Syntheses, structure, redox and catalytic epoxidation properties of dioxomolybdenum(VI) complexes with Schiff base ligands derived from tris(hydroxymethyl)amino methane

Five kinds of dioxomolybdenum(VI) complexes with Schiff base ligands derived from tris(hydroxymethyl)amino methane are prepared and structurally characterized by X-ray crystallography, which reveals that these complexes adopt a distorted octahedral six-coordinate configuration formed by the tridentate Schiff base ligand, one coordinating water and two binding oxygen atoms. These complexes show good catalytic activities and selectivity in the epoxidation of cyclohexene with t-butylhydroperoxide, especially for complex 4, which could give a nearly 100% of epoxidation conversion and selectivity. Introduction of the electron-withdrawing group to the salicylidene ring of complex strongly increases the effectiveness of a catalyst, but decreases the redox stability of a complex.     

Copper Schiff base complex immobilized on magnetic graphene oxide: Efficient heterogeneous nanocatalyst for treating environmental pollutants and synthesis of chromenes

Herein, a new Cu(II) Schiff base complex was immobilized onto the magnetic graphene oxide surface through a stepwise procedure. The as-synthesized nanostructure (GO/Fe₃O₄/CuL) was characterized by various techniques including Fourier transform infrared (FT-IR), Raman spectroscopies, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), energy-dispersive X-ray (EDX) and inductively coupled plasma (ICP) spectroscopies, N₂ adsorption–desorption analysis, vibrating sample magnetometry (VSM), and X-ray diffraction (XRD). The catalytic activity of the synthesized nanocatalyst was examined in 4-nitrophenol (4-NP), Congo red (CR), and methylene blue (MB) reduction using NaBH₄ in an aqueous solution at room temperature. The reaction progress was monitored by UV–Vis spectroscopy. Also, the synthesized nanostructure was evaluated as an efficient catalyst for the synthesis of 2-amino-4H-benzopyrans via three-component reactions of 1-naphthol, malononitrile, and various aldehydes in ethanol/water at 50°C. The use of green solvents, the short reaction time, the high product yield, and easy separation from the reaction environment are the main benefits of this catalytic system. By covalent grafting of the complex on the graphene oxide surface, its catalytic performance significantly increased compared with graphene oxide; this is probably related to the chemical change of the graphene oxide surface. The results show the high chemical stability and the improved reusability of the synthesized nanocatalyst (six times) without significant loss in the catalytic activity of GO/Fe₃O₄/CuL nanocomposite.     

Olefin epoxidation with tert-butyl hydroperoxide catalyzed by functionalized polymer-supported copper(II) Schiff base complex

Abstract  

A new polymer-supported Cu(II) Schiff base complex has been synthesized and characterized by elemental (including metal) analysis, FT-IR spectroscopy, UV–Vis diffuse reflectance spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The catalytic performance of this complex was evaluated in the epoxidation of styrene in acetonitrile/N,N-dimethylformamide (9:1) mixture with 70% tert-butyl hydroperoxide as an oxidizing agent under liquid phase reaction conditions for selective synthesis of styrene oxide. Suitable reaction conditions have been optimized by considering the effects of various reaction parameters such as temperature, reaction time, solvent, oxidant, catalyst amount, and styrene to hydroperoxide molar ratio for the maximum conversion of styrene as well as selectivity of styrene oxide. We have also investigated the epoxidation reaction of various olefins under the optimized reaction conditions. Comparison between catalytic activities of the polymer-supported Cu(II) Schiff base complex and its homogeneous analogue showed that the polymer-supported catalyst was more active. This heterogeneous complex was reused for five times. The selectivity of the heterogeneous catalyst does not change even after five times of reusing.     

Polystyrene-Bound Hydrazone Schiff Base Molybdenum Complex: Synthesis,Characterization, and Application as a Reusable Heterogeneous Catalyst in the Oxidation of Sulfides

Russian Journal of Organic Chemistry - A dioxomolybdenum hydrazone Schiff base complex immobilized on chloromethylated polystyrene [MoO2L@CMP] was synthesized and characterized by various...     

Mn(III)‐salan/graphene oxide/magnetite nanocomposite as a highly selective catalyst for aerobic epoxidation of olefins

A nanocomposite was synthesized using carbon‐coated Fe₃O₄ nanoparticle‐decorated reduced graphene oxide as a convenient and efficient supporting material for grafting of a manganese–reduced Schiff base (salan) complex via covalent attachment. The nanocomposite was characterized using X‐ray diffraction, Fourier transform infrared and diffuse reflectance UV–visible spectroscopies, inductively coupled plasma atomic emission spectrometry and scanning electron microscopy. It was evaluated as a catalyst for the aerobic epoxidation of olefins in acetonitrile in combination with a sacrificial co‐reductant (isobutyraldehyde). The catalytic performance of the heterogeneous system of the Mn–salan complex is superior to that of the homogeneous one. The catalyst activity strongly depends on the reaction temperature and nature of the solvent. The epoxide yield increases with the nucleophilic character of the olefin. The nanocomposite performs well as an epoxidation catalyst for electron‐rich and conjugated olefins. It can be recovered from the reaction medium by magnetic decantation and reused, maintaining good catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Dioxomolybdenum(VI) complex covalently attached to amino‐modified graphene oxide: heterogeneous catalyst for the epoxidation of alkenes

Transition metal salen complex MoO₂–salen was successfully tethered onto amino‐functionalized graphene oxide (designated as MoO₂–salen–GO), which was tested in the epoxidation of various alkenes using tert‐butylhydroperoxide or H₂O₂ as oxidant. Characterization results showed that dioxomolybdenum(VI) complex was successfully grafted onto the amino‐functionalized graphene oxide and the structure of the graphene oxide was well preserved after several stepwise synthesis procedures. Catalytic tests showed that heterogeneous catalyst MoO₂–salen–GO was more active than its homogeneous analogue MoO₂–salen in the epoxidation of cyclooctene due to site isolation. In addition, the MoO₂–salen–GO catalyst could be reused three times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Selective oxidation of benzyl alcohols to benzaldehydes catalyzed by dioxomolybdenum Schiff base complex: synthesis,spectral characterization,crystal structure,theoretical and computational studies

Transition Metal Chemistry - A novel dioxomolybdenum Schiff base complex, MoO2L·DMF, was synthesized by treating MoO2(acac)2 with an ONO donor Schiff base ligand (H2L) derived by the...     

Nickel(II) Schiff base complex supported on nano‐titanium dioxide: A novel straightforward route for preparation of supported Schiff base complexes applying 2,4‐toluenediisocyanate

For the first time, a novel, straightforward and inexpensive route for immobilization of metals in Schiff base complex form is reported applying 2,4‐toluenediisocyanate as a precursor of primary amine group. A nickel(II) Schiff base complex supported on nano‐TiO₂ was designed and synthesized as an effective heterogeneous nanocatalyst for organic reactions, and well characterized using various techniques such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray analysis and thermogravimetric analysis. The catalytic efficiency of the complex was evaluated in selective oxidation of sulfide to sulfoxide by hydrogen peroxide as an oxidant under solvent‐free conditions at room temperature, which successfully resulted in high yield and high conversion of products. Effective factors including solvent type, oxidant and catalyst amount were also optimized. The catalyst shows outstanding reusability and could be impressively recovered for six consecutive cycles without significant change of its catalytic efficiency.     

Selective hydrogenation and Suzuki cross‐coupling reactions of various organic substrates using a reusable polymer‐anchored palladium(II) Schiff base complex

A new polymer‐anchored Pd(II) Schiff base complex has been prepared and characterized using scanning electron microscopy, elemental analysis, atomic absorption spectroscopy, TGA and spectrometric methods such as diffuse reflectance spectra of solid and FT‐IR spectroscopy. This polymer‐anchored palladium catalyst shows excellent catalytic activity in the liquid‐phase hydrogenation reaction of styrene oxide to obtain selectively 2‐phenylethanol at normal pressure of hydrogen gas (1 atm.) at room temperature in DMF medium. We have also studied the liquid‐phase hydrogenation reaction of various organic substrates. The catalyst exhibits excellent catalytic activity for the Suzuki cross‐coupling of various substituted and non‐substituted aryl halides. The influences of various parameters were investigated to optimize reaction conditions. The reusability experiments show that the catalyst can be used five times without much loss in catalytic activity. Copyright © 2012 John Wiley & Sons, Ltd.     

Copper(II) Schiff Base Complex Immobilized on Superparamagnetic Fe3O4@SiO2 as a Magnetically Separable Nanocatalyst for Oxidation of Alkenes and Alcohols

A new heterogeneous catalyst containing a copper(II) Schiff base complex covalently immobilized on the surface of silica‐coated Fe₃O₄ nanoparticles (Fe₃O₄@SiO₂‐Schiff base‐Cu(II)) was synthesized. Characterization of this catalyst was performed using various techniques. The catalytic potential of the catalyst was investigated for the oxidation of various alkenes (styrene, α‐methylstyrene, cyclooctene, cyclohexene and norbornene) and alcohols (benzyl alcohol, 3‐methoxybenzyl alcohol, 3‐chlorobenzyl alcohol, benzhydrol and n ‐butanol) using tert ‐butyl hydroperoxide as oxidant. The catalytic investigations revealed that Fe₃O₄@SiO₂‐Schiff base‐Cu(II) was especially efficient for the oxidation of norbornene and benzyl alcohol. The results showed that norbornene epoxide and benzoic acid were obtained with 100 and 87% selectivity, respectively. Moreover, simple magnetic recovery from the reaction mixture and reuse for several times with no significant loss in catalytic activity were other advantages of this catalyst     

Synthesis,characterization, and catalytic activity of supported molybdenum Schiff base complex as a magnetically recoverable nanocatalyst in epoxidation reaction

A heterogeneous nanocatalyst was prepared via covalent anchoring of dioxomolybdenum(VI) Schiff base complex on core–shell structured Fe₃O₄@SiO₂. The properties and the nature of the surface-fixed complex have been identified by a series of characterization techniques such as SEM, EDX, XRD, TGA, FT-IR, and VSM. The synthesized hybrid material was an efficient nanocatalyst for selective oxidation of olefins to corresponding epoxides with t-BuOOH in high yields and selectivity. The catalyst could be conveniently recovered by applying an external magnetic field and reused several times without significant loss of efficiency.     

双二茂铁基醛亚胺钼（ＶＩ）配合物的合成及催化性能

通过二茂铁甲醛与丙二胺反应得到双二茂铁基醛亚胺配体N~1,N~3-双二茂铁亚甲基丙烷-1, 3-二胺(FcMP), FcMP与MoO_2Cl_2(THF)_2的四氢呋喃溶液作用, 合成了双二茂铁基醛亚胺钼(VI)配合物. 以配合物为催化剂, 叔丁基过氧化氢为氧化剂, 分别以苯乙烯和环己烯为底物, 考察了温度、时间、催化剂量及溶剂对于烯烃均相环氧化反应的催化性能的影响. 结果表明, 在最优实验条件下, 反应12 h, 环己烯的转化率为88%, 环氧环己烷的选择性为98%;苯乙烯的转化率为84%, 氧化苯乙烯的选择性为76%. 催化剂经简单分离可回收使用, 且催化活性基本保持不变. 同时对环氧化反应的机理进行了初步探讨.     

Iron pincer complex and its graphene oxide composite as catalysts for Suzuki coupling reaction

We report the synthesis of Fe-NCN pincer complex as homogenous catalyst and its composite by immobilizing the complex on amino functionalized graphene oxide as a heterogeneous catalyst for Suzuki coupling reactions. Both the complex and the composite were employed in catalyzing the Suzuki-Miyaura cross-coupling reaction between the aryl halide and phenyl boronic acid in acetonitrile solvent media with Cs₂CO₃ as a base. Effect of substitution over aryl halide was also investigated. Immobilization of the pincer complex had advantageous recovery and reuse of the catalyst as compared to its homogenous analog with no significant decrease in the catalytic efficiency.     

Heterogenized peroxopolyoxotungstate catalyst on the surface of clicked magnetite‐graphene oxide nanocomposite: Magnetically recoverable epoxidation catalyst

A new heterogeneous catalyst for the epoxidation of olefins was prepared by immobilization of peroxophosphotungstate anions on the surface of clicked magnetite‐graphene oxide as magnetically recoverable support. To prepare the heterogeneous catalyst, the clicked magnetite‐graphene oxide support was prepared by thiolene click reaction of thiol functionalized graphene oxide with vinyl modified magnetite nanoparticles. The tailored support was then modified with aminopropyl groups followed by electrostatic interaction with peroxophosphotungstate anions to achieve the desired heterogeneous catalyst. Characterization of the catalyst was performed by various physicochemical methods which confirmed the successful immobilization of peroxopolyoxotungstate species on the surface of clicked magnetite‐graphene oxide. Catalytic activity of the catalyst revealed its high catalytic activity and selectivity in the epoxidation of various olefins in the presence of H₂O₂ as green oxidant. This heterogeneous catalyst can be magnetically reused several times without significant loss of activity and selectivity.     

Biomimetic Oxidation of Sulfides Catalyzed by Polystyrene-Bound Dioxomolybdenum Complex as an Efficient Recoverable Heterogeneous Catalyst

Russian Journal of Organic Chemistry - In the present study, a dioxomolybdenum(VI) complex chelated with the ONO tridentate Schiff base ligand supported on chloromethylated polystyrene [MoO2L@CMP]...     

Synthesis and characterization of a polymer-anchored palladium(II) Schiff base complex and its catalytic efficiency in phosphine-free Sonogashira coupling reactions

A polymer-anchored Pd(II) Schiff base complex has been synthesized by reacting a polymeric amine with 2-pyridinecarboxaldehyde to get the polymer-anchored Schiff base, which was then reacted with palladium acetate. The catalyst was characterized by physicochemical and spectroscopic methods. It shows excellent catalytic activity in the Sonogashira coupling of phenylacetylene with aryl halides using triethylamine as a base and copper iodide as a co-catalyst in water under open air at 70 °C. We have also studied the effects of base and solvent on the coupling reaction. Sonogashira reactions of phenylacetylene with a variety of functionalized aryl halides were performed under the optimized reaction conditions. This catalyst gives excellent yields without the use of phosphine ligands. Further experiments showed that the catalyst can be used five times without much loss in the catalytic activity.     

Heterogenization of a molybdenum Schiff base complex as a magnetic nanocatalyst: An eco-friendly,efficient, selective and recyclable nanocatalyst for the oxidation of alkenes

A Schiff base ligand derived from 5-bromo-2-hydroxybenzaldehyde and 2,2′-dimethylpropylenediamine (H₂L) and its corresponding dioxomolybdenum(VI) complex (Mo(O)₂L) has been synthesized and characterized by spectroscopic methods. The adsorption of Mo(O)₂L on the surface of silica-coated magnetite nanoparticles via hydrogen bonding led to the formation of (α-Fe₂O₃)–MCM-41–Mo(O)₂L as a heterogeneous catalyst. FT-IR and atomic absorption spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize and investigate the new nanocatalyst. A practical catalytic method for the efficient and highly selective oxidation of a wide range of olefins with hydrogen peroxide and tert-butyl hydroperoxide in ethanol over the prepared molybdenum nanocatalyst was investigated. Under reflux conditions, the oxidation of cyclooctene with tert-butyl hydroperoxide or hydrogen peroxide led to the formation of epoxide as the sole product. The catalyst was reused at least six times without a significant decrease in catalytic activity or selectivity, and without detectable leaching of the catalyst.     

Iron and cobalt salicylaldimine complexes as catalysts for epoxide and carbon dioxide coupling: effects of substituents on catalytic activity

The synthesis and characterization of substituted ONNO-donor salen-type Schiff base complexes of general formula [M^III(L)Cl] (L = Schiff base ligand, M = Fe, Co) is reported. The complexes have been applied as catalysts for the coupling of carbon dioxide and styrene oxide in the presence of tetrabutylammonium bromide as a co-catalyst. The reactions were carried out under relatively low-pressure and solvent-free conditions. The effects of the metal center, ligands, and various substituents on the peripheral sites of the ligand on the coupling reaction were investigated. The catalyst systems were found to be selective for the coupling of CO₂ and styrene oxide, resulting in cyclic styrene carbonate. The cobalt(III) complex with no substituents on the ligand showed higher activity (TON = 1297) than the corresponding iron(III) complex (TON = 814); however, the iron(III)-based catalysts bearing electron-withdrawing substituents on the salen ligands (NEt₃, TON = 1732) showed the highest catalytic activity under similar reaction conditions. The activity of one of the cobalt(III) complexes toward the coupling of 1-butene oxide, cyclohexene oxide and propylene oxide with CO₂ was evaluated, revealing a notable activity for the coupling of 1-butene oxide.     

Oxo‐vanadium(IV) Schiff base complex supported on modified MCM‐41: a reusable and efficient catalyst for the oxidation of sulfides and oxidative S–S coupling of thiols

Oxo‐vanadium(IV) Schiff base complex supported on MCM‐41 as an organic–inorganic hybrid heterogeneous catalyst was synthesized with post‐grafting of MCM‐41 with 3‐aminoropropyltrimethoxysilane and subsequent reaction with 3,4‐dihydroxybenzaldehyde and then complexation with oxo‐vanadium acetylacetonate salt. The catalyst was analysed using a series of characterization techniques such as Fourier transform infrared spectroscopy, small‐angle X‐ray diffraction, nitrogen absorption isotherm, transmission electron microscopy and thermogravimetric analysis. The data collected provided evidence that the vanadium complex was anchored onto MCM‐41. High catalytic activity of this catalyst was observed in the oxidation of various sulfides and thiols (into sulfoxides and disulfides, respectively) with urea hydrogen peroxide as oxidant in high to excellent yields and selectivity under mild conditions. The heterogeneous catalyst could be recovered easily and reused several times without significant loss in catalytic activity and selectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

聚苯乙烯负载席夫碱Mo(Ⅵ)配合物合成、表征及其在环己烯环氧化反应中的催化活性

合成了聚苯乙烯负载乙二胺缩水杨醛席夫碱与Mo(Ⅵ)的配合物,并对其结构进行了表征.该配合物催化环己烯环氧化反应与小分子配合物MoO₂(acac)₂相比,具有更优良的催化活性和选择性;建立了催化剂中Mo分析和环氧环己烷气相色谱分析新方法;探讨了配合物及环氧环己烷合成过程诸因素的影响;优化了环氧环己烷合成条件,即以n(t-BuOOH)=0.1mol计,n(C₆H₁₀)∶n(t-BuOOH)=3∶1,溶剂5mL,反应温度80℃,时间60min.在该条件下,环氧环己烷收率(以t-BuOOH计)99.2%以上,质量分数约99.5%(GC检测).催化剂循环使用5次后,未见活性明显下降,环氧环己烷收率(以t-BuOOH计)仍接近99%.