Discussion of the Drop Rest Phenomenon at Millimeter Scale and Coalescence of Droplets at Micrometer Scale

Adsorption of surfactants at water-oil interfaces is of great importance in the coalescence of drops and stability of emulsions. In this work, we have studied the adsorption of nonionic surfactants Span 80 at water-oil interfaces and its influence on the drop rest phenomenon and W/O emulsion stability in a pulsed DC electrical field. The variation of interfacial tension with the concentration of surfactant was studied and the data were fitted using a surface equation of state derived from the Langmuir adsorption isotherm. A stochastic model for coalescence was used to fit the coalescence time distributions. The significance of the model parameters was discussed. The stability of the emulsion was evaluated by conductivity methods. The researches in this article indicated that both of the rest time distribution of the drops at the interface and stability of the emulsion in the electrical field was significantly affected by surfactant concentration.     

High- and low-molecular-weight lignosulfonates and Kraft lignins as oil/water-emulsion stabilizers studied by means of electrical conductivity

Electrical conductivity measurements were used to study the creaming rates in oil/water emulsions stabilized with five lignosulfonates and one Kraft lignin. The creaming process resulted in a narrow dispersion band separating the water-rich and the oil-rich phases. An electrode was designed to follow this zone in the emulsion as a function of time. This makes it possible to calculate the amount of water separated from the emulsion directly from the creaming profiles. The stability concerning creaming was also evaluated with data obtained from visual inspection. Equivalent creaming profiles indicate that the electrode design used is suitable for stability measurements in the systems examined. Droplet interaction in diluted emulsions was studied with video-enhanced microscopy. Received: 10 September 1998 Accepted in revised form: 18 December 1998     

Effect of Emulsifier Type on the Characterization of O/W Emulsions Using a Spectroscopy Technique

The droplet size distribution (DSD) of emulsions is the result of two competitive effects that take place during emulsification process, i.e., drop breakup and drop coalescence, and it is influenced by the formulation and composition variables, i.e., nature and amount of emulsifier, mixing characteristics, and emulsion preparation, all of which affect the emulsion stability. The aim of this study is to characterize oil-in-water (O/W) emulsions (droplet size and stability) in terms of surfactant concentration and surfactant composition (sodium dodecyl benzene sulphonate (SDBS)/Tween 80 mixture). Ultraviolet-visible (UV-vis) transmission spectroscopy has been applied to obtain droplet size and stability of the emulsions and the verification of emulsion stability with the relative cleared volume technique (time required for a certain amount of emulsion to separate as a cleared phase). It is demonstrated that the DSD of the emulsions is a function of the oil concentration and the surfactant composition with higher stability for emulsions prepared with higher SDBS ratio and lower relative cleared volume with the time. Results also show that smaller oil droplets are generated with increasing Tween 80 ratio and emulsifier concentration.     

Effect of Inorganic Solids,Wax to Asphaltene Ratio,and Water Cut on the Stability of Water-in-Crude Oil Emulsions

The formation of stable water-in-crude oil emulsions during petroleum production and refinery may create sever and costly separation problems. It is very important to understand the mechanism and factors contributing to the formation and stabilization of such emulsions for both great economic and environmental development. This article investigates some of the factors controlling the stability of water-in-crude oil emulsions formed in Burgan oil field in Kuwait. Water-in-crude oil emulsion samples collected from Burgan oil filed have been used to separate asphaltenes, resins, waxes, and crude oil fractions. These fractions were used to prepare emulsion samples to study the effect of solid particles (Fe₃O₄) on the stability of emulsions samples. Results indicate that high solid content lead to higher degree of emulsion stability. Stability of emulsion samples under various waxes to asphaltenes (W/A) ratios have also been tested. These tests showed that at low W/A content, the emulsions were very stable. While at a wax to asphaltene ratio above 1 to 1, the addition of wax reduced emulsion stability. Stability of emulsion samples with varying amount of water cut has also been investigated. Results indicated that stability and hence viscosity of emulsion increases as a function of increasing the water cut until it reaches the inversion point where a sharp decline in viscosity takes place. This inversion point was found to be approximately at 50% water cut for the crude oils considered in this study.     

A novel formulation of the pickering emulsion stabilized with silica nanoparticles and its thermal resistance at high temperatures

Stabilization of emulsions with solid particles can be used in several fields of oil and gas industry because of their higher stability. Solid particles should be amphiphilic to be able to make Pickering emulsions. This goal is achieved by using surfactants at low concentrations. Oil-in-water (o/w) emulsions are usually stabilized by surfactant but show poor thermal stability. This problem limits their applications at high-temperature conditions. In this study, a novel formulation for o/w stabilized emulsion by using silica nanoparticles and the nonionic surfactant is investigated for the formulation of thermally stable Pickering emulsion. The experiments performed on this Pickering emulsion formula showed higher thermal stability than conventional emulsions. The optimum wettability was found for DME surfactant and silica nanoparticles, consequently, in that region; Pickering emulsion showed the highest stability. Rheological changes were evaluated versus variation in surfactant concentration, silica concentration and pH. Scanning electron microscopy images approved the existence of a rigid layer of nanoparticle at the oil-water interface. Finally, the results show this type of emulsion remains stable in harsh conditions and allows the system to reach its optimum rheology without adding any further additives.     

Interface composition of multiple emulsions: rheology as a probe

We have investigated the dynamic rheological properties of concentrated multiple emulsions to characterize their amphiphile composition at interfaces. Multiple emulsions (W1/O/W2) consist of water droplets (W1) dispersed into oil globules (O), which are redispersed in an external aqueous phase (W2). A small-molecule surfactant and an amphiphilic polymer were used to stabilize the inverse emulsion (W1 in oil globules) and the inverse emulsion (oil globules in W2), respectively. Rheological and interfacial tension measurements show that the polymeric surfactant adsorbed at the globule interface does not migrate to the droplet interfaces through the oil phase. This explains, at least partly, the stability improvement of multiple emulsions as polymeric surfactants are used instead of small-molecule surfactants.     

SEMICONTINUOUS EMULSION POLYMERIZATION OF VINYL ACETATE X. KINETICS OF HOMOPOLYMERIZATION,CO POLYMERIZATION,AND INITIATOR DECOMPOSITION IN THE PRESENCE OF SULFOSUCCINATE-TYPE SURFACTANTS

ABSTRACT

Miorocrystalline cellulose stabilized emulsions (o/w) were evaluated by means of brightfield and polarized light microscopy, freeze-etch electron microscopy, droplet size analyses and rheologic measurements. These studies indicated that miorocrystalline cellulose (Avicel RC591 ) forms a network around emulsified oil droplets. This structure provides a mechanical barrier at the o/w interface which stabilizes the emulsion without the necessity for decreasing interfacial tension, as in conventional surfactant-stabilized emulsions. Rheologic studies indicated that emulsions containing Avicel RC591 had a considerable degree of thlxotropy which contributed to their stability. When Tween 80 was incorporated in this system, oil droplets coalesced indicating that the stability of the emulsion was affected adversely.     

Interfacial properties of emulsions stabilized with surfactant and nonsurfactant coated boehmite nanoparticles

The properties of emulsions stabilized with surface-modified boehmite particles of 26 and 8 nm in diameter have been investigated. The surface-modified particles were prepared by mixing aqueous dispersions of cationic boehmite particles with aqueous solutions of the surfactant p-dodecylbenzenesulfonic acid (DBSA) or the nonsurfactant p-toluenesulfonic acid (TSA). For the 26 nm particles, interfacial tension measurements indicate that p-dodecylbenzenesulfonic acid partitions between the particle surface and the oil-water interface, while p-toluenesulfonic acid remains on the particle surface. The partitioning of p-dodecylbenzenesulfonic acid supports the formation of emulsions, although in the absence of the particles the same surfactant concentration is not sufficient for emulsion stabilization. Due to the fast exchange kinetics, p-dodecylbenzenesulfonic acid is gradually replaced by particles. At equilibrium, the interfacial tension in the presence of the surface-modified particles is between the values for the pure particles and the pure surfactant solutions. However, the interfacial tension is independent of the surfactant concentration used in the preparation of the particles. Reducing the particle size to 8 nm leads to increased emulsion stability, and thus, the minimum particle concentration required to prepare stable emulsions was reduced to 0.1 g/L. However, above approximately 3.5 mmol/L of the sulfonic acids, the small particles dissolve slowly, and the emulsion stability is lost. This mechanism can be used to trigger the collapse of the emulsions.     

Synthesis and Characterization of Conductive Polypyrrole/Montmorillonite Nanocomposites via One-pot Emulsion Polymerization

A series of electrically conductive polypyrrole/clay nanocomposites were synthesized in this work by using one-pot emulsion oxidative polymerization of pyrrole in the presence of unmodified clay and using DBSNa as the surfactant. The effect of surfactant on the morphological and electrical properties of PPy also were investigated and discussed in some extent. Electrical conductivity of the samples was measured by using samples in which the conductive materials was sandwiched between two Ni electrodes at room temperature. PPy/MMT nanocomposites were characterized by using XRD, TEM, TGA and DSC means of investigation. Intercalated structures were determined for the nanocomposites as confirmed by XRD and TEM studies. Electrical conductivity of the nanocomposites was measured to be dependent to the clay content, and the methods of preparation. Measurement also showed that polymerization of pyrrole monomers pre-intercalated between the clay gallery spaces of the clay led to higher conductivity for the nanocomposite in the same level of clay content. Thermal property measurements showed a lower thermal decomposition rate for the PPy/MMT nanocomposites with respect to the PPy.     

Improved formulation of W/O/W multiple emulsion for insulin encapsulation. Influence of the chemical structure of insulin

W/O/W multiple emulsions are systems of potential interest in the oral administration of insulin. Although it has been shown that a single oral administration of insulin-loaded W/O/W multiple emulsion to diabetic rats led to the significant decrease of blood glucose levels (Silva Cunha et al., 1998, Int J Pharm 169:33), repeated administrations displayed unpleasant side effects such as diarrhoea and steatosis. These unwanted effects were attributed to the high oil concentration used for their preparation. In the present study, attention was focused on the reduction of oil concentration in the formulation of these systems and on the encapsulation of two different insulins. The physical properties and stability of the multiple emulsions over long periods of time were assessed by conductivity measurements, and granulometric and microscopic analyses. The encapsulation in the inner aqueous phase of two insulins, Umulin and Humalog, differing only by the transposition of one amino acid, had non-negligible effects on the formation and stability of W/O/W multiple emulsions. Both insulins were shown to improve the formation of the multiple emulsions. Circular dichroism studies and surface tension measurements evidenced the contribution of insulin conformation and surface properties in multiple emulsion formation and stability.     

FLOW PROPERTIES OF WEATHERED CRUDE OILS AND THEIR EMULSIONS

The present paper proposes the emulsification of weathered crude oils in water as a competitive and cost effective method for reducing their viscosities. Weathered crude oil samples were collected from major Kuwaiti oil lakes. Emulsion preparation involved using, either a nonionic surfactant or alkali, as well as both alkali and fatty acid. The obtained emulsions were characterized by measuring the droplet size distribution of the dispersed phase using optical microscopy. Emulsion stability was also examined in terms of the system breakdown. The rheological properties were measured using a concentric cylinder rotary rheometer. The emulsion rheological behavior has been studied as a function of composition, temperature, and shear rate. A constitutive model was developed to characterize the pseudoplastic behavior of the crude oil and the emulsion systems. The model fitted well the experimental results with a correlation coefficient higher than 95%. Associated with the pseudoplastic behavior, viscoelastic behavior has been observed with emulsions and some oils at high shear rates.

The results of this investigation indicated that the examined weathered crude oils can be transported through pipelines as emulsions of up to 80 vol.% oil concentrations. The proposed method of treatment with NaOH and oleic acid offers several advantages over the surfactant treatment. It exhibited comparable rheological behavior at lower cost and less mixing energy. It also provided higher emulsion stability, which favors oil transportation for longer distances.     

Influence of pH on the stability of oil-in-water emulsions stabilized by a splittable surfactant

A laboratory study was conducted to evaluate the effect of pH on the stability of oil-in-water emulsions stabilized by a commercial splittable surfactant Triton SP-190 by comparison with the results obtained by a common surfactant Triton X-100. The emulsion stability was explored by measuring the volume of oil phase separated and the size of the dispersed droplets. It was found that the addition of inorganic acids did not significantly affect the stability of emulsions stabilized by Triton X-100, but had a profound influence on the stability of emulsions stabilized by Triton SP-190. Moreover, the droplet size of a Triton X-100-stabilized emulsion and its dynamic interfacial activity were insensitive to acids. However, at lower pH the droplet size of the emulsions stabilized by Triton SP-190 was considerably increased. From the dynamic interfacial tension measurements the dynamic interfacial activity of Triton SP-190 at the oil/water interface was found to be strongly inhibited by the addition of acids, resulting in a slower decreasing rate of dynamic interfacial tension. The results demonstrate that the dramatic destabilization of Triton SP-190-stabilized emulsions could be realized by the use of acids, which evidently changed the interfacial properties of the surfactant and resulted in a higher coalescence rate of oil droplets.     

三元复合驱碱/表面活性剂/聚合物模拟原油乳状液稳定动力学特性

基于两相分离的乳状液稳定模型,研究了三元复合驱模拟原油乳状液稳定动力学特性;通过液膜强度和油水界面张力探讨了碱/表面活性剂/聚合物对模拟原油乳状液稳定动力学特性的影响机理。 结果表明,乳状液稳定模型可以很好的评价乳状液的稳定性,并得到乳状液的稳定动力学特性;碱浓度小于900 mg/L有利于乳状液的稳定,碱浓度大于900 mg/L不利于乳状液的稳定;表面活性剂和聚合物浓度的增加使得形成的模拟原油乳状液更加稳定;模拟原油乳状液的稳定作用主要是通过碱、表面活性剂降低油水界面张力并增加油水界面膜强度,聚合物通过提高界面膜强度实现的,三者存在协同效应。     

Effect of cetyltrimethylammonium bromide addition on the emulsions stabilized by montmorillonite

The wettability of montmorillonite could be in situ modified by cationic surfactant cetyltrimethylammonium bromide (CTAB). The type and stability of emulsions prepared from montmorillonite with different concentrations of cationic surfactant were investigated, and a double phase inversion of emulsions was observed. The adsorption of CTAB on montmorillonite particles was studied by surface tension and zeta potential measurements, and the variation of the wettability of particles with the concentration of CTAB was characterized by the contact angle measurements. The adsorption of particles at the surface of emulsion droplets was observed by laser-induced confocal scanning microscopy. At low surfactant concentrations, the adsorption of CTAB on montmorillonite increased the hydrophobicity of the particles, and the stability of oil-in-water emulsions was enhanced. With the increase of the CTAB concentration, montmorillonite particles changed from hydrophilic to hydrophobic, and water-in-oil emulsions were obtained. However, at higher surfactant concentrations, the emulsions inverts to O/W again because montmorillonite particles were reconverted into hydrophilic due to the formation of CTAB bilayer on the surface of montmorillonite.     

Morphologies of three-phase emulsions of the ternary nonionic amphiphile/oil/water systems and their determination by electrical method

Equations have been developed for the electrical and thermal conductivities of dispersions of two different phases of low conductivity in a third, conductive phase. These equations predict the conductivity of the dispersion from the volume fractions and conductivities of the constituent phases. Electrical conductivity measurements on dispersions of three liquid phases, i.e., three-phase emulsions, were made over a wide range of volume fractions of each dispersed phase and used to test the equations. The equations predict accurately dispersion conductivities from the measured volume fractions and conductivities of the constituent phases without any adjustable parameters. The predicted values are in excellent agreement with the measured conductivities of three-phase emulsions in the nonionic amphiphile/oil/water systems. This leads to the determination of three-phase emulsion morphologies. When the ratio Kd of the emulsion-drop conductivity to the continuous phase conductivity is O(10(-1)) 相似文献   

Synergetic Effect of Reactive Surfactants and Clay Particles on Stabilization of Nonaqueous Oil-in-Oil (o/o) Emulsions

Although surfactants and particles are often used together in stabilization of aqueous emulsions, the contribution of each species to such stabilization at the oil-water interface is poorly understood. The situation becomes more complicated if we consider the nonaqueous oil-oil interface, i.e, the stabilization of nonaqueous oil-in-oil (o/o) emulsions by solid particles and reactive surfactants which, to our knowledge, has not been studied before. We have prepared Pickering nonaqueous simple (o/o) emulsions stabilized by a combination of kaolinite particles and a nonionic polymerizable surfactant Noigen RN10 (polyoxyethylene alkylphenyl ether). Different pairs of immiscible oils were used which gave different emulsion stabilities. Using kaolinite with equal volumes of paraffin oil/formamide system gave no stable emulsions at all concentrations while the addition of Noigen RN10 enhanced the emulsion stability. In contrast, addition of Noigen RN10 surfactant to silicon oil-in-glycerin emulsions stabilized by kaolinite resulted in destabilization of the system at all concentrations. For all systems studied here, no phase inversion in simple emulsion was observed by altering the volume fraction of the dispersed phase as compared to the known water-based simple Pickering emulsions.      

Factors in the Single-Step Bulk Process Preparation of a Triple Janus Emulsion

Some factors in the preparation of triple Janus emulsions in a single-step bulk process were investigated using optical microscopy. The emulsions consisted of water, O.097 weight fraction, a commercial surfactant, Tween 80, 0.03 weight fraction, a vegetable oil (VO), 0.18 weight fraction, and a silicone oil (SO), 0.72 weight fraction. A surprising connection was found between the state of the compounds prior to mixing and the final morphology as well as stability of the emulsion. Separately adding the compounds or with the surfactant dissolved in the vegetable oil, prior to mixing, did not result in a Janus emulsion. Instead, simpler emulsions with limited stability were attained even with prolonged mixing. Storing the compounds together without mixing for two days followed by mixing resulted in a Janus emulsion in which the (VO + SO)/W/VO drops were more sparsely populated with Janus drops, and emulsion stability was limited. Finally, preparing the emulsion from the aqueous surfactant solution and the two oils gave a (VO + SO)/W/VO/SO emulsion with the W drops heavily populated by Janus drops and with improved stability.      

DETERMINATION OF LONG-TERM STABILITY OF VITAMIN E EMULSION AND FORMATION OF MICROEMULSIONS BY USING LASER LIGHT SCATTERING AND UV ABSORPTION MEASUREMENTS

This paper presents methods of determining the long-term stability of vitamin E emulsion and formation of microemulsions. Several emulsion systems formed by using anionic, zwitterionic and cationic surfactants have been studied in the presence and absence of NaCI. Several conclusions can be drawn: (1) by using UV absorption and particle size measurements, one may be able to predict the long-term stability of an emulsion or the possibility of forming a microemulsion by measuring the initial properties of an emulsion, (2) in order to form a stable vitamin E emulsion or microemulsion, the initial properties of the emulsion should have the following features : (a) the particle size is ≤ 200 nm, (b) the surfactant system has a saturation value ≥ 1 and (c) the surfactant system can dissolve a substantial amount of vitamin E without causing an increase of the emulsion droplet size and (3) the saturation value and the stability of many vitamin E emulsion systems can be increased by adding an optimum amount of NaCI.     

Jojoba Oil/Water Emulsions Stabilized by BSA and Egg Proteins: A Study Using Conductivity Technique

Stability of jojoba oil/water emulsion systems was investigated using the conductivity technique. Egg white, egg yolk, and bovine serum albumin (BSA) proteins were used as emulsifiers. Stability of above emulsions was investigated using several protein concentrations (0.05–0.50 mg/ml) and several oil volume fractions, OVF, (0.25; 0.50). It was concluded from the results that the investigated emulsions stability, when using BSA, was higher than when using egg white or egg yolk. In addition, emulsion stability did not show a strong dependence on OVF, except at the higher protein concentration of 5.0 mg/ml, where ES increased significantly with increasing OVF. Finally, emulsifier activity was found to increase with increasing OVF.     

An alkyl polyglucoside-mixed emulsifier as stabilizer of emulsion systems: the influence of colloidal structure on emulsions skin hydration potential

To be considered as a suitable vehicle for drugs/cosmetic actives, an emulsion system should have a number of desirable properties mainly dependent on surfactant used for its stabilization. In the current study, C(12-14) alkyl polyglucoside (APG)-mixed emulsifier of natural origin has been investigated in a series of binary (emulsifier concentration 10-25% (w/w)) and ternary systems with fixed emulsifier content (15% (w/w)) with or without glycerol. To elucidate the systems' colloidal structure the following physicochemical techniques were employed: polarization and transmission electron microscopy, X-ray diffraction (WAXD and SAXD), thermal analysis (DSC and TGA), complex rheological, pH, and conductivity measurements. Additionally, the emulsion vehicles' skin hydration potential was tested in vivo, on human skin under occlusion. In a series of binary systems with fixed emulsifier/water ratios ranging from 10/90 to 25/75 the predominance of a lamellar mesophase was found, changing its character from a liquid crystalline to a gel crystalline type. The same was observed in gel emulsions containing equal amounts of emulsifier and oil (15% (w/w)), but varying in glycerol content (0-25%). Different emulsion samples exhibited different water distribution modes in the structure, reflecting their rheological behavior and also their skin hydration capacity.