Preparation and properties of physically and chemically cross-linked hybrid hydrophobic association hydrogels with good mechanical strength

To correct the defects of hydrophobic association hydrogels(HA-gels), new physically and chemically cross-linked hybrid hydrophobic association hydrogels(hybrid HA-gels) were prepared by radical copolymerization of acrylamide(AM), octylphenol polyoxyethylene(n) acrylate(OPn AC, n stands for the number of ethoxy group, and is 10 and 21) and N,N′-methylenebisacrylamide(MBA). On the basis of the statistical molecular theory of rubber elastic, the Mooney-Rivlin model and using the tensile true stress(σ_true) tested at room temperature, the number of network strands per unit volume(υ_0) and the number-average molar mass of a network strand(M_c) were evaluated for hybrid HA-gels. For the hydrogels, the effect of the content of MBA and OP10 AC on their tensile mechanical properties was studied by using υ_0 and M_c; also, the effect of the compositions and temperature on their swelling behavior in distilled water was discussed in detail. In addition, hybrid HA-gels including a small quantity of MBA possessed the capabilities of secondary self-healing and remolding. In contrast with HA-gels prepared by the same compositions besides MBA, hybrid HA-gels showed good mechanical strength and long-term thermal stability in distilled water in the range of 25 to 80 °C. Furthermore, hybrid HA-gels also avoided the self-deswelling behavior of HA-gels. The results show that the application fields of HA-gels will be greatly broadened after introducing a chemical cross-linking network.     

Effect of different electrolytes on the swelling properties of calyx[4]pyrrole-containing polyacrylamide membranes

Calix[4]pyrrole (1) was synthesized and characterized and this macrocycle was incorporated in polyacrylamide gels. The presence of meso-octamethyl-porphyrinogen inside of gel was checked using infrared spectroscopy, differential scanning calorimetry, and swelling studies. The swelling degree of these hydrogels in equilibrium with different electrolytes (NaCl, LiCl, KCl, CaCl₂ and AlCl₃) was measured in a concentration range 0.1-0.5 mol dm⁻³. Although no significant alterations in the swelling degree can be found for the different 1:1 electrolytes, when the cation charge of unsymmetrical electrolytes increases, the gel swells in a significant way. This swelling process is enhanced by the presence of calyx[4]pyrrole. The effect of alkaline hydrolysis of polaycrylamide-based hydrogels was also studied. The hydrolysed hydrogels collapse in the presence of the electrolytes; this behavior is dependent on the hydrolysis degree, electrolyte charge and calyx[4]pyrrole presence and concentration; the latter leads to polyacrylamide with tailor-made properties.     

Modified carrageenan. 5. Preparation,swelling behavior,salt‐ and pH‐sensitivity of partially hydrolyzed crosslinked carrageenan‐graft‐polymethacrylamide superabsorbent hydrogel

The polysaccharide, kappa‐carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′‐methylene bisacrylamide (MBA) were used as a free‐radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC‐g‐PMAM or hydrolyzed κC‐g‐PMAM (PMAM: polymethacrylamide) was characterized by FT‐IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling capacity of these hydrogels was also measured in various salt solutions. Results indicated that the swelling ratios decreased with an increase in the ionic strength of the salt solutions. This behavior can be attributed to charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. Absorbency of superabsorbing hydrogels was examined in buffer solutions with pH range 1–13. Also, the pH reversibility and on–off switching behavior, at pH values 3.0 and 8.0, makes the synthesized hydrogels good candidates for controlled delivery of bioactive agents. Finally, swelling kinetics in distilled water and various salt solutions was preliminary investigated. Results showed that the swelling in water was faster than in saline solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Swelling behavior of ionically cross-linked polyampholytic hydrogels in varied salt solutions

Ionically cross-linked polyampholytic hydrogels were synthesized by redox copolymerization of acrylamide and an ionic complex of (N,N-diethylamino)ethyl methacrylate and acrylic acid (designated as PADA hydrogel). The swelling behavior of the hydrogels in water indicated that a minimal equilibrium swelling ratio is found when the molar ratio of anionic/cationic monomers was 1.55. In NaCl solution, the hydrogels exhibited the typical swelling behavior of conventional polyampholytic gels. Their equilibrium swelling ratios increased with an increase in the NaCl concentration. In solutions of multivalent ions (CaCl₂ and trisodium citrate solutions), the equilibrium swelling ratios of the hydrogels increased first and were then followed by a decrease with an increase in salt concentration. Interestingly, an unexpected abrupt swelling phenomenon was observed when the fully swollen hydrogels in salt solution were transmitted to pure water. The unique swelling behavior of PADA hydrogels depends not only on the molar ratio of the anionic/cationic monomers but also on the valency of the ions.     

Adsorption of Uranyl Ions into Poly(Acrylamide‐co‐Acrylic Acid) Hydrogels Prepared by Gamma Irradiation

Acrylamide (AAm)/Acrylic Acid (AAc) copolymers have been prepared by gamma irradiation of binary mixtures at three different compositions where the acrylamide/acrylic acid mole ratios varied around 15, 20, and 30%. Threshold dose for 100% conversion of monomers into hydrogels was found to be 8.0 kGy. Poly(Acrylamide‐co‐Acrylic Acid) (poly(AAm‐co‐AAc)) hydrogels have been considered for the removal of uranyl ions from aqueous solutions. Swelling behavior of these hydrogels was determined in distilled water at different pH values and in aqueous solutions of uranyl ions. The results of swelling tests at pH 8.0 indicated that poly(AAm‐co‐AAc) hydrogel, containing 15% acrylamide showed maximum % swelling. Diffusion of water and aqueous solutions of uranyl ion into hydrogels was found to be non‐Fickian in character and their diffusion coefficients were calculated. The effect of pH, composition of hydrogel, and concentration of uranyl ions on the adsorption process were studied at room temperature. It was found that one gram of dry poly(AAm‐co‐AAc) hydrogel adsorbed 70–320 mg and 70–400 mg uranyl ions from aqueous solutions of uranyl nitrate and uranyl acetate in the initial concentration range of 50–1500 mg UO₂ ²⁺L^?, depending on the amount of AAc in the hydrogels, respectively. Adsorption isotherms were constructed for poly(AAm‐co‐AAc)–uranyl ion system indicating an S type of adsorption in the Giles classification system. It is concluded that crosslinked poly(AAm‐co‐AAc) hydrogels can be successfully used for the removal of uranyl ions from their aqueous solutions.     

An enhanced immobilization of BSA biomolecule on anionic hydrogels: swelling and adsorption modeling

The three-dimensional structure of hydrogels plays a leading role in several areas of applications. The hydrogels are more and more used as systems of immobilized and controlled release of biomolecules in biotechnology and bio-pharmacy industries. To improve protein adsorption capacity in poly(acrylamide) hydrogels, maleic acid co-monomer was included into the reaction mixture during hydrogel synthesis. So, hydrogels of poly(acrylamide) and its copolymers with diprotic maleic acid were prepared by copolymerization and chemical crosslinking with N,N′-methylene bis-acrylamide. Swelling behavior in distilled water, in physiological saline and in bovine serum albumin (BSA) solutions was studied. Influence of initial BSA concentration on hydrogel swelling and BSA adsorption was investigated. The high amount of maleic acid present in the hydrogels has a significant effect on the swelling behavior and BSA adsorption. Results showed that the pH sensitivity of hydrogels resulted in the high amount of adsorbed BSA. The adsorption isotherms were described by Langmuir and Freundlich models. The thermodynamic parameter (ΔG _ads ⁰ ) was determined for all obtained hydrogels. We demonstrated the favorable character and reversibility of the BSA adsorption process.     

Tensile Mechanical Properties of Hydrophobic Association Hydrogels: Effect of Crosslinking Method,Synthesis Temperature,Mineral Salt and Swelling

Hydrophobic association hydrogels (HA-gels) were prepared through micellar copolymerization of acrylamide (AM) and a small amount of octylphenol polyoxyethylene acrylate (OP-10-AC) in an aqueous solution containing sodium dodecyl sulfate (SDS). For the P(AM/OP-10-AC) HA-gels, the effect of crosslinking method, synthesis temperature, mineral salt (NaCl) and swelling on their tensile mechanical properties was investigated in detail. The experimental results show that crosslinking method, synthesis temperature, NaCl and swelling powerfully influenced tensile mechanical properties of the P(AM/OP-10-AC) HA-gels. In addition, according to the tensile experimental results of the P(AM/OP-10-AC) HA-gels swollen, an effective crosslinking density change model is proposed. The effect of swelling on tensile mechanical properties of the P(AM/OP-10-AC) HA-gels was discussed on the basis of the model.     

Synthesis and characterization of antibacterial semi-interpenetrating carboxymethyl chitosan/poly (acrylonitrile) hydrogels

Blend hydrogels composed of carboxymethyl chitosan (CMCh) and poly (acrylonitrile) (PAN) were synthesized via crosslinking method. Several analyses were made to investigate both physical and thermal properties of CMCh/PAN hydrogels like; FTIR, scanning electron microscope, XRD and thermogravimetric analysis (TGA). TGA results showed that CMCh/PAN hydrogels are thermally more stable than CMCh and their thermal stability increases as PAN content increases in the hydrogel. Moreover, the swelling behavior of CMCh/PAN hydrogels was studied in different buffer solutions. It was found that CMCh/PAN hydrogels swell much more than PAN especially at pH 9. The hydrogels sorption for different dyestuff and various metal ions like; Cu²⁺, Cd²⁺ and Co²⁺ were also studied. In this work, antibacterial characteristic of hydrogels was mainly investigated towards Escherichia coli (E. coli) as a serious disease-leading bacterium. All tested hydrogels have clearly presented good antibacterial activity as CMCh content increases in the hydrogels.     

新型半纤维素基磁性水凝胶的制备及性能

采用H₂O₂-Vc氧化还原体系引发半纤维素衍生物,以表面修饰的Fe₃O₄粒子作为磁性组分,利用接枝共聚方法制备了新型半纤维素基磁性水凝胶. 分别用傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)和扫描电子显微镜(SEM)对水凝胶的结构及形貌进行了表征,利用X射线衍射(XRD)和振动样品磁强计(VSM)对水凝胶的晶型结构及磁性能进行了分析,发现Fe₃O₄粒子均匀分散在凝胶网络中,半纤维素基磁性水凝胶表现出良好的顺磁性. 考察了丙烯酸/半纤维素比例、Fe₃O₄粒子含量及交联剂用量对水凝胶溶胀性能的影响,并探讨了该水凝胶的溶胀机理,它在pH 8 缓冲溶液中的溶胀较好符合Fickian 和Schott 动力学模型. 通过SEM和溶胀性能分析表明,随着pH值的升高水凝胶的孔径增大,水凝胶的溶胀率逐渐增大. 制备的水凝胶被用于溶菌酶吸附研究,结果表明磁性凝胶的吸附量大于非磁性水凝胶,水凝胶的吸附行为符合Freundlich 和Temkin 等温模型.     

The controlled release behavior and pH‐ and thermo‐sensitivity of alginate/poly(vinyl alcohol) blended hydrogels

Poly(vinyl alcohol) (PVA) was blended with sodium alginate (Alg) in various ratios and crosslinked with calcium chloride and made into hydrogel membranes. The dependence of the swelling behavior of these Alg‐Ca/PVA hydrogels on pH was investigated. The temperature‐dependent swelling behavior of the semi‐interpenetrating network (semi‐IPN) hydrogels was examined at temperatures from 2 to 45°C and the enthalpy of mixing (ΔH_mix) was determined at various temperatures. The molecular structure of the hydrogels was studied by infrared spectroscopy and their water structure in the semi‐IPN hydrogels was measured by differential scanning calorimetry (DSC). The influence of Ca²⁺ content on the network structure of Alg‐Ca/PVA hydrogels was investigated in terms of the compressive elastic modulus, effective crosslinking density, and the polymer–solvent interaction parameter based on the Flory theory. The loading of alizarin red S (ARS) followed the Langmuir isotherm mechanism and the release kinetics of ARS from the Alg‐Ca/PVA hydrogels followed the Fickian diffusion mechanism. Copyright © 2008 John Wiley & Sons, Ltd.     

Swelling behavior of amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether,and their interaction with cationic surfactant

Amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether were synthesized by -radiation-induced free radical polymerization. Hydrogels with certain copolymer compositions showed thermo-sensitive behavior in aqueous solutions. The swelling behavior of the hydrogels in cetylpyridinium bromide aqueous solution was studied. Increased swelling of the hydrogels was observed in the surfactant solutions. The increased swelling was more prominent for the hydrogels with a higher content of hydrophobic moiety in the copolymer composition, and with higher surfactant concentration. The reason for this phenomenon is discussed. Treatment of some hydrogels in the surfactant solutions resulted in higher swelling ability in distilled water with distinct thermo-induced contraction over a narrow temperature interval.     

STUDY ON ACRYLAMIDE-SODIUM ACRYLATE COPOLYMER GELS

Acrylamide-sodium acrylate copolymer hydrogels have been obtained by radiation techniques. Two different methods have been used to introduce—COONa groups into polymer chains of the gels: (1) by partial hydrolysis of acrylamide homopolymer gel; (2) by direct copolymerization and crosslinking of acrylamide and sodium acrylate in aqueous solutions. It was found that the gels obtained in different ways had different properties, the swelling character of the gels obtained by partial hydrolysis were more sensitive to pH of swelling aqueous media, in order to explain these differences, ~(13)C-NMR techniques were used to investigate the sequence distribution of monomer units of both gels.     

RADIATION INDUCED ACRYLAMIDE/CITRIC ACID HYDROGELS AND THEIR SWELLING BEHAVIORS

Citric acid (CAc) moieties containing acrylamide (AAm) hydrogels were prepared by gamma irradiation of their aqueous solutions. A possible polymerization and crosslinking mechanism for acrylamide/citric acid (AAm/CAc) hydrogels is proposed. The effects of irradiation dose and citric acid content on swelling behavior were investigated. Swelling took place in water at 25°C and was followed gravimetrically. Incorporation of a relatively low amount of citric acid to acrylamide hydrogel increased its swelling up to 950% from 700%. The diffusion of water into AAm/CAc hydrogels was found to be a non-Fickian type. Diffusion coefficients of AAm/CAc hydrogels found as 5 × 10^?7? 10 × 10^?7 cm² sec^?1. It has also been found that the number average molar mass between crosslinks is increased with the CAc content and decreased with irradiation dose.     

Deuterium substitution and fluorescence studies on polymer hydrogels and complexes

Deuterium isotope effects on swelling kinetics and volume phase transition in typical polymer hydrogels (poly(N-isopropylacrylamide) and polyacrylamide gels) are discussed. Deuterium substitutions affect on the swelling kinetics and volume phase transition of the polymer hydrogels. The slower swelling kinetics of hydrogels in D₂O than in H₂O arises mainly from the high viscosity of the medium. The deuterium isotope effect on the swelling-shrinking curve of hydrogels would come from the different polymer-solvent interaction. The microenvironments of hydrogels studied by solvatochromic fluorescence probe are compared with the bulk state. The zipper-type hydrogen-bonding inter-polymer complexes (poly(acrylic acid)-polyacrylamide and poly(acrylic acid)-poly(N-acryloylglycineamide)) are also investigated and show the huge isotope effect on the phase separation temperature.     

Swelling behaviors, tensile properties and thermodynamic studies of water sorption of 2-hydroxyethyl methacrylate/epoxy methacrylate copolymeric hydrogels

A series of copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and epoxy methacrylate (EMA) were synthesized by bulk polymerization. Swelling behaviors and tensile properties of hydrogels were studied. Dynamic swelling behaviors of copolymeric hydrogels indicate that the swelling process of these polymers follows Fickian behavior. The equilibrium water content (EWC) decreased and volume fraction of polymer in hydrogel (?₂) increased with EMA content increasing due to its hydrophobicity. The increase of ionic strength of swelling medium or temperature results in a decrease in EWC and an increase in values of ?₂. Young’s modulus and tensile strength of hydrogels, as well as effective crosslink density (v_e), increased as EMA content increased or ionic strength of swelling medium increased, attributing to increasing interaction between hydrophobic groups and polymer-polymer interaction with an increase in EMA content or in ionic strength. The polymer-solvent interaction parameter χ reflecting thermodynamic interaction was also studied. As EMA content, ionic strength of swelling medium or temperature increased, the values of χ increased. The values of χ and its two components χ_H and χ_S varied with increasing T. The negative values and trend of the enthalpy and entropy of dilution derived from values of χ_S and χ_H, could be explained on the basis of structuring of water through improved hydrogen bonding and hydrophobic interaction.     

Formation Mechanism and Tensile Mechanical Properties of Poly(acrylamide-co-octylphenol polyoxyethylene (10) acrylate) Hydrophobic Association Hydrogels With High Toughness

Poly(acrylamide-co-octylphenol polyoxyethylene (10) acrylate) hydrophobic association hydrogels, which is abbreviated to poly(AM-co-OP10/AC) HA-gels, were prepared through micellar copolymerization of acrylamide (AM) and a small amount of octylphenol polyoxyethylene (10) acrylate (OP10/AC) in the presence or absence of sodium dodecyl sulfate (SDS). For poly(AM-co-OP10/AC) HA-gels, formation mechanism was discussed in detail, which can reasonably explain the reason that tensile mechanical properties of the hydrogels (containing SDS) are much higher than those of the hydrogels (not containing SDS). In addition, according to the tensile experimental results of poly(AM-co-OP10/AC) HA-gels, the effect of composition content in the initial solutions on tensile mechanical properties was investigated in detail. The results clearly indicate tensile strength, elastic modulus and elongations for poly(AM-co-OP10/AC) HA-gels strongly depended on composition content in the initial solutions.     

Network structure and swelling behavior of poly(acrylamide/crotonic acid) hydrogels in aqueous salt solutions

Hydrogels with various ionic group contents were prepared from acrylamide and crotonic acid (CrA) monomers with 0–12.9 mol % CrA in aqueous solutions by radiation‐induced polymerization and gelation with γ rays from a ⁶⁰Co source. The volume swelling ratio of the poly(acrylamide/crotonic acid) hydrogels was investigated as a function of the pH and ionic strength of the swelling medium and the type of counterion in the swelling medium. The volume swelling ratio increased with an increase in pH and a decrease in the ionic strength. The volume swelling ratio of these hydrogels was evaluated with an equation, based on the Flory–Huggins thermodynamic theory, the James–Guth phantom network theory, and the Donnan theory of swelling of weakly charged ionic gels, that was modified here for the determination of the molecular weight between crosslinks (M_c) and the polymer–solvent interaction parameter (χ). The modified equation described very well the swelling behavior of the charged polymeric network. The same equation also provided the simultaneous measurement of these parameters for the systems investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1656–1664, 2003     

Dependence of nanophase separated structure of epoxy hydrogels on swelling conditions investigated by SANS

A hydrophilic non-stoichiometric epoxy network was prepared by end-linking reaction of α,ω-diamino terminated poly(oxypropylene)-b-poly(oxyethylene)-b-poly(oxypropylene) (POP-POE-POP) and diglycidyl ether of Bisphenol A propoxylate (PDGEBA) at the excess of amino groups. Series of epoxy hydrogels swollen to various degrees was prepared by swelling of the epoxy network in D₂O and solutions of inorganic salt (KNO₃) in D₂O, respectively, and investigated by small-angle neutron scattering (SANS). Degree of swelling was controlled in two ways: by partial evaporation of the solvent and by KNO₃ concentration in the swelling solution. Nanophase separated structure of all hydrogels was confirmed by SANS. Scattering data were fitted to the Teubner-Strey model assuming bicontinuous locally lamellar structure of the hydrogels. Changes in SANS profiles induced by the presence of KNO₃ in swelling solutions reflect a refinement of the nanophase separated structure of hydrogels caused by improvement of POE-D₂O interaction by means of breakage of deuterium-bonded structure of D₂O by nitrate anions.     

Swelling behavior and network structure of hydrogels synthesized using controlled UV‐initiated free radical polymerization

N‐vinyl‐2‐pyrrolidone (VP) and 2‐hydroxyethyl methacrylate (HEMA) copolymeric gels have been synthesized using UV‐initiated photopolymerization to understand their characteristic behavior for development as a bioengineering material, specifically for tissue expansion. The properties of the gels have been investigated by systematic variation of the monomer feed composition and initiator and crosslinker concentrations as well as UV irradiation intensity, which was controlled by various photomasks. The swelling kinetics and network characteristics for the various hydrogels were investigated through the observation of gel swelling behavior in saline solutions and compression modulus determination of the fully swollen hydrogels. The equilibrium swelling ratio (q_e) of the gels increased as expected with increasing VP content and decreasing crosslinker concentration. However, it was found that as the amount of initiator or UV intensity increased, unexpectedly q_e also increased, which indicates a network structure with decreasing effective crosslink density (ν_e) (or increasing average molecular weight between crosslinks (M_c)). Based on this anomalous swelling behavior and thermal analysis of the gels, a molecular structure is proposed consisting of increasing number of dangling chain ends within the polymer network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1450–1462, 2008     

Synthesis and Properties of Polypyrrole/Chitosan Composite Hydrogels

Conducting polymer hydrogels consisting of polypyrrole (PPy) and chitosan (CS) are prepared by static polymerization of pyrrole using methyl orange (MO) as the dopant and Fe₂(SO₄)₃ as the oxidant in the CS aqueous solution. PPy/CS composite hydrogels not only have good electrical conductivities, but also exhibit excellent swelling/deswelling behaviors due to the participation of one-dimensional conducting PPy blocks in the hydrogel network. The effects of the amount of the oxidant and ionic strength on the physical properties of PPy/CS composite hydrogels are studied in detail. The results show that PPy/CS composite hydrogels have improved water absorbencies in saline solutions compared with the conventional polyelectrolyte hydrogel.