Novel temperature-sensitive, β-cyclodextrin-incorporated poly(N-isopropylacrylamide) hydrogels for slow release of drug

Novel temperature-sensitive poly(N-isopropylacrylamide) hydrogels containing water-soluble -cyclodextrin polymer were prepared by forming semi-interpenetrating polymeric networks. Compared to the conventional poly(N-isopropylacrylamide) gel, the -cyclodextrin-incorporated hydrogels showed the same lower critical solution temperature due to the independence of the -cyclodextrin polymer in the networks. The release time of ibuprofen from the novel gel was significantly prolonged, which was presumably attributed to the formation of the inclusion complexes between the cyclodextrin groups and the drug molecules.Jian-Tao Zhang and Shi-Wen Huang have contributed equally to this work.     

Thermosensitive injectable hydrogels from poly(N-isopropylacrylamide)–dextran aqueous solutions: Thermogelation and drug release properties

Novel injectable thermosensitive hydrogel formulations with improved both water retention (WR) and drug release profile were prepared by adding dextran (DXT) to poly(N-isopropylacrylamide) (PNIPAM) aqueous solutions as a remedy against the demixing/syneresis phenomenon. The addition of the hydrophilic polysaccharide improved the WR of the hydrogel at 37°C from about 12% in the absence of DXT to about 40–55% out of the initial amount introduced, depending on both PNIPAM and DXT concentrations. Also, the 5-fluorouracil release experiments showed an appreciably reduced “burst effect” for the DXT-containing hydrogels. The shape of the release profiles revealed the presence of two stages, differing each other from the point of view of the drug release rate.     

“Smart” carboxymethylchitosan hydrogels crosslinked with poly(N-isopropylacrylamide) and poly(acrylic acid) for controlled drug release

Carboxymethylchitosan (CMC) hydrogels containing thermo-responsive poly(N-isopropylacrylamide) (poly(NIPAAm)) and pH-responsive poly(acrylic acid) (poly(AA)) were prepared via a free radical polymerization in the presence of hexamethylene-1,6-di-(aminocarboxysulfonate) crosslinking agents. A proper ratio of CMC to NIPAAm and AA used in the reaction was investigated such that the thermo- and pH-responsive properties of the hydrogels were obtained. Water swelling of the hydrogels was improved when the solution pH was in basic conditions (pH 10) or the temperature was below its lower critical solution temperature (LCST). Effects of the change in solution temperature and pH on water swelling properties of the hydrogel as well as the releasing rate of an entrapped drug were also investigated. The hydrogels were not toxic and showed antibacterial activity against Straphylococcus aureus (S. aureus). The pH- and thermo-responsive properties of this novel “smart” hydrogel might be efficiently used as dual triggering mechanisms in controlled drug release applications.     

An eco-friendly synthesis,characterization and antibacterial applications of novel almond gum – poly(acrylamide) based hydrogel silver nanocomposite

Polysaccharide based semi interpenetrating hydrogel (SIH) networks of cross-linked poly(acrylamide) was synthesised through an redox initiating free radical polymerization utilizing almond gum as a grafting backbone, N,N′– methylenebisacrylamide (MBA) as the cross-linker and ammonium persulphate (APS) – N,N,N′,N′-tetramethyl ethylenediamine (TEMED) as the redox initiator pair. Silver ions were introduced into the hydrogel matrix and silver nanoparticles of invariable size were developed insitu of the swollen hydrogel by the reduction of silver ions (Ag⁺) using azadirachta indica (neem) leaf extract. The prepared hydrogel - silver nanocomposite (HSN) was characterized by UV–visible diffused reflectance spectroscopy (DRS), fourier transform infrared spectroscopy (FT-IR), high resolution scanning electron microscopy (HR-SEM), energy dispersive X-ray analysis (EDX) and thermogravimetric analysis (TGA). The influence of pH on the swelling behavior of HSN was studied and the antibacterial activity of the developed nanocomposite was evaluated.     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

The synthesis, deprotection and properties of poly(γ-benzyl-l-glutamate)

Diethylamine, di-n-hexylamine, dicyclohexylamine and triethylamine have been used as initiators for the ring-opening polymerization of γ-benzyl-l-glutamate N-carboxyanhydride (BLG NCA) to synthesize poly(γ-benzyl-l-glutamate) (PBLG). The relationship between the molecular weight of PBLG and the molar ratio of monomer and initiator was studied. With dicyclohexylamine as initiator, the influence of monomer concentration, and reaction temperature and time on the polymerization of BLG NCA was examined. Three reagents were used for the deprotection of benzyl groups in PBLG, including hydrobromic acid/acetic acid (33 wt.%), NaOH aqueous solution and trimethylsilyl iodide (TMSI). Through examining the molecular weight of PLGA obtained using different deprotection methods, it was revealed that TMSI could minimize chain cleavage in the process of deprotection and retain the degree of polymerization. The biocompatibilities of PBLG obtained using different initiators were evaluated by a live/dead assay against L929 fibroblast cells. The in vitro cytotoxicities of PLGA obtained using different deprotecting agents were evaluated by a methyl thiazolyl tetrazolium assay. The results revealed that both PBLG and PLGA exhibited good biocompatibilities.     

Formation of hyaluronic acid–ellagic acid microfiber hybrid hydrogels and their applications

Microfiber assemblies prepared from ellagic acid (EA) were functionalized with histidine (His) and dispersed in hyaluronic acid (HA) hydrogel microstructures. Swelling studies indicated that the hybrids had a relatively lower water uptake compared to HA and was pH dependent. The percentage swelling ratio for EA–His–HA hybrids was 48 % when 0.04 mg/mL of HA was incorporated and increased to 70 % when 1.2 mg/mL HA was integrated. Release studies using the dye crystal violet (CV) as a model drug showed that the rates were concentration-dependent. Further the hybrids were found to be thermally stable compared to HA. Cellular toxicity assays performed with normal rat kidney (NRK) cells indicated biocompatibility and adherence of the hybrids to the cells. Thus, we have developed a new family of hybrid hydrogels which readily formed on the EA–His functionalized microfibers and may have potential applications in drug delivery or tissue regeneration applications.     

Synthesis,characterization, and solution behavior of well-defined double hydrophilic linear amphiphilic poly (N-isopropylacrylamide)-b-poly (ε-caprolactone)-b-poly (N-isopropylacrylamide) triblock copolymers

Well-defined linear dihydrophilic amphiphilic ABA-type triblock copolymers of ε-caprolactone (CL) and N-isopropylacrylamide (NIPAAm) have successfully been synthesized with a high yield by combining the ring opening polymerization (ROP) and xanthate-mediated reversible addition-fragmentation chain transfer (RAFT) polymerization methods. The resulted block copolymer shows the formation of micelles in water as supported by light scattering. The critical micelle concentration (cmc) value of the micelle increases with the increase in the chain length of the poly (N-isopropylacrylamide) (PNIPAAm) block. Cloud point of the block copolymers decreases with the decrease in the PNIPAAm chain length. The TGA analysis shows a one-step degradation and a lower thermal stability of the triblock copolymer than the PNIPAAm. The DSC analysis of the triblock copolymer shows the lowering of glass transition temperature (T _g), and melting temperature (T _m) peaks possibly due to the partial miscibility of the poly (ε-caprolactone) (PCL) block with the amorphous PNIPAAm block through the interaction of ester groups of PCL with the amide groups of PNIPAAm. The XRD pattern of the triblock copolymer shows a broad peak due to the suppression of the crystallization of PCL block owing to the mixing of PNIPAAm block with the PCL block.     

Synthesis of thermoresponsive polystyrene-based comb-type grafted poly(N-isopropylacrylamide)

Narrowly distributed polystyrene-g-p(N-isopropylacrylamide) (PSt-g-PNIPAM) was prepared by atom transfer radical polymerization (ATRP) of N-isopropylacrylamide using the brominated polystyrene as macroinitiator and CuCl combined with hexamethyltriethylenetetramine as catalyst. Fourier transform infrared (FT-IR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy confirmed the structure of PSt-g-PNIPAM. The gel permeation chromatography (GPC) showed that the graft copoly- mer had a single distribution peak with molecular weight, Mn (g/mol) of 19815 g/mol (using polystyrene as the standard). Differential scanning calorimetry (DSC) revealed that due to both effects of hydro- phobic isopropyl groups and hydrogen bonds in the amide group, the glass transition temperature (Tg) of PSt-g-PNIPAM enhanced 16.0 ℃ compared to the Tg of the polystyrene.     

Swelling–shrinking behaviors of poly(N-isopropylacrylamide) and poly(N-n-propylacrylamide) gels prepared by chemical and radiation crosslinking methods

The swelling and shrinking kinetics of thermosensitive gels based on N-isopropylacrylamide (NiPAAm) and N-n-propylacrylamide (NnPAAm) were studied. Four gels cylindrical in shape were prepared by two different methods: γ-ray irradiation to aqueous solutions of poly(NiPAAm) (PNiPAAm) or poly(NnPAAm) (PNnPAAm) and redox polymerization of NiPAAm or NnPAAm monomer using N,N′-methylenebisacrylamide as a crosslinker. There were a few differences in the swelling kinetics among these gels. However, a marked difference was observed in the shrinking processes, the rate of which was faster in the order of radiation-crosslinked PNiPAAm gel > radiation-crosslinked PNnPAAm gel > chemically crosslinked PNnPAAm gel > chemically crosslinked PNiPAAm gel. This difference was discussed in terms of the microscopic structure of the gels, which was studied by light scattering techniques. It was found that the static inhomogeneities frozen in the chemically and radiation-crosslinked gels play a key role in their shrinking kinetics.     

Synthesis and characterization of biodegradable pH-sensitive hydrogels based on poly(?-caprolactone), methacrylic acid, and poly(ethylene glycol)

In this work, a novel biodegradable pH-sensitive hydrogel based on poly(?-caprolactone) (PCL), methoxpoly(ethylene glycol) (MPEG) and methacrylic acid (MAA) was prepared by UV-initiated free radical polymerization. The resulting macromonomers and hydrogels were characterized by FTIR and/or ¹H NMR. Swelling behaviour and pH sensitivity of the hydrogels were studied in detail. With increase in pH of aqueous medium from 1.2 to 7.2, swelling ratio of the hydrogels increased accordingly. The hydrolytic degradation behaviour was also investigated. The prepared biodegradable pH-sensitive hydrogel based on PCL, MPEG, and MAA might have great potential application in smart drug delivery system.     

Amphiphilic poly(oxazoline)s – synthesis and application for micellar catalysis

Homogeneous and heterogeneous catalytic processes compete on industrial scale for more then three decades [1]. The advantages of homogeneous catalysis are beside others high activity, mild reaction conditions, high selectivity and no diffusion problems. The disadvantages of such systems include difficulties with recycling of the catalyst and product separation [2].     

Carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC) based hydrogels: synthesis and characterization

A novel carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC)-based hydrogel with sensitivity to environmental changes, pH and salts was synthesized by using fumaric acid and malic acid at various concentrations. Water uptake capacity of hydrogels was investigated in distilled water, various salt and pH solutions. From pH-dependent studies, it was found that greater water uptake values were observed at greater pH values (7.4), and reversible pH responsiveness of CMC–HEC based hydrogels was obtained. Decreasing the water uptake capacity with increasing of the charge of the metal cation (Al³⁺ < Ca²⁺ < Na⁺) demonstrated metal ion responsiveness of CMC–HEC-based hydrogels. From tensile tests of the hydrogels, a greater crosslinker concentration led to greater tensile strength values. Thermogravimetric analysis and scanning electron microscopy images were used to determine the thermal stability and to observe morphological properties of the samples, respectively.     

Perovskite-related oxynitrides – Recent developments in synthesis,characterisation and investigations of physical properties

Since the first investigations of perovskite type oxynitrides with the generalised composition ABO_3?xN_x about twenty years ago, these compounds have become of growing interest. The incorporation of nitride ions in the perovskite lattice results in distinct changes in the electronic structure leading to unusual physical properties. In this article we report on new synthesis techniques, different analytical methods, progress in the structural characterisation by comprehensive diffraction techniques and local spectroscopic methods like XAS and NMR as well as state of the art theoretical investigations. Various physical characteristics like electrical and thermal transport parameters and dielectric properties are described. The thermal and chemical stability of oxynitride perovskites are investigated and their applications in different photocatalytic reactions are discussed.     

Sol–gel derived organic–inorganic hybrid materials: synthesis,characterizations and applications

Organic/inorganic hybrid materials prepared by the sol–gel approach have rapidly become a fascinating new field of research in materials science. The explosion of activity in this area in the past decade has made tremendous progress in both the fundamental understanding of the sol–gel process and the development and applications of new organic/inorganic hybrid materials. Polymer-inorganic nanocomposite present an interesting approach to improve the separation properties of polymer material because they possess properties of both organic and inorganic such as good permeability, selectivity, mechanical strength, and thermal and chemical stability. Composite material derived by combining the sol–gel approach and organic polymers synthesis of hybrid material were the focus area of review It has also been demonstrated in this review that a more complete understanding of their structure–property behavior can be gained by employing many of the standard tools that are utilized for developing similar structure–property relationships of organic polymers. This review article is introductory in nature and gives introduction to composite materials/nanocomposite, their applications and the methods commonly employed for their synthesis and characterization. A brief literature survey on the polysaccharide templated and polysaccharide/protein dual templated synthesis of silica composite materials is also presented in this review article.     

Novel hybrid materials based on poly (4,4′-Diaminodiphenyl sulfone) and TiO2 nanoparticles: synthesis,characterization, physical and electrochemical properties

Research on Chemical Intermediates - Innovative hybrid composites based on poly (4,4'-Diaminodiphenyl sulfone) (PDDS) and TiO2 nanoparticles have been synthesized. The samples have been...     

Preparation and polymerization mechanism of dihydroxy-capped PCL,poly(CL-b-PEG-b-CL) and poly(DTC-b-CL-b-DTC)

PCL possesses a wide range of medical applications, such as tissue engineering and controlled drug release, because of its good biodegradability and miscibility. In order to extend the use of PCL, researchers have been exploring its structural and chemica…     

Bioimaging mass spectrometry of trace elements – recent advance and applications of LA-ICP-MS: A review

Bioimaging using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) offers the capability to quantify trace elements and isotopes within tissue sections with a spatial resolution ranging about 10–100 μm. Distribution analysis adds to clarifying basic questions of biomedical research and enables bioaccumulation and bioavailability studies for ecological and toxicological risk assessment in humans, animals and plants. Major application fields of mass spectrometry imaging (MSI) and metallomics have been in brain and cancer research, animal model validation, drug development and plant science. Here we give an overview of latest achievements in methods and applications. Recent improvements in ablation systems, operation and cell design enabled progressively better spatial resolutions down to 1 μm. Meanwhile, a body of research has accumulated covering basic principles of the element architecture in animals and plants that could consistently be reproduced by several laboratories such as the distribution of Fe, Cu, Zn in rodent brain. Several studies investigated the distribution and delivery of metallo-drugs in animals. Hyper-accumulating plants and pollution indicator organisms have been the key topics in environmental science. Increasingly, larger series of samples are analyzed, may it be in the frame of comparisons between intervention and control groups, of time kinetics or of three-dimensional atlas approaches.