Synthesis of nano‐sized magnetite mesoporous carbon for removal of Reactive Yellow dye from aqueous solutions

In this study, core‐shell structures of magnetite nanoparticles coated with CMK‐8 ordered mesoporous carbon (Fe₃O₄@SiO₂‐CMK‐8 NPs) have been successfully synthesized for the first time by carbonizing sucrose inside the pores of the Kit‐6 mesoporous silica. The nano‐sized mesoporous particles were characterized by X‐ray diffraction, Fourier transform‐infrared spectroscopy, scanning electron microscope, dynamic light scattering, vibrating‐sample magnetometer, Brunauer–Emmett–Teller (BET) and transmission electron microscopy instruments. The obtained nanocomposite was used for removal of Reactive Yellow 160 (RY 160) dye from aqueous samples. The N₂ adsorption–desorption method (at 77 K) confirmed the mesoporous structure of synthesized Fe₃O₄@SiO₂‐CMK‐8 NPs. Also, the surface area was calculated by the BET method and Langmuir plot as 276.84 m²/g and 352.32 m²/g, respectively. The surface area, volume and pore diameter of synthesized nanoparticles (NPs) were calculated from the pore size distribution curves using the Barrett–Joyner–Halenda formula (BJH). To obtain the optimum experimental variables, the effect of various experimental parameters on the dye removal efficiency was studied using Taguchi orthogonal array experimental design method. According to the experimental results, about 90.0% of RY 160 was removed from aqueous solutions at the adsorbent amount of 0.06 g, pH 3 and ionic strength = 0.05 m during 10 min. The pseudo‐second order kinetic model provided a very good fit for the RY 160 dye removal (R² = 0.999). The Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models were applied to describe the equilibrium isotherms, and the Langmuir isotherm showed the best fit to data with the maximum adsorption capacity of 62.893 mg/g. Furthermore, the Fe₃O₄@SiO₂‐CMK‐8 NPs could be simply recovered by external magnet, and exhibited recyclability and reusability for a subsequent six runs.     

Synthesis and characterisation of magnetic activated carbon/diopside nanocomposite for removal of reactive dyes from aqueous solutions: experimental design and optimisation

In this work, a series of magnetic activated carbon/nanodiopside (Fe₃O₄/AC/Diop) nanocomposites were synthesised and used for the removal of reactive green KE-4BD dye from the aqueous solution. After preparation of nanodiopside by sol-gel method and activated carbon from coconut husk, first, Fe₃O₄/AC composite was prepared by in situ synthesis of Fe₃O₄ nanoparticles between activated carbon pores, and then, different percentages of Fe₃O₄/AC/Diop nanocomposites were prepared by simple mixing of Fe₃O₄/AC composite and Diop in ethanol. Formation of Fe₃O₄/AC and Fe₃O₄/AC/Diop composites was characterised by FTIR, field emission scanning electron microscopy, BET, XRD and vibrating sample magnetometer analyses. Thermogravimetric analysis was used to show the adsorption capacity of the adsorbent more accurately. Effects of amount of adsorbent, initial pH, contact time and dye concentration on reactive green dye removal were also studied using central composite design. Optimal conditions for maximum reactive green KE-4BD dye adsorption (98.35%) process were as follows: pH= 4.90, adsorbent amount: 0.015 g, dye concentration: 37.17 mg/L and contact time: 10.12 min, respectively. In addition, the adsorption kinetics, thermodynamics and isotherms were examined. Adsorption isotherms (q_max: 344.827 mg/g), kinetics and thermodynamics were demonstrated that the sorption processes were better described by the pseudo-second-order equation and the Langmuir equation.     

Treatment of anionic dye aqueous solution using Ti,HDTMA and Al/Fe pillared bentonite. Essay to regenerate the adsorbent

In this study, the adsorption removal of an anionic dye (Congo red) by a local bentonite before and after modification was studied. The modification of the bentonite was made by organophilisation using surfactant (HDTMA) and by pillaring process to obtain a bentonite with Ti pillars and with mixed pillars of Fe/Al. The various synthesized materials are characterized by different techniques such as DRX, MET, N₂ adsorption-desorption, Zeta potential measurement. Results show the development of the texture and the structure of the bentonite after modification. The various adsorbents synthesized show an increase in the adsorption capacity of Congo Red compared to the initial bentonite. Adsorption isotherms are described by the Langmuir model in all cases except that for Ti pillared bentonite, the Freundlich model is more suitable. Pseudo-second order is better for describing the adsorption process. Also, regeneration of the adsorbent is approached in this study by photochemical way and the results show a total regeneration of the adsorbent.     

Removal of an azo-metal complex textile dye from colored aqueous solutions using an agro-residue

The pine leaves which are an agricultural residue were used in its natural form as biosorbent for the removal of Acid Yellow 220 (AY 220) dye from aqueous solutions. The sorption experiments were carried out as a function of solution pH, biosorbent dosage, biosorbent size, dye concentration, temperature, contact time and ionic strength. The sorption isotherms closely followed the Langmuir model. The monolayer sorption capacity of the pine leaves for AY 220 was found as 40.00 mg g^{− 1}. It was shown that pseudo-second order equation could best describe the sorption kinetics. The thermodynamic data indicated that the sorption system was spontaneous, endothermic and physical process. Based on the results of present investigation, the pine leaves could be used as a suitable alternative biosorbent for the elimination of AY 220 from aqueous solutions.     

Adsorption of tartrazine from an aqueous solution by octadecyltrimethylammonium bromide-modified bentonite: Kinetics and isotherm modeling

A modified bentonite was prepared at different surfactant (ODTMA) loadings through ion exchange. The obtained organobentonite adsorbent materials were then used for the removal of an anionic dye, tartrazine, from an aqueous solution. The bentonite was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, and Brunauer- Emmett-Teller (BET) method. The modification of organophilic bentonite by ODTMA increases the basal spacing d₀₀₁ from 24.1 to 39.1 Å when the cation exchange capacity increases from 1 to 4. The increase in the spacing, due to the basic organic modifications, was confirmed by the results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and BET. The effects of contact time, initial concentration, and solution pH onto an adsorbed amount of tartrazine were investigated. To predict adsorption isotherm, the experimental data were analyzed using the Langmuir and Freundlich isotherm equations. It was determined that the isotherm data were fitted to the Langmuir isotherm. The adsorption process was also found to follow a pseudo-second-order kinetic model.     

Interaction between anionic surfactants and oil dye in the aqueous solutions

The interactions between 4-phenylazo-1-naphthylamine and 6 sodium alkyl sulfates have been studied by a spectrophotometer. At lower concentrations than each CMC, 3 surfactants (octyl, decyl and dodecyl sulfate) and the dye formed hydrophobic complexes with a binding molar ratio of 11, while the others (tetradecyl, hexadecyl, and octadecyl sulfate) and the dye made 21 complexes. The wavelength of the maximal absorption is 440 nm in the former, and 520 nm in the latter. In the neighborhood of each CMC region, thermochromism occurred in every surfactant solution. The temperature at which the maximal absorption moved from 520 nm to 440 nm increased with an increase in the number of carbon atoms in the surfactant molecules. At higher concentrations than each CMC, in the case of the octyl and decyl sulfate, the maximal absorption occurred at the 440 nm band above room temperature; in the case of the dodecyl, tetradecyl, and hexadecyl sulfates, the maximal absorption occurred at the 520 nm band, regardless of temperature. In the case of octadecyl sulfate, the maximal absorption moved from 610 nm to 520 nm with increase in temperature. It is found that the protonation equilibrium of the dye is dependent on the micellar structure through the differences in the alkyl chain lengths of the surfactants, and the differences in interaction with surfactant crystals.     

Role of clay-based membrane for removal of copper from aqueous solution

The present study focuses on the fabrication of polysulfone (PSf)-clay minerals impregnated hybrid membrane for treatment of Cu (II) ions. Blending and phase inversion methods have been employed to develop clay-based membranes by the mixing of bentonite, sepiolite and zeolite in the matrix of PSf. Moreover, characterization of fabricated membranes was carried out using SEM, FTIR, zeta potential, pore size and water contact angle measurement. Adsorption and filtration experiments were conducted to evaluate the permeation performance of the membrane. Obtained results of permeation study reveal that the presence of clay minerals in the matrix of modified membrane not only increases the adsorption and rejection efficiency for Cu (II) but, it also improves the flux of pure water. Among all developed membranes, the membrane prepared by the mixing of zeolite demonstrates the highest adsorption (2.82 mg/g) and rejection value (97%) towards Cu (II) at low pressure (0.5 bar). Regeneration performance results confirm the reusability of membrane up to 3–5 cycles along with 82.5–90% metal recovery. Based on significant metal recovery, clay-based low-cost zeolite/PSf membrane could be used to remove Cu (II) from water at low pressure to replace current conventional membrane.     

Evaluation of the stability of dye heteroassociates formed in aqueous solutions

The additive tetraphenylarsonium-tetraphenylborate model of interactions was found to be applicable to the problem of “preexperimental” evaluation of the stability of associates formed by dye cations (Ct⁺) and anions (An^?) in aqueous solutions. The possibility of predicting equilibrium association constants K _as from preliminarily calculated ΔG(Ct⁺) and ΔG(An^?) and of solving the inverse problem was analyzed. The invariability of the ΔG(Ct⁺) and ΔG(An^?) values and the problem of bringing calculation results in consistency with the experimental K _as values are discussed.     

Geopolymeric adsorbents from fly ash for dye removal from aqueous solution

Adsorbents from coal fly ash treated by a solid-state fusion method using NaOH were prepared. It was found that amorphous aluminosilicate geopolymers would be formed. These fly ash-derived inorganic polymers were assessed as potential adsorbents for removal of some basic dyes, methylene blue and crystal violet, from aqueous solution. It was found that the adsorption capacity of the synthesised adsorbents depends on the preparation conditions such as NaOH:fly-ash ratio and fusion temperature with the optimal conditions being at 1.2:1 weight ratio of Na:fly-ash at 250-350 degrees C. The synthesised materials exhibit much higher adsorption capacity than fly ash itself and natural zeolite. The adsorption isotherm can be fitted by Langmuir and Freundlich models while the two-site Langmuir model producing the best results. It was also found that the fly ash derived geopolymeric adsorbents show higher adsorption capacity for crystal violet than methylene blue and the adsorption temperature influences the adsorption capacity. Kinetic studies show that the adsorption process follows the pseudo second-order kinetics.     

60Co removal from aqueous solutions using charcoal

Charcoal, treated in different ways, can be used in the separation of⁶⁰Co from aqueous solutions. The cobalt species involved in the process were identified by high voltage electrophoresis. The best results were obtained using thermally and chemically treated charcoal with a maximum retention of 1.24 mmol cobalt per gram. It was also found that the cobalt was not desorbed from the chemically treated charcoal when washed with distilled water. However, it was eluted from the charcoal with 2.3N hydrochloric solution. Samples containing⁶⁰Co were analysed during the sorption process by gamma-ray spectrometry.     

The removal of thorium from aqueous solutions using zeolites

The ability of zeolites to remove thorium-232 from naturally radioactive thorium nitrate solutions was studied by ion exchange, adsorption and surface phenomena. The best zeolites were a clinoptilolite from Mudhills, California, USA and a mordenite rich tuff from Eastgate, Nevada, USA. As the concentration of thorium in solution was increased the mechanism of thorium removal switches from that of partial ion-exchange to a surface precipitation. This was confirmed by electron probe microanalysis (EPMA) in conjunction with XRD and Energy Dispersive X-ray analysis (EDX). A Langmuir-type of adsorption occurred with the thorium-232 daughter isotopes at the same time as partial exchange/precipitation of the thorium parent which is in regular equilibrium with its natural daughters. Some experiments with²³⁴Th were carried out to confirm this hypothesis as well as column experiments to confirm the usefulness of the Th removal.     

Removal of Congo Red dye from its aqueous solution using natural coagulants

The textile dyeing industry consumes large quantities of water and produces large volumes of wastewater from different processes in dyeing and finishing processes. The low-cost, easily available naturally prepared coagulants like Surjana seed powder (SSP), Maize seed powder (MSP) and Chitosan as an ideal alternative to recent expensive coagulant methods for Congo Red (CR) dye removal has been investigated in this study. Various process parameters like pH, coagulant dose, flocculation time and temperature and also its optimization were exploited. The maximum percentage CR removal was found to be 98.0, 94.5 and 89.4 for SSP, Chitosan and MSP, respectively, at pH 4.0, coagulant dose of 25 mg/l, flocculation time 60 min and temperature of 340 K. The Sludge Volume Index (SVI) and turbidity were calculated for these parameters including process optimization. SSP found more preferable for CR removal and Chitosan was a better coagulant, which corresponds to SVI than the other coagulants investigated.     

Radium removal from aqueous solutions by variously supported ligands

A set of ligands loaded on various supports have been tested to remove radium from aqueous solutions. Crown ethers have demonstrated inefficiency in all cases, while open chain ligands (podands) have shown satisfactory distribution coefficients and uptake rates in particular conditions. Hypotheses to explain the phenomenon are briefly discussed.     

Adsorption characteristics of surfactants and phenol on modified zeolites from their aqueous solutions

Adsorption characteristics of anion-, cation- and nonion-type surfactants and phenol from their aqueous solution on Na-Y zeolites modified by SiCl₄ treatment and NA-ZSM-5 zeolites with several Si/Al ratios were measured. Surfactants used were sodium dodecylbenzenesulfonte (DBS), laurylpyridinium chloride (LPC), polyoxyethylenenonylphenylether (POENPE) and phenol.Adsorption of surfactants was enhanced by SiCl₄ treatment of Na-Y, which indicates an important role of the hydrophilic-hydrophobic character in the adsorption.Adsorption isotherms were in general of Langmuir type and adsorbed amount depended on the Al/(Si+Al) or Si/Al ratio of zeolite frameworks. In case of DBS adsorption of Na-ZSM-5 series, adsorption occurred only on the outer surface due to steric hindrance. LPC adsorption abilities were observed on even hydrophilic zeolites and were ascribed to ion exchange effect. In case of phenol adsorption on hydrophobic Na-Y, the adsorption isotherm was of Type V according to BDDT classification.     

Fe3O4-CuO-activated carbon composite as an efficient adsorbent for bromophenol blue dye removal from aqueous solutions

Dye wastewater from industries is posing tremendous health hazards. The lethal dyes can be eliminated using nanomaterials and scientific approach like adsorption which is facile, cheap, safe as well as ecofriendly. Fe₃O₄-CuO-AC composite was prepared by a hydrothermal method and used for the removal of dyes in wastewater. The composite material was characterized by various techniques such as XRD, SEM, EDS, TEM and FT-IR. The Fe₃O₄-CuO-AC composite was used to treat five types of dyes in water. Fe₃O₄-CuO-AC composite showed the highest adsorption capability for bromophenol blue (BPB) dye. The effects of initial concentration, pH, the amount of adsorbent and temperature were also studied. The optimum conditions were found to be 20 ppm dye concentration, pH 9, an adsorbent dose of 0.06 gL^─1 at 65 °C. A removal efficiency of 97% was obtained for BPB dye during 120 min of adsorption. Kinetic studies indicated that a pseudo-second order is the most suitable model for the adsorption process. The Fe₃O₄-CuO-AC composite showed better adsorption capacity as compare to Fe₃O₄-AC except for the Methyl green dye. The maximum adsorption capacity was found to be 88.60 mg/g for BPB. Additionally, the thermodynamic parameters (ΔS°, ΔH° and ΔG°) showed that the process was spontaneous and exothermic. All the above results revealed that the Fe₃O₄-CuO-AC compositecan be an effective adsorbent for removing dyes from wastewater.     

An evaluation of coal fly ash as an adsorbent for the removal of methylene blue from aqueous solutions: kinetic and thermodynamic studies

Abstract

In this study the effect of the dose and particle size of the adsorbent, initial dye concentration, initial pH, contact time and temperature were investigated for the removal of by means of fly ash (FA) methylene blue (MB) from an aqueous solution. The FA dose was found to be 2.0?g and the under 270 mesh sized particles were found to be effective particles for adsorption. The adsorption process reached its maximum value at 0.5?mg/L dye concentration and attained equilibrium within 10?minutes. The adsorption isotherm was found to follow the Langmuir model. The estimated adsorption free energy (ΔG^o), enthalpy change (ΔH^o), and entropy change (ΔS^o) for the adsorption process were ?37.77?kJ mol^?1, ?13.44?kJ mol^?1 and 122 J mol^?1 K^?1 respectively at 298 K. The maximum adsorption capacity is 0,12?mg g^?1 at 298 K and 0,07?mg g^?1 at 398 K. The adsorption process was exothermic, feasible and spontaneous. The positive value of ΔS^o shows the affinity of FA for MB while the low value of ΔG^o suggests a physical adsorption process.     

Gamma radiolysis of erythrosine dye in aqueous solutions

Beryllium-7, mainly measured via γ-spectrometry, is used as a (natural) radiotracer for education and science. For activities?<?0.1 Bq and samples containing also longer-lived ¹⁰Be, accelerator mass spectrometry (AMS) is the method-of-choice. We demonstrate that ⁷Be and ¹⁰Be can be quantified at the Dresden AMS facility on the same prepared BeO. Detection limits (⁷Be) are?~?0.6 mBq. Samples as small as tens of millilitres of rainwater can be chemically processed (after acidification) within a few hours without expensive and slow ion exchange. Isobar (⁷Li) suppression by chemistry and AMS is sufficient to guarantee for an ultrasensitive, cheap, and fast detection method for ⁷Be allowing high sample throughput.

     

Extraction and preconcentration of anthocyan dye from aqueous solutions with water-soluble poly-N-vinylamides

Extraction of an anthocyan dye with poly-N-vinylpyrrolidone (PVP) and poly-N-vinylcaprolactam (PVC) under the conditions of separation of aqueous solutions of this polymer into two phases in the presence of salting-out agents (sodium chloride and sodium or ammonium sulfate) was studied.     

Thermodynamics of surfactant-dye complex formation in aqueous solutions II. Sodium dodecyl sulfate and some azo oil dye systems

Spectrophotometric and thermodynamic investigations are reported of the interactions between anionic surfactant (sodium dodecyl sulfate) and six azo oil dyes (benzene azo naphthalene type) which have an amino group at 4-position of naphthalene. A pronounced spectral change in the dye solution occurs on addition of surfactant. For increasingly surfactant concentrations (below the CMC), the interaction between dye and surfactant is so sharp that the systems may be said to exhibit an isosbestic point; then a new absorption band appears at longer wavelengths. The spectral data can be quantitatively interpreted in terms of a complex formation. The equilibrium coefficients of the complex formation are determined at different temperatures. The thermodynamic parameters of the complex formations (the free energy change (G), enthalpy change (H) and change in entropy (S) are also calculated. The reaction of complex formation is exothermic (H negative).G is dependent on the hydrophobic nature andpKa of the dye. These complexes will form due to hydrophilic-hydrophilic interaction and will become more stable due to hydrophobic-hydrophobic interaction.With increasing amounts of complex, the infinite adsorption, the exhaustion and the rate constant of dyeing for nylon decrease.     

Thorium removal from aqueous solutions of Mexican erionite and X zeolite

Thorium(IV) removal from aqueous solutions by erionite and X zeolite was investigated. The Th(IV) uptake at different thorium nitrate concentrations (from 0.25 to 25 mM) was evaluated. The thorium content in the aqueous solution was determined by neutron activation analysis. Th(IV) retained by zeolites was 1.7 and 3.7 meq/g for erionite and X zeolite. In order to explain the thorium sorption process in both zeolites, ion exchange mechanism was considered. It was found that thorium sorption behavior is strongly dependent of the type of zeolite, the separation factor for Mexican erionite was α^Th(IV) _Na(I)<1, this zeolite shows preference for Na(I) rather than for Th(IV), however, by X zeolite, α^Th(IV) _Na(I)~1, this value suggested an approximately ideal ion exchange behavior. The effect of pH on thorium sorption was also considered. This revised version was published online in August 2006 with corrections to the Cover Date.