Adsorption isotherms on nicotinamide-imprinted polymer stationary phase

The molecular-imprinted technique is applied for the preparation of a polymer selector by using methacrylic acid as functional monomer, ethyleneglycol dimethacrylate as the cross-linker, 2,2'-azobisisobutyronitrile as the initiator, and nicotinamide as the template. The adsorption isotherms of nicotinamide and nicotinic acid and the competitive adsorption isotherms of nicotinamide and nicotinic acid on the imprinted stationary phase are determined using rectangular pulse frontal analysis and static method. Aqueous solution is used as the mobile phase in frontal analysis. It is found that the adsorption data fit well to both Langmuir and Freundlich isotherm models.     

Aqueous chromatographic system for separation of biomolecules using thermoresponsive polymer modified stationary phase

We have investigated a new method for HPLC using packing materials modified with a functional polymer, such as thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm). PNIPAAm-modified silica exhibits temperature-controlled hydrophilic-hydrophobic surface property changes in aqueous systems. Temperature-responsive chromatography is performed with an aqueous mobile phase without using an organic solvent. We designed ternary copolymers of NIPAAm introduced 2-(dimethyl-amino) ethyl methacrylate (DMAEMA) as a cationic monomer and butyl methacrylate (BMA) as a hydrophobic monomer. A cationic thermoresponsive hydrogel grafted surface would produce an alterable stationary phase with both thermally regulated hydrophobicity and charge density for separation of bioactive compounds. In this study, we achieved successful separation of lysozyme without the loss of bioactivity by temperature-responsive chromatography. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules.     

Effect of reaction solvent on the preparation of thermo-responsive stationary phase through a surface initiated atom transfer radical polymerization

Poly(N-isopropylacrylamide) (PIPAAm) brush grafted silica beads, a thermo-responsive chromatographic stationary phase, were prepared through a surface-initiated atom transfer radical polymerization (ATRP) using 2-propanol, N,N-dimethylformamide (DMF), and water as reaction solvents. The rate of grafting PIPAAm on silica bead surfaces was different and found to be dependent on the reactivity of reaction solvent. Temperature-dependent elution profiles of hydrophobic steroids from the prepared-beads-packed columns were found to be different, although the graft amounts of PIPAAm were similar on silica bead surfaces. Especially, prepared beads using 2-propanol exhibited a higher resolution than those using DMF. Calibration curves using glucose and pullulan suggested that beads prepared using DMF prohibited analytes to diffuse into the pores. On the contrary, beads prepared using 2-propanol allowed analytes to diffuse into the pores. The pore diameter of the prepared beads, measured by N(2) adsorption-desorption measurement, suggested that beads using 2-propanol has relatively larger pore diameter than those using DMF. Thus, the reaction solvent in surfaces-initiated ATRP affected the grafting configuration of PIPAAm on porous silica-bead surfaces, leading to the different separation efficiency of stationary phase for bioactive compounds.     

A novel double polymer modified hydrophobic/hydrophilic stationary phase for liquid chromatography

In this paper,norbornene imidazolium hexafluorophosphate(NM-MIm-PF6)was modified on the surface of aminopropyl silica by ring-opening metathesis polymerization(ROMP),and then oligo(ethylene glycol)methacrylate(OEGMA)were grafted on the surface by atom transfer radical polymerization(ATRP).Some characterizations in this article confirmed that the synthesis of P(NM-MIm-PF6)-SiPOEGMA(Pl-Si-P2)is successful.The P1-Si-P2 can separate sugars,amino acids,sulfonamides in a hydrophilic interaction mode and alkyl benzene,polycyclic aromatic hydrocarbon in a reverse phase mode.The experiment also found that the column has typical characte ristics of hydrophobic/hydrophilic separation mechanism.Compared to single hydrophobic C18 column and single hydrophilic Si-NH2 column,this P1-Si-P2 shows certain advantages.     

Aqueous chromatographic system for the quantification of propofol in biological fluids using a temperature-responsive polymer modified stationary phase

A new method for the quantitative analysis of monkey serum propofol, which is widely used as an anaesthetic agent, was developed by utilizing a temperature-responsive polymer of N-isopropylacrylamide (NIPAAm) and butyl methacrylate (BMA) as the stationary phase of HPLC–fluorescence detection. This poly(NIPAAm-co-BMA) copolymer undergoes a reversible phase transition from a hydrophilic to a hydrophobic microstructure when triggered by change in the temperature. Also this chromatographic system is possible to separate the analytes by using only water as a mobile phase. A pretreatment of the serum (80 μL) was only solid-phase extraction, and the recovery rate of propofol and internal standard was more than 77%, respectively. This method covered the calibration range from 0.5 μg/mL to 10 μg/mL and allowed a reproducible quantification of the serum propofol in administrated monkey serum. The intra- and inter-assay relative standard deviations were less than 14.1%. In addition, there was good relationship of the quantification values between the developed method and the widely used reversed-phase HPLC method. Our developed method has proven to be useful for a simple analysis of propofol in clinical practice, because the avoidance of complicated mobile phase preparation was possible, and only temperature changing could regulate the retention time of the analyte. In addition, by using water instead of fossil fuel, it is the ideal analytical method according to green chemistry.     

高分子手性固定相的研究进展

手性药物的应用对人类健康产生了深远影响。随着化学、材料、生命等学科的发展,人们对手性药物分离分析的研究日趋深入。色谱法在手性药物分离分析中得到了广泛应用,手性固定相的选择是实现手性色谱拆分的关键。以高分子材料作为手性固定相并对其进行衍生以优化手性分离性能是近些年的研究热点。本文介绍了近几年高分子手性固定相在手性分离中的研究进展,并对其发展前景进行了展望。     

Exploitation of a microporous organic polymer as a stationary phase for capillary gas chromatography

Microporous organic polymers (MOPs) have emerged as a new class of functional porous materials with unique characteristics and potential uses in diverse areas. However, the field of MOPs for gas chromatographic (GC) separations has not been well explored. Herein, a MOP namely KAPs-1 was dynamic coated onto a capillary column for the first time. The fabricated column exhibited a nonpolar nature and the column efficiency for n-dodecane was up to 7769 plates m⁻¹. The KAPs-1 coated column showed high GC separation performance for a series of volatile organic compounds (VOCs) including the challenging ethylbenzene and xylene isomers, which could not be resolved at baseline on the commercial 5% phenyl polysiloxane stationary phase. Moreover, the relative standard deviations for five replicate determinations of the studied analytes were 0.0–0.6%, 0.9–3.2%, 1.1–5.9%, 0.8–3.7% for retention time, peak area, peak height and peak width, respectively. To investigate the interaction between some analytes and the stationary phase, thermodynamic and kinetic parameters were also evaluated. The results of this study show it is very promising to utilize MOPs as stationary phases for capillary GC.     

Counter-ionic effect on the separation of water-soluble compounds applying a hydrophilic stationary phase bonded with a zwitter-ionic polymer

A novel hydrophilic stationary phase bonded with a zwitter-ionic polymer for HPLC was synthesized. The stationary phase, in combination with a mobile phase containing various salts, was evaluated for its ability to separate water-soluble compounds, such as nucleobases, nucleosides and glycosides. The retention of a large majority of the solutes, except for cytosine, was increased by adding anti-chaotropic ions to the mobile phase. These results suggested that the retention of solutes depended on the thickness of the hydration layer on the stationary phase. In the zwitter-ionic polymer adsorbent, the formation of the hydration layer and the ionicity of the zwitter-ionic group on the stationary phase will be controlled by the properties of the ions added to the mobile phase.     

HPLC separation of positional isomers on a dodecylamine-N, N-dimethylenephosphonic acid modified zirconia stationary phase

The chromatographic performance of a new zirconia stationary phase (DPZ) modified with dodecylamine-N,N-dimethylenephosphonic acid (DDPA) is studied by using positional isomers as probes. The DDPA modified zirconia via one phosphonic group has a polar inner-layer and a non-polar outer-layer on its surface. The alkyl chain of outer-layer provides the hydrophobic interaction, while the polar inner-layer that consists of an amine group and a free phosphonic group provided dipolar and ion-exchange/columbic repellent interaction sites. The effects of methanol content, ionic strength and pH of mobile phase on capacity factors of the solutes are studied in detail, and baseline separations of toluidine, nitroaniline, aminophenol, dihydroxybenzene, and nitrophenol isomers were achieved on the new zirconia stationary phase. In addition, retention mechanism of the isomers on the DDPA-modified zirconia stationary phase is also proposed.     

High-performance liquid chromatography of some basic drugs on a n-octadecylphosphonic acid modified magnesia-zirconia stationary phase

The high-performance liquid chromatographic behavior of some basic drugs was studied on a n-octadecylphosphonic acid modified magnesia-zirconia (C18PZM) stationary phase. The effect of mobile phase variables such as methanol content, ionic strength, and pH on their chromatographic behavior was investigated. The retention mechanism of basic drugs on the stationary phase was elucidated. The results indicate that both hydrophobic and cation-exchange interactions contribute to solute retention under most chromatographic conditions. The inherent Br?nsted-acid sites and also the adsorbed Lewis base anionic buffer constituents on accessible ZM surface Lewis acid sites play a role in the retention of ionized solutes by cation-exchange interaction. However, especially at high mobile phase pH, the retention of basic drugs depends mainly on hydrophobic interactions between solutes and support. Separations of the basic drugs on the C18PZM phase by a predominantly reversed-phase retention mode were very promising. The mixed-mode retention feature on this phase, as a result of the adsorbed Lewis base anionic buffer constituents acting as sites for cation-exchange, could also be very useful, e.g. for enhancing the chromatographic selectivity of such analytes. The C18PZM seems to be an excellent alternative to silica-based reversed-phase stationary phase for the separation of strongly basic solutes.     

两种气相色谱固定相的研究

使用硫杂冠醚、穴醚[2.2.2]作气相色谱固定相制备毛细管柱,考察两种固定相的使用比例、极性、热稳定性,并对甲苯-苯、乙苯-甲苯、甲基苯酚（o/p）、二氯苯（o/p,m）、硝基氯化苯（m,o）、苯-环己烷、庚醇-辛醇、苯胺-N,N二甲基苯胺等混合样品进行色谱分离.实验结果表明：两种固定相在OV-1701中的比例均为15%时有较好的分离效果,都属于中等极性的固定相.硫杂冠醚、穴醚[2.2.2]的平均极性分别为815、832,其中硫杂冠醚固定相的热稳定性较好,有较高的使用温度（185℃）,而穴醚[2.2.2]的最高使用温度为120℃,因此穴醚[2.2.2]的使用温度受到一定的限制.从它们较好的分离性能看,固定相硫杂冠醚、穴醚[2.2.2]均具有较好的应用前景.     

一种表面共聚氢氧根选择性阴离子色谱固定相

报道了一种基于聚(苯乙烯-二乙烯基苯)微球(PS-DVB)的表面共聚氢氧根选择性阴离子固定相。它以烯丙基缩水甘油醚(AGE)为功能单体、通过自由基引发直接与PS-DVB微球表面残留的悬挂双键共聚,再通过醇胺开环得到。考察了两种醇胺试剂对分离的影响;扫描电镜、红外光谱、元素分析表征结果表明:表面共聚反应成功在微球表面引入季胺基团,且对微球理化性质无显著影响;所得固定相表现氢氧根淋洗液的高选择性,对常规无机阴离子表现出良好的分离性能(分离度>1.5)和运行稳定性(保留时间的相对标准偏差<1.13%),其实用性通过分析茶叶样品中无机阴离子进行了展示。     

Group contribution method for the estimation of contact angle trends on modified polymer surfaces

Group contribution methods can be used as an aid in evaluating contact angle data on modified polymer surfaces. Good correlation was seen between experimental contact angle titration data on a hydrolyzed polyimide surface and equations involving water-octanol partition coefficients using parameters derived from group contribution methods. The methods used captured features of the experimental contact angle titration data observed during ionization of surface functional groups.     

Temperature-responsive stationary phase utilizing a polymer of proline derivative for hydrophobic interaction chromatography using an aqueous mobile phase

A new method of chromatography is proposed, utilizing a thermo-responsive polymer carrying an amino acid ester residue for the stationary phase of high-performance liquid chromatography (HPLC). We have been investigating the new concept of chromatography, a temperature-responsive chromatography, using temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-modified surface for HPLC with a constant aqueous media as the mobile phase. In this study, we designed and synthesized thermo-responsive poly(acryloyl-L-proline methyl ester) and its copolymer with N-isopropylacrylamide (NIPAAm). Homopolymers of acryloyl-L-proline methyl ester and copolymer were prepared by the reaction of radical telomerization. These polymers underwent a reversible phase transition from water-soluble forms into aggregates by changing the temperature, similar to PNIPAAm. The surface properties and functions of stationary phases modified with poly(acryloyl-L-proline methyl ester) were controlled by the external temperature. In the chromatographic system, we separated steroids and amino acids with a variety of hydrophobicities using a sole aqueous mobile phase. In contrast to a PNIPAAm-modified surface, a poly(acryloyl-L-proline methyl ester)-modified surface showed a greater affinity for hydrophobic amino acids.     

Study on the thermal stability of a chiral stationary phase coated on capillaries for GC

A chiral stationary phase prepared by bonding L -valine-t-butylamide to XE-60 has been coated on glass and metal capillaries. The performances of the chiral glass and metal columns were equivalent to those of commercial fused silica capillary columns. The thermal stability of the glass column was examined up to 280°C. It was found that no appreciable change in separation factor (α value) was observed up to 230°C. The α values gradually decreased between 240 and 260°C, and enantiomer separation was no longer achieved at 280°C. It was concluded that the allowable upper limit temperature of the chiral stationary phase is between 230 and 240°C in the isothermal mode, and ca 260°C in temperature-programmed mode.     

Correlation of surfactant/polymer phase behavior with adsorption on target surfaces

In this contribution, the phase behavior of a surfactant/polymer mixed system is related to the adsorption of a complex derived from the mixture onto a target surface. The phase map for the system sodium dodecyl sulfate (SDS, a model anionic surfactant)/pDMDAAC (poly(dimethyl diallyl ammonium chloride), a cationic polymer) shows behavior very typical of surfactant/oppositely charged polyelectrolyte mixtures. The predominant feature is a broad, two-phase region in the phase map which lies asymmetrically around the 1:1 stoichiometry of surfactant charge groups to polymer charge units. The overall controlling principle driving the phase separation is charge compensation. Excess of polymer yields an isotropic solution, as does a great excess of surfactant (termed resolubilization). The phase separating in the SDS/pDMDAAC system is characterized by a positive zeta-potential when the polymer is in excess and a negative zeta-potential when the surfactant is in excess. The surface charge properties of the precipitated phases are essentially identical to those of target particles (ground borosilicate glass) dispersed at the same approximate position in the phase map, suggesting that the surfactant/polymer complex at the precipitation boundary is the same as that adsorbing onto the pigment particle. This conclusion is confirmed by depletion studies which allow the polymer adsorption density to be determined. For polymer-rich systems, essentially all of the surfactant adsorbs along with the polymer via a high-affinity isotherm with a plateau coverage of about 0.8 mg polymer/m (2). Surfactant-rich systems adsorb with a similar affinity, despite the mismatch of the complex charge matching that of the particle surface. Once adsorbed, these complexes are not readily removed by rinsing, though complexes adsorbed from SDS-rich systems will lose excess surfactant upon extreme dilution. Over a wide range of surfactant-rich compositions, from 1:1 stoichiometry out toward the resolubilization zone, a chemical analysis reveals that the surfactant/polymer precipitate species consists of a 1:1 charge complex with the addition of about 0.25 mol of surfactant/mol of complex. Resolubilization of these sparingly soluble species is achieved simply by dilution to below their solubility limit.     

Sorption of organic molecules on surfaces of a microporous polymer adsorbent modified with different quantities of uracil

The sorption of organic molecules on the surfaces of a number of adsorbents based on a microporous copolymer of styrene and divinylbenzene modified with different quantities of uracil is studied by means of inverse gas chromatography at infinite dilution. Samples containing 10^–6, 10^–5, 10^–4, 10^–3, 10^–2, and 0.5 × 10^?1 weight parts of uracil (the рС of uracil ranges from 1.3 to 6) are studied. The contributions from different intermolecular interactions to the Helmholtz energy of sorption are calculated via the linear free energy relationship. It is found that as the concentration of uracil on the surface of the polymer adsorbent grows, the contributions from different intermolecular interactions and the conventional polarity of the surface have a bend at рС = 3, due probably to the formation of a supramolecular structure of uracil. Based on the obtained results, it is concluded that the formation of the supramolecular structure of uracil on the surface of the polymer adsorbent starts when рС < 3.     

On-chip solid phase extraction coupled with electrophoresis using modified magnetic microspheres as stationary phase

A poly(dimethylsiloxane)(PDMS)/glass hybrid microchip for on-line solid phase extraction (SPE) and electrophoresis separation has been developed and evaluated. The SPE microchannel was crossed to the electrophoresis microchannel. All the microfluidic channels were etched on the glass substrate. The magnetic microspheres were coated with hydroxyl-terminated poly-dimethylsiloxane (PDMS-OH) serving as extraction phase, which could be conveniently immobilized into the sample pretreatment channel by magnetic field. The PDMS-OH microspheres were mobilized into and out of the pretreatment channel by injection flow. The 0.1 μmol/L solution of fluorescence isothiocyanate (FITC)-labeled phenylalanine (Phe) was electrically injected into the SPE channel and extracted onto the PDMS-OH microspheres bed. The enriched FITC-labeled Phe was electrically eluted by 9 mmol/L sodium acetate containing 10% acetonitrile and electrically driven into the electrophoresis channel and then separated. The preconcentration factor could reach 87.5 after sufficient extraction. A linear preconcentration curve was obtained with the initial FITC-labeled Phe concentration ranging from 6 nmol/L to 300 nmol/L (R ²=0.9922) with 200 s loading time. The detection limit (S/N=3) for the FITC-labeled Phe was 3 nmol/L.