Combination self-assembly of β-sheet peptides and carbon nanotubes: functionalizing carbon nanotubes with bioactive β-sheet block copolypeptides

Understanding the self-assembly behavior of β-sheet peptides is important, not only in constructing bioactive peptide nanostructures, but also in inhibiting uncontrollable protein aggregation in protein-misfolding diseases. Here, the first systematic investigation of combination self-assembly between β-sheet block copolypeptides and CNTs is presented, demonstrating the presence of several different association modes during the combination self-assembly process. Bioactive β-sheet block copolypeptides can self-assemble by themselves, or can be used to functionalize CNT hybrids depending on the situation. This behavior may be important both for fabricating bioactive peptide/CNT hybrids and for controlling/inhibiting protein-misfolding diseases.     

Electrochemical determination of acetaminophen at a carbon electrode modified in the presence of β-cyclodextrin: role of the activated glassy carbon and the electropolymerised β-cyclodextrin

Acetaminophen is a well-known drug commonly used to provide pain relief, but it can also lead to acute liver failure at high concentrations. Therefore, there is considerable interest in monitoring its concentrations. Sensitive and selective acetaminophen electrochemical sensors were designed by cycling a glassy carbon electrode (GCE) to high potentials in the presence of β-CD in a phosphate electrolyte, or by simply activating the GCE electrode in the phosphate solution. Using cyclic voltammetry, adsorption-like voltammograms were recorded. The acetaminophen oxidation product, N-acetyl benzoquinone imine, was protected from hydrolysis, and this was attributed to the adsorption of acetaminophen at the modified GCE. The rate constants for the oxidation of acetaminophen were estimated as 4.3 × 10^–3 cm² s^–1 and 3.4 × 10^–3 cm² s^–1 for the β-CD-modified and -activated electrodes, respectively. Using differential pulse voltammetry, the limit of detection was calculated as 9.7 × 10^–8 M with a linear concentration range extending from 0.1 to 80 μM. Furthermore, good selectivity was achieved in the presence of caffeine, ascorbic acid and aspirin, enabling the determination of acetaminophen in a commercial tablet. Similar electrochemical data were obtained for both the β-CD-modified and activated GCE surfaces, suggesting that the enhanced detection of acetaminophen is connected mainly to the activation and oxidation of the GCE. Using SEM, EDX and FTIR, no evidence was obtained to indicate that the β-CD was electropolymerised at the GCE.

     

Combined effect of β-nucleating agent and multi-walled carbon nanotubes on polymorphic composition and morphology of isotactic polypropylene

The effects of nucleating duality, imposed by a mixed nucleating agent (NA) system containing multi-walled carbon nanotubes (MWCNTs) and a rare earth (WBG), on the crystallization behaviors of isotactic polypropylene (iPP) including the peak temperature of crystallization (T _cp), polymorphic composition, and crystalline morphology, were probed in detail by calorimetry, X-ray diffraction, and polarized light microscopy. In such mixed nucleating agent system, MWCNTs is active filler to induce α-nucleation for iPP, while WBG serves as β-nucleating agent. When the WBG content was low (0.05%), the crystals of WBG were as a form of individual isotropic dendrite, and the enhancement of T _cp was achieved by the incorporation of MWCNTs. As the WBG content was high as 0.1%, a percolated NA network consisted of needlelike crystals of WBG yielded before nucleating the prevalent crystallization of iPP. In this case, the addition of MWCNTs has no obvious effect on T _cp. However, by varying the mass proportion of MWCNTs/WBG, the polymorphic composition was adjusted significantly, indicating a nucleation competition between MWCNTs and WBG. Although the competitive growth existed between α-crystals nucleated by MWCNTs and β-crystals nucleated by WBG, the formation of primary β-crystallite was always prior to the α-nucleated crystallization, as confirmed by crystalline morphology. These findings are useful for developing a new pathway to prepare iPP-based composite with good mechanical property via the addition of mixed nucleating system containing active inorganic filler and β-nucleating agent.     

Electrocatalytic interaction of nano-engineered palladium on carbon nanofibers with hydrogen peroxide and β-NADH

The growing demands for reagentless hydrogen peroxide (H₂O₂) and β-nicotinamide adenine dinucleotide (β-NADH) sensors from food, pharmaceutical, chemical, and biochemical fields have stimulated extensive research interest on nano-engineered Pd. In this paper, Pd/carbon composite nanofibers were prepared by electrodepositing Pd onto electrospun carbon nanofibers to act as a catalyst toward the electrocatalytic redox reactions of H₂O₂ and β-NADH. The morphology of nano-engineered Pd was controlled by selectively adjusting the electrodeposition time and potential. Scanning electron microscopy and transmission electron microscopy results showed that nanocactus- and nanoflower-like Pd depositions were obtained on the surface of carbon nanofibers. Electrocatalytic analysis demonstrated a high electrocatalytic activity of the composite nanofibers for the redox of H₂O₂ and oxidation of β-NADH.     

Reaction of β-trifluoroethoxy vinamidinium salts with carbon nucleophiles

β-Trifluoroethoxy vinamidinium salts 1 reacted smoothly with various types of the carbanions, generated by treatment of ketones, esters, amide and nitriles with LDA, to give the corresponding trifluoroethoxylated multifunctional dienamine derivatives 3 in moderate to good yields. On the other hand, the reaction of 1 with lithium acetylide and other carbanions derived from methyl compounds bearing sulfonyl, sulfinyl, and phosphonyl groups produced the corresponding α,β-unsaturated aldehydes 5 in good yields.     

Adsorption separation of carbon dioxide,methane, and nitrogen on Hβ and Na-exchanged β-zeolite

Adsorption isotherms of carbon dioxide （CO2）, methane （CH4）, and nitrogen （N2） on Hβand sodium exchanged β-zeolite （Naβ） were volumetrically measured at 273 and 303 K. The results show that all isotherms were of Brunauer type I and well correlated with Langmuir-Freundlich model. After sodium ions exchange, the adsorption amounts of three adsorbates increased, while the increase magnitude of CO2 adsorption capacity was much higher than that of CH4 and N2. The selectivities of CO2 over CH4 and CO2 over N2 enhanced after sodium exchange. Also, the initial heat of adsorption data implied a stronger interaction of CO2 molecules with Na＋ ions in Naβ . These results can be attributed to the larger electrostatic interaction of CO2 with extraframework cations in zeolites. However, Naβ showed a decrease in the selectivity of CH4 over N2, which can be ascribed to the moderate affinity of N2 with Naβ. The variation of isosteric heats of adsorption as a function of loading indicates that the adsorption of CO2 in Naβ presents an energetically heterogeneous profile. On the contrary, the adsorption of CH4 was found to be essentially homogeneous, which suggests the dispersion interaction between CH4 and lattice oxygen atoms, and such interaction does not depend on the exchangeable cations of zeolite.     

Adsorption separation of carbon dioxide, methane, and nitrogen on Hβ and Na-exchanged β-zeolite

Adsorption isotherms of carbon dioxide (CO2), methane (CH4), and nitrogen (N2) on Hβ and sodium exchanged β-zeolite (Naβ) were volumetrically measured at 273 and 303 K. The results show that all isotherms were of Brunauer type Ⅰ and well correlated with Langmuir-Freundlich model. After sodium ions exchange, the adsorption amounts of three adsorbates increased, while the increase magnitude of CO2 adsorption capacity was much higher than that of CH4 and N2. The selectivities of CO2 over CH4 and CO2 over N2 enhanced after sodium exchange. Also, the initial heat of adsorption data implied a stronger interaction of CO2 molecules with Na+ ions in Naβ. These results can be attributed to the larger electrostatic interaction of CO2 with extraframework cations in zeolites. However, Naβ showed a decrease in the selectivity of CH4 over N2, which can be ascribed to the moderate affinity of N2 with Naβ. The variation of isosteric heats of adsorption as a function of loading indicates that the adsorption of CO2 in Naβ presents an energetically heterogeneous profile. On the contrary, the adsorption of CH4 was found to be essentially homogeneous, which suggests the dispersion interaction between CH4 and lattice oxygen atoms, and such interaction does not depend on the exchangeable cations of zeolite.     

Adsorption separation of carbon dioxide, methane and nitrogen on monoethanol amine modified β-zeolite

A new type of composite adsorbents was synthesized by incorporating monoethanol amine (MEA) into β-zeolite. The parent and MEA-functionalized β-zeolites were characterized by X-ray diffraction (XRD), N2 adsorption, and thermogravimetric analysis (TGA). The adsorp-tion behavior of carbon dioxide (CO2), methane (CH4), and nitrogen (N2) on these adsorbents was investigated at 303 K. The results show that the structure of zeolite was well preserved after MEA modification. In comparison with CH4 and N2, CO2 was preferentially adsorbed on the adsorbents investigated. The introduction of MEA significantly improved the selectivity of both CO2/CH4 and CO2/N2, the optimal selectivity of CO2/CH4 can reach 7.70 on 40 wt% of MEA-functionalized β-zeolite (MEA(40)-β) at 1 atm. It is worth noticing that a very high selectivity of CO2/N2 of 25.67 was obtained on MEA(40)-β. Steric effect and chemical adsorbate-adsorbent interaction were responsible for such high adsorption selectivity of CO2. The present MEA-functionalized β-zeolite adsorbents may be a good candidate for applications in flue gas separation, as well as natural gas and landfill gas purifications.     

Synthesis and biological investigation of the β-thiolactone and β-lactam analogs of tetrahydrolipstatin

The synthesis of β-thiolactone and β-lactam analogs of tetrahydrolipstatin is described from a common late-stage β-lactone derivative. These analogs, and a cis-disubstituted β-lactone analog of tetrahydrolipstatin, were screened for activity against porcine pancreatic lipase and for inhibition of cell growth of a panel of four human cancer lines.     

Influence of carbon and nitrogen sources and temperature on hyperproduction of a thermotolerant β-glucosidase from synthetic medium by Kluyveromyces marxianus

The effect of carbon source and its concentration, inoculum size, yeast extract concentration, nitrogen source, pH of the fermentation medium, and fermentation temperature on β-glucosidase production by Kluyveromyces marxianus in shake-flask culture was investigated. These were the independent variables that directly regulated the specific growth and β-glucosidase production rate. The highest product yield, specific product yield, and productivity of β-glucosidase occurred in the medium (pH 5.5) inoculated with 10% (v/v) inoculum of the culture. Cellobiose (20 g/L) significantly improved β-glucosidase production measured as product yield (Y _P/S ) and volumetric productivity (Q _P ) followed by sucrose, lactose, and xylose. The highest levels of productivity (144 IU/[L·h]) of β-glucosidase occurred on cellobiose in the presence of CSL at 35°C and are significantly higher than the values reported by other researchers on almost all other organisms. The thermodynamics and kinetics of β-glucosidase production and its deactivation are also reported. The enzyme was substantially stable at 60°C and may find application in some industrial processes.     

Stereochemistry in alkylations of dianions of β-hydroxysulfoxides and β-hydroxysulfones

Alkylations of dianions of β-hydroxysulfoxides and β-hydroxysulfones have been found to be affected by chelation of a Li cation with a sulfinyl group and by coordination of the cation with tetrahydrofuran rather than a sulfonyl group, respectively.     

Electrochemical detection of DNA methylation using a glassy carbon electrode modified with a composite made from carbon nanotubes and β-cyclodextrin

We describe a method for detecting DNA methylation. It is based on direct oxidation of DNA bases at a glassy carbon electrode (GCE) modified with film of a multiwalled carbon nanotube-β-cyclodextrin composite. This nano-structured film causes a strong enhancement on the oxidation current of DNA bases due to its large effective surface area and extraordinary electronic properties. Well-defined peaks were obtained as a result of electro-oxidation of guanine (at 0.67 V), adenine (at 0.92 V), thymine (at 1.11 V), cytosine (at 1.26 V), and 5-methylcytosine (at 1.13 V; all data vs. saturated calomel electrode (SCE)). The potential difference between 5-methylcytosine and cytosine (130 mV) is large enough to enable reliable simultaneous determination and analysis. The interference by thymine can be eliminated by following the principle of complementary pairing between purine and pyrimidine bases in DNA. The modified electrode was successfully applied to the evaluation of 5-methylcytosine in a fish sperm DNA, the methylation level of cytosine was found to be 7.47 %, and the analysis process took less than 1 h.     

Electrochemical chiral recognition of tryptophan using a glassy carbon electrode modified with β-cyclodextrin and graphene

We report on a method for electrochemical enantioselective recognition of tryptophan (Trp) enantiomers. It is based on competitive host-guest interaction between a deoxy-(2-aminoethylamino)-β-cyclodextrin (CD) bound to graphene nanosheets and the Cu(II) complexes of the Trp enantiomers via a ligand exchange mechanism. Chiral recognition was investigated via cyclic voltammetry and electrochemical impedance spectroscopy. The results reveal that the CD bound to graphene displays a stronger interaction with the Cu(II) complex of L-Trp than to that of D-Trp. The method was applied to the determination of the ratio of Trp enantiomers in mixtures.

Electrochemical determination of L-phenylalanine at polyaniline modified carbon electrode based on β-cyclodextrin incorporated carbon nanotube composite material and imprinted sol-gel film

A sensitive and selective electrochemical sensor based on a polyaniline modified carbon electrode for the determination of l-phenylalanine has been proposed by utilizing β-cyclodextrin (β-CD) incorporated multi-walled carbon nanotube (MWNT) and imprinted sol-gel film. The electrochemical behavior of the sensor towards l-phenylalanine was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometric i-t curve. The surface morphologies of layer-by-layer assembly electrodes were displayed by scanning electron microscope (SEM). The response mechanism of the imprinted sensor for l-phenylalanine was based on the inclusion interaction of β-CD and molecular recognition capacity of the imprinted film for l-phenylalanine. A linear calibration plot was obtained covering the concentration range from 5.0 × 10⁻⁷ to 1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 1.0 × 10⁻⁹ mol L⁻¹. With excellent sensitivity, selectivity, stability, reproducibility and recovery, the electrochemical imprinted sensor was used to detect l-phenylalanine in blood plasma samples successfully.     

Preparation of β-fluoro- and β,β-difluoro-histidinols

Nucleophilic attack of azide on 2-bromo-3-fluoro-3-(1-trityl-1H-imidazol-4-yl)-propan-1-ol (1a) in aprotic solvent occurs on the 2-position to give the 2-azido derivative (2a). Reduction of azide and removal of the trityl group produces β-fluorohistidinol (6a). Elimination of HBr from 1a followed by “FBr” addition to the resulting double bond gives 2-bromo-3,3-difluoro-3-(1-trityl-1H-imidazol-4-yl)-propan-1-ol (1b). Nucleophilic attack of azide followed by reduction and removal of the trityl group, as for the preparation of 6a, gives β,β-difluorohistidinol (6b). Initial attempts, under a variety of conditions, to oxidize the fluorinated histidinol precursors to carboxylic acids have not been successful.     

Synthesis and spectral studies of β-diketone and β-ketoester derivatives of aluminium zirconium isopropoxide

The reactions of aluminium zirconium heptaisopropoxide [AlZr(OPrⁱ)₇] with some β-diketones and β-ketoesters, resulting in the formation of derivatives of type ZrAl(OPrⁱ)_(7−x)L_x (where L = acetylacetone, benzoylacetone, methylacetoacetate or ethylacetoacetate; x = 1 or 2) have been carried out. These newly synthesized compounds have been characterized by elemental analyses, and IR and NMR (²⁷Al, ¹H and ¹³C) spectral studies.     

Preparation and evaluation of inclusion complexes of diacerein with β-cyclodextrin and hydroxypropyl β-cyclodextrin

The objective of this research was to improve the aqueous solubility, dissolution rate and, consequently, bioavailability of diacerein, along with avoiding its side effect of diarrhea, by complexation with β-cyclodextrin (β-CD) and HP-β-cyclodextrin (HP-β-CD). Phase solubility curve was classified as an A_N type for both the CDs, which indicated formation of complex of diacerein with β-CD and HP-β-CD in 1:1 stoichiometry and demonstrating that both CDs are proportionally less effective at higher concentrations. The complexes were prepared by kneading method and were evaluated to study the effect of complexation on aqueous solubility and rate of dissolution in phosphate buffer (pH 6.8). Based on the dissolution profile HP-β-CD was selected for preparing fast disintegrating tablet of diacerein which was compared with marketed formulation (MF-J). The HP-β-CD complex was probed for Fourier transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction studies which evidenced stable complex formation and increase in amorphousness of diacerein in complex. In brief, the characterization studies confirmed the inclusion of diacerein within the non-polar cavity of HP-β-CD. HP-β-CD complex showed improved in vitro drug release profile compared to pure drug and similar to that of marketed formulation respectively.