Ionic conductivity and compatibility studies of blends of poly(methyl methacrylate) and poly(propylene glycol) complexed with LICF3SO3

Stable to atmospheric moisture, adhesive and transparent polymer electrolytes have been prepared by blending poly(methyl methacrylate) (PMMA) with poly(propylene glycol)-425/LiCF₃SO₃ complexes. The blending of the polymers has been achieved by a method developed in our laboratory: free radical polymerization of methylmethacrylate in the polyether/salt matrix. A series of polymer blend complexes varying in PMMA content (up to 20% by weight) and oxygen/metal ratios (25, 16, and 8) have been synthesized and their properties studied. All the samples prepared in this study were found to be optically clear unlike the higher molecular weight poly(propylene glycol)-2000 (PPG-2000) system which required a minimum salt concentration to compatibilize a specific amount of PMMA with PPG. The mechanisms by which the salt holds the otherwise incompatible polymers together in a single phase have been investigated by FT-IR. Our studies show a weak coupling of the ether oxygens in the PPG with the ester groups of the PMMA through the lithium cations. Discrete changes has been observed in the FT-IR spectrum of PMMA when doped with the lithium salt hitherto unnoticed with other dopants. Gel permeation chromatography results of the PMMA samples isolated from the solid electrolytes indicate the molecular weight to vary between 43000 and 121000 with relatively narrow distributions, 1.6?2.0. The ionic conductivities of the polymer blend electrolytes were fairly high (10^?5 S/cm) at room temperature. The PMMA neither significantly influenced the T_g of the blend complexes nor effected the ionic conductivities drastically. The ionic conductivity as a function of temperature followed the empirical Vogel-Tammann-Fulcher equation. The blending of PMMA with PPG/LiCF₃SO₃ complexes was found to impart good adhesiveness to the solid electrolytes while making them stable to atmospheric moisture. © 1992 John Wiley & Sons, Inc.     

Structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SA) blend films

The structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SF) blend films were analyzed by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, x-ray diffractometry, and scanning (SEM) and transmission (TEM) electron microscopy. DSC curves of PVA/SF blend films showed a major endothermic peak at 220°C, along with a peak at 280°C. These endotherms were assigned to the thermal decomposition of the ordered PVA elements and to the thermal degradation of silk fibroin, respectively. The PVA/SF blends behaved in a manner intermediate to the pure components, as suggested by both contraction expansion and sample weight retention properties recorded by TMA and TGA measurements. The IR absorption spectra of the blends were identified as purely a composite of the absorption bands characteristic of both PVA and SF pure polymers. The X-ray diffraction patterns of PVA/SF blends showed overlapping spacing due to PVA and SF. A dispersed phase formed by spherical particles of 3–7 μm diameter was observed by SEM and TEM. All these findings suggest that PVA and SF are incompatible. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of new poly(N-1-adamantylmaleimide) and poly(N-1-diamantylmaleimide)

N-l-Diamantylmaleimide was synthesized by reaction of maleic anhydride with 1-aminodiamantane, followed by dehydration with acetic anhydride and sodium acetate. Poly(N-1-adamantylmaleimide) ( IIa ) and poly(N-l-diamantylmaleimide) ( IIb ) were polymerized using 2,2′-azobisisobutyronitrile (AIBN) as an initiator under different experimental conditions such as various initiator concentrations, solvents, polymerization temperatures, and polymerization times. Polymerizations of N-l-adamantylmaleimide in benzene at 60°C or in bulk gave polymers with molecular weights (2000–9500). The experimental results indicated that the propagation may be interrupted by steric hindrance of bulky and rigid substituents such as the adamantyl or diamantyl groups. In addition, the effect of chain transfer to monomer contributes to the relatively low activation energy. The glass transition temperatures of Ia and Ib were 204 and 216°C, respectively. The temperatures at 5% weight loss of the polymers IIa and IIb were above 412°C. © 1996 John Wiley & Sons, Inc.     

羟乙基壳聚糖的合成及其与聚乳酸的相容性

本文以异丙醇为溶剂,碱化壳聚糖与2-氯乙醇反应制备了羟乙基壳聚糖,对产物的结构与性能进行了分析表征;然后以二甲基亚砜为溶剂,采用溶液共混法制备了一系列不同组成的壳聚糖/聚乳酸和羟乙基壳聚糖/聚乳酸复合膜,对两组分间的相容性进行了研究。结果表明,羟乙基化反应在-OH和-NH2上均有发生,壳聚糖单元糖环上的羟乙基取代度为2.46;改性后,壳聚糖结晶性能和起始热分解温度下降,溶解性能得到改善。复合膜的电镜结果显示,在壳聚糖/聚乳酸复合膜中,相分离现象显著存在,壳聚糖在聚乳酸基体中的分散不均匀,有团聚现象,随着壳聚糖含量增加,两组分间的相分离程度增大,团聚现象更为严重,当壳聚糖含量达到50%时,已难以制备完整的复合膜;与之相反,羟乙基壳聚糖/聚乳酸复合膜中两种组分之间的相容性有所改善,相分离现象不明显,并且,当羟乙基壳聚糖含量从10%增加到50%,复合膜中两种组分之间的相容性变化不大。     

Preparation, characterization and application of pyrene-loaded methoxy poly(ethylene glycol)–poly(lactic acid) copolymer nanoparticles

Pyrene-loaded biodegradable polymer nanoparticles were prepared by incorporating pyrene into the polymer nanoparticles formulated from amphiphilic diblock copolymer, methoxy poly(ethylene glycol)–poly(lactic acid) (MePEG–PLA). Their morphological structure and physical properties were characterized by nuclear magnetic resonance (NMR), dynamic light scattering, fluorescence spectroscopy, transmission electronic microscopy and zeta potential measurements. Further, MePEG–PLA nanoparticles containing pyrene as fluorescent marker were administered intranasally to rats, and the distribution of nanoparticles in the nasal mucosa and the olfactory bulb were visualized by fluorescence microscopy. NMR results confirmed that MePEG–PLA copolymer can form nanoparticles in water, and hydrophilic PEG chains were located on the surface of the nanoparticles. The particle size, zeta potential and pyrene loading efficiency of MePEG–PLA nanoparticles were dependent on the PLA block content in the copolymer. Following nasal administration, the absorption of nanoparticles across the epithelium was rapid, with fluorescence observed in the olfactory bulb at 5 min, and a higher level of fluorescence persisted in the olfactory mucosa than that in the respiratory mucosa. These results show that pyrene could serve as a useful fluorescence probe for incorporation into polymer nanoparticles to study tissue distribution and MePEG–PLA nanoparticles might have a great potential as carriers of hydrophobic drugs.     

Preparation,characterization, and dilute solution properties of four-branched cage-shaped poly(ethylene oxide)

A four-branched cage-shaped poly(ethylene oxide) (4C-PEO) was prepared by a coupling reaction at very dilute condition between two kinds of end-functional four-armed star-shaped PEOs having amino and N-hydroxysuccinimide groups on their four ends, followed by purification using α-cyclodextrin (α-CD). The raw coupling reaction product shows multiple peaks including various high molecular weight multimeric products in size-exclusion chromatography measurements, while the product after α-CD purification shows a single peak eluted slightly earlier than the precursor star PEOs. Moreover, the final product obtained has about twice higher molecular weight than the star precursors. These results suggest that the targeted 4C-PEO polymer was successfully isolated through the α-CD purification. Small-angle neutron scattering (SANS) measurements of the final product in dilute solution were conducted, and its chain conformation was evaluated from the scattering profile in comparison with linear and star polymers. It has been found that the cage-shaped sample exhibits a distinct peak at lower q-region in the Kratky plot, which is in strong contrast with the linear counterpart. This result must be originated from the characteristic cage-shaped architecture, that is, having branched and closed-loop configurations, and hence having higher segmental density than simple linear and star molecules. In fact, the present experimental result is consistent with the recent Monte Carlo simulation reported by Uehara and Deguchi.     

紫外光交联可降解聚对二氧环己酮/聚乙二醇薄膜制备与表征

以2,2-二甲氧基-2-苯基苯乙酮(DMPA)为引发剂,将四臂端丙烯酸酯聚对二氧环己酮(PPDO-4AC)和聚乙二醇双丙烯酸酯(PEG-DA)经紫外光照射制得PPDO/PEG交联薄膜.研究了光照时间和DMPA用量对PPDO/PEG交联薄膜凝胶含量的影响.DSC研究表明共聚物中两组分的相容性较好,Tg随着共聚物中PEG链...     

共混方法对聚氯乙烯/聚丙撑碳酸酯相容性影响

本文分别用溶液法和熔融法制得聚氯乙烯（PVC）与聚丙撑碳酸酯（PPC）共混试样，用DSC证明PVC／PPC共混物不相容，但它们不相容的程度受分子量、共混比例等因素的影响，并根据玻璃化转变温度（Tg）计算出溶液共混试样PPC富相中PVC的重量百分含量。NBR／PPC弹性体作偶联剂对PVC／PPC共混体系具有较好的增容作用，共混物中PPC的用量及分子量对共混体系性能有一定的影响。     

Thermal,crystallization, mechanical,and rheological characteristics of poly(trimethylene terephthalate)/poly(ethylene terephthalate) blends

Blends of poly(trimethylene terephthalate) (PTT) and poly(ethylene terephthalate) in the amorphous state were miscible in all of the blend compositions studied, as evidenced by a single, composition‐dependent glass‐transition temperature observed for each blend composition. The variation in the glass‐transition temperature with the blend composition was well predicted by the Gordon–Taylor equation, with the fitting parameter being 0.91. The cold‐crystallization (peak) temperature decreased with an increasing PTT content, whereas the melt‐crystallization (peak) temperature decreased with an increasing amount of the minor component. The subsequent melting behavior after both cold and melt crystallizations exhibited melting point depression behavior in which the observed melting temperatures decreased with an increasing amount of the minor component of the blends. During crystallization, the pure components crystallized simultaneously just to form their own crystals. The blend having 50 wt % of PTT showed the lowest apparent degree of crystallinity and the lowest tensile‐strength values. The steady shear viscosity values for the pure components and the blends decreased slightly with an increasing shear rate (within the shear rate range of 0.25–25 s^?1); those of the blends were lower than those of the pure components. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 676–686, 2004     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Synthesis and thermal characterization of poly(1,3-phenyl octanoate)

Poly(1,3-phenyl octanoate) (polyHPOA) was prepared by melt and solution polycondensation methods from 8-(3-hydroxyphenyl)octanoic acid (HPOA), a novel monomer useful as a chain disruptor in liquid crystalline copolyesters. The melt polycondensation technique gave a polyester of higher inherent viscosity (0.80 dL/g in p-chlorophenol) than that (0.75 and 0.56 dL/g, respectively, for the Ogata method and thionyl chloride/pyridine method in the same solvent) of solution techniques. The solubility of the polyesters was limited to strongly acidic and polar solvents. The polyester was characterized by elemental analysis, IR spectroscopy, WAXD, TGA, isothermal TGA and DTA. x-ray diffraction pattern of the polyesters indicated that it is amorphous in nature. TGA of the polyesters gave a thermal stability of 470°C in nitrogen atmosphere at 50% decomposition. The available thermal data suggest that the polyester undergoes thermal decomposition by a pyrolytic cleavage involving the ester linkage with the formation of ketene and phenol ended groups as intermediates. © 1996 John Wiley & Sons, Inc.     

The synthesis,characterization, and crystal structures of poly(2,6‐naphthalenebenzobisoxazole) and poly(1,5‐naphthalenebenzobisoxazole)

The rigid‐rod polymers, poly(2,6‐naphthalenebenzobisoxazole) (Naph‐2,6‐PBO) and poly(1,5‐naphthalenebenzobisoxazole) (Naph‐1,5‐PBO) were synthesized by high temperature polycondensation of isomeric naphthalene dicarboxylic acids with 4,6‐diaminoresorcinol dihydrochloride in polyphosphoric acid. Expectedly, these polymers were found to have high thermal as well as thermooxidative stabilities, similar to what has been reported for other polymers of this class. The chain conformations of Naph‐2,6‐PBO and Naph‐1,5‐PBO were trans and the crystal structures of Naph‐2,6‐PBO and Naph‐1,5‐PBO had the three‐dimensional order, although the axial disorder existed for both Naph‐2,6‐PBO and Naph‐1,5‐PBO. Naph‐2,6‐PBO exhibited a more pronounced axial disorder than Naph‐1,5‐PBO because of its more linear shape. The repeat unit distance for Naph‐2,6‐PBO (14.15 Å) was found to be larger compared with that of Naph‐1,5‐PBO (12.45 Å) because of the more kinked structure of the latter. The extents of staggering between the adjacent chains in the ac projection of the crystal structure were 0.25c and 0.23c for Naph‐2,6‐PBO and Naph‐1,5‐PBO, respectively. Naph‐1,5‐PBO has a more kinked and twisted chain structure relative to Naph‐2,6‐PBO. The kinked and twisted chain structure of Naph‐1,5‐PBO in the crystal seems to prevent slippage between adjacent chains in the crystal structure. The more perfect crystal structure of Naph‐1,5‐PBO may be due to this difficulty in the occurrence of the slippage. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1948–1957, 2006     

Synthesis and characterization of poly(vinylcyclohexane) derivatives

Six nearly monodisperse substituted poly(styrene) homopolymers, poly(styrene) (PS), poly(2-methylstyrene) (P2MS), poly(3-methylstyrene) (P3MS), poly(4-methylstyrene) (P4MS), poly(tertiary-butylstyrene) (PtBS), and poly(α-methylstyrene) (FαMS) were anionically polymerized and subsequently saturated using heterogeneous hydrogenation techniques to poly(vinylcyclohexane) (PVCH), poly(2-methylvinylcyclohexane) (P2MVCH), poly(3-methylvinylcyclohexane) (P3MVCH), poly(4-methylvinylcyclohexane) (P4MVCH), and poly(tertiary-butylvinylcyclohexane) (PtBVCH), respectively. In each case, except PαMS, the materials were saturated to > 99% conversion with no chain degradation. PS hydrogenations required the addition of small amounts of tetrahydrofuran to the reaction solvent cyclohexane to enhance miscibility and eliminate large-scale chain degradation. Density gradient and differential scanning calorimetry (DSC) measurements were used to characterize the density and glass transition temperature, T_g, of the unsaturated and saturated polymers. Saturation reduces the density by 3% to 11% and changes T_g substantially. The greatest variation in T_g is obtained with the 3-methyl substituted species where a 63°C increase is observed, while the highest measured T_g is 186°C for P2MVCH. Small-angle neutron scattering (SANS) experiments on binary mixtures of hydrogenous and deuterium labeled PVCH derivatives provided a determination of bulk chain statistics. The statistical segment length is relatively insensitive to vinylcyclohexane ring substitution, except with P3MVCH where a 20% greater value is obtained. ©1995 John Wiley & Sons, Inc.     

醋酸淀粉/聚乳酸的制备及性能的影响研究

采用自设计的双螺杆结构挤出制备聚乳酸(PLA)/醋酸淀粉(AS)的全生物降解材料,考察材料的AS的含量和取代度对复合材料动态流变性能、机械性能的影响。研究结果表明,AS含量明显影响复合材料的力学性能、复合黏度和储能模量:当AS含量从45%增加到70%,材料的拉伸强度下降,复数黏度和储能模量则提高。随着AS取代度由1.0上升为3.0,复合材料的复数黏度和储能模量下降,拉伸强度由12.0MPa上升为15.5MPa。对复合材料进行电镜扫描分析发现,AS以海岛结构形式分散在PLA的连续相中,取代度2.0的AS与PLA相容性最好,当其质量含量达到70%,材料的拉伸强度仍然不低于10.0MPa,具有较好的机械强度。     

Preparation,characterization and thermal stability of poly[2-(Dimethylamino)ethyl acrylate]

Poly[2-(dimethylamino)ethyl acrylate] (PDAEA) and polymer complexes of 2-(dimethylamino)ethyl acrylate (DAEA) with nickel(II), copper(II), iron(III) and cobalt(II) chlorides were prepared and characterized by means of IR, electronic spectra and elemental analysis. The thermal stability of the homopolymer was compared with those of the polymer complexes, and the order of stability was given. The activation energies of the polymer complexes were calculated.     

The synthesis and characterization of C60 chemically modified poly(N-vinylcarbazole)

Addition of C₆₀ moiety, a powerful electron acceptor to poly(N-vinylcarbazole) (PVK) by chemical reaction modifies considerably the physical and chemical properties of PVK. The characterization techniques employed are UV-visible, IR, DSC, TGA, ESR, ¹³C-NMR spectroscopy, scanning electron microscopy, XRD, and cyclic voltammetry. The fullerenated PVK, which has a visibly earthy yellow cast when compared with the unreacted polymer, has a new structure in the UV-vis absorption spectrum with the active range extending from about 280 to 870 nm, its apparent temperature sensitivity is intriguing, and an unusual temperature dependence for the ESR spectrum is observed. Considerable difference of electronic structure between pure PVK and C₆₀-PVK copolymer is indicated. The thermal stability and oxidation-reduction activation of pure PVK are enhanced by C₆₀-chemical modification. © 1996 John Wiley & Sons, Inc.     

Thermal oxidation of blends of poly(ethylene oxide) and poly(methyl methacrylate)

Thermal oxidation of poly(ethylene oxide) (PEO) and its blends with poly(methyl methacrylate) (PMMA) were studied using oxygen uptake measurements. The rates of oxidation and maximum oxygen uptake contents were reduced as the content of PMMA was increased in the blends. The results were indicative of a stabilizing effect by PMMA on the oxidation of PEO. The oxidation reaction at 140°C was stopped at various stages and PMMA was separated from PEO and its molecular weights were measured by gel permeation chromatography (GPC). The decrease in the number-average molecular weight of PMMA was larger as the content of PEO increased in the blends. The visual appearance of the films suggested that phase separation did not occur after thermal oxidation. The activation energy for the rates of oxidation in the blends was slightly increased compared to pure PEO. © 1992 John Wiley & Sons, Inc.     

Preparation,characterization, and mechanical properties of microcellular poly(aryl ether ketone) foams

High‐performance microcellular closed‐cell foams were prepared by a two‐stage batch foaming process from fluorinated poly(ether ether ketone) and characterized by scanning electronic microscopy, tensile, and dynamic mechanical analysis (DMA). The effects of saturation pressure and temperature on the cell size, cell density, and bulk density of porous materials had been discussed. The resulting materials had average cell diameters in the range 3–17 μm, and cell densities (N_f) in the order of 0.6 × 10⁹–1.39 × 10¹⁰ cells/cm³. The porosity (V_f) was in the range of 0.2–0.85. In contrast, experimental values of Young's moduli were in good agreement with theoretically predicted values, but the relative strengths were somewhat lower than that predicted. The relaxation mechanism of microcellular was systematically investigated by DMA. The dynamic mechanical spectrometry showed that the storage modulus curve at high temperature region appeared a peak and the loss modulus was lower as compared to their solid counterparts. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 173–183, 2007     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.