Emulsion polymerization of vinyl acetate using a polymerizable surfactant. I. Kinetic studies

A polymerizable surfactant, sodium dodecyl allyl sulfosuccinate (TREM LF-40; Henkel) and its nonpolymerizable counterpart were used in comparative studies of the emulsion polymerization of vinyl acetate. The conversion-time behavior differed for the two surfactants; the TREM LF-40 showed a decrease in the polymerization rate with increasing concentration while its hydrogenated derivative showed the opposite behavior, the rate increasing with increasing surfactant. Particle size analysis revealed a decreasing particle size with increasing surfactant concentration for both series of reactions. An explanation for the seemingly ambiguous results obtained for the polymerizable surfactant was sought by examining the reactivity of its vinyl group in copolymerization with vinyl acetate and its allylic group in a chain transfer reaction. The results suggest that both the copolymerization and chain transfer reactions can lead to the observed reduction in polymerization rate with increasing TREM LF-40 concentration. © 1992 John Wiley & Sons, Inc.     

From metal‐catalyzed radical telomerization to metal‐catalyzed radical polymerization of vinyl chloride: Toward living radical polymerization of vinyl chloride

The metal‐catalyzed radical polymerization of vinyl chloride (VC) in ortho‐dichlorobenzene initiated with various activated halides, such as α,α‐dihaloalkanes, α,α,α‐trihaloalkanes, perfloroalkyl halides, benzyl halides, pseudohalides, allyl halides, sulfonyl halides, α‐haloesters, α‐halonitriles, and imidyl halides, in the presence of Cu(0)/2,2′‐bipyridine, Fe(0)/o‐phenantroline, TiCp₂Cl₂, and other metal catalysts is reported. The formation of the monoadduct between the initiator and VC was achieved with all catalysts. However, propagation was observed only for metals in their zero oxidation state because they were able to reinitiate from geminal dihalo or allylic chloride structures. Poly(vinyl chloride) with molecular weights larger then the theoretical limit allowed by chain transfer to VC were obtained even at 130 °C. In addition, the most elemental features of a living radical polymerization, such as a linear dependence of the molecular weight and a decrease of polydispersity with conversion, were observed for the most promising systems based on iodine‐containing initiators and Cu(0), that is, I? CH₂? Ph? CH₂? I/Cu(0)/bpy (where bpy = 2,2′‐bipyridyl), at 130 °C. However, because of the formation of inactive species via chain transfer to VC and other side reactions, the observed conversions were in most cases lower than 40%. A mechanistic interpretation of the chain transfer to monomer in the presence of Cu species is proposed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3392–3418, 2001     

(NH_4)_2S_2O_8-环己酮NaHSO_3加合物引发醋酸乙烯酯乳液聚合研究

对用（NH4）2S2O8－环己酮NaHSO2加合物新型氧化还原体系引发的醋酸乙烯酯聚合过程进行研究，求得该聚合反应的表观活化能为84．6kJ／mol，并测定了聚合产物的粘均分子量．     

微波辐射催化合成肉桂酸苄酯

肉桂酸苄酯是一种具有弱苏合香、花香等香气的香料,主要用于配制龙蜒香,在东方型香脂中作为定香剂,也可用作皂用、化妆用及果实香精的调香配料。肉桂酸苄酯的合成,在工业上,主要采用肉桂酸钠与氯化苄在二乙胺作用下反应,反应时间长达17h,产率80％以上。近年来的研究     

Copolymerization of styrene and vinyl acetate by successive photoinduced charge‐transfer polymerization

The synthesis of a diblock copolymer of styrene and vinyl acetate (VAC), PS‐b‐PVAC, was performed by successive photoinduced charge‐transfer polymerization (CTP) under UV irradiation. A novel amphiphilic diblock copolymer of PS‐b‐PVA then was obtained by the hydrolysis of the diblock copolymer PS‐b‐PVAC with sodium ethoxide as a catalyst. Both of them were characterized by Fourier transform infrared, H NMR, and gel permeation chromatography in detail. The effect of the solvents on the CTP and the kinetics of the CTP are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 914–920, 2000     

Synthesis and characters of hyperbranched poly(vinyl acetate) by RAFT polymeraztion

Reversible addition-fragmentation chain transfer (RAFT) polymerization of VAc in the presence of ECTVA, which capable of both reversible chain transferable through a xanthate moiety and propagation via a vinyl group, led to highly branched copolymers by a method analogous to self-condensing vinyl polymerization (SCVP). The ECTVA acted as a vinyl acetate AB^∗ inimer. It was copolymerized with vinyl acetate (VAc) in ratios selected to tune the distribution and length of branches of resulting hyperbranched poly(vinyl acetate). The degree of branching increased with chain ECTVA concentration, as confirmed by NMR spectroscopy. The polymer structure was characterized via MALDI–TOF. Retention of the xanthate compound during the polymerization was evidenced by successful chain extension of a branched (PVAc) macroCTA by RAFT polymerization. The branched PVAc led to better dissolution as compared to linear PVAc, an effect attributed primarily to an increased contribution of end groups.     

Meglumine sulfate catalyzed solvent-free one-pot synthesis of coumarins under microwave and thermal conditions

A convenient method has been developed for the Pechmann reaction of phenols and β-keto esters catalyzed by meglumine sulfate. Solvent-free conditions, inexpensive catalyst, short reaction times, high yield, and ease of purification of the products are the advantages of this protocol. This novel catalytic system is expected to contribute to the development of more benign Pechmann condensation reactions of phenols with β-keto esters.     

Coupling of butyl vinyl tellurides with metal acetylides catalyzed by nickel complexes

Z-Vinylic tellurides react with metal acetylides under nickel complexes catalysis to give Z-enynes and Z-enediynes in good yields.     

Computational mechanistic studies of acceptorless dehydrogenation reactions catalyzed by transition metal complexes

Acceptorless dehydrogenation (AD) that uses non-toxic reagents and produces no waste is a type of catalytic reactions toward green chemistry. Acceptorless alcohol dehydrogenation (AAD) can serve as a key step in constructing new bonds such as C-C and C-N bonds in which alcohols need to be activated into more reactive ketones or aldehydes. AD reactions also can be utilized for hydrogen production from biomass or its fermentation products (mainly alcohols). Reversible hydrogenation/ dehy-drogenation with hydrogen uptake/release is crucial to realization of the potential organic hydride hydrogen storage. In this article, we review the recent computational mechanistic studies of the AD reactions catalyzed by various transition metal complexes as well as the experimental developments. These reactions include acceptorless alcohol dehydrogenations, reversible dehydrogenation/hydrogenation of nitrogen heterocycles, dehydrogenative coupling reactions of alcohols and amines to construct C-N bonds, and dehydrogenative coupling reactions of alcohols and unsaturated substrates to form C-C bonds. For the catalysts possessing metal-ligand bifunctional active sites (such as 28, 45, 86, 87, and 106 in the paper), the dehydrogenations prefer the "bifunctional double hydrogen transfer" mechanism rather than the generally accepted-H elimination mechanism. However, methanol dehydrogenation involved in the C-C coupling reaction of methanol and allene, catalyzed by the iridium complex 121, takes place via the-H elimination mechanism, because the Lewis basicity of either the-allyl moiety or the carboxyl group of the ligand is too weak to exert high Lewis basic reactivity. Unveiling the catalytic mechanisms of AD reactions could help to develop new catalysts.     

Reversible addition‐fragmentation chain transfer polymerization of vinyl acetate under high pressure

In this work, high molecular weight polyvinyl acetate (PVAc) (M_n,GPC = 123,000 g/mol, M_w/M_n = 1.28) was synthesized by reversible addition‐fragmentation chain transfer polymerization (RAFT) under high pressure (5 kbar), using benzoyl peroxide and N,N‐dimethylaniline as initiator mediated by (S)‐2‐(ethyl propionate)‐(O‐ethyl xanthate) (X1) at 35 °C. Polymerization kinetic study with RAFT agent showed pseudo‐first order kinetics. Additionally, the polymerization rate of VAc under high pressure increased greatly than that under atmospheric pressure. The “living” feature of the resultant PVAc was confirmed by ¹H NMR spectroscopy and chain extension experiments. Well‐defined PVAc with high molecular weight and narrow molecular weight distribution can be obtained relatively fast by using RAFT polymerization at 5 kbar. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1430–1436     

Synthesis of enol and vinyl esters catalyzed by an iridium complex

Enol and vinyl esters were successfully synthesized by the use of an iridium complex as a catalyst. The reaction of carboxylic acids with terminal alkynes in the presence of catalytic amounts of [Ir(cod)Cl]₂ and Na₂CO₃ gave the corresponding 1-alkenyl esters. The addition of carboxylic acids to alkynes principally took place in the Markovnikov fashion. In addition, by the use of an Ir complex combined with NaOAc various vinyl esters were prepared through the transvinylation between carboxylic acids and vinyl acetate.     

Study of CuI catalyzed coupling reactions of aryl bromides with imidazole and aliphatic amines under microwave dielectric heating

Amination of a variety of functionalized aryl bromides with imidazole and primary and secondary amines was accomplished using a CuI/amino acid catalyst system under microwave heating. Application of microwave irradiation shortened the reaction time from 25–40 h to 6–20 min. Good to very good yields of the corresponding coupling products were obtained when imidazole and secondary amines were used as starting materials. In case of primary amines, the outcome of the reaction was dependent on the character of the substituent on aryl bromide.     

Butyl acrylate and vinyl acetate semicontinuous emulsion copolymerizations: study of stabilization performance

The use of small amounts of carboxylic monomers in industrial recipes with high solids content enhances colloidal stability due to the presence of carboxylic groups on the outer surface of the polymer particles. Understanding the relationship between several different but interdependent phenomena, including particle nucleation, kinetics, particle aggregation, monomer type, solids content, the role of the carboxylic monomer and the influence of reaction temperature may improve the control over particle size and latex stability. In this work, the kinetics and stabilization performance of semicontinuous vinyl acetate (VA) and butyl acrylate (BA) emulsion copolymerization reactions are studied under different reaction temperatures, acrylic acid (AA) concentrations, solids contents and monomer feed compositions. Results show that choosing optimal AA concentrations and reaction temperatures are key factors in order to enhance the stabilization performance in semicontinuous VA/BA emulsion copolymerization.     

Synthesis of Poly(vinyl acetate)-block-poly(dimethylsiloxane)-block-poly(vinyl acetate) Copolymers by Iodine Transfer Photopolymerization in Miniemulsion

Summary: Iodine transfer polymerization of vinyl acetate in aqueous miniemulsion, initiated by UV radiation in the presence of an α,ω-diiodo-poly(dimethylsiloxane) macrophotoiniferter has been performed. The formation of a triblock copolymer latex PVAc-b-PDMS-b-PVAc has been evidenced by ¹H-NMR and size exclusion chromatography. The size of the PDMS and PVAc blocks were modulated thus opening the way to a wide range of copolymers with different properties. A detailed study of the reaction mechanism showed the importance of the aqueous dispersed medium to achieve a controlled polymerization.     

Regioselective acylation of resveratrol catalyzed by lipase under microwave

The enzymatic regioselective acylation of resveratrol was achieved in organic solvents catalyzed by the lipase from Candida sp. 99–125 (CSL) under microwave irradiation. Influences of various reaction conditions have been studied. After selecting the optimum conditions [MTBE (20?ml, a_w?=?0.38), resveratrol (0.1?mmol), vinyl acetate (1.0?mmol) and CSL (100.0?mg) under microwave irradiation (35°C, 400 W)], CSL exhibited a satisfied enzyme activity (281?±?11?μmol/g/h) and yield of 75% for 4′-O-acetyl- resveratrol could be obtained in about 4?h when performing the reaction on a 25-fold-larger scale.

Schematic illustration of the enzymatic regioselective acylation of resveratrol catalyzed by the lipase from Candida sp. 99–125 (CSL) under microwave irradiation.     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene by a combination of cobalt‐mediated radical polymerization and atom transfer radical polymerization

Vinyl acetate and vinyl chloroacetate were copolymerized in the presence of a bis(trifluoro‐2,4‐pentanedionato)cobalt(II) complex and 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) at 30 °C, forming a cobalt‐capped poly(vinyl acetate‐co‐vinyl chloroacetate). The addition of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy after a certain degree of copolymerization was reached afforded 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(vinyl acetate‐co‐vinyl chloroacetate) (PVOAc–MI; number‐average molecular weight = 31,000, weight‐average molecular weight/number‐average molecular weight = 1.24). A ¹H NMR study of the resulting PVOAc–MI revealed quantitative terminal 2,2,6,6‐tetramethyl‐1‐piperidinyloxy functionality and the presence of 5.5 mol % vinyl chloroacetate in the copolymer. The atom transfer radical polymerization (ATRP) of styrene (St) was studied with ethyl chloroacetate as a model initiator and five different Cu‐based catalysts. Catalysts with bis(2‐pyridylmethyl)octadecylamine (BPMODA) or tris(2‐pyridylmethyl)amine (TPMA) ligands provided the highest initiation efficiency and best control over the polymerization of St. The grafting‐from ATRP of St from PVOAc–MI catalyzed by copper complexes with BPMODA or TPMA ligands provided poly(vinyl acetate)‐graft‐polystyrene copolymers with relatively high polydispersity (>1.5) because of intermolecular coupling between growing polystyrene (PSt) grafts. After the hydrolysis of the graft copolymers, the cleaved PSt side chains had a monomodal molecular weight distribution with some tailing toward the lower number‐average molecular weight region because of termination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 447–459, 2007     

Emulsion polymerization of vinyl acetate using iodine‐transfer and RAFT radical polymerizations

This study deals with control of the molecular weight and molecular weight distribution of poly(vinyl acetate) by iodine‐transfer radical polymerization and reversible addition‐fragmentation transfer (RAFT) emulsion polymerizations as the first example. Emulsion polymerization using ethyl iodoacetate as the chain transfer agent more closely approximated the theoretical molecular weights than did the free radical polymerization. Although ¹H NMR spectra indicated that the peaks of α‐ and ω‐terminal groups were observed, the molecular weight distributions show a relatively broad range (M_w/M_n = 2.2–4.0). On the other hand, RAFT polymerizations revealed that the dithiocarbamate 7 is an excellent candidate to control the polymer molecular weight (M_n = 9.1 × 10³, M_w/M_n = 1.48), more so than xanthate 1 (M_n = 10.0 × 10³, M_w/M_n = 1.89) under same condition, with accompanied stable emulsions produced. In the M_n versus conversion plot, M_n increased linearly as a function of conversion. We also performed seed‐emulsion polymerization using poly(nonamethylene L ‐tartrate) as the chiral polyester seed to fabricate emulsions with core‐shell structures. The control of polymer molecular weight and emulsion stability, as well as stereoregularity, is also discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Dispersion production by semi-continuous radical vinyl acetate emulsion polymerization with silane co-monomer and characterization of final products

Vinyl acetate radical emulsion polymerization in water with GF51 silane co-monomer was performed by semi continuous way. The GF51 impacts on dispersion rheology as well on films and bonding strength properties were determined. It should be stated that even low quantities of GF51 (up to 6% from VAc) determined high viscosity of dispersions. The GF51 modified films have low water absorption and high affinity to glass. Molecular mass and thermal properties of GF51 modified polymers were determined accordingly.     

“Living” radical polymerization of styrene catalyzed by cyclometalated ruthenium(II) complexes bearing nonlabile ligands

Cationic substitutionally inert cyclometalated ruthenium (II) and osmium (II) complexes, ([Mt(o‐C₆H₄‐2‐py)(LL)₂]PF₆), where LL‐1,10‐phenanthroline (phen) or 2,2′‐bipyridine (bipy), were used for radical polymerization of styrene. Gradual modification of the complexes within the series allowed comparison of the catalytic activity and the redox properties. There was no correlation between the reducing powers of the complexes and their catalytic activities. The osmium compound of the lowest reduction potential was not active. All the ruthenium complexes catalyzed the polymerization of styrene in a controlled manner; but the level of control and the catalytic activity were different under the same polymerization conditions. [Ru(o‐C₆H₄‐2‐py)(phen)₂]PF₆ demonstrated the best catalytic performance though its redox potential was the highest. It catalyzed the “living” polymerization with a reasonable rate at a catalyst‐to‐initiator ratio of 0.1. 1 equiv. of Al(OiPr)₃ accelerated the polymerization and improved the control, but higher amount of Al(OiPr)₃ did not speed up the polymerization and moved the process into the uncontrollable regime. Under the most optimal conditions, the controlled polymerization occurs fast without any additive and the catalyst degradation. Added free ligands inhibited the polymerization suggesting that the catalytically active ruthenium intermediates are generated via the reversible dechelation of bidentate phen or bipy ligands. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3814–3828, 2009     

Initiator‐fragment incorporation radical copolymerization of vinyl acetate and 1,2‐polybutadiene as a multivinyl monomer

The copolymerization of vinyl acetate (VAc) with 1,2‐polybutadiene (1,2‐PB; 85.5% 1,2‐units and 14.5% 1,4‐units) as a multivinyl monomer was carried out at 80 °C in dioxane with dimethyl 2,2′‐azobisisobutyrate (MAIB) at high concentrations (0.10–0.50 mol/L) as an initiator. The copolymerization of 1,2‐PB [0.80 mol/L (monomer unit)] and VAc (1.20 mol/L) with MAIB (0.30 mol/L) for 4 h proceeded homogeneously without gelation to yield a soluble copolymer. The resulting copolymer was divided into methanol‐ and n‐hexane‐insoluble parts, of which the yields based on the total weight of the comonomers and initiator were 46 and 20%, respectively. The methanol‐insoluble part consisted of the fractions of the 1,2‐PB units with (9 mol %) and without (39 mol %) an intact double bond, the 1,4‐PB unit (8 mol %), the VAc unit (32 mol %), and the methoxycarbonylpropyl group (12 mol %) as the MAIB fragment, whereas the hexane‐insoluble one was composed of the fraction of the 1,2‐PB units with (4 mol %) and without (17 mol %) a double bond, the 1,4‐PB unit (4 mol %), the VAc unit (60 mol %), and the methoxycarbonylpropyl group (15 mol %). The use of higher concentrations of 1,2‐PB and VAc and lower concentrations of MAIB resulted in gelation. The cast film from a chloroform solution of the methanol‐insoluble part contained spherical pores organized in a hexagonal way with a monodisperse pore size of 3 μm. The copolymer molecules seemed to be arranged in an ordered way on the surface layer of the pores, as shown by an optical microscopy image under crossed polarizers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2328–2337, 2006