垂直磁压电材料界面三维裂纹的超奇异积分法

应用有限部积分概念和广义位移基本解,垂直于磁压电双材料界面三维复合型裂纹问题被转 化为求解一组以裂纹表面广义位移间断为未知函数的超奇异积分方程问题. 进而,通过主部 分析法精确地求得裂纹尖端光滑点附近的奇性应力场解析表达式. 然后,通过将裂纹表面 位移间断未知函数表达为位移间断基本密度函数与多项式之积,使用有限部积分法对超奇异 积分方程组建立了数值方法. 最后,通过典型算例计算,讨论了广义应力强度因子的变化规 律.     

Application of hypersingular integral equation method to three-dimensional crack in electromagnetothermoelastic multiphase composites

A three-dimensional crack problem in electromagnetothermoelastic multiphase composites (EMTE-MCs) under extended loads is investigated in this paper. Using Green’s functions, the extended general displacement solutions are obtained by the boundary element method. This crack problem is reduced to solving a set of hypersingular integral equations coupled with boundary integral equations, in which the unknown functions are the extended displacement discontinuities. Then, the behavior of the extended displacement discontinuities around the crack front terminating at the interface is analyzed by the main-part analysis method of hypersingular integral equations. Analytical solutions for the extended singular stresses, the extended stress intensity factors (SIFs) and the extended energy release rate near the crack front in EMTE-MCs are provided. Also, a numerical method of the hypersingular integral equations for a rectangular crack subjected to extended loads is put forward with the extended displacement discontinuities approximated by the product of basic density functions and polynomials. In addition, distributions of extended SIFs varying with the shape of the crack are presented. The results show that the present method accurately yields smooth variations of extended SIFs along the crack front.     

Mixed-mode stress intensity factors of 3D interface crack in fully coupled electromagnetothermoelastic multiphase composites

This contribution presents an extended hypersingular intergro-differential equation (E-HIDE) method for modeling the 3D interface crack problem in fully coupled electromagnetothermoelastic anisotropic multiphase composites under extended electro-magneto-thermo-elastic coupled loads through theoretical analysis and numerical simulations. First, based on the extended boundary element method, the 3D interface crack problem is reduced to solving a set of E-HIDEs coupled with extended boundary integral equations, in which the unknown functions are the extended displacement discontinuities. Then, the behavior of the extended singular stress indices around the interface crack front terminating at the interface is analyzed by the extended main-part analysis. The extended stress intensity factors near the crack front are defined. In addition, a numerical method for a 3D interface crack problem subjected to extended loads is proposed, in which the extended displacement discontinuities are approximated by the product of basic density functions and polynomials. Finally, the radiation distribution of extended stress intensity factors at the interface crack surface are calculated, and the results are presented toward demonstrating the applicability of the proposed method.     

同震断层三维裂纹扩展波动时域超奇异积分法

应用波动时域超奇异积分法将P波、S波和磁电热弹多场耦合作用下同震断层任意形状三维裂纹扩展问题转化为求解以广义位移间断率为未知函数的超奇异积分方程组问题;定义了广义应力强度因子,得到裂纹前沿广义奇异应力增量解析表达式;应用波动时域有限部积分概念及体积力法,为超奇异积分方程组建立了数值求解方法,编制了FORTRAN程序,以三维矩形裂纹扩展问题为例,通过典型算例,研究了广义应力强度因子随裂纹位置变化规律;分析了同震断层裂纹扩展中力、磁、电场辐射规律.      

梯度材料中矩形裂纹的对偶边界元方法分析

采用对偶边界元方法分析了梯度材料中的矩形裂纹. 该方法基于层状材料基本解,以非裂纹边界的位移和面力以及裂纹面的间断位移作为未知量. 位移边界积分方程的源点配置在非裂纹边界上,面力边界积分方程的源点配置在裂纹面上. 发展了边界积分方程中不同类型奇异积分的数值方法. 借助层状材料基本解,采用分层方法逼近梯度材料夹层沿厚度方向力学参数的变化. 与均匀介质中矩形裂纹的数值解对比,建议方法可以获得高精度的计算结果. 最后,分析了梯度材料中均匀张应力作用下矩形裂纹的应力强度因子,讨论了梯度材料非均匀参数、夹层厚度和裂纹与夹层之间相对位置对应力强度因子的影响.      

横观各向同性压电材料中裂纹问题的边界元法

采用Somigiliana公式给出了三维横观各向同性压电材料中的非渗漏裂纹问题的一般解和超奇异积分方程,其中未知函数为裂纹面上的位移间断和电势间断．在此基础上,使用有限部积分和边界元结合的方法,建立了超奇异积分方程的数值求解方法,并给出了一些典型数值算例的应力强度因子和电位移强度因子的数值结果,结果令人满意．     

Finite-part integral and boundary element method to solve three-dimensional crack problems in piezoelectric materials

Using the hypersingular integral equation method based on body force method, a planar crack in a three-dimensional transversely isotropic piezoelectric solid under mechanical and electrical loads is analyzed. This crack problem is reduced to solve a set of hypersingular integral equations. Compare with the crack problems in elastic isotropic materials, it is shown that for the impermeable crack, the intensity factors for piezoelectric materials can be obtained from those for elastic isotropic materials. Based on the exact analytical solution of the singular stresses and electrical displacements near the crack front, the numerical method of the hypersingular integral equation is proposed by the finite-part integral method and boundary element method, which the square root models of the displacement and electric potential discontinuities in elements near the crack front are applied. Finally, the numerical solutions of the stress and electric field intensity factors of some examples are given.     

Controlling parameter of the stress intensity factors for a planar interfacial crack in three-dimensional bimaterials

Numerical solutions of singular integral equations are discussed in the analysis of a planar rectangular interfacial crack in three-dimensional bimaterials subjected to tension. The problem is formulated as a system of singular integral equations on the basis of the body force method. In the numerical analysis, unknown body force densities are approximated by the products of the fundamental density functions and power series, where the fundamental density functions are chosen to express singular behavior along the crack front of the interface crack exactly. The calculation shows that the present method gives smooth variations of stress intensity factors along the crack front for various aspect ratios. The present method gives rapidly converging numerical results and highly satisfied boundary conditions throughout the crack boundary. The stress intensity factors are given with varying the material combination and aspect ratio of the crack. It is found that the stress intensity factors K_I and K_II are determined by the bimaterial constant ε alone, independent of elastic modulus ratio and Poisson’s ratio.     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

Arbitrarily oriented crack near interface in piezoelectric bimaterials

Arbitrarily oriented crack near interface in piezoelectric bimaterials is considered. After deriving the fundamental solution for an edge dislocation near the interface, the present problem can be expressed as a system of singular integral equations by modeling the crack as continuously distributed edge dislocations. In the paper, the dislocations are described by a density function defined on the crack line. By solving the singular integral equations numerically, the dislocation density function is determined. Then, the stress intensity factors (SIFs) and the electric displacement intensity factor (EDIF) at the crack tips are evaluated. Subsequently, the influences of the interface on crack tip SIFs, EDIF, and the mechanical strain energy release rate (MSERR) are investigated. The J-integral analysis in piezoelectric bimaterals is also performed. It is found that the path-independent of J₁-integral and the path-dependent of J₂-integral found in no-piezoelectric bimaterials are still valid in piezoelectric bimaterials.     

INTERFACIAL CRACK ANALYSIS IN THREE-DIMENSIONAL TRANSVERSELY ISOTROPIC BI-MATERIALS BY BOUNDARY INTEGRAL EQUATION METHOD

The integral-differential equations for three-dimensional planar interfacial cracks of arbitrary shape in transversely isotropic bimaterials were derived by virtue of the Somigliana identity and the fundamental solutions, in which the displacement discontinuities across the crack faces are the unknowns to be determined. The interface is parallel to both the planes of isotropy. The singular behaviors of displacement and stress near the crack border were analyzed and the stress singularity indexes were obtained by integral equation method. The stress intensity factors were expressed in terms of the displacement discontinuities. In the non-oscillatory case, the hyper-singular boundary integral-differential equations were reduced to hyper-singular boundary integral equations similar to those of homogeneously isotropic materials.     

Analysis method of planar interface cracks of arbitrary shape in three-dimensional transversely isotropic magnetoelectroelastic bimaterials

Using the fundamental solutions for three-dimensional transversely isotropic magnetoelectroelastic bimaterials, the extended displacements at any point for an internal crack parallel to the interface in a magnetoelectroelastic bimaterial are expressed in terms of the extended displacement discontinuities across the crack surfaces. The hyper-singular boundary integral–differential equations of the extended displacement discontinuities are obtained for planar interface cracks of arbitrary shape under impermeable and permeable boundary conditions in three-dimensional transversely isotropic magnetoelectroelastic bimaterials. An analysis method is proposed based on the analogy between the obtained boundary integral–differential equations and those for interface cracks in purely elastic media. The singular indexes and the singular behaviors of near crack-tip fields are studied. Three new extended stress intensity factors at crack tip related to the extended stresses are defined for interface cracks in three-dimensional transversely isotropic magnetoelectroelastic bimaterials. A penny-shaped interface crack in magnetoelectroelastic bimaterials is studied by using the proposed method.The results show that the extended stresses near the border of an impermeable interface crack possess the well-known oscillating singularity r^?1/2±iε or the non-oscillating singularity r^?1/2±κ. Three-dimensional transversely isotropic magnetoelectroelastic bimaterials are categorized into two groups, i.e., ε-group with non-zero value of ε and κ-group with non-zero value of κ. The two indexes ε and κ do not coexist for one bimaterial. However, the extended stresses near the border of a permeable interface crack have only oscillating singularity and depend only on the mechanical loadings.     

磁电热弹耦合材料三维多裂纹超奇异积分法

用超奇异积分方程法将多场耦合载荷作用下磁电热弹耦合材料内含任意形状和位置三维多裂纹问题转化为求解一以广义位移间断为未知函数的超奇异积分方程组问题,退化得到内含任意形状平行三维多裂纹问题的超奇异积分方程组;推导出平行三维多裂纹问题的裂纹前沿广义奇异应力场解析表达式、定义了广义(应力、应变能)强度因子和广义能量释放率;应用有限部积分概念及体积力法,为超奇异积分方程组建立了数值求解方法,编制了FORTRAN程序,以平行双裂纹为例,通过典型算例,研究了广义(应力、应变能)强度因子随裂纹位置、裂纹形状及材料参数变化规律,得到裂纹断裂评定准则. 最后,分析了裂纹间干扰、屏蔽作用及其在工程实际中的应用.      

A domain-independent integral for computation of stress intensity factors along three-dimensional crack fronts and edges by BEM

The present work deals with an evaluation of stress intensity factors (SIFs) along straight crack fronts and edges in three-dimensional isotropic elastic solids. A new numerical approach is developed for extraction, from a solution obtained by the boundary element method (BEM), of those SIFs, which are relevant for a failure assessment of mechanical components. In particular, the generalized SIFs associated to eigensolutions characterized by unbounded stresses at a neighbourhood of the crack front or a reentrant edge and also that associated to T-stress at the crack front can be extracted. The method introduced is based on a conservation integral, called H-integral, which leads to a new domain-independent integral represented by a scalar product of the SIF times some element shape function defined along the crack front or edge. For sufficiently small element lengths these weighted averages of SIFs give reasonable pointwise estimation of the SIFs. A proof of the domain integral independency, based on the bi-orthogonality of the classical two-dimensional eigensolutions associated to a corner problem, is presented. Numerical solutions of two three-dimensional problems, a crack problem and a reentrant edge problem, are presented, the accuracy and convergence of the new approach for SIF extraction being analysed.     

三维体内含垂直于双材料界面混合型裂纹的超奇异积分解法

利用双材料位移基本解和Somigliana公式,将三维体内含垂直于双材料界面混合型裂纹问题归结为求解一组超奇异积分方程。使用主部分析法,通过对裂纹前沿应力奇性的分析,得到用裂纹面位移间断表示的应力强度因子的计算公式,进而利用超奇异积分方程未知解的理论分析结果和有限部积分理论,给出了超奇异积分方程的数值求解方法。最后,对典型算例的应力强度因子做了计算,并讨论了应力强度因子数值结果的收敛性及其随各参数变化的规律。     

Analysis of bonded anisotropic wedges with interface crack under anti-plane shear loading

The antiplane stress analysis of two anisotropic finite wedges with arbitrary radii and apex angles that are bonded together along a common edge is investigated. The wedge radial boundaries can be subjected to displacement-displacement boundary condi- tions, and the circular boundary of the wedge is free from any traction. The new finite complex transforms are employed to solve the problem. These finite complex transforms have complex analogies to both kinds of standard finite Mellin transforms. The traction free condition on the crack faces is expressed as a singular integral equation by using the exact analytical method. The explicit terms for the strength of singularity are extracted, showing the dependence of the order of the stress singularity on the wedge angle, material constants, and boundary conditions. A numerical method is used for solving the resul- tant singular integral equations. The displacement boundary condition may be a general term of the Taylor series expansion for the displacement prescribed on the radial edge of the wedge. Thus, the analysis of every kind of displacement boundary conditions can be obtained by the achieved results from the foregoing general displacement boundary condition. The obtained stress intensity factors （SIFs） at the crack tips are plotted and compared with those obtained by the finite element analysis （FEA）.     

Elastic wave scattering from a penny-shaped interface crack in coated materials

This paper is concerned with the elastic wave scattering induced by a penny-shaped interface crack in coated materials. Using the integral transform, the problem of wave scattering is reduced to a set of singular integral equations in matrix form. The singular integral equations are solved by the asymptotic analysis and contour integral technique, and the expressions for the stress and displacement as well as the dynamic stress intensity factors (SIFs) are obtained. Using numerical analysis, this approach is verified by the finite element method (FEM), and the numerical results agree well with the theoretical results. For various crack sizes and material combinations, the relations between the SIFs and the incident frequency are analyzed, and the amplitudes of the crack opening displacements (CODs) are plotted versus incident wavenumber. The investigation provides a theoretical basis for the dynamic failure analysis and nondestructive evaluation of coated materials.     

Numerical solutions of two-dimensional anisotropic crack problems

A complete set of series form solutions of stress and displacement functions, including all higher order terms, around the crack tip for anisotropic crack problems have been newly derived by eigenfunction expansion approach. The analytical solutions of displacement functions were classified into four cases with respect to different types of complex parameters and different corresponding physical meanings. By employing these displacement functions as global interpolation functions, fractal two-level finite element method (F2LFEM) was applied to evaluate the stress intensity factors (SIFs) for various kinds of anisotropic crack problems. In the method of F2LFEM, the infinite number of nodal displacements was transformed to a small set of generalized coordinates by fractal transformation technique. New element matrices need not be generated and the singular numerical integration was avoided completely. Numerical examples of the four cases were studied and high accurate results of SIFs were obtained.     

Thermoelectroelastic Green's function and its application for bimaterial of piezoelectric materials

Summary For a two-dimensional piezoelectric plate, the thermoelectroelastic Green's functions for bimaterials subjected to a temperature discontinuity are presented by way of Stroh formalism. The study shows that the thermoelectroelastic Green's functions for bimaterials are composed of a particular solution and a corrective solution. All the solutions have their singularities, located at the point applied by the dislocation, as well as some image singularities, located at both the lower and the upper half-plane. Using the proposed thermoelectroelastic Green's functions, the problem of a crack of arbitrary orientation near a bimaterial interface between dissimilar thermopiezoelectric material is analysed, and a system of singular integral equations for the unknown temperature discontinuity, defined on the crack faces, is obtained. The stress and electric displacement (SED) intensity factors and strain energy density factor can be, then, evaluated by a numerical solution at the singular integral equations. As a consequence, the direction of crack growth can be estimated by way of strain energy density theory. Numerical results for the fracture angle are obtained to illustrate the application of the proposed formulation. Received 10 November 1997; accepted for publication 3 February 1998     

三维有限体平片裂纹的超奇异积分方程与边界元法

利用Ｓｏｍｉｇｌｉａｎａ公式及有限部积分的概念，导出了含任意平片裂纹三维有限体问题的超奇异积分方程组，并联合使用有限部积分与边界元法，建立了数值求解方法．在裂纹前沿附近单元，采用与理论分析一致的平方根位移模型，以提高数值结果的精度．最后计算了若干典型例子的应力强度因子．