Analytical Characterization of Fatty Acids Composition of Bioactive Stem Oil of Maytenus royleanus by Gas Chromatography Mass Spectrometry

The significant inhibition and selectivity for human solid tumor cell by oily fraction of Maytenus royleanus, was subjected to GC‐MS analysis for determination of its chemical constituents. GC‐MS profile of methyl ester derivatives of fatty acids, showed that Palmitic acid (35.41%), Oleic acid (10.91%), Stearic acid (5.31%), Margaric acid (5.13%), Behenic acid (5.18%) and Hexanoic acid (4.97%) were the major components in the isolated oily fraction, while rest of the other fatty acids were present in minor concentration. The literature revealed that no such work has been done for the determination of fatty acids in M. royleanus stem oil.     

Gas chromatography/mass spectrometry of oils and oil binders in paintings

A GC/MS procedure has been developed, optimized, and applied to characterization of oil binders in paintings. The procedure involves hydrolysis of lipids to fatty acids (FAs) and derivatization of FAs to fatty acid methyl esters (FAMEs) by a solution of sodium methanolate in methanol at an elevated temperature. FAMEs are analyzed by temperature-programed GC followed by full-scan MS. Old and dried samples are subjected to extraction of nonpolymerized FAMEs into dichloromethane prior to hydrolysis. The method provides a good repeatability of results and has been applied to the characterization of common plant oils used in paintings, to commercial oil and tempera paints, to model painting samples, and to samples taken from real paintings. The fresh oils and binders can readily be identified and characterized. The ratio of the methyl esters of palmitic and stearic acids can be used to characterize oil binders in old works of art.     

Capillary gas chromatography combined with high performance liquid chromatography for the structural analysis of olive oil triacylglycerols

The triacylglycerol composition of olive oil samples has been determined by stereospecific analysis after partial hydrolysis with ethyl magnesium bromide, derivatization, preparative chiral HPLC, transesterification, and GC quantitation of fatty acid methyl esters. The data obtained for position sn-2 were compared with those from capillary GC analysis of monoacyl sn-2-glycerols after enzymatic lipolysis of triacylglycerols. The determination of triacylglycerols collected by silver ion HPLC and quantified (as fatty acid methyl esters) by GC, together with direct GC analysis on a polar column, have then furnished a comprehensive picture of the triacylglycerol content of olive oil.     

气相色谱质谱法测定植物油中脂肪酸

建立了气相色谱质谱法测定食用植物性油中脂肪酸检测的方法。植物油中的脂肪酸甘油酯在碱性条件下被水解为游离脂肪酸,随后采用三氟化硼将其转化为脂肪酸甲酯。采用同位素标记脂肪酸进行加标回收试验,回收率在94%以上。通过质谱的选择离子检测模式对硬脂酸、油酸、亚油酸等10种目标脂肪酸进行了检测,结果显示,该方法可用于油品的质量检测和日常分析。     

Analysis of odorous trichlorobromophenols in water by in-sample derivatization/solid-phase microextraction GC/MS

The simultaneous determination of several odorous trichlorobromophenols in water has been carried out by an in-sample derivatization headspace solid-phase microextraction method (HS-SPME).The analytical procedure involved their derivatization to methyl ethers with dimethyl sulfate/NaOH and further HS-SPME and gas chromatography-mass spectrometry (GC/MS) determination. Parameters affecting both the derivatization efficiency and headspace SPME procedures, such as the selection of the SPME fiber coating, derivatization–extraction time and temperature, were studied. The commercially available polydimethylsiloxane (PDMS) 100 μm and Carboxen-polydimethylsiloxane-divinylbenzene (CAR-PDMS-DVB) fibers appeared to be the most suitable for the simultaneous determination of these compounds. The precision of the HS-SPME/GC/MS method gave good relative standard deviations (RSDs) run-to-run between 9% and 19% for most of them, except for 2,5-diCl-6-Br-phenol, 2,6-diCl-3-Br-phenol and-2,3,6-triBr-phenol (22%, 25% and 23%, respectively). The method was linear over two orders of magnitude, and detection limits were compound dependent but ranged from 0.22 ng/l to 0.95 ng/l. The results obtained for water samples using the proposed SPME procedure were compared with those found with the EPA 625 method, and good agreement was achieved. Therefore, the in-sample derivatization HS-SPME/GC/MS procedure here proposed is a suitable method for the simultaneous determination of odorous trichlorobromophenols in water.     

A detailed analysis of volatile constituents of <Emphasis Type="Italic">Aquilegia pancicii</Emphasis> Degen,a Serbian steno-endemic species

Chemical composition of the essential oil of Aquilegia pancicii Degen endemic to Serbia is reported. Essential oil obtained by hydrodistillation from the aerial parts was analyzed by GC and GC/MS. The major constituents were hexadecanoic acid (24.3 %) and hexahydrofarnesyl acetone (14.1 %), among 130 identified compounds, representing 90.3 % of the total essential oil. The oil was marked by the presence of 69 fatty acid derivatives and low content of terpenoids representing 60.4 % and 7.8 % of the oil, respectively.     

Solid-phase microextraction and on-line methylation gas chromatography for aliphatic carboxylic acids

Methylation of carboxylic acids upon syringe injection of a mixture of the acid sample and phenyltrimethylammonium hydroxide (PTMAH) into the GC injection port is a convenient but under-utilized derivatization procedure. To minimize potential instrumental problems due to the sample matrix, it was shown that solid-phase microextraction (SPME) is effective for the absorption of both the carboxylic acid (RCOOH) and PTMAH permitting on-line methylation from the fiber. A comparison of three fibers, polydimethylsiloxane (PDMS), polyacrylate (PA), and carboxene/PDMS for decanoic and stearic acids showed the carboxene/PDMS fiber was about five times more effective for the extraction of the RCOOH-PTMAH mixture dissolved in methanol. The optimum fiber absorption time was about 20 min and the optimum desorption time in the injection port held at 280 degrees C was about 5-10 min. The optimum PTMAH/RCOOH ratio was about 125:1. Linearity for C18:0 at 3.3 x 10(-6)-3.3 x 10(-4) M was demonstrated by GC-MS with a detection limit of 1 microM. This SPME method is also effective for the methylation of C18:1, C18:2, and C18:3 fatty acids. Transesterification of olive oil using PTMAH and then on-line methylation either by the syringe method or by SPME gave comparable fatty acid methyl ester profiles.     

Gas chromatography/trace analysis of derivatized azelaic acid as a stability marker

Azelaic acid, a naturally occurring saturated dicarboxylic acid, is found in many topical formulations for its various medical benefits or as a byproduct of the oxidative decomposition of unsaturated fatty acids. The poor volatility of azelaic acid hinders its applicability in GC analysis. Therefore, azelaic acid was derivatized by methylation and silylation procedures to enhance its volatility for GC analysis. Accordingly, dimethyl azelate (DMA) and di(trimethylsilyl) azelate were synthesized and characterized by GC–MS. Subsequently, a GC with flame ionization detection method was developed and validated to analyze trace amounts of azelaic acid in some marketed skin creams. Unlike DMA, di(trimethylsilyl) azelate was chemically unstable and degraded within few hours. Nonane was used as a stable internal standard. Variability due to derivatization and extraction was controlled by a standard addition procedure. DMA analysis was linear in a wide concentration range (100 ng/mL to 100 mg/mL). Moreover, the method was accurate (96.4–103.4%) and precise with inter‐ and intraday variability <2.0% and LOQ and LOD of 100 and 10 ng/mL, respectively.     

深海鱼油中脂肪酸的分析

用氢氧化四甲胺／甲醇酯化法使深海鱼油内的三酸甘油酯中的脂肪酸和游离脂肪酸转化成脂肪酸甲酯,用气相色谱和气相色谱／质谱进行分析,鉴定出４１个组分,并对其中的主要组分顺式－５,８,１１,１４,１７－十二碳五稀酸（ＥＰＡ）和顺式－４,７,１０,１３,１６,１９－二十二碳六烯酸（ＤＨＡ）建立了定量分析方法。方法的相对标准偏差分别为４．３％（ＥＰＡ）和４．７％（ＤＨＡ）。ＥＰＡ和ＤＨＡ的回收率分别为１００．     

Pentafluorobenzylation of the fungicide metabolite fenpropimorphic acid for GC/MS investigations of soil samples

For the determination of fenpropimorphic acid in soil samples, a derivatization step with pentafluorobenzylbromide has been established in order to perform GC/MS with negative chemical ionization. In spite of forming the electrophilic pentafluorobenzyl ester, only the fenpropimophic acid anion was detected. Additional derivatization reactions with diazomethane and 2,2,2-trichloroethanol showed that the formation of this acid anion was depending on the leaving group. In comparison with the determination of the methyl ester with GC/MS and electron impact ionization, the detection limit was however improved from 10 microg/kg to 2 microg/kg dry soil and the analytical quality was ensured due to higher stability of the pentafluorobenzyl ester standards.     

微波辅助衍生化GC-MS法测定食用油中的脂肪酸

利用微波技术,研究了用ＫＯＨ－甲醇,Ｈ２ＳＯ４－甲醇－甲苯、ＨＣｌ－甲醇等不同体系对食用油中的脂肪酸进行了衍生化,系统地比较了它们的优劣势,以及适合的分析对象,在１ｍｉｎ内完成衍生物生化反应,选用正庚烷代替传统方法的苯＋石油醚作为脂肪酸甲酯蝗提取剂,与传统消解及衍生化方法相比,具有节省溶剂,省时,易于操作等特点。     

Candida antarctica B Lipase-Loaded Microreactor for the Automated Derivatization of Lipids

A key bottleneck in the profiling of lipids is the multistep derivatization required prior to gas chromatography (GC) analysis. A single in-vial lipid derivatization and analysis may significantly minimize sample loss and improve analytical sensitivity. A cotton fiber-supported poly(glycidylmethacrylate-co-ethylene glycol dimethacrylate) polymer microbrush microreactor loaded with Candida antarctica lipase B was developed for the facile conversion of triacylglycerols into fatty acid ethyl ester derivatives for gas chromatograph–mass spectrometry (GC–MS) analysis. The polymer microbrush microreactor was fabricated in effort to provide efficient, simplified, cost effective, and high-throughput GC–MS determination of triacylglycerols. The polymer microbrush microreactor was used as an in-vial triacylglycerol transesterification platform, with economical sample consumption of less than or equal to 100?µL and significant reduction of reagents. To evaluate the polymer microbrush microreactor performance for lipids, a triolein standard and camelina oil triacylglycerols were quantitatively transformed into ethyl oleate and fatty acid ethyl esters, respectively, following a 3?h reaction time. The lipase-loaded cotton fiber-supported poly(glycidylmethacrylate-co-ethylene glycol dimethacrylate) polymer microbrush microreactors were reusable for up to five times for quantitative transesterification with minimal loss of lipase activity.     

Determination of the fatty acid composition of saponified vegetable oils using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A method using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) for the determination of the fatty acid composition of vegetable oils is described and illustrated with the analysis of palm kernel oil, palm oil, olive oil, canola oil, soybean oil, vernonia oil, and castor oil. Solutions of the saponified oils, mixed with the matrix, meso-tetrakis(pentafluorophenyl)porphyrin, provided reproducible MALDI-TOF spectra in which the ions were dominated by sodiated sodium carboxylates [RCOONa + Na]+. Thus, palm kernel oil was found to contain capric acid, lauric acid, myristic acid, palmitic acid, oleic acid, and stearic acid. Palm oil had a fatty acid profile including palmitic, linoleic, oleic, and stearic. The relative percentages of the fatty acids in olive oil were palmitoleic (1.2 +/- 0.5), palmitic (10.9 +/- 0.8), linoleic (0.6 +/- 0.1), linoleic (16.5 +/- 0.8), and oleic (70.5 +/- 1.2). For soybean oil, the relative percentages were: palmitoleic (0.4 +/- 0.4), palmitic (6.0 +/- 1.3), linolenic (14.5 +/- 1.8), linoleic (50.1 +/- 4.0), oleic (26.1 +/- 1.2), and stearic (2.2 +/- 0.7). This method was also applied to the analysis of two commercial soap formulations. The first soap gave a fatty acid profile that included: lauric (19.4% +/- 0.8), myristic (9.6% +/- 0.5), palmitoleic (1.9% +/- 0.3), palmitic (16.3% +/- 0.9), linoleic (5.6% +/- 0.4), oleic (37.1% +/- 0.8), and stearic (10.1% +/- 0.7) and that of the second soap was: lauric (9.3% +/- 0.3), myristic (3.8% +/- 0.5), palmitoleic (3.1% +/- 0.8), palmitic (19.4% +/- 0.8), linoleic (4.9% +/- 0.7), oleic (49.5% +/- 1.1), and stearic (10.0% +/- 0.9). The MALDI-TOFMS method described in this communication is simpler and less time-consuming than the established transesterification method that is coupled with analysis by gas chromatography/mass spectrometry (GC/MS). The new method could be used routinely to determine the qualitative fatty acid composition of vegetable oils, and, when fully validated by comparison with standard analytical methodologies, should provide a relatively fast quantitative measurement of fatty acid mixtures and/or soap formulations that contain saturated and unsaturated hydrocarbon moieties.     

Comparative quantitative fatty acid analysis of triacylglycerols using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and gas chromatography.

Quantitative analyses of fatty acids from five triacylglycerol products, coconut oil, palm kernel oil, palm oil, lard and cocoa butter, were carried out using two analytical methods: matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) and gas chromatography (GC), in an effort to validate the application of MALDI-TOFMS in quantitative fatty acid analysis. For the GC analysis, transmethylated products were used, whereas, for the MALDI-TOF analysis, saponified products were used. Under MALDI-TOF conditions, the acids were detected as sodiated sodium carboxylates [RCOONa + Na](+) consistent with the mode of ionization that was previously reported. Thus, the MALDI-TOF mass spectrum of saponified coconut oil showed the presence of sodiated sodium salts of caprylic acid (7.5 +/- 0.67, m/z 189), capric acid (6.9 +/- 0.83, m/z 217), lauric acid (47.8 +/- 0.67, m/z 245), myristic acid (20.4 +/- 0.51, m/z 273), palmitic acid (9.8 +/- 0.47, m/z 301), linoleic acid (0.9 +/- 0.07, m/z 325), oleic acid (4.8 +/- 0.42, m/z 327) and stearic acid (2.0 +/- 0.13, m/z 329). Saponified palm kernel oil had a fatty acid profile that included caprylic acid (3.5 +/- 0.59), capric acid (4.7 +/- 0.82), lauric acid (58.6 +/- 2.3), myristic acid (20.9 +/- 1.5), palmitic acid (7.2 +/- 1.1), oleic acid (3.8 +/- 0.62) and stearic acid (1.2 +/- 0.15). Saponified palm oil gave myristic acid (0.83 +/- 0.18), palmitic acid (55.8 +/- 1.7), linoleic acid (4.2 +/- 0.51), oleic acid (34.5 +/- 1.5), stearic acid (3.8 +/- 0.26) and arachidic acid (0.80 +/- 0.22). Saponified lard showed the presence of myristic acid (1.5 +/- 0.24), palmitic acid (28.9 +/- 1.3), linoleic acid (13.7 +/- 0.67), oleic acid (38.7 +/- 1.4), stearic acid (12.8 +/- 0.64) and arachidic acid (2.4 +/- 0.35). Finally, for saponified cocoa butter, the fatty acid distribution was: palmitic acid (32.3 +/- 1.0), linoleic acid (2.6 +/- 0.35), oleic acid (34.9 +/- 1.7) and stearic acid (30.3 +/- 1.6). Quantitative gas chromatographic analysis of the corresponding methyl esters from these triacylglycerol products yielded data that were mostly in agreement with the MALDI-TOFMS data. The MALDI-TOF experiment, however, proved to be superior to the GC experiment, particularly with regard to baseline resolution of unsaturated acids. Furthermore, the ability of MALDI-TOFMS to detect low concentrations of fatty acids rendered it more sensitive than the GC methodology.     

A rapid and sensitive analysis of diphenylarsinic acid in water by gas chromatography/mass spectrometry.

A rapid and sensitive analytical method using pentafluorothiophenol (PFTP) derivatization was applied to detect diphenylarsinic acid (DPAA) in water. In this study, the optimum derivatization conditions, such as acid concentration, reaction time and reaction temperature, were investigated to develop a suitable procedure for DPAA determination. After extracting the derivatives into benzene, the determination was carried out by gas chromatography/mass spectrometry (GC/MS) with selected ion monitoring (SIM). The detection limit of the method was 9.4 microg/l, and the overall recoveries obtained from real environmental samples were 88.9 - 104.7% and coefficient variations were 5.1 - 13.9%.     

Determination of methylmalonic acid and glutaric acid in urine by aqueous-phase derivatization followed by headspace solid-phase microextraction and gas chromatography-mass spectrometry

In this work, a novel technique of aqueous-phase derivatization followed by headspace solid-phase microextraction and gas chromatography-mass spectrometry was developed for the determination of organic acids in urine. The analytical procedure involves derivatization of organic acids to their ethyl esters with diethyl sulfate, headspace sampling, and GC/MS analysis. The proposed method was applied to the determination of methylmalonic acid and glutaric acid in urine. The experimental parameters and method validation were studied. Optimal conditions were obtained: PDMS fiber, extraction temperature 55 degrees C, extraction time 30 min, and 60 microL of diethyl sulfate as derivatization reagent with 2 mg of the ion pairing agent tetrabutylammonium hydrogensulfate. The method was linear over three orders of magnitude, and detection limits were 21 nM for methylmalonic acid and 34 nM for glutaric acid, respectively. Consequently, in-situ derivatization/HS-SPME/GC/MS is an alternative and powerful method for determination of organic acids as biomarkers in biological fluids.     

Determination of lipids in infant formula powder by direct extraction methylation of lipids and fatty acid methyl esters (FAME) analysis by gas chromatography.

Fatty acid methyl esters (FAMEs) of pure triglyceride standards, oils, and fat from dry matrixes were formed by transesterification using sodium methoxide in methanol-hexane. FAMEs were produced by direct addition of sodium methoxide-hexane to samples and heating to simultaneously extract and transesterify acyl lipids. FAMEs were quantitated by capillary gas chromatography (GC) over a fatty acid concentration range of 0 to 1.7 mg/mL (r > or = 0.9997). Total fat was calculated as the sum of individual fatty acids expressed as triglyceride equivalents, in accordance with nutrition labeling guidelines. Saturated, polyunsaturated, and monounsaturated fats were calculated as sums of individual free fatty acids. Absolute recoveries determined from individual fatty acids in test samples ranged from 69.7 to 106%. Recoveries (relative to the C13:0 internal standard) for individual fatty acids in test samples ranged from 95 to 106%. Reproducibility was constant at each fatty acid level in the reaction mixture (n = 5, coefficient of variation [CV] < 2%). Absolute recovery determined from the sum of total fatty acids in standard reference material (SRM) 1846 (powdered infant formula) was 96.4%. Analysis of SRM 1846 gave results that agreed closely with the certified fat and fatty acid values. Analysis of commercial infant formula gave results that were comparable to those obtained with AOAC Method 996.01. The direct extraction methylation procedure is rapid, and the transesterification of acyl lipids to form FAMEs is complete within 15 min. Classical saponification and refluxing are not required. This method provides FAMEs free of interferences and easily quantitated by GC or confirmed by GC/mass spectrometry (MS). Unambiguous MS identification of individual FAMEs derived from pure standards, SRM 1846, and powdered infant formula product was obtained.     

Characterization of medieval proteinaceous painting media using gas chromatography and gas chromatography — mass spectrometry

Proteinaceous organic materials used as ancient painting media were investigated by capillary gas chromatography (GC) and capillary gas chromatography — mass spectrometry (GC/MS). Medieval wall paintings made by the tempera technique were considered and their binding media were studied by the characterization of their main chemical components. The basic methodology is based on the determination of amino acids in samples of paint layers after hydrolysis and derivatization and on the comparison with reference proteinaceous materials. Multivariate chemometric techniques were used to facilitate the recognition of the protein source from chromatographic data. To characterize the binders further, a method was developed for the determination of fatty acids, present as minor components, by GC/MS. The use of fused-silica capillary columns coated with selected stationary phases allowed the separation of amino acid and fatty acid derivatives in a single analytical run.     

Forensic identification of spilled biodiesel and its blends with petroleum oil based on fingerprinting information

A case study is presented for the forensic identification of several spilled biodiesels and its blends with petroleum oil using integrated forensic oil fingerprinting techniques. The integrated fingerprinting techniques combined SPE with GC/MS for obtaining individual petroleum hydrocarbons (aliphatic hydrocarbons, polyaromatic hydrocarbons and their alkylated derivatives and biomarkers), and biodiesel hydrocarbons (fatty acid methyl esters, free fatty acids, glycerol, monoacylglycerides, and free sterols). HPLC equipped with evaporative scattering laser detector was also used for identifying the compounds that conventional GC/MS could not finish. The three environmental samples (E1, E2, and E3) and one suspected source sample (S2) were dominant with vegetable oil with high acid values and low concentration of fatty acid methyl ester. The suspected source sample S2 was responsible for the three spilled samples although E1 was slightly contaminated by petroleum oil with light hydrocarbons. The suspected source sample S1 exhibited with the high content of glycerol, low content of glycerides, and high polarity, indicating its difference from the other samples. These samples may be the separated byproducts in producing biodiesel. Canola oil source is the most possible feedstock for the three environmental samples and the suspected source sample S2.     

Chromatographic approaches for determination of low-molecular mass aldehydes in bio-oil

HPLC–UV and GC/MS determination of aldehydes in bio-oil were evaluated. HPLC–UV preceded by derivatization with 2,4-dinitrophenylhydrazine allows separation and detection of bio-oil aldehydes, but the derivatization affected the bio-oil stability reducing their quantitative applicability. GC/MS determination of aldehydes was reached by derivatization with o-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine hydrochloride. Two approaches for this reaction were evaluated. The first: “in solution derivatization and head space extraction” and the second: “on fiber derivatization SPME”, the latter through an automatic procedure. Both sample treatments allows the quantification of most important aliphatic aldehydes in bio-oil, being the SPME approach more efficient. The aldehyde concentrations in bio-oil were ～2% formaldehyde, ～0.1% acetaldehyde and ～0.05% propionaldehyde.