壳层可控导电聚吡咯/聚苯乙烯复合微球及聚吡咯中空微胶囊的制备

在导电聚合物含量较小时,含核壳结构的导电聚合物复合粒子就可以具有和本体相当的导电率,且加工性好,近年来这种核壳结构微粒的制备已引起了科学家们的广泛关注．Armes等[制备了导电聚吡咯、导电聚苯胺包覆聚苯乙烯的核壳结构胶体粒子及聚苯胺和二氧化硅的纳米复合物．刘正平等用改进的方法在粒径为116nm的单分散聚苯乙烯乳胶粒子上包覆聚吡咯,     

Cagelike polymer microspheres with hollow core/porous shell structures

Submicron‐scaled cagelike polymer microspheres with hollow core/porous shell were synthesized by self‐assembling of sulfonated polystyrene (PS) latex particles at monomer droplets interface. The swelling of the PS latex particles by the oil phase provided a driving force to develop the hollow core. The latex particles also served as porogen that would disengage automatically during polymerization. Influential factors that control the morphology of the microspheres, including the reserving time of emulsions, polymerization rate, and the Hildebrand solubility parameter and polarity of the oil phase, were studied. A variety of monomers were polymerized into microspheres with hollow core/porous shell structure and microspheres with different diameters and pore sizes were obtained. The polymer microspheres were characterized by scanning electron microscopy, transmission electron microscopy, optical microscopy, and Fourier transform infrared spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 933–941, 2007     

Hollow titania spheres with movable silica spheres inside

We demonstrate a flexible method for preparing hollow TiO2 nanospheres with movable silica nanoparticles inside (HTNMSNs). In this method, we used monodisperse silica--polystyrene core--shell nanospheres (SiO2-PS-CSNs) sulfonated as templates and prepared the composite shell consisting of TiO2 and sulfonated polystyrene (SPS) through adsorbing or depositing tetrabutyl titanate gel into the SPS shell. Finally the HTNMSNs were obtained after removal of all polymers in the composite nanospheres by dissolution or calcinations. We investigated the dependence of the morphologies of HTNMSNs on the thickness of PS shells and the size of SiO2 cores and prepared rare earth doped HTNMSNs by a sol-gel process.     

Uniform chitosan hollow microspheres prepared with the sulfonated polystyrene particles templates

Biodegradable chitosan hollow microspheres have been fabricated by employing uniform sulfonated polystyrene (PS) particles as templates. The chitosan was adsorbed onto the surface of the sulfonated polystyrene templates through the electrostatic interaction between the sulfonic acid groups on the templates and the amino groups on the chitosan. Subsequently, the adsorbed chitosan was crosslinked by adding glutaraldehyde. After the removal of the sulfonated polystyrene core, chitosan hollow microspheres were obtained. The longer the sulfonation time used, the smaller the size of the hollow particles and the thicker the chitosan wall obtained. Fourier transform infrared spectrometry was used to characterize the component of the microspheres. The morphologies of the PS templates and the chitosan microspheres were observed by transmission electron microscopy and scanning electron microscopy. The controlled release behavior of the chitosan hollow microspheres was also primarily investigated.     

The preparation of composite microsphere with hollow core/porous shell structure by self-assembling of latex particles at emulsion droplet interface

A submicrometer-scaled polystyrene/melamine-formaldehyde hollow microsphere composite was prepared by self-assembling of sulfonated polystyrene (SPS) latex particles at the interface of emulsion droplets and then being fixed in place using a hard melamine-formaldehyde (MF) composite layer. For control-released purposes, the influential factors that control the size and uniformity of the packed-droplets and the permeability of the composite shell, including the initial particle location, the hydrophilicity and the size of colloidal templates, the oil phase solvent and reserving time of emulsions after the addition of MF prepolymer, were further studied. Relatively uniform sized particle packed-droplets with an average diameter of 10 microm were obtained. The assembled SPS particles kept ordering and minimal conglutination after the preparation of composite microspheres, which allows of controlling the permeability from the interstices between the particles. Porous-mesh-structured MF composite layer was formed to further control the permeability. The morphology of emulsions and composite microspheres were characterized by optical microscopy, scanning and transmission electron microscopy.     

Fabrication of hollow and mesoporous germania microspheres by templating against plasma-treated polystyrene microspheres

The surfaces of monodisperse polystyrene (PS) colloids have been modified with hydroxyl groups by means of plasma treatment technique. By templating against these surface-modified PS colloids, the germania coating PS composite microspheres were prepared via a sol–gel process. After removal of PS cores, the resulting composite microspheres converted into hollow germania microspheres with mesoporous structure. The shell thickness of these hollow spheres can be controlled by varying the concentration of germania precursor. BET results indicated that the hollow germania microspheres shell exhibits slightly broader pore size distribution than that of corresponding composite one owing to the swelling effects of the PS core during the etching process. In addition, the as-prepared germania exhibits amorphous phase which can be converted into crystalline phase by calcination treatment. It is worthy to noting that this fabrication protocol demonstrated a facile, low-cost and environment-benign way for fabricating hollow germania structures by templating method. Moreover, this protocol is not limit to germania; it also could be used to create the other hollow inorganic oxides spheres.     

Preparation of uniform silica/polypyrrole core/shell microspheres and polypyrrole hollow microspheres by the template of modified silica particles using different modified agents

Silica/polypyrrole (PPY) core/shell microspheres and PPY hollow microspheres were prepared by the template of silica particles whose surface character was modified with different modified agents. The morphology and structure of the particles were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Elemental analysis and X-ray photoelectron spectroscopy (XPS) were carried out to characterize the structure of PPY hollow microspheres. We investigated the effect of different modified agents on the surface character of silica particles and the effect of surface character of silica particles on the morphology of PPY hollow microspheres. The effect of reaction conditions on the size of core/shell particles and hollow particles was also studied.     

Preparation of SiO2@polystyrene@polypyrrole sandwich composites and hollow polypyrrole capsules with movable SiO2 spheres inside

In this paper, we describe a flexible method for preparing conducting building blocks: SiO2@polystyrene@polypyrrole sandwich multilayer composites and hollow polypyrrole (PPy) capsules with movable SiO2 spheres inside. First, SiO2@polystyrene (PS) core/shell composites were synthesized, and then SiO2@PS@PPy sandwich multilayer composites were prepared by chemical polymerization of pyrrole monomer on the surface of SiO2@PS composites. Furthermore, hollow polypyrrole capsules with movable SiO2 spheres inside were obtained after removal of the middle PS layer. The diameter of sandwich multilayer composites could easily be controlled by adjusting the dosage of pyrrole monomer. The conductivities of composites increased with the increase of PPy content. After the insulating PS layer was selectively etched, the conductivities of hollow capsules with movable SiO2 spheres inside were much higher than those of the corresponding sandwich multilayer composites.     

Thermoresponsive submicron-sized core–shell hydrogel particles with encapsulated olive oil

Thermoresponsive submicron-sized core–shell hydrogel particles with incorporated olive oil were synthesised and studied. The microspheres having poly(N-isopropylacrylamide-co-methyl methacrylate) core and poly(N-isopropylacrylamide) shell were synthesised by emulsifier-free seed polymerisation method. The morphology, particle size and distribution characteristics of the core microspheres were studied with different amount of initiator, monomer–solvent ratio and polymerisation time using scanning electron microscopy and dynamic light scattering particle size analysis. The prepared core and core–shell microspheres were regularly spherical with average size of around 190.0 and 320.0 nm respectively and nearly monodispersed size distribution. Transmission electron microscopy study revealed the core–shell structure of the microspheres. The thermoresponsive transition temperature (T _t) of the core–shell microspheres was determined as 33 °C by optical absorbance measurement, dynamic light scattering particle size analysis and differential scanning calorimetry. The release rate of olive oil from core–shell microspheres was accelerated by squeezing out the entrapped olive oil as the temperature was increased above T _t. Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy study indicated the formation of copolymer.     

空心玻璃微珠/TiO2复合微球的制备及其性能研究

本文以脲为沉淀剂,通过化学沉淀法成功实现了锐钛矿型二氧化钛壳层在空心玻璃微珠表面的可控组装,从而制备出玻璃/二氧化钛核壳空心微球,并通过XRD、SEM、EDX和拉曼光谱对其结构、形貌、粒径、壳厚和化学组成进行了表征.提出了二氧化钛在空心玻璃微珠表面的定向生长的可能机制和形成过程.     

Study on Fe3O4/polyaniline electromagnetic composite hollow spheres prepared against sulfonated polystyrene colloid template

Fe₃O₄/polyaniline (PANI) composite hollow spheres were prepared by using sulfonated polystyrene (SPS) microspheres as templates. The sulfonic acid groups were applied to induce absorbing Fe₃O₄ nanoparticle, and subsequently, conductive PANI was grown. Finally, the polystyrene cores were selectively dissolved to yield composite hollow microspheres with electromagnetic properties. The analysis results indicated that the adsorption of Fe₃O₄ on template core by electrostatic interaction resulted in magnetic composite microspheres. The conductivity of composite hollow spheres was remarkably increased after polyvinylpyrrolidone modification which favored the growth of PANI on SPS/Fe₃O₄ and enhanced the integrity of hollow microspheres. The saturated magnetization of the composite hollow microspheres was tuned from 2.7 to 9.1 emu/g, and the conductivity was in the range from 10^?2 to 10⁰?S/cm.     

Preparation of Porous Hollow SiO2 Spheres by a Modified St?ber Process Using MF Microspheres as Templates

Using the surface charged and acid dissolvable melamine formaldehyde (MF) microspheres as sacrificial hard templates, silica coated MF core?Cshell composite microspheres, denoted as MF@SiO₂, were synthesized via a surfactant-assisted sol?Cgel process by using tetraethyl orthosilicate (TEOS) as silica source. Hollow SiO₂ spheres with mesoporous shells were then obtained after selective removal of the MF cores and the pore directing surfactant by hydrochloric acid etching or calcinations in air. Interesting shrinkage phenomena were observed in both the hollow products derived from hydrochloric acid etching and calcinations. The influence of the ratio of MF sphere to TEOS and the removal method of the MF core on the size of the hollow spheres, the shell thickness and the shell surface roughness have been studied. The composition, the thermal stability, the morphology, the surface area and pore size distribution, the wall thickness and adsorption properties of the hollow spheres derived from hydrochloric acid etching and calcinations were also investigated and compared based on the FTIR, SEM, TEM, TGA, Nitrogen adsorption?Cdesorption and spectrophotometer techniques or measurements.     

In situ synthesis of polystyrene/nano-CdSe core/shell microspheres in aqueous solution at room temperature

Polystyrene/nano-CdSe (PS/CdSe) core/shell microspheres were synthesized via in situ soap-free emulsion polymerization using various functional monomers such as 2-(dimethylamino)ethyl methacrylate, 1-vinylimidazole, 2-vinylpridine, and 4-vinylpridine. They were co-polymerized with styrene monomer and provided the location for coordinating with Cd²⁺ ions on the PS particle surfaces. Then, we used an alkaline selenium solution as a selenium source. Reaction of the alkaline selenium solution with the previous emulsion produced nanocrystalline CdSe onto the surface of PS particles at room temperature under atmospheric pressure. The different kinds of functional monomers and the amount of both Cd²⁺ ion and functional monomer were playing important roles to obtain stable and uniform morphologies of CdSe particles. Morphological observations were carried out by both scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Through the SEM and TEM microphotographs, we could confirm the formation of PS/nano-CdSe composite particles. Ultraviolet–visible absorption measurement indicated the quantum dot effect in the resulted PS/nano-CdSe core/shell microspheres.     

Submicron Sized Hollow Polymer Particles: Preparation and Properties

The considered method for obtaining hollow polymer particles is based on the following pathway: (1) preparation of a carboxylated core latex by emulsion copolymerization of acrylic monomers with methacrylic acid, (2) synthesis of a core-shell latex comprising a styrene (co)polymer shell, (3) neutralization of the core carboxylic groups with a base followed by the core ionization and hydration to a high degree, shell expansion and formation of water-filled hollows. A number of approaches to improve the hydrophilic core – hydrophobic shell compatibility and enlarge the hollow volume are considered. The synthesized hollow particles are of a submicron size with the relative hollow volume V_hol : V_part.= 0.43 – 0.64. Methods for cationic hollow particle latex preparation by anionic latex recharging with a cationic surfactant or acidic melamine resin are discussed. Recharging with a melamine resin is shown to afford hollow particles with an external polymer shell providing a high thermal stability of the particles.     

Preparation of thermoresponsive core–shell polymeric microspheres and hollow PNIPAM microgels

A reliable and efficient route for preparing thermoresponsive hollow microgels based on cross-linked poly(N-isopropyl acrylamide) (PNIPAM) was developed. Firstly, monodisperse thermoresponsive core–shell microspheres composed of a P(styrene (St)-co-NIPAM) core and a cross-linked PNIPAM shell were prepared by seeded emulsion polymerization using P(St-co-NIPAM) particles as seeds. The size of the P(St-co-NIPAM) core can be conveniently tuned by different dosages of sodium dodecyl sulfate. The thickness of the cross-linked PNIPAM shell can be controlled by varying the dosage of NIPAM in the preparation of PNIAPM shell. Then, hollow PNIPAM microgels were obtained by simply dissolving the P(St-co-NIPAM) core with tetrahydrofuran. The core–shell microspheres and the hollow microgels were characterized by transmission electron microscopy, dynamic light scattering, atomic force microscopy, and Fourier-transform infrared spectroscopy.     

Facile preparation of Au nanoparticle-embedded polydopamine hollow microcapsule and its catalytic activity for the reduction of methylene blue

Abstract

Development of novel supported catalysts with high activity and stability is still a challenge. In this study, the Au-polydopamine (Au-PDA) hollow microcapsules with Au nanoparticles embedded into the PDA microcapsule shell have been synthesized through a simple template-induced covalent assembly method, where polystyrene (PS) nanospheres were used as templates to form core/shell structured PS/Au-PDA composites, followed by core removal through tetrahydrofuran etching. Their morphology and composition were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transform infrared spectra (FT-IR), UV-Vis spectrophotometer and X-ray diffraction (XRD), respectively. Results showed that the Au-PDA microcapsules possessed well-fined hollow structure and uniform sizes with inner diameter of about 385?nm, shell thickness of about 30?nm, and Au nanoparticles with diameter of about 17?nm incorporated. The catalytic performance of Au-PDA hollow microcapsules was evaluated through the reduction of methylene blue (MB) dye with NaBH₄ as a reducing agent. Compared to PDA/Au composites with Au nanoparticles loaded on the surface of PDA microspheres, as-prepared Au-PDA hollow microcapsules show good stability and recyclability in the catalytic experiments as the Au nanoparticles were firmly wrapped in PDA matrix, which makes the Au-PDA hollow microcapsules a practicable catalyst candidate for advanced catalytic systems.     

Preparation of hollow silica microspheres with controlled shell thickness in supercritical fluids

This article presents a novel route to prepare hollow silica microspheres with well-defined wall thickness by using cross-linked polystyrene (PS) microspheres as templates with the assistance of supercritical carbon dioxide (SC-CO₂). In this approach, the cross-linked PS templates can be firstly prepared via emulsifier-free polymerization method by using ethylene glycol dimethacrylate or divinylbenzene as cross-linkers. Then, the silica shell from the sol–gel process of tetraethyl orthosilicate (TEOS) which was penetrated into the PS template with the assistance of SC-CO₂ was obtained. Finally, the hollow silica spheres were generated after calcinations at 600 °C for 4 h. The shell thickness of the hollow silica spheres could be finely tuned not only by adjusting the TEOS/PS ratio, which is the most frequently used method, but also by changing the pressure and aging time of the SC-CO₂ treatment. Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscope were used to characterize these hollow silica spheres.     

非晶态Ni-P空心球材料的制备及磁性质研究

采用表面活化-化学镀方法制备了非晶态Ni-P/聚苯乙烯微球核壳材料,通过除去聚苯乙烯微球内核,进而得到了非晶态Ni-P空心球材料。与晶态Ni空心球比较,非晶态Ni-P空心球显示了更好的软磁性质。     

Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.     

Multi‐metal shell coated with surface modification of polystyrene bead cores to improve its adhesion metal shell

We investigated the delamination problem at the metal‐polymer interface and the mechanical buckling of the metal layer at a localized area of the metallic shell under compression between two parallel plates. First, polystyrene (PS) beads were synthesized by dispersion polymerization and then their sulfonation process. After sequential electroless deposition, the average size of multi‐metal coated sulfonated polystyrene (SPS) bead was ca 4.95 µm. Using the electromechanical indentation, the electrical resistance of a single metal‐coated SPS bead decreased with increasing compressive strain without delamination at the metal‐polymer interface, and its electrical resistance showed 5.65 Ω. Copyright © 2009 John Wiley & Sons, Ltd.