Influence of bidentate phosphine ligands on the chemistry of [FeFe]-hydrogenase model: insight into molecular structures and electrochemical characteristics

Substitution of carbonyl ligands of the hydrogenase model complex [Fe₂(μ-SeCH₂CH(Me)CH₂Se-μ)(CO)₆] ( A ), by 1,1′-bis (diphenylphosphino)ferrocene (dppf), 1,2-bis (diphenylphosphino)benzene (dppbz) or 1,2-bis (diphenylphosphino)acetylene (dppac) is investigated. It is found that the reaction product depends on the diphosphine used. In the case of dppf, the product is an intramolecular bridged disubstituted complex [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{μ,κ¹,κ¹(P,P)-dppf}] ( 1 ), while the dppac-reaction produces an intermolecular bridged tetra-iron model [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₅]₂{μ,κ¹,κ¹(P,P)-dppac} ( 2 ). However, the dppbz-reaction gives [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{κ²(P,P)-dppbz}] ( 3 ) in which the dppbz ligand is bonded to one Fe atom in a chelated manner. The newly prepared complexes ( 1 – 3 ) have been characterized by elemental analysis, IR, ¹H-, ¹³C{H}-, ³¹P{H}-, ⁷⁷Se{H}-NMR spectroscopy and X-ray structure determination. The electrochemical behavior of 2 and 3 , in absence and presence of acid, is described by cyclic voltammetric measurements in CH₂Cl₂.     

Phenyl-functionalized diiron propanediselenolato complexes containing the chelated or bridged 1,3-bis(diphenylphosphine)propane ligand

Abstract

Reaction of precursor Fe₂[(μ-SeCH₂)₂CHC₆H₅](CO)₆ (A) with 1,3-bis(diphenylphosphine)propane (dppp) in refluxing xylene yielded one diphosphine-containing complex Fe₂[(μ-SeCH₂)₂CHC₆H₅](CO)₄(κ²-dppp) (1) with the diphosphine of dppp displacing the apical and one basal carbonyl ligands of a single iron center, while treatment of precursor A with one-half equivalent of dppp in MeCN in the presence of Me₃NO·2H₂O gave another diphosphine-containing complex {Fe₂[(μ-SeCH₂)₂CHC₆H₅](CO)₅}₂(μ,κ¹,κ¹-dppp) (2) with the diphosphine of the dppp bridging two diiron diselenolato clusters upon replacing one of basal carbonyls, respectively. The structures of both complexes were fully characterized by spectroscopic methods and X-ray crystallography. The electrochemical behaviors of both complexes were investigated by cyclic voltammetry (CV) and the electrochemical reduction of protons from acetic acid to give dihydrogen catalyzed by complex Fe₂[(μ-SeCH₂)₂CHC₆H₅](CO)₄(κ²-dppp) was observed.     

Pyridine-2-olato chelated ruthenium(II) organometallics incorporating imine-phenol function: spectroscopic,structural, electrochemical,and theoretical studies

The heterogeneous phase reaction of excess sodium salt of 2-hydroxypyridine (OHpy) with [Ru(κ²C,O-RL)(PPh₃)₂(CO)Cl] (1) afforded complexes of the type [Ru(κ¹C-RL)(PPh₃)₂(CO)(Opy)] (2) in excellent yield [κ²C,O-RL is 4-methyl-6-((N-R-arylimino)methyl)phenolato-C²,O), κ¹C-RL is 4-methyl-6-((N-R-arylimino)methyl)phenol-C²) and R is H, Me, OMe, Cl]. The chelation of Opy is attended with the cleavage of Ru-O and Ru-Cl bonds and iminium-phenolato → imine-phenol prototropic shift. The 1→2 conversion is irreversible and the type 2 species are thermodynamically more stable than the acetate, nitrite, and nitrate complexes of 1. The spectral (UV-vis, IR, NMR) and electrochemical data of the complexes are reported. In dichloromethane solution the complexes display one quasi-reversible Ru^III/Ru^II cyclic voltammetric response with E_1/2 in the range 0.65–0.69 V versus Ag/AgCl. The crystal and molecular structures of [Ru(κ¹C-HL)(PPh₃)₂(CO)(Opy)]·2C₆H₆·0.5H₂O, 2(H)·2C₆H₆·0.5H₂O and [Ru(κ¹C-ClL)(PPh₃)₂(CO)(Opy)]·2C₆H₆·0.25H₂O, 2(Cl)·2C₆H₆·0.25H₂O are reported, which revealed a distorted octahedral RuC₂P₂NO coordination sphere. The pairs (P,P), (C,O), and (C,N) define the three trans directions. The electronic structures of the complexes are also scrutinized by density functional theory.     

Synthesis and structural characterization of ruthenium complexes with 1-aryl-imidazole-2-thione

Treatment of [RuCl₂(PPh₃)₃] with 2 equiv. Himt^MPh (Himt^MPh?=?1-(4-methyl-phenyl)-imidazole-2-thione) in the presence of MeONa afforded cis-[Ru(κ ²-S,N-imt^MPh)₂(PPh₃)₂] (1), while interaction of [RuCl₂(PPh₃)₃] and 2 equiv. Himt^MPh in tetrahydrofuran (THF) without base gave [RuCl₂(κ ¹-S-Himt^MPh)₂(PPh₃)₂] (2). Treatment of [RuHCl(CO)(PPh₃)₃] with 1 equiv. Himt^MPh in THF gave [RuHCl(κ ¹-S-Himt^MPh)(CO)(PPh₃)₂] (3), whereas reaction of [RuHCl(CO)(PPh₃)₃] with 1 equiv. of the deprotonated [imt^MPh]^? or [imt^NPh]^? (imt^NPh?=?1-(4-nitro-phenyl)-2-mercaptoimidazolyl) gave [RuH(κ ²-S,N-imt^RPh)(CO)(PPh₃)₂] (R?=?M 4a, R?=?N 4b). The ruthenium hydride complexes 4a and 4b easily convert to their corresponding ruthenium chloride complexes [RuCl(κ ²-S,N-imt^MPh)(CO)(PPh₃)₂] (5a) and [RuCl(κ ²-S,N-imt^NPh)(CO)(PPh₃)₂] (5b), respectively, in refluxing CHCl₃ by chloride substitution of the RuH. Photolysis of 5a in CHCl₃ at room temperature afforded an oxidized product [RuCl₂(κ ²-S,N-imt^MPh)(PPh₃)₂] (6). Reaction of 6 with excess [imt^MPh]^? afforded 1. The molecular structures of 1·EtOH, 3·C₆H₁₄, 4b·0.25CH₃COCH₃, and 6·2CH₂Cl₂ have been determined by single-crystal X-ray crystallography.     

Syntheses,characterization, and crystal structures of ruthenium(II)/(III) complexes with tridentate salicylaldiminato ligands

Treatment of [Ru(PPh₃)₃Cl₂] with one equivalent of tridentate Schiff base 2-[(2-dimethylamino-ethylimino)-methyl]-phenol (HL) in the presence of triethylamine afforded a ruthenium(III) complex [RuCl₃(κ²-N,N-NH₂CH₂CH₂NMe₂)(PPh₃)] as a result of decomposition of HL. Interaction of HL and one equivalent of [RuHCl(CO)(PPh₃)₃], [Ru(CO)₂Cl₂] or [Ru(tht)₄Cl₂] (tht = tetrahydrothiophene) under different conditions led to isolation of the corresponding ruthenium(II) complexes [RuCl(κ³-N,N,O-L)(CO)(PPh₃)] (2), [RuCl(κ³-N,N,O-L)(CO)₂] (3), and a ruthenium(III) complex [RuCl₂(κ³-N,N,O-L)(tht)] (4), respectively. Molecular structures of 1·CH₂Cl₂, 2·CH₂Cl₂, 3 and 4 have been determined by single-crystal X-ray diffraction.     

以2-(1-吡唑基甲基)吡啶类化合物为配体的羰基钼、钨衍生物的合成及结构

合成了2-[1-(3-叔丁基)吡唑基甲基]吡啶(CH2(Py)(3-ButPz)),并研究了羰基钼(钨)与该配体及其类似物2-(1-吡唑基甲基)吡啶(CH2(Py)(Pz))和2-[1-(3,5-二甲基)吡唑基甲基]吡啶(CH2(Py)(3,5-Me2Pz))的反应,合成了6个含双齿螯合的2-(1-吡唑基甲基)吡啶类配体的四羰基金属衍生物CH2(Py)(3-ButPz)M(CO)4,CH2(Py)(Pz)M(CO)4和CH2(Py)(3,5-Me2Pz)M(CO)4(M=Mo或W)。当用SnCl4处理CH2(Py)(3,5-Me2Pz)M(CO)4时,Sn-Cl键对金属中心发生氧化加成得到2个杂双核金属有机化合物CH2(Py)(3,5-Me2Pz)M(CO)3(Cl)SnCl3。所有新化合物均通过了红外和核磁的表征,CH2(Py)(3-ButPz)W(CO)4和CH2(Py)(3,5-Me2Pz)W(CO)3(Cl)SnCl3的结构还得到了X-射线单晶衍射的确证。用循环伏安法测定了四羰基金属衍生物的电化学性质。     

Syntheses,crystal structures,and electrochemistry of novel Fe2SN and FeSN carbonyl complexes with pendant bases

Reactions of Fe₂(CO)₉ with thioacylhydrazones ArCH=NNHCSPh in THF afford Fe₂(CO)₆(μ-κ²S:κ²N-PhC(S)=NNCHArCHArN(CHAr)N=CSPh) (1, Ar?=?C₆H₅; 3, Ar?=?4-CH₃C₆H₄) and Fe(CO)₃(κ²S:N-PhC(=S)NHNCHArCHArN(CHAr)N=CSPh) (2, Ar?=?C₆H₅; 4, Ar?=?4-CH₃C₆H₄). They have been characterized by elemental analyses, IR, ¹H NMR, and ¹³C NMR and structurally determined by X-ray crystallography. Electrochemical studies reveal that when using HOAc as a proton source, they exhibit high catalytic H₂-production.     

Asymmetric diosmium sawhorse complexes

Three asymmetric diosmium(I) carbonyl sawhorse complexes have been prepared by microwave heating. One of these complexes is of the type Os₂(μ‐O₂CR)(μ‐O₂CR′)(CO)₄L₂, with two different bridging carboxylate ligands, while the other two complexes are of the type Os₂(μ‐O₂CR)₂(CO)₅L, with one axial CO ligand and one axial phosphane ligand. The mixed carboxylate complex Os₂(μ‐acetate)(μ‐propionate)(CO)₄[P(p‐tolyl)₃]₂, ( 1 ), was prepared by heating Os₃(CO)₁₂ with a mixture of acetic and propionic acids, isolating Os₂(μ‐acetate)(μ‐propionate)(CO)₆, and then replacing two CO ligands with two phosphane ligands. This is the first example of an Os₂ sawhorse complex with two different carboxylate bridges. The syntheses of Os₂(μ‐acetate)₂(CO)₅[P(p‐tolyl)₃], ( 3 ), and Os₂(μ‐propionate)₂(CO)₅[P(p‐tolyl)₃], ( 6 ), involved the reaction of Os₃(CO)₁₂ with the appropriate carboxylic acid to initially produce Os₂(μ‐carboxylate)₂(CO)₆, followed by treatment with refluxing tetrahydrofuran (THF) to form Os₂(μ‐carboxylate)₂(CO)₅(THF), and finally addition of tri‐p‐tolylphosphane to replace the THF ligand with the P(p‐tolyl)₃ ligand. Neutral complexes of the type Os₂(μ‐O₂CR)₂(CO)₅L had not previously been subjected to X‐ray crystallographic analysis. The more symmetrical disubstituted complexes, i.e. Os₂(μ‐formate)₂(CO)₄[P(p‐tolyl)₃]₂, ( 8 ), Os₂(μ‐acetate)₂(CO)₄[P(p‐tolyl)₃]₂, ( 4 ), and Os₂(μ‐propionate)₂(CO)₄[P(p‐tolyl)₃]₂, ( 7 ), as well as the previously reported symmetrical unsubstituted complexes Os₂(μ‐acetate)₂(CO)₆, ( 2 ), and Os₂(μ‐propionate)₂(CO)₆, ( 5 ), were also prepared in order to examine the influence of axial ligand substitution on the Os—Os bond distance in these sawhorse molecules. Eight crystal structures have been determined and studied, namely μ‐acetato‐1κO:2κO′‐μ‐propanoato‐1κO:2κO′‐bis[tris(4‐methylphenyl)phosphane]‐1κP,2κP′‐bis(dicarbonylosmium)(Os—Os) dichloromethane monosolvate, [Os₂(C₂H₃O₂)(C₃H₅O₂)(C₂₁H₂₁P)₂(CO)₄]·CH₂Cl₂, ( 1 ), bis(μ‐acetato‐1κO:2κO′)bis(tricarbonylosmium)(Os—Os), [Os₂(C₂H₃O₂)₂(CO)₆], ( 2 ) (redetermined structure), bis(μ‐acetato‐1κO:2κO′)pentacarbonyl‐1κ²C,2κ³C‐[tris(4‐methylphenyl)phosphane‐1κP]diosmium(Os—Os), [Os₂(C₂H₃O₂)₂(C₂₁H₂₁P)(CO)₅], ( 3 ), bis(μ‐acetato‐1κO:2κO′)bis[tris(4‐methylphenyl)phosphane]‐1κP,2κP‐bis(dicarbonylosmium)(Os—Os) p‐xylene sesquisolvate, [Os₂(C₂H₃O₂)₂(C₂₁H₂₁P)₂(CO)₄]·1.5C₈H₁₀, ( 4 ), bis(μ‐propanoato‐1κO:2κO′)bis(tricarbonylosmium)(Os—Os), [Os₂(C₃H₅O₂)₂(CO)₆], ( 5 ), pentacarbonyl‐1κ²C,2κ³C‐bis(μ‐propanoato‐1κO:2κO′)[tris(4‐methylphenyl)phosphane‐1κP]diosmium(Os—Os), [Os₂(C₃H₅O₂)₂(C₂₁H₂₁P)(CO)₅], ( 6 ), bis(μ‐propanoato‐1κO:2κO′)bis[tris(4‐methylphenyl)phosphane]‐1κP,2κP‐bis(dicarbonylosmium)(Os—Os) dichloromethane monosolvate, [Os₂(C₃H₅O₂)₂(C₂₁H₂₁P)₂(CO)₄]·CH₂Cl₂, ( 7 ), and bis(μ‐formato‐1κO:2κO′)bis[tris(4‐methylphenyl)phosphane]‐1κP,2κP‐bis(dicarbonylosmium)(Os—Os), [Os₂(CHO₂)₂(C₂₁H₂₁P)₂(CO)₄], ( 8 ).     

Synthesis and physicochemical properties of fac-[Re(CO)3(κ2-N,N-dpkfah)Cl], dpkfah=di-2-pyridyl ketone 2-furoic acid hydrazone: the molecular structure of fac-[Re(CO)3(κ2-N,N-dpkfah)Cl] · acetone

Reaction between [Re(CO)₅Cl] and di-2-pyridyl ketone 2-furoic acid hydrazone (dpkfah) (1) in refluxing toluene gave fac-[Re(CO)₃(κ²-N,N-dpkfah)Cl] (2). Spectroscopic and electrochemical measurements disclosed sensitivity of 2 to its surroundings. ¹H-NMR measurements showed that the amide proton exchanged with solvent protons, and its chemical shift is solvent and temperature dependent, while the chemical shifts of aromatic protons are solvent and temperature independent. Electronic absorption spectra of 2 divulged two intra-ligand charge transfer transitions (ILCT) in protophilic solvents and a single ILCT transition in non-protophilic solvents. Optical measurements on protophilic solutions of 2 established an equilibrium between 2 and its conjugate base, fac-[Re(CO)₃(κ²-N,N-dpkfah-H)Cl]^? (3). Thermo-optical measurements confirmed that the interconversion between 2 and 3 and gave ΔG ^ø values of ?26.48 and 22.99?kJ?mol^?1, respectively, for the protonation of DMF and DMSO by 2. Optosensing measurements showed that [MCl₂] (M?=?Zn, Cd, or Hg) in concentrations as low as 1.00?×?10^?7?mol?L^?1 can be detected and determined using protophilic solutions of 2. Electrochemical measurements showed 2 to be more stable in CH₃CN than DMF. Single-crystal X-ray structural analysis on fac-[Re(CO)₃(κ²-N,N-dpkfah)Cl]?·?acetone (4) obtained from an acetone solution of 2 confirmed the solvent–complex interaction and revealed two symmetry-independent molecules in the asymmetric unit. The extended structure of 4 disclosed parallel stacks connected via a network of classic and non-classic hydrogen bonds.     

Allyl isomerization mediated by cyclopentadienyl ruthenium carbonyl compounds

Three new diruthenium complexes, namely (η ⁵-C₅H₄C(CH₂)₄CH=CHCH₃)₂Ru₂(CO)₂(μ-CO)₂ (1), (η ⁵-C₅H₄CEt₂CH=CHCH₃)₂Ru₂(CO)₂(μ-CO)₂ (2), and (η ⁵-C₅Me₄CH=CHCH₃)₂Ru₂(CO)₂(μ-CO)₂ (3), were synthesized and characterized by elemental analysis, IR and ¹H-NMR spectra. The crystal structures of complexes 1 and 2 were determined by X-ray single-crystal diffraction and showed that the allyl reagents used in their synthesis underwent isomerization to give the corresponding methyl–vinyl complexes. The X-ray crystal structures of complexes 1 and 2 confirm the presence of both bridging and terminal CO groups. A possible mechanism for the observed alkene isomerizations is discussed.     

Structural studies of diiron complexes with monophosphine ligands tris(4-chlorophenyl)phosphine or diphenyl-2-pyridylphosphine

Four diiron dithiolate complexes with monophosphine ligands have been prepared and structurally characterized. Reactions of (μ-SCH₂CH₂S-μ)Fe₂(CO)₆ or [μ-SCH(CH₃)CH(CH₃)S-μ]Fe₂(CO)₆ with tris(4-chlorophenyl)phosphine or diphenyl-2-pyridylphosphine in the presence of Me₃NO·2H₂O afforded diiron pentacarbonyl complexes with monophosphine ligands (μ-SCH₂CH₂S-μ)Fe₂(CO)₅[P(4-C₆H₄Cl)₃] (1), (μ-SCH₂CH₂S-μ)Fe₂(CO)₅[Ph₂P(2-C₅H₄N)] (2), [μ-SCH(CH₃)CH(CH₃)S-μ]Fe₂(CO)₅[P(4-C₆H₄Cl)₃] (3), and [μ-SCH(CH₃)CH(CH₃)S-μ]Fe₂(CO)₅[Ph₂P(2-C₅H₄N)] (4) in good yields. Complexes 1–4 were characterized by elemental analysis, ¹H NMR, ³¹P{¹H} NMR and ¹³C{¹H} NMR spectroscopy. Furthermore, the molecular structures of 1–4 were confirmed by X-ray crystallography.     

Synthesis and characterization of 2-hydroxy-pyridine modified Group 4 alkoxides

The reaction of Group 4 metal alkoxides ([M(OR)₄]) with the potentially bidentate ligand, 2-hydroxy-pyridine (2-HO-(NC₅H₄) or H-PyO), led to the isolation of a family of compounds. The products isolated from the reaction of [M(OR)₄] [where M = Ti, Zr, or Hf; OR = OPrⁱ (OCH(CH₃)₂), OBu^t (OC(CH₃)₃), or ONep (OCH₂C(CH₃)₃] under a variety of stoichiometries with H-PyO were identified by single crystal X-ray diffraction as [(OPrⁱ)₂(PyO-κ²(O,N))Ti(μ-OPrⁱ)]₂ (1), [(ONep)₂Ti(μ(O)-PyO-κ²(O,N))₂(μ-ONep)Ti(ONep)₃] (2), [(ONep)₂Ti(μ(O)-PyO-κ²(O,N))(η¹(N),μ(O)-PyO)(μ-O)Ti(ONep)₂]₂ (2a), [H][(PyO-κ²(O,N))(η¹(O)-PyO)Ti(ONep)₃] (3), [(OR)₂Zr(μ(O)-PyO-κ²(O,N))₂(μ-OR)Zr(OR)₃] (OR = OBu^t (4), ONep (5)), [(OR)₂Zr(μ(O,N)-PyO-κ²(O,N))₂(μ(O,N)-PyO)Zr(OR)₃] (OR = OBu^t (6), ONep (7)), [[(OBu^t)₂Zr(μ(O)-PyO-(κ²(N,O))(μ(O,N)-PyO)₂Zr(OBu^t)](μ₃-O)]₂ (6a), [[(ONep)(PyO-κ²(N,O))Zr(μ(O,N)-PyO-κ²(N,O))₂(μ(O)-PyO-κ²(N,O))Zr(ONep)](μ₃-O)]₂ (7a), [(OBu^t)(PyO-κ²(O,N))Zr(μ(O)-PyO-κ²(O,N))₂((μ(O,N)-PyO)Zr(OBu^t)₃] (8), [(OBu^t)₂Hf(μ(O)-PyO-κ²(N,O))₂(μ-OBu^t)Hf(OBu^t)₃] (9), [(OR)₂ M(μ(O)-PyO-κ²(N,O))₂(μ(O,N)-PyO)M(OR)₃] (OR = OBu^t (10), ONep (11)), and [(ONep)₃Hf(μ-ONep)(η¹(N),μ(O)-PyO)]₂Hf(ONep)₂ (12)·tol. The structural diversity of the binding modes of the PyO led to a number of novel structure types in comparison to other pyridine alkoxy derivatives. The majority of compounds adopt a dinuclear arrangement (1, 2, 4–11) but oxo-based tetra- (2a and 7a), tri- (12), and monomers (3) were observed as well. Compounds 1–12 were further characterized using a variety of analytical techniques including Fourier Transform Infrared Spectroscopy, elemental analysis, and multinuclear NMR spectroscopy.     

Reaction of 2-methyl-3-morpholino-1-phenylprop-2-en-1-one with Ru3(CO)12

The reaction of Ru₃(CO)₁₂ with 2-methyl-3-morpholino-1-phenylprop-2-en-1-one (1) produced the Ru₆(CO)₁₆(μ₄-η¹:η¹:η²:η²-PhC(O)-C(Me)=C)₂ (2), Ru₂O₂(CO)₄(η³-OC(Ph)C(Me)C(H)C(Me)₂C(Ph))₂ (3), and [Ru(CO)₂(PhCO₂)(O(CH₂-CH₂)₂NH]₂ (4) complexes, which were characterized by IR and NMR spectroscopy. The structures of the complexes were established by X-ray diffraction. The formation of the complexes is accompanied by deamination of ligand 1. Complexes 2 and 3 bearing the vinyl ketone groups contain five-membered oxaruthenacycles and dihydropyran rings. Morpholine is not removed from the reaction mixture and leads to the formation of complex 4. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2063–2068, December, 2006.     

Benzoate-functionalized diiron propanedithiolate complexes with mono- and di-phosphine ligands as catalysts for reduction of protons

Reaction of the diiron propanedithiolate complex [μ-(SCH₂)₂CHO₂CC₆H₅]Fe₂(CO)₆ (A) with triphenylphosphine (PPh₃) or cis-1,2-bis(diphenylphosphine)ethylene (cis-dppv) in the presence of one equivalent of Me₃NO·2H₂O yielded a mono-substituted complex [μ-(SCH₂)₂CHO₂CC₆H₅]Fe₂(CO)₅(PPh₃) (1) or an asymmetrically substituted complex [(μ-SCH₂)₂CHO₂CC₆H₅]Fe₂(CO)₄(κ²-dppv) (2), respectively. The structures of both complexes were characterized by spectroscopic methods and X-ray crystallography. In the solid state, the PPh₃ ligand in 1 occupies an apical position of the square pyramidal geometries of the Fe2, while the cis-dppv in 2 coordinates Fe2 in an apical-basal manner. The electrochemistry of both complexes was investigated. The electron-withdrawing benzoate functionality on the bridgehead carbon of the propanedithiolate bridge shifts the oxidation and reduction potentials of 1 or 2 slightly. Both complexes can catalyze the reduction of protons from CF₃COOH but with a higher efficiency for 2.     

Mapping the Transformation [{RuII(CO)3Cl2}2]→[RuI2(CO)4]2+: Implications in Binuclear Water–Gas Shift Chemistry

The complete sequence of reactions in the base‐promoted reduction of [{Ru^II(CO)₃Cl₂}₂] to [Ru^I₂(CO)₄]²⁺ has been unraveled. Several μ‐OH, μ:κ²‐CO₂H‐bridged diruthenium(II) complexes have been synthesized; they are the direct results of the nucleophilic activation of metal‐coordinated carbonyls by hydroxides. The isolated compounds are [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)₂(μ‐OH)(NP^F‐Am)₂][PF₆] ( 1 ; NP^F‐Am=2‐amino‐5,7‐trifluoromethyl‐1,8‐naphthyridine) and [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)(μ‐OH)(NP‐Me₂)₂][BF₄]₂ ( 2 ), secured by the applications of naphthyridine derivatives. In the absence of any capping ligand, a tetranuclear complex [Ru₄(CO)₈(H₂O)₂(μ³‐OH)₂(μ:κ²‐C,O‐CO₂H)₄][CF₃SO₃]₂ ( 3 ) is isolated. The bridging hydroxido ligand in 1 is readily replaced by a π‐donor chlorido ligand, which results in [Ru₂(CO)₄(μ:κ²‐C,O‐CO₂H)₂(μ‐Cl)(NP‐PhOMe)₂][BF₄] ( 4 ). The production of [Ru₂(CO)₄]²⁺ has been attributed to the thermally induced decarboxylation of a bis(hydroxycarbonyl)–diruthenium(II) complex to a dihydrido–diruthenium(II) species, followed by dinuclear reductive elimination of molecular hydrogen with the concomitant formation of the Ru^I? Ru^I single bond. This work was originally instituted to find a reliable synthetic protocol for the [Ru₂(CO)₄(CH₃CN)₆]²⁺ precursor. It is herein prescribed that at least four equivalents of base, complete removal of chlorido ligands by Tl^I salts, and heating at reflux in acetonitrile for a period of four hours are the conditions for the optimal conversion. Premature quenching of the reaction resulted in the isolation of a trinuclear Ru^I₂Ru^II complex [{Ru(NP‐Am)₂(CO)}{Ru₂(NP‐Am)₂(CO)₂(μ‐CO)₂}(μ₃:κ³‐C,O,O′‐CO₂)][BF₄]₂ ( 6 ). These unprecedented diruthenium compounds are the dinuclear congeners of the water–gas shift (WGS) intermediates. The possibility of a dinuclear pathway eliminates the inherent contradiction of pH demands in the WGS catalytic cycle in an alkaline medium. A cooperative binuclear elimination could be a viable route for hydrogen production in WGS chemistry.     

Synthesis and Characterizations of Ferrocenyl Carbonyl Chromium and Cobalt Clusters

Two novel bimetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅)–C≡C–C₆H₄–Fc] (Fc = C₅H₅FeC₅H₄] (1) and [Cr(CO)₃(η ⁶-C₆H₅)–C ≡ C–Fc–C(CH₃)₂–Fc] (3), were synthesized by the Sonogashira coupling reaction. By using of (1) and (3) as ligands to react with Co₂(CO)₈, two others novel polymetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}–C₆H₄–Fc] (2) and [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}Fc–C(CH₃)₂–Fc] (4) were obtained. Four carbonyl complexes were characterized by elemental analysis, FT-IR, NMR and MS. The molecular structures of complexes (1), (2) and (4) were determined by single crystal X-ray diffraction. The interactions among the ferrocenyl, Cr(CO)₃ and Co₂(CO)₆-η ²-μ ²-C≡C– units were investigated by cyclic voltammetry.     

Physico-chemical properties of the first metal compound of di-2-pyridylketone p-nitrophenoxyacetic acid hydrazone (dpknxh), fac-Re(CO)3(κ2-Npy,Npy-dpknxh)Cl

Abstract

Di-2-pyridyl ketone p-nitrophenoxyacetic acid hydrazone (1), obtained from acid-catalyzed condensation of di-2-pyridyl ketone (dpk) with p-nitrophenoxyacetic acid hydrazide, reacts with Re(CO)₅Cl in refluxing toluene to form fac-Re(CO)₃(κ²-N_py,N_py-dpknxh)Cl (2). 1 and 2 were identified from the results of their elemental analyses, spectroscopic and electrochemical properties. X-ray structural analysis on single crystals of 1 and 2 grown from CH₃CN solutions and fac-Re(CO)₃(κ²-N_py,N_py-dpknxh)Cl·DMSO (3) grown from a DMSO solution of 2 confirmed their identities. Spectrophotometric titrations of protophilic solutions of 2 with protophilic solutions of NaBX₄ (X?=?H or F) divulged inter-conversion between the high- and low-energy ILCT transitions of 2 and its solvated complex. Substrates in low concentrations can be detected and determined using protophilic solutions of 2. Electrochemical measurements on 1 and 2 disclosed irreversible redox transformations leading to decomposition of 1 and 2 following the first electron transfer.     

Synthesis and X-Ray Crystal Structures of Fe2Ru(CO)12−n (CNBu t ) n and FeRu2(CO)12−n (CNBu t ) n (n=1, 2)

The clusters Fe₂Ru(CO)_12–n (CNBu ^t ) _n (3, n=1; 4, n=2), FeRu₂(CO)_12–n (CNBu ^t ) _n (5, n=1, 6, n=2) and FeRu₂(CO)₁₁(CNCy) (5a) have been prepared by direct substitution from the parent carbonyl precursors Fe₂Ru(CO)₁₂ (1) and FeRu₂(CO)₁₂ (2). All compounds have been characterized spectroscopically and clusters 3, 4, 5, and 6 by single crystal X-ray determinations. In all cases, the isonitrile ligands adopt axial or pseudo-axial positions on a ruthenium atom. The structures of 3–5 are very similar to their parent clusters, but the extent of metal framework disorder is significantly less. Cluster 6 adopts the same C _2v Fe₃(CO)₁₂ type structure as 4, and thus differs markedly from the parent compound 2, which has a D ₃ structure .     

Five dinuclear iron carbonyl complexes based on substituted tetramethylcyclopentadienyl ligands: synthesis and crystal structures

Thermal treatment of the substituted tetramethylcyclopentadienes [C₅Me₄HR] [R?=?n-propyl (1), i-propyl (2), cyclopentyl (3), cyclohexyl (4), and 4-NMe₂Ph (5)] with Fe(CO)₅ gave five new substituted tetramethylcyclopentadienyl dinuclear iron carbonyl complexes, [η⁵-C₅Me₄CH₂CH₂CH₃]₂Fe₂(CO)₄ (6), [η⁵-C₅Me₄CH(CH₃)₂]₂Fe₂(CO)₄ (7), [η⁵-C₅Me₄CH(CH₂)₄]₂Fe₂(CO)₄ (8), [η⁵-C₅Me₄CH(CH₂)₅]₂Fe₂(CO)₄ (9), and [(η⁵-C₅Me₄)(4-NMe₂Ph)]₂Fe₂(CO)₄ (10). The new complexes were characterized by elemental analysis, IR, and ¹H NMR spectra. The molecular structures of 6, 8, 9, and 10 were determined by X-ray single crystal diffraction.