urban road dusts from Urumqi, NW China

This study reports the spatial distribution pattern and degree of heavy metal pollution (Cd, Cr, Cu, Ni, Pb, Mn, Be, Co, Zn and U) in 169 urban road dust samples from urban area of Urumqi city. The spatial distribution pattern shows that Cu, Pb, Cr and Zn have similar patterns of spatial distribution. Their hot-spot areas were mainly associated with main roads where high traffic density was identified. Ni and Mn show similar spatial distributions coinciding with the industrial areas, while the spatial distribution patterns of Co and U show hot-spot areas were mainly located in the sides of the urban area where the road dust was significantly influenced by natural soils. The spatial distributions of Be and Cd were very different from other metals. The geo-accumulation index suggests that road dust in Urumqi city was uncontaminated to moderately contaminated with Cd, Cu, Ni, Pb, Mn, Be, Zn and U. The integrated pollution index shows IPIs of all road dust samples were higher than 1, suggesting that the road dust quality of Urumqi city has clearly been polluted by anthropogenic emission of heavy metals. Moreover, the spatial distribution pattern of IPIs also shows several distribution trends in the studied region.     

Evaluation of vermicompost as bioadsorbent substrate of Pb,Ni, V and Cr for waste waters remediation using Total Reflection X-ray Fluorescence

The use of vermicompost as adsorbent substrate for removing Pb, Ni, V and Cr from waste waters is proposed. In this work, after a preliminary physical and chemical characterization of the vermicompost, the optimal parameters for the heavy metal adsorption were obtained. A synthetic multielemental solution of Pb, Cr and Ni and a solution of NH₄VO₃ for vanadium were evaluated. The optimized parameters were pH, vermicompost mass to volume ratio, agitation time and particle size of the adsorbent. A batch system was employed for the assays. The elements were determined in the supernatant solution after filtration of the substrate. An optimal pH of 4.5 was found for ion removal. The agitation time slightly influences the adsorption of Pb and Cr, but it has a high influence on the Ni and V adsorption. The highest adsorption and removal of the metals was observed for a vermicompost mass of 2 g per 500 mL using a particle size between 75 to 841 µm for Pb, Cr and Ni, and 841 till 1192 µm for V. The mean removal percentage for each element is around 95% for Pb. Ni and Cr in the multielemental synthetic sample, demonstrating a high removal capacity of the substrate. For V it was found a removal efficiency of 50%.     

Heavy metals contamination in roadside soil near different traffic signals in Dubai,United Arab Emirates

The present research was conducted to study heavy metal contamination in roadside soil viz. (i) at sites having more than two traffic signals (ii) roads having only one traffic signal and (iii) roads having no traffic signals. The samples were collected and analyzed for seven heavy metals i.e. cadmium (Cd), lead (Pb), copper (Cu), nickel (Ni), iron (Fe), manganese (Mn) and zinc (Zn) by Atomic Absorption Spectroscopy (AAS) following the acid digestion of the respective soil samples. The range of the metals observed in soil having more than two traffic signals were Cd (0.17–1.01), Pb (259.66–2784.45), Cu (15.51–65.90), Ni (13.31–98.13), Fe (325.64–5136.37), Mn (57.95–166.43), and Zn (91.34–166.43) mg kg^?1 respectively. Similarly, the range of metals analyzed in samples collected from the roadside having only one traffic signal were Cd (nd–0.80), Pb (145.95–308.09), Cu (0.82–18.04), Ni (18.29–59.36), Fe (88.51–3649.42), Mn (25.88–147.34) and Zn (8.97–106.11 mg kg ^?1) respectively. However, the range of metals at roads having no traffic signals were Cd (0.0–0.57), Pb (8.34–58.20), Cu (2.88–5.81), Ni (3.34–73.80), Fe (55.34–332.81), Mn (2.98–98.73) and Zn (1.23–46.6 mg kg^?1) respectively. Cd, Cu, Ni, Fe, Mn and Zn in soil were present within the normal range of background levels, whereas lead was reported in high concentration. The level of lead had a correlation with the traffic density attributing its origin to vehicular exhaust. The values from three different sites of monitoring suggest that automobiles are a major source of the studied metals for the roadside environment.     

Desorption of Heavy Metals from Typical Soil Components (Clay,Peat) with Glycine

Abstract

Natural organic chelating agents take part in the mobilization and translocation of heavy metals in unpolluted and polluted soils. They also have to be considered as possible extracting agents for the decontamination of heavy metal polluted soils. For an assessment of the desorption capability of glycinc, heavy metals (Cd, Cu, Ni, Pb, Zn) were adsorbed onto typical soil components (bentonite and peat). The metal loaded sorbents were resuspended in aqueous solutions of glycine at pH 7.0 and 4.5 and the quantities of the desorbed metals were analysed in the liquid phase. Furthermore, the dependency of the desorption rate on the duration of experiments and the metal content were investigated. The remobilization of heavy metals from bentonite by glycine at pH 7.0 decreases following the order Cu > Ni > Zn > Cd > Pb and ranges from 95% to 9.5%. The desorption rate was significantly lower at pH 4.5 and in suspensions of peat.     

Study of traffic pollution by metals in Seville (Spain) by physical and chemical speciation methods

Eighty-three samples of atmospheric particles were collected at a representative traffic site in the Mediterranean city of Seville during a period of one year. Urban particles were collected on quartz filters with a high-volume sampler coupled with a cascade impactor which separates particles into six size ranges: >10, 10–4.9, 4.9–2.7, 2.7–1.3, 1.3–0.6, and <0.6 m. The total metal content, its distribution by size (physical speciation), and the concentrations of different chemical forms (chemical speciation) in particles less than 0.6 m were determined. The chemical speciation scheme furnished four fractions: soluble and exchangeable metals; carbonates, oxides, and reducible metals; oxidisable and sulfidic metals bound to organic matter; and residual metals. The samples were analysed by ICP–OES for Pb, Ni, Cd, S, Fe, Zn, Cu, Ba, Mn, and V. Gaseous pollutants, traffic intensities, and primary meteorological data provided by the atmospheric and traffic networks were statistically related to the analytical data. Analytical and statistical results from physical and chemical speciation singled out Ba as a valid tracer of vehicular traffic, instead of Pb, in cities with high traffic density. Another important relationship was found between Pb and Cu. Physical speciation of lead showed that the major risk for health was from fine particles less than 2.7 m, because particles between 2.7 and 0.6 m were the size fractions of the total suspended particles with the major mass abundance of lead (mainly particles between 2.7 and 1.3 m) and because particles less than 0.6 m were the fraction of airborne particles most abundant in the urban air. Chemical speciation results showed that special attention must be taken with Ni and Cd concentrations, because of their high potential bioavailability, mainly a result of the high solubility of the chemical forms of Ni in the finest particles.     

Studies on tetrachlorodithizone isomers and their applications to the extraction of metal ions

Six isomeric tetrachlorodithizones were synthesized and their electronic and i.r. spectra were measured. Their acid dissociation constants and partition coefficients between 0.5 M NaClO₄ solution and carbon tetrachloride are reported. Their extraction equilibria with Cd(II). Co(II), Cu(II), Hg(II), Ni(II), Pb(II), Tl(I), Zn(II) and Bi(III) and the spectrophotometric characteristics of the complexes formed are described. The 3,3',4,4'-tetrachloro isomer is spectrophotometrically more sensitive than dithizone for Zn, Pb, Hg(II) and Bi(III) whereas the 2,2',3,3'- and 2,2',5,5'-isomers are more sensitive for copper ions. For most of the metals tested, the tetrachlorodithizones allowed quantitative extraction at lower pH than is possible with dithizone.