The Self-Association and Mixed Micellization of an Anionic Surfactant,Sodium Dodecyl Sulfate,and a Cationic Surfactant,Cetyltrimethylammonium Bromide: Conductometric,Dye Solubilization,and Surface Tension Studies

In the present study, we investigate the self-association and mixed micellization of an anionic surfactant, sodium dodecyl sulfate (SDS), and a cationic surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of SDS, CTAB, and mixed (SDS + CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), and A_min (the minimum area per surfactant molecule at the air/water interface)) of SDS, CTAB, and (SDS + CTAB) micellar/mixed micellar systems were evaluated. The thermodynamic parameters of the micellar (SDS and CTAB), and mixed micellar (SDS + CTAB) systems were evaluated.

A schematic representation of micelles and mixed micelles.     

Effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant and a cationic conventional (monomeric) surfactant

Herein we report the effect of (chloride salt) electrolytes on the mixed micellization of (equimolar) a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide) (16-6-16), and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB) in aqueous solutions. In absence and presence of (chloride salt) MCl (where M?Li, Na, and K) electrolytes, the critical micelle concentration (CMC) of mixed (16-6-16 + CTAB) surfactants was measured by surface tension measurements. With increasing the concentration of electrolyte, the CMCs were increasing. The surface properties and the thermodynamic parameters of the mixed micellar systems were also evaluated. From these evaluated thermodynamic parameters, it was found that in presence of electrolyte the stability of the mixed micellar system is more.     

Interaction between biosurfactant surfactin and cationic surfactant cetyl trimethyl ammonium bromide in mixed micelle

An anionic/cationic mixed surfactant aqueous system of surfactin and cetyl trimethyl ammonium bromide (CTAB) at different molar ratios was studied by surface tension and fluorescence methods (pH 8.0). Various parameters that included critical micelle concentration (cmc), micellar composition (X ₁), and interaction parameter (β ^m) as well as thermodynamic properties of mixed micelles were determined. The β ^m was found to be negative and the mixed system was found to have much lower cmc than pure surfactant systems. There exits synergism between anionic surfactin and cationic CTAB surfactants. The degree of participation of surfactin in the formation of mixed micelle changes with mixing ratio of the two surfactants. The results of aggregation number, fluorescence anisotropy, and viscosity indicate that more packed and larger aggregates were formed from mixed surfactants than unmixed, and the mixed system may be able to form vesicle spontaneously at high molar fraction of surfactin.     

Interactional and aggregation behavior of twin tail cationic surfactants with pluronic L64 in aqueous solution

The aqueous mixed systems of twin tail cationic surfactants didodecyldimethylammonium bromide, ditetradecyldimethylammonium bromide, and dihexadecyldimethylammonium bromide with pluronic L64 have been studied to determine the bulk aggregation and interactional behavior. Various experimental techniques, namely small-angle neutron scattering (SANS), fluorescence, conductivity, and surface tension, have been employed to investigate the mixed micellization. The SANS data analysis has been employed to determine the shapes of different aggregates formed. Pure twin tail cationic surfactants form vesicles whereas the micelles of pure pluronic L64 are spherical. The mixed systems (surfactant + L64) also form spherical micelles, and the spherical shape of mixed micelles is predominantly controlled by pluronic L64. Various interfacial parameters such as surface excess (Γ _max), minimum area per molecule (A _min), and thermodynamic parameters such as the standard Gibbs free energy of micellization (DG_mic⁰ \Delta G_{{mic}}^{{0}} ), Gibbs free energy of adsorption (DG_ads⁰ \Delta G_{{ads}}^{{0}} ), and effective Gibbs free energy (DG_eff⁰ \Delta G_{{eff}}^{{0}} ) have been determined from the surface tension measurements. The results were interpreted on the basis of pseudophase separation model and regular solution theory. The interactions of each surfactant with pluronic L64 are found to be nonideal and antagonistic. The repulsive nature of the interaction is explained on the basis of the changes in the microenvironment of micelles of pluronic L64. Micelles of pluronic L64 are less hydrophobic and contains significant amount of water, and inclusion of hydrophobic alkyl chains of twin tail cationic surfactants disturbs this microenvironment of pluronic L64 micelle.     

Thermodynamic and spectroscopic studies on cationic surfactant tetradecyltrimethylammonium bromide in aqueous solution of trisubstituted ionic liquid 1, 2-dimethyl-3-octylimidazolium chloride at different temperatures

In this work, the effects on micellar behavior of long chain cationic surfactant tetradecyltrimethylammonium bromide (TTAB) upon the addition of trisubstituted ionic liquid (IL), 1, 2-dimethyl-3-octylimidazolium chloride [odmim][Cl] at temperatures, 298.15–318.15 K has been studied. Different techniques such as conductance, surface tension, fluorescence and ¹H NMR have been employed to understand the interactional mechanisms. The values of critical micelle concentration (cmc) and various thermodynamic parameters have been calculated from conductivity measurements. The surface parameters like effectiveness of decrease in surface tension (Π_cmc), minimum surface area occupied per surfactant monomer (A_min), maximum surface excess concentration (Γ_max), and adsorption efficiency (pC₂₀) have been evaluated by surface tension measurements. Micellar aggregation number (N_agg) has been determined by quenching of pyrene. Further to understand interactions in post micellar region, ¹H NMR measurements have been performed. It has been observed that the lipophilicity of interacting ion modified the thermodynamic and aggregation properties of TTAB.     

Mixed micellization and surface properties of non-ionic/cationic surfactants

We investigate the surface properties of aqueous binary mixtures of our cationic surfactant O-dodecyl-N,N′-diisopropylisourea hydrochloride (ISO-DIC C₁₂) with commercially available nonionic surfactant polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether (TritonX-100) at different temperatures (288 to 303?K). The micellization behavior of the binary systems is studied by determining the surface tension and other important physicochemical parameters, such as the critical micelle concentration (CMC), surface tension at the CMC(γ_cmc), Krafft Temperature (T_K), maximum excess concentration (Γ_max), minimum surface area per molecule (A_min), surface pressure at the CMC (П_cmc), and the adsorption efficiency (pC20) at the air/water interface. The study has additionally covered the calculation of thermodynamic parameters of micellization, including the standard Gibbs free energy, the standard enthalpy, the standard entropy, the free energy, and the Gibbs free energy of adsorption at air/water interface. The CMC values of the binary systems determined by experimental data are used to evaluate the micellar composition in the mixed micelle, the interaction parameter β and the activity coefficients f₁(ISO-DIC C₁₂) and f₂ (polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether) using the theoretical treatment proposed by Clint and Rubingh. Our results reveal that the proposed binary systems possess enhanced surface activity compared to those of the individual surfactants.     

Electrochemical reduction of p-nitrosodiphenylamine in, a cationic micellar system

The electroreduction of p-nitrosodiphenylamine (p-NDPA) in an alkaline aqueous solution containing cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was investigated by polarography, cyclic and rotating disc voltammetry. It was found that the reduction of p-NDPA in cationic micellar systems takes place by the ECE mechanism, and, compared to the reduction of the same compound in a homogeneous water solution, has a somewhat lower rate of the overall electrode reaction. The lower reaction rate of p-NDPA reduction in micellar medium is probably due to three main factors: solubilization of p-NDPA in CTAB micelles, adsorption of monomeric surfactant species at the electrode surface and a lower rate of the base catalyzed dehydration reaction (C-step) in the micellar system.     

Aqueous behaviour of cationic surfactants containing a cleavable group

The aggregation behaviour of two novel cationic RAFT agents (transfer surfactants); N,N-dimethyl-N-(4-(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium bromide (PCDBAB) and N-(4-((((dodecylthio)-carbonothioyl)thio)methyl)benzyl)-N,N-dimethylethanammonium bromide (DCTBAB) in diluted solutions have been investigated by surface tension, conductimetry and microcalorimetry measurements. The thermodynamic parameters i.e. the critical micelle concentration (cmc), the degree of micelle ionization (alpha), the head group surface area (a 0), Delta H mic, Delta G mic and T Delta S mic are reported at 303 K. The thermodynamic parameters have been compared to those of the conventional surfactant cetyltrimethylammonium bromide (CTAB) in order to specify structural relationships. The obtained results have been discussed considering the hydrophobic behaviour of the S-C=S- linkage and the specific interactions that arise from the introduction of the benzene ring into the hydrophobic part.     

Studies of mixed micelle formation between cationic gemini and cationic conventional surfactants

Mixed micellization of dimeric cationic surfactants tetramethylene-1,4-bis(hexadecyldimethylammonium bromide)(16-4-16), hexamethylene-1,6-bis(hexadecyldimethylammonium bromide) (16-6-16) with monomeric cationic surfactants hexadecyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), cetylpyridinium chloride (CPC), and tetradecyltrimethylammonium bromide (TTAB) have been studied by conductivity and steady-state fluorescence quenching techniques. The behavior of mixed systems, their compositions, and activities of the components have been analyzed in the light of Rubingh's regular solution theory. The results indicate synergism in the binary mixtures. Ideal and experimental critical micelle concentrations (i.e., cmc(*) and cmc) show nonideality, which is confirmed by beta values and activity coefficients. The micelle aggregation numbers (N(agg)), evaluated using steady-state fluorescence quenching at a total concentration of 2 mM for CTAB/16-4-16 or 16-6-16 and 5 mM for TTAB/16-4-16 or 16-6-16 systems, indicate that the contribution of conventional surfactants was always more than that of the geminis. The micropolarity, dielectric constant and binding constants (K(sv)) of mixed systems have also been evaluated from the ratios of respective peak intensities (I(1)/I(3) or I(0)/I(1)).     

Interfacial Synthesis,Vol. Ill,Recent Advances,Charles E. Carraher,Jr. and Jack Preston,editors, Marcel Dekker,Inc., New York and Basel, 1982, $65.00

Hydrolyses of p‐nitrophenyl picolinate (PNPP) and p‐nitrophenyl acetate (PNPA) mediated by the micellar catalytic systems of two types of cationic surfactants [cetyltrimethylammonium bromide (CTAB), Gemini dimethylene‐1,2‐bis(cetyltrimethylammonium bromide) (16‐2‐16, 2Br^?)] were investigated spectrophotometrically in the pH range of 7.0–9.0 and 25°C. Also, the effects of several kinds of additives, such as ethanol, cyclodextrins (CDs), on the hydrolytic reactions of PNPP and PNPA were studied systematically. It is noteworthy that: (1) double chain Gemini surfactant micellar system enhanced the hydrolyses of carboxylic acid esters notably compared with single chain surfactant (CTAB) micellar solutions under the same reaction conditions; (2) the apparent rate constants (k _obsd) of PNPP and PNPA hydrolyses increased with the increasing in pH values of reaction media; (3) as additives, ethanol has effect on both PNPP and PNPA hydrolyses, and moreover, the k _obsd for hydrolyses decreased with the increasing contents of ethanol (≤5%) at 25°C and pH 9.00; (4) the presence of CDs [α‐cyclodextrin (α‐CD), β‐cyclodextrin (β‐CD), γ‐cyclodextrin (γ‐CD)], as additives, showed different effects on PNPP and PNPA hydrolyses in different reaction systems.     

Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

Influence of Amine‐Based Cationic Gemini Surfactants on Catalytic Activity of α‐Chymotrypsin

The α‐chymotrypsin activity was tested in aqueous media with the presence of novel cationic amine–based gemini surfactant, with different spacer chain lengths and head group size, and also compared with the cationic cetyltrimethylammonium bromide (CTAB) and cetyltriphenylphosphonium bromide (CTPB) surfactants and aqueous buffer only. The p‐nitrophenyl acetate (PNPA) hydrolysis rate was monitored in the presence of the surfactant concentration at 30°C. Most of these gemini surfactants gave higher catalytic activity as compared to cationic CTAB and CTPB. The highest superactivity was measured in the presence of gemini 16‐12‐16, [dodecanediyl‐1,12‐bis(cetyldimethylammonium bromide)] surfactant at pH 7.5. The catalytic reaction follows the Michaelis–Menten mechanism. The catalytic rate constants, k_cat, show the same profile that the catalytic affinity; K_M being enhanced with increasing space chain length. The results are favorable for considering that the amine‐based gemini surfactant influences more than both the aqueous and cationic micellar media.     

Anionic–Nonionic Mixed Surfactant Systems: Micellar Interaction and Thermodynamic Behavior

The interactions between an anionic surfactant, viz., sodium dodecylbenzenesulfonate and nonionic surfactants with different secondary ethoxylated chain length, viz., Tergitol 15-S-12, Tergitol 15-S-9, and Tergitol 15-S-7 have been studied in the present article. An attempt has also been made to investigate the effect of ethoxylated chain length on the micellar and the thermodynamic properties of the mixed surfactant systems. The micellar properties like critical micelle concentration (CMC), micellar composition (X_A), interaction parameter (β), and the activity coefficients (f_A and f_NI) have been evaluated using Rubingh's regular solution theory. In addition to micellar studies, thermodynamic parameters like the surface pressure (Π_CMC), surface excess values (Γ_CMC), average area of the monomers at the air–water interface (A_avg), free energy of micellization (ΔG_m), minimum energy at the air–water interface (G_min), etc., have also been calculated. It has been found that in mixtures of anionic and nonionic secondary ethoxylated surfactants, a surfactant containing a smaller ethoxylated chain is favored thermodynamically. Additionally, the adsorption of nonionic species on air/water interface and micelle increases with decreasing secondary ethoxylated chain length. Dynamic light scattering and viscometric studies have also been performed to study the interactions between anionic and nonionic surfactants used.     

Synthesis and properties of quaternary ammonium Gemini surfactants with hydroxyl groups

The article describes synthesis of four hydroxyethyl alkylene–double alkyl bromide through substitution of nucleophilic d iethanolamine, 1-bromododecane, and 1,4-dibromobutane. The structure of the new hydroxyl cationic surfactant (HDCS) was characterized by ¹H NMR and FTIR spectra. The aqueous solution of HDCS showed critical micelle concentration, i.e., 5.6 × 10^?2 mM, and could reduce oil/water interfacial tension to 3.28 × 10^?3 mN m^?1. The surface tension measurements provided a series of parameters, including critical micelle concentration (CMC), surface tension at the CMC (γ_CMC), adsorption efficiency (pC₂₀), and effectiveness of surface tension reduction (Π_CMC). In addition, maximum surface excess concentration (Г_max) and minimum surface area/molecule (A_min) at the air/water interface were obtained by the Gibbs adsorption isotherm. The influence of inorganic salts (sodium chloride, calcium chloride) and organic salts (sodium benzoate) on the surface tension of HDCS in aqueous solution was investigated. For wettability alteration measurement, contact angle measurement as a quantitative method was utilized. Meanwhile, foam ability, foam stability, and emulsifying property of the synthesized surfactant were also examined at different concentration. HDCS also had excellent viscosity property.     

Interaction and Stability of Mixed Micelle and Monolayer of Nonionic and Cationic Surfactant Mixtures

Interaction and stability of binary mixtures of cationic surfactants hexadecyltrimethylammonium bromide (HTAB) or hexadecylpyridinium bromide (HPyBr) with nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) have been studied at different mole fraction of cationic surfactants by using interfacial tension measurements and fluorescence probe techniques. From interfacial tension measurements, the critical micellar concentration and various interfacial thermodynamic parameters have been evaluated. The experimental cmc's were analyzed with the pseudophase separation model, the regular solution theory, and the Maeda's approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTAB + Mega-10 were obtained. It has been observed that the aggregation number of mixed micelles deviates negatively from the ideal behavior. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio and found to be increase with the increase of ionic content. The polarization of fluorescence probe Rhodamine B was monitored at different mole fraction of cationic surfactants.     

Spectrophotometric study of anionic azo-dye light yellow (X6G) interaction with surfactants and its micellar solubilization in cationic surfactant micelles

Solubilization and interaction of azo-dye light yellow (X6G) at/with cationic surfactants cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) was investigated spectrophotometricaly. The effect of cationic micelles on solubilization of anionic azo dye in aqueous micellar solutions of cationic surfactants was studied at pH 7 and 25 degrees C. The binding of dye to micelles implied a bathochromic shift in dye absorption spectra that indicates dye-surfactant interaction. The results showed that the solubility of dye increased with increasing surfactant concentration, as a consequence of the association between the dye and the micelles. The binding constants, K(b), were obtained from experimental absorption spectra. By using pseudo-phase model, the partition coefficients between the bulk water and surfactant micelles, K(x), were calculated. Gibbs energies of binding and distribution of dye between the bulk water and surfactant micelles were estimated. The results show favorable solubilization of dye in CTAB micelles.     

Surface-active properties of new cationic gemini surfactants with cyclic spacer

Three cationic gemini surface active compounds of the type (1r,4r)-1,4-dialkyl-1,4-dimethy-l-piperazine-1,4-diium bromide (Ia, Ib, and Ic), were synthesized. They were characterized using elemental analysis and ¹H-NMR spectra. Their surface-active properties were measured in aqueous solutions with different concentrations at different temperatures (25, 40, and 55°C). Various surface measurements of these gemini surfactants, (compared to the conventional one, 1-Dodecyl-1-methylpiperidinium bromide (a)) were estimated, specifically critical micelle concentration (CMC), effectiveness (π_CMC), efficiency (P_C20) as well as maximum surface excess (Γ_max) and minimum surface area (A_min). The measurements of the gemini compounds gave low CMC, high efficiency in reducing the surface tension, and intense adsorption at air/water interface. These surfactants have lower Krafft points and thus better solubility. Thermodynamic data, free energy, entropy, and enthalpy changes (ΔG°, ΔS°, and ΔH°) for micellization at the air/water interface and also for adsorption in the bulk of surface-active solutions were calculated.     

The influence of mixed cationic–anionic surfactants on the three-phase contact parameters in silica–solution systems

The formation of thin wetting films on silica surface from aqueous solution of (a) tetradecyltrimetilammonium bromide (C₁₄TAB) and (b) surfactant mixture of the cationic C₁₄TAB with the anionic sodium alkyl- (straight chain C₁₂–, C₁₄– and C₁₆–) sulfonates, was studied using the microscopic thin wetting film method developed by Platikanov. Film lifetimes, three-phase contact (TPC) expansion rates, receding contact angles and surface tension were measured. It was found that the mixed surfactants caused lower contact angles, lower rates of the thin aqueous film rupture and longer film lifetimes, as compared to the pure C₁₄TAB. This behavior was explained by the strong initial adsorption of interfacial complexes from the mixed surfactant system at the air/solution interface, followed by adsorption at the silica interface. The formation of the interfacial complexes at the air/solution interface was proved by means of the surface tension data. It was also shown, that the chain length compatibility between the anionic and cationic surfactants controls the strength of the interfacial complex and causes synergistic lowering in the surface tension. The film rupture mechanism was explained by the heterocoagulation mechanism between the positively charged air/solution interface and the solution/silica interface, which remained negatively charged.