Synthesis and electroluminescent properties of new diazocine derivatives

ABSTRACT

DAPCz and DANaPCz have been successfully synthesized and characterized. DAPCz and DANaPCz in film state showed absorption in the range of 322 to 345 nm wavelength and exhibited blue photoluminescence (PL) emission peaks at 428 and 425 nm. PL wavelength of DAPCz is red-shifted by 3 nm than that of DANaPCz, which is due to the carbazole electron donating group of DAPCz. The use of DAPCz in a non-doped OLED device resulted in blue emission with current efficiency of 1.01 cd/A and C.I.E. of (0.26, 0.37).     

Synthesis and Property of New Blue Emitting Materials with Bulky Side Group

Two emitting compounds, 9,10-bis-[1,1′;3′,1′′]terphenyl-5′-yl-1,5-di-o-tolyl-anthracene [TP-DTA-TP] and 9,10-bis-phenyl[1,1′;3′,1′′]triphenyl-5′-yl-1,5-di-o-tolyl-anthracene [TPB-DTA-TPB] based on new twisted core moiety were synthesized through boration, Suzuki reaction, and Sandmeyer reactions. EL performance was improved by varying the chemical structure of the side group. Physical properties such as optical, electrochemical, and electroluminescent properties were investigated. Synthesized compounds were used as an EML in OLED device: ITO / 2-TNATA (60nm) / NPB (15nm)/ TP-DTA-TP or TPB-DTA-TPB (35 nm) / Alq3 (20nm) / LiF (1nm) / Al (200nm). It was found that TPB-DTA-TPB showed higher luminance efficiency and better C.I.E. value than TP-DTA-TP device.     

Synthesis and structural conformation of N‐substituted 1,4‐dihyropyridine derivatives

N‐(Phenyl)‐3,5‐dicarbethoxy‐2,6‐dimethyl‐4‐(phenyl)‐1,4‐dihydropyridine (A) and N‐(4‐methoxy phenyl)‐‐3,5 dicarbethoxy‐2,6 dimethyl‐4‐(3‐nitro phenyl)‐1,4‐dihydropyridine (B) has been synthesized as per scheme and characterized by the X‐ray diffraction method. The compound A crystallizes in monoclinic space group P21/c with cell parameters a = 9.2770(11)Å, b = 8.6410(5)Å, c = 27.601(3)Å, β = 97.724(3)°, Z = 4. The compound B crystallizes in monoclinic space group P21/c with cell parameters a = 11.229(6), b = 12.746(7)Å, c =17.606(6)Å, β = 104.531(3)°, Z = 4. The structures exhibit both intra and intermolecular hydrogen bonds. Dihydropyridine ring of both the compounds adopt a flat boat conformation. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structures of dinitroazetidine and three of its carbonyl derivatives

The structures of DNAZ (3,3-dinitroazetidine), DNAZ-COH, DNAZ-CO-DNAZ, and (DNAZ-CO)₂ have been determined. DNAZ crystallizes in the space group P2₁/c with cell parameters a = 5.928(7) Å, b = 15.8380(2) Å, c = 12.6837(15) and = 93.23°. DNAZ-COH crystallizes in the space group P2₁/c with cell parameters a = 10.3270(10) Å, b = 6.0615(12) Å, c = 11.2514(12), and = 100.17°. DNAZ-CO-DNAZ crystallizes in the space group P2₁/n with cell parameters a = 10.3630(6) Å, b = 6.0901(5) Å, c = 19.9421(11) and = 102.74°. (DNAZ-CO)₂ crystallizes in the orthorhombic space group Fdd2 with cell parameters a = 13.1956(10) Å, b = 19.524(3) Å, c = 10.3259(11). This last compound is unique in that the trans carbonyls are planar and the adjoining azetidine rings are also planar to within 0.1° in all torsion angles. DNAZ crystals have a dimeric asymmetric unit where two nonequal molecules are bonded to each other with a single hydrogen bond. Like other four-membered rings with gem-dinitro groups, most of these dinitroazetidines display mutually perpendicular nitro groups.     

Synthesis and Characterization of Violet Light Emitting Polymer based on Fluorene and Dimethylsilane

New fluorene based light emitting polymer, poly[(4-(9,9-didecyl-9H-fluoren-2-yl) phenyl)dimethyl(phenyl)silane] (PFDPS), was synthesized by palladium-catalzed Suzuki coupling reaction. The obtained copolymer was characterized by ¹H-NMR, and IR-spectroscopy. The polymer showed good solubility in common organic solvents and weight average molecular weight of 16,300 with polydispersity index of 1.4. The maximum photoluminescence of the solution and film of the polymer was observed at 392 nm and 410 nm, respectively.

The double-layered device with the configuration, ITO/PEDOT/PFDPS/LiF/Al structure has a turn-on voltage at about 5.5 V and maximum brightness of 9.40 cd/m², and emitted violet light at 414 nm.     

Synthesis and structure of 4-methyl-1-N-(p-tolyl)imidazole as organic corrosion inhibitor

Heterocyclic organic compounds containing nitrogen, sulfur or oxygen atoms are often used to protect metals from corrosion acting as organic corrosion inhibitors. Their inhibiting role is based on excellent ligand abilities and formation of stabile metal complex. Two requirements are essential for using selected class of organic inhibitors: (a) ligand capacity in the conditions of corrosion such as atmospheric conditions, acid or neutral corrosion, etc., and (b) nontoxicity, i.e., environmentally friendly inhibitors. Imidazole derivatives are capable to fulfil both requirements and they are, from that point of view, very promising and profound class of ligands. Synthesis and X-ray diffraction molecular and crystal structure of 4-methyl-1-N-(p-tolyl)imidazole has been reported, since it exhibits the most prominent corrosion inhibiting role. The synthesis, starting from 4-methylimidazole and 4-bromotoluene, is based on Ullmann-type coupling reaction by applying modifications of N-arylation by arylhalogenides and Cu₂O as an efficient catalyst.

The molecular and crystal structure of prepared N-substituted imidazole derivative reveals non-planar molecular conformation and the supramolecular assembling of the molecules via C-H···N intermolecular hydrogen bonds between C_sp2-H proton donor groups and basic imidazole nitrogen atom. The molecules are related by a 2₁ screw axis parallel to [0 1 0] in the form of infinite C(4) zig-zag 1D chains via C-H···N intermolecular hydrogen bonds. Such alignment produces additional weak stacking interaction between imidazole and phenyl ring of related chains.     

Synthesis of ZnO nanostructures composed of nanosheets with controllable morphologies

ZnO nanostructures composed of nanosheets have been synthesized by a facile low temperature reaction of Zn(OH)₂ and NaOH without the aid of any organic molecular templates. The influences of the reaction parameters, such as the concentrations of Zn(NO₃)₂, reaction temperatures, and reaction time on the morphologies of ZnO have been investigated. The thickness of ZnO nanosheets can be adjusted from 10–20 nm to 30–40 nm by altering the reaction temperatures from 80 °C to 180 °C. ZnO nanosheets are single crystals and the growth direction is perpendicular to [1100]. A possible gradual nucleation – rapid growth formation mechanism of ZnO nanosheets is proposed. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and optical property characterization of textured barium titanate thin films for photonic applications

We have investigated the growth of barium titanate thin films on bulk crystalline and amorphous substrates utilizing biaxially oriented template layers. Ion beam-assisted deposition was used to grow thin, biaxially textured, magnesium oxide template layers on amorphous and silicon substrates. Growth of highly oriented barium titanate films on these template layers was achieved by molecular beam epitaxy using a layer-by-layer growth process. Barium titanate thin films were grown in molecular oxygen and in the presence of oxygen radicals produced by a 300 W radio frequency plasma. We used X-ray and in situ reflection high-energy electron diffraction (RHEED) to analyze the structural properties and show the predominantly c-oriented grains in the films. Variable angle spectroscopic ellipsometry was used to analyze and compare the optical properties of the thin films grown with and without oxygen plasma. We have shown that optical quality barium titanate thin films, which show bulk crystal-like properties, can be grown on any substrate through the use of biaxially oriented magnesium oxide template layers.     

Synthesis and structural investigations of derivatives of 5-ethyl-2-styryl-pyridine

Because of their strongly delocalized electronic systems, polymeric and non-polymeric aromatic compounds show high nonlinear optical properties. The present work deals with the synthesis and structural characterization (including X-ray single crystal studies) of new picoline derivatives, 5-ethyl-2-(4-nitro-styryl)-pyridine, space group P a = 6.9505(7), b = 7.418(1), c = 13.877(2) Å, = 105.14(1), = 93.88(1), = 105.89(1)°, and 5-ethyl-2-(4-nitro-7-ol-styryl)-pyridine, space group Pcab, a = 8.628(2), b = 10.405(2), and c = 31.604(5) Å.     

Solvothermal synthesis and good electrochemical property of pinetree like Bi2S3

Hierarchical pinetree like Bi₂S₃ was synthesized through a facile solvothermal route in the mixture of deionized water and tetrahydrofuran. The phase composition, morphology, and structure of the as‐prepared Bi₂S₃ products were characterized by using various techniques including X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). It was found that the pinetree like Bi₂S₃ structures were composed of numerous assembled nanosheets, which had uniform morphology with the mean width and length of about 110 nm and 15 μm, respectively. Furthermore, the electrochemical property of the obtained pinetree like Bi₂S₃ was investigated. The pinetree like Bi₂S₃ presented both the high electrochemical hydrogen storage and electrochemical Li intercalation performance.     

Synthesis and characterization of potassium magnesium sulphate hexahydrate crystals

Potassium magnesium sulphate hexahydrate (picromerite) was synthesized and single crystals were obtained from saturated aqueous solution by slow evaporation method at room temperature. The crystals were bright, colourless and transparent having well defined external faces. The grown crystals were characterized through Fourier Transform Infrared (FTIR) spectral studies and thermal analysis. The FTIR data were used to assign the characteristic vibrational frequencies of the various chemical bonds in the compound. The compound crystallizes in monoclinic lattice with the space group P2₁/c. The thermogravimetry (TG) indicates the removal of only two water molecules around 100 °C. A suitable decomposition pattern was formulated based on the percentage weight losses observed in TG of the compound. The results of differential thermal analysis (DTA) conform to the results of TGA. Differential scanning calorimetry (DSC) analysis carried out at high temperature suggests that the occurrence of two phase transitions in the crystal between 140 and 180 °C. When the crystal was cooled below the room temperature up to –170 °C, no thermal anomaly was observed. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and Size-Selective Application of Palladium Metal Particles Intercalated in Mesopore-Size Controlled Smectite

Abstract

Mesoporous smectite-type materials (SM) were synthesized with a hydrothermal method from water glass, magnesium chloride and alkyl ammonium salt. The mesopore diameter of SM was controlled from 30 to 130 Å by changing the reaction temperature, pH and the template materials during hydrothermal treatment. Palladium metal particles were intercalated in the mesopores of SM with an ion-exchanging of [Pd(NH₃)₄Cl₂] on them and hydrogen reduction treatment. The size-selective hydrogenation of butadiene-acrylonitrile rubbers (NBR) in carbon tetrachloride was studied using palladium loaded smectite catalysts (Pd-SM). The reaction was controlled by the sizes of mesopore of Pd-SM, which determine the diffusion of polymer molecules onto the dispersed palladium particles within the pores.     

Synthesis and electrochemical properties of vanadyl phosphate di-hydrate/polyaniline derivatives hybrid films

Vanadyl phosphate and its hybrid compounds have proven to undergo electrochemical intercalation and de-intercalation of lithium ions, which enables its use as cathode material for Li ion rechargeable batteries. In this context, vanadyl phosphate di-hydrate/polyaniline derivatives hybrid films were synthesized via the exfoliation and reconstruction approach in order to evaluate their potential use as cathode in ion lithium batteries. X-ray diffraction patterns indicate that the lamellar structure of the inorganic matrix is maintained, consistent with the topotactic process. In the scanning electron micrographs, hybrid films exhibit rough surface consisting of warped and cracked crystallites, quite different from vanadyl phosphate di-hydrate square platelets crystallites. Electrochemical evaluation using cyclic voltammetry and charge–discharge galvanostatic techniques shows small differences between the charge and the discharge curves, indicating an irreversibility of the hybrid systems.     

Synthesis, characterization, and catalytic properties of a mesostructured lamellar xerogel tungsten oxide phase

Cetyltrimethylammonium bromide (CTAB) and n-hexadecylamine (HDA) have been used as template in the synthesis of a mesolamellar xerogel tungsten oxide phase (WO₃/CTAB/HDA). The catalytic properties of the resulting material were investigated in the oxidation of cis-cyclooctene, styrene, and cyclohexane, using hydrogen peroxide (H₂O₂), terc-butyl hydroperoxide (t-BOOH), or m-chlorperbenzoic acid (m-CPBA) as oxygen transfer agent. In general, the catalytic results were comparable to those obtained with related systems, thus suggesting the potential application of this material as catalyst for epoxidation reactions.     

Strain variation in p-GaN by different spacer layers in the light emitting diodes and their microstructural and emission behaviors

InGaN/GaN multiple quantum well-based blue light emitting diodes (LEDs) with different spacer layer structures were grown by metalorganic chemical vapor deposition. Fast-Fourier-transformed high-resolution transmission electron microscopy was used to determine the influence of the strain status in the spacer layer on Mg distribution and device performance. A comparison of the (1 1¯ 0 0) planar distance showed that the high-temperature grown InGaN layer in the spacer had a high level of stored strain. This led to the formation of a continuous facet contrast induced by Mg segregation in the p-layer, which was responsible for the deterioration of the electroluminescence performance of the LEDs. These results show that the delicate control of stored strain in nitride films is important for improving the device performance.     

Synthesis and spectrum stability of high quality CdTe quantum dots capped with stearate groups in N-oleoylmorpholine solvent

The stearate-capped CdTe quantum dots (QDs) have been first prepared via direct reaction of cadmium stearate with Te powder in N-oleoylmorpholine solvent, which was a kind of clean, air-stable and conveniently synthesized acylamide, and can readily dissolve precursors cadmium stearate and Te powder at a relative low temperature. The as-prepared CdTe QDs exhibited size-dependent optical properties, steep absorbance edge and narrow photoluminescence full width at half maximum. The high-resolution transmission electron microscopy images and X-ray diffraction revealed that the highly monodisperse CdTe QDs were of regular spherical morphology with zinc blende crystal structure displaying mean sizes of about 4 nm. The energy dispersed spectrometry measurement indicated the presence of Cd and Te, with the Cd:Te ratio being close to 1:1. Fourier transform infrared transmission spectra confirmed the existence of stearate on the CdTe QDs surfaces. The experimental results also demonstrated that the stearate-capped CdTe QDs had an unexpected good stability.     

Synthesis,growth and characterization of single crystals of pure and thiourea doped L‐glutamic acid hydrochloride

L(+)Glutamic acid hydrochloride [HOOC (CH₂)₂CH(NH₂) COOH·HCl], a monoamino dicarboxylic acid salt of L‐Glutamic acid was synthesized and the synthesis was confirmed by FTIR analysis. Solubility of the material in water was determined. Pure and Thiourea doped L‐Glutamic acid hydrochloride crystals were grown by low temperature solution growth using solvent evaporation technique. XRD, UV‐Vis‐NIR analyses were carried out for both pure and thiourea doped crystals. The crystals were qualitatively analyzed by EDAX analysis and the presence of thiourea was confirmed. The cell parameters of L‐Glutamic acid hydrochloride have been determined as a = 5.151 Å, b = 11.79 Å, c = 13.35 Å by X‐ray diffraction analysis and it crystallizes in orthorhombic space group P2₁2₁2₁. UV‐Vis‐NIR spectra analysis showed good optical transmission in the entire visible region for both pure and doped crystals. Micro hardness of both pure and doped crystals has been determined using Vickers micro hardness tester. The SHG efficiencies of both pure and doped crystals were determined using Kurtz powder test and pure L‐Glutamic acid hydrochloride crystal was found to possess better efficiency than thiourea doped L‐Glutamic acid hydrochloride crystals. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of calcium carbonate polymorphs in the presence of polyacrylic acid

Calcium carbonate precipitates are prepared from a solution of CaCl₂ and K₂CO₃ in the presence of polyacrilic acid. The effect of polyacrilic acid incorporation in the [25–80 °C] temperature range on crystal morphologies and CaCO₃ precipitated polymorph concentrations are investigated using scanning electron microscopy and X-ray diffraction quantitative microstructural and phase analysis. Large changes in morphology and phase proportions are observed in the presence of polyacrylic acid, which strongly depend on the solution temperature. While crystallization of vaterite is favoured in the presence of polyacrilic acid up to 50 °C, it is largely destabilized at higher temperatures. Our process also enables the elaboration of particles in the range 10–20 nm.     

Synthesis and characterization of some novel liquid crystalline compounds of 1,3,4-oxadiazoline and their hydrazone derivatives

Three new series of mesogens have been synthesized by fixing 4-methoxy or 4-butoxy substituted phenyl ring in one side and 4-hydroxy, bromo or amino substituted phenyl group in the other side with different central linkage. The molecular structure of these series was confirmed by elemental analysis and FTIR and ¹HNMR spectroscopy. The mesomorphic properties were studied by using differential scanning calorimetry (DSC) and optical polarizing microscopy (OPM). All the compounds of series [I] exhibit enantiotropic smectic B (SmB) phase. All the compounds of series [II] and [III] display SmB and nematic (N) phases. The mesomorphic properties were found to be dependent on the two terminal 4-substituted phenyl groups and the central linkage group.