Synthesis and Biological Activities of Novel Anthranilic Diamides Analogues Containing Benzo[b]thiophene

A series of novel anthranilic diamides analogues containing benzo[b]thiophenyl ring was designed and synthesized. Their structures were characterized by melting points, ¹H nuclear magnetic resonance(¹H NMR) and high-resolution mass spectrometry(HRMS). The bioassay tests indicate that their insecticidal activities were weak to moderate. Antibacterial tests indicate that some of the compounds showed favourable activity in vitro against Physalospora piricola, Alternaria solani, Cercospora arachidicola, Gibberella sanbinetti and Phytophthora infestans at a dosage of 50 mg/L.     

Reaction of 3-Cyano-2-diazo-4,5,6,7-tetrahydrobenzo[ b ]thiophene with 3-Imino-butyronitrile: Synthesis of Pyridazines,Thiophenes and Their Fused Derivatives

The reaction of the 3-cyano-2-diazo-4,5,6,7-tetrahydrobenzo[ b ]thiophene 1 with 3-imino-butyronitrile 2 gave the azo derivative ( 3 ). The reactivity of the latter product toward different reagents was studied to give fused derivatives with potential biological activities.     

1,3-二甲氧甲酰-4,6-二氰基噻吩并[3,4-c]噻吩的合成和密度泛函理论研究

设计采用新颖的Pummerer-氰化路线和用亚硫酰氯作S-转移试剂的路线合成了第一例全部连吸电子基的噻吩并[3,4-c]噻吩. 用¹H NMR, ¹³C NMR, FTIR, 元素分析和X射线衍射分析进行了表征. 用B3LYP/6-31G^*及B3LYP/6- 311＋＋G^**方法全优化计算了1,3-二甲氧甲酰-4,6-二氰基吩并[3,4-c]噻吩分子, 得到几何构型、总能量、标准熵、标准焓和标准自由能, 计算构型与X射线衍射测定结果非常吻合. 并用电荷分布讨论了有关非经典噻吩并[3,4-c]噻吩体系的稳定性, 计算结果能很好地解释有关实验现象.     

Understanding the Regioselectivity and the Molecular Mechanism of [3 + 2] Cycloaddition Reactions between Nitrous Oxide and Conjugated Nitroalkenes: A DFT Computational Study

Regiochemical aspects and the molecular mechanism of the [3 + 2] cycloaddition between nitrous oxide and conjugated nitroalkenes were evaluated on the basis of the wb97xd/6-311 + G(d) (PCM) computational study. It was found that, independently of the nature of the nitroalkene, all considered processes are realized via polar, single-step mechanisms. All attempts at the localization of hypothetical zwitterionic intermediates were unsuccessful. Additionally, the DFT computational study suggested that, in the course of the reaction, the formation of respective Δ²-4-nitro-4-R₁-5-R₂-1-oxa-2,3-diazolines was preferred from the kinetic point of view.     

3,6‐Dialkylthieno[3,2‐b]thiophene moiety as a soluble and electron donating unit preserving the coplanarity of photovoltaic low band gap copolymers

It has been shown recently, that the presence of alkyl side chains at the 3‐positions on the thiophene rings placed next to 2,1,3‐benzothiadiazole core in the backbone of several conjugated polymers results in severe steric hindrance and prevents efficient planarity of the thiophene‐2,1,3‐benzothiadiazole‐thiophene (TBzT) segment. Both properties have a strong influence on the optoelectronic properties of the polymer and need to be considered when the polymer is to be used for organic electronics applications. In this work, we modified a previously synthesized oligothiophene copolymer, consisting of two 3,4′‐dialkyl‐2,2′‐bithiophene units attached to a 2,1,3‐benzothiadiazole unit (TBzT segment) and a thieno[3,2‐b]thiophene unit, by optimizing the lateral alkyl side chains following a density functional theory investigation. It is demonstrated that eliminating the alkyl side chains from the 3‐positions of the TBzT segment and anchoring them onto the thieno[3,2‐b]thiophene, using an efficient synthesis of the 3,6‐dihexylthieno[3,2‐b]thiophene unit, allows us to reduce the energy band gap. In addition, the chemical modification leads to a better charge transport and to an enhanced photovoltaic efficiency of polymer/fullerene blends. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Achieving branched polyethylene waxes by aryliminocycloocta[b]pyridylnickel precatalysts: Synthesis,characterization, and ethylene polymerization

Cycloocta[b ]pyridin‐10‐one was prepared to form the corresponding imino derivatives, which then reacted with (DME)NiBr₂ to form 10‐aryliminocycloocta[b ]pyridylnickel bromides ( Ni1 – Ni5 ). The new compounds were characterized by means of FT‐IR spectroscopy as well as elemental analysis and the organic ligands were also analyzed by the NMR measurements. Furthermore, the molecular structure of a representative complex Ni3 was determined by the single crystal X‐ray diffraction, indicating the distorted tetrahedral geometry around the nickel atom. Upon the activation with either methylaluminoxane (MAO) or diethylaluminium chloride (Et₂AlCl), the title nickel complexes exhibited high activity in ethylene polymerization and produced polyethylene of low molecular weight (1.43–6.78 kg mol^?1) and low dispersity (1.7–2.4), which suggests a single‐site catalytic system. More importantly, the microstructure of the resultant polyethylene (especially degree of branching) and certain physical properties, such as T _m values, can easily be modulated by selecting the proper substituents within the ligands and adjusting the polymerization conditions. This finding demonstrates that it is plausible to use a single catalyst for synthesizing different types of polyethylene on demand.10‐Aryliminocycloocta[b ]pyridylnickel bromides ( Ni1–Ni5 ), upon activation with either MAO or Et₂AlCl, exhibited high activity towards ethylene polymerization and produced polyethylenes with low molecular weight (1.43–6.78 kg mol^?1) and low dispersity (1.7–2.4). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2601–2610     

Mononuclear copper(II) complex with terpyridine and an extended phenanthroline base, [Cu(tpy)(dppz)]: Synthesis, crystal structure, DNA binding and cytotoxicity activity

The new dipyrido[3,2-a:2′,3′-c]phenazine (dppz) copper(II) complex, [Cu(tpy)(dppz)]²⁺, where tpy is 2,2′:6′,2″-terpyridine, has been prepared and fully characterized by spectroscopic methods and single-crystal X-ray diffraction. Its DNA binding and in vitro cytotoxicity have been also studied. The molecular structure shows a distorted trigonal bipyramidal CuN₅ coordination geometry around the copper atom. The bidentate dppz ligand binds in the equatorial plane, while tpy exhibits axial-equatorial bonding. The interaction of the complex with DNA has been investigated by electronic absorption, competitive fluorescence titration, linear dichroism, voltammetric techniques and a gel electrophoresis mobility shift assay. It is proposed that the binding mode of the complex to DNA is of an intercalation nature with the planar dppz ligands located between the base pairs of double-stranded DNA.An in vitro cytotoxicity study of the complex on human breast adenocarcinoma (MCF7) cell line by an MTT assay indicates that the title complex may have the potency to act as an effective anticancer drug, with an IC₅₀ value of 4.57 μM (3.62-5.77).     

Electronic structure and optical properties of poly[3‐(4‐octylphenoxy)thiophene]: Experimental and theoretical studies

This article reports the synthesis and characterization of a new polythiophene derivative phenoxy‐substituted, the poly[3‐(4‐octylphenoxy)thiophene] (POPOT). The oxidative polymerization was found to yield low molecular weight material, whereas a modified Grignard metathesis (GRIM) yielded polymers of high molecular weights. One‐ and two‐dimensional NMR indicated the latter to be highly regioregular. POPOTs exhibited higher thermal stabilities than equivalent alkoxy‐substituted polythiophenes and exhibited red shifts in the absorption spectra with respect to equivalent. The absorption spectra showed a red shifted λ_max at 540 nm in tetrahydrofuran solutions and 580 nm in spin‐coated films, with respect to poly(3‐alkylthiophene)s. A further red shift of 40 nm in going from solution (540 nm) to solid states (580 nm) is correlated with results from density functional theory electronic structure calculations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7505–7516, 2008     

Crystal structure and DFT calculations of Cp2NbH(SiIMe2)(SiFMe2): an asymmetric bis(silyl) niobocene hydride complex

An asymmetric bis(silyl) niobocene hydride complex, namely, bis(η⁵-cyclopentadienyl)(fluorodimethylsilyl)hydrido(iododimethylsilyl)niobium, [Nb(C₅H₅)₂(C₂H₆FSi)(C₂H₆ISi)H] or Cp₂NbH(SiIMe₂)(SiFMe₂), has been studied to determine the effect of the silyl ligand on the position of the hydride attached to the Nb atom. It has been shown that when a Group 17 atom is substituted onto one of the silyl ligands, there is a greater interaction between the hydride and this ligand, as demonstrated by a shorter Si…H distance. In the present work, we have investigated the effect when the silyl ligands are substituted by different Group 17 atoms. We present here the structure and DFT calculations of Cp₂NbH(SiIMe₂)(SiFMe₂), showing that the position of the hydride is located between the two silyl ligands. The results from our investigation show that the hydride is closer to the silyl ligand that is substituted by fluorine.     

A density functional theory study of the stereoselectivity of Cu(OTf)2-catalyzed [3+2] cycloaddition of trifluoromethylated N-acylhydrazones and isoprene: A concerted asynchronous mechanism

Here we employ density functional theory calculations to systematically investigate the underlying mechanism of Cu(OTf)₂-catalyzed [3+2] cycloaddition reactions in the synthesis of CF₃-substituted pyrazolidines. About eight possible initial configurations of the [3+2] reaction is considered, and all relevant reactants, transition states, and products are optimized. Based on these structures, internal reaction coordinate paths, and wavefunction analysis results, we conclude that the Cu(OTf)₂-catalyzed [3+2] cycloaddition follows a concerted asynchronous mechanism. The C N bond forms immediately after the formation of the C C bond. Among the eight reaction paths, the energy barrier for the [3+2] reaction that leads to the CF₃-substituted syn-pyrazolidine is the lowest, ∼5.4 kcal/mol, which might result in the diastereoselectivity that is observed in the experiment. This work not only gives the detailed mechanism of the Cu(OTf)₂-catalyzed [3+2] cycloaddition but can also be helpful for the future designation of Cu(OTf)₂-based cycloaddition processes.     

Oxidative-addition to a four-coordinate tin(II) complex supported by octamethyldibenzotetraaza[14]annulene dianion ligation, [η-Me8taa]Sn: The syntheses and structures of [η-Me8taa]SnI2 and *[η-Me8taa]SnI(THF)**I3*

The four-coordinate tin(II) complex [η⁴-Me₈taa]Sn undergoes oxidative addition of I₂ to give six-coordinate [η⁴-Me₈taa]SnI₂, in which the iodide ligands exhibit a trans arrangment. Abstraction of I⁻ from [η⁴-Me₈taa]SnI₂ is facile, as indicated by the rapid formation of the triiodide derivative *[η⁴-Me₈taa]SnI(THF)**I₃* upon treatment with I₂ in the presence of THF. The molecular structures of [η⁴-Me₈taa]SnI₂ and *[η⁴-Me₈taa]SnI(THF)**I₃* have been determined by X-ray diffraction.     

[4+2]-Cyclodimer of sabinone: formation,crystal structure,and NMR spectra

Oxidation of (+)-sabinol, (1S,3R,5S)-1-isopropyl-4-methylidenebicyclo[3.1.0]hexan-3-ol, by active MnO₂ afforded not the expected sabinone but only its [4+2]-cyclodimer. The molecular structure of the latter was established by X-ray diffraction analysis. The ¹H and ¹³C NMR spectra of this cyclodimer were interpreted using 2D NMR spectroscopy.     

Theoretical studies on redox properties,protonation sites,and electronic spectrum of a new type of polyoxometalate [Ti12Nb6O44]10− by DFT

The electronic structure of a new type of polyoxometalate [Ti₁₂Nb₆O₄₄]^10? has been investigated using density functional theory (DFT). The calculations represent that the LUMO in fully oxidized [Ti₁₂Nb₆O₄₄]^10? delocalizes among the titanium (Ti) and niobium (Nb). Therefore, both Ti and Nb have the probability to accept extra electron when [Ti₁₂Nb₆O₄₄]^10? as catalyst is reduced, which has been reinforced by the spin density for the monoreduced specie [Ti₁₂Nb₆O₄₄]^11?. Three kinds of possible protonated isomers [HTi₁₂Nb₆O₄₄]^9? are discussed. The results reveal that the preferred protonation sites correspond to bridging oxygens Nb? O? Ti. In addition, the calculation of electronic spectrum shows that there is an obvious intramolecular charge transfer from oxygen to metal. The solvent effects were also considered in the calculations by using a conductor‐like screening model (COSMO) of solvation with the solvent‐excluding surface. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Synthesis and crystal structure of a supramolecular adduct of the aqua nitrato complex of gadolinium [Gd(NO<Subscript>3</Subscript>)(H<Subscript>2</Subscript>O)<Subscript>7</Subscript>]<Superscript>2+</Superscript> with macrocyclic cavitand cucurbit[6]uril

A supramolecular adduct of gadolinium aqua nitrato complex and cucurbit[6]uril { [Gd(NO₃)(H₂O)₇](C₅H₅N)@(C₃₆H₃₆N₂₄O₁₂)}(NO₃)₂·10H₂O is obtained by slow diffusion of methanol into an aqueous solution containing gadolinium nitrate, pyridine, and cucurbit[6]uril. According to single crystal X-ray diffraction data, water molecules coordinated to metal atom make hydrogen bonds to polarized carbonyl groups of the macrocycle. The heptaaquanitratogadolinium(III) [Gd(NO₃)(H₂O)₇]²⁺ cation is structurally characterized for the first time. Crystal system is triclinic, space group \(P\overline 1 \), a = 12.3137(4) Å, b = 14.2334(5) Å, c = 19.5629(6) Å; α = 80.850(1)°, β = 86.879(1)°, γ = 68.855(1)°; V = 3157.15(18) ų, Z = 2. Oriented hydrogen-bonded chains of alternating cucurbit[6]uril molecules and gadolinium aqua cations form in the crystal structure.     

A new six-coordinate organotin(IV) complex of OP[NC5H10]3: A comparison with an analogous five-coordinate complex by means of X-ray crystallography,Hirshfeld surface analysis and DFT calculations

A new six-coordinate organotin(IV)-phosphoric triamide complex of OP[NC₅H₁₀]₃ = OP was synthesized ([Cl₂Sn(CH₃)₂(OP)₂], 1) and characterized by X-ray crystallography and spectroscopic methods (FT-IR, UV–Vis, and ¹H/¹³C/³¹P-NMR). The crystal structures of 1 and the analogous previously reported five-coordinate complex [Cl₂Sn(CH₃)₂(OP)] (IZOVIE) were compared on a structural level and by computational means using Hirshfeld surface analysis, density functional theory calculations and the atom in molecule method. The investigation of intermolecular interactions in the crystal structures of the two complexes by the Hirshfeld surface method indicates that in the absence of normal hydrogen bonds, the chlorine-based interactions H?Cl/Cl?H (for 1 and IZOVIE) and Cl?Sn/Sn?Cl (for IZOVIE) play a determinant role in the molecular assemblies. However, the prominent contacts are of H?H type. From calculated electronic parameters such as bond order, Mulliken charge and electron delocalization energy, it was found that the Sn-OP contact has a lower strength in IZOVIE than in 1, suggesting more ionic character of the metal-oxygen contact in five-coordinate complex IZOVIE. Furthermore, we discuss the similarities and differences of the two complexes 1 and IZOVIE derived from the same ligand OP by density functional theory calculations to present an insight into the organotin(IV)-phosphoric triamide coordination chemistry affected by different geometries and coordination numbers.     

Structural aspects of phencyclidines: crystal structure and quantum mechanical calculations for 1-[1-(2-thienyl)cyclohexyl] piperidine and its hydrochloride

Crystal structure determinations for neutral and protonated phencyclidine, 1-[1-(2-thienyl)cyclohexyl] piperidine, show that the piperidine-axial conformer on the cyclohexane ring is present in the neutral compound, and that the piperidine-equatorial conformer in the protonated species. Quantum mechanical calculations in vacuo using ab initio techniques also arrive at the same conclusion. A search of the crystallographic literature via the Cambridge structural database reveals that all protonated phencyclidines assume the piperidine-equatorial conformation, and most neutral phencyclidines assume the piperidine-axial conformation.     

A 2-D CdI2 coordination network with 7-oxabicyclo[2.2.1]-5-heptene-2,3-dicarboxylate: synthesis,crystal structure,and luminescent properties

The in situ reaction of Cd(ClO₄)₂·6H₂O with 7-oxabicyclo[2.2.1]-5-heptene-2,3-dicarboxylic anhydride in the presence of lithium hydroxide affords a 2-D Cd^II coordination polymer, [Cd(L)(H₂O)]_∞ (1) (L?=?7-oxabicyclo[2.2.1]-5-heptene-2,3-dicarboxylate), which exhibits an unusual (3,6)-connected (4⁶.6⁶.8³)(4³)₂ CdI₂-type topology. The luminescent and thermal properties of 1 were investigated.     

[DBU‐H]+ and H2o as effective catalyst form for 2,3‐dihydropyrido[2,3‐d]pyrimidin‐4(1H)‐ones: A DFT Study

DFT investigations are carried out to explore the effective catalyst forms of DBU and H₂O and the mechanism for the formation of 2,3‐dihydropyrido[2,3‐d]‐pyrimidin‐4(1H)‐ones. Three main pathways are disclosed under unassisted, water‐catalyzed, DBU and water cocatalyzed conditions, which involves concerted nucleophilic addition and H‐transfer, concerted intramolecular cyclization and H‐transfer, and Dimroth rearrangement to form the product. The results indicated that the DBU and water cocatalyzed pathway is the most favored one as compared to the rest two pathways. The water donates one H to DBU and accepts H from 2‐amino‐nicotinonitrile ( 1 ), forming [DBU‐H]⁺‐H₂O as effective catalyst form in the proton migration transition state rather than [DBU‐H]⁺‐OH^?. The hydrogen bond between [DBU‐H]⁺···H₂O··· 1 ^? decreases the activation barrier of the rate‐determining step. Our calculated results open a new insight for the green catalyst model of DBU‐H₂O. © 2015 Wiley Periodicals, Inc.     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.