Copolymerization of ethylene and norbornene using cyclopentadienylzirconium trichloride activated by isobutyl‐modified methylaluminoxane

The copolymerization of ethylene (E) and norbornene (NB) was investigated using the commercially available and inexpensive catalyst system, cyclopentadienylzirconium trichloride (CpZrCl₃)/isobutyl‐modified methylaluminoxane (MMAO), at a moderate polymerization temperature in toluene. For the CpZrCl₃ catalyst system activated by aluminoxane with a 40 mol % methyl group and a 60 mol % isobutyl group (MMAO), the quantities of the charged NB and the polymerization temperature significantly affected the molecular weights, polydispersities, and NB contents of the obtained copolymers and the copolymerization activities in all the experiments. As the charged NB increased and thereby the NB/E molar ratio increased, the NB content in the copolymer increased and reached a maximum value of 71 mol %. The CpZrCl₃/MMAO ([Al]/[Zr] = 1000) catalyst system with the [NB] of 2.77 mol L^?1 and ethylene of 0.70 MPa at 50 °C showed the highest activity of 1690 kg mol_Zr^?1 h^?1 and molecular weight of 21,100 g mol^?1. The ¹³C NMR analysis showed that the CpZrCl₃/MMAO catalyst system produced the E‐NB random copolymer with a number of NB homosequences such as the NN dyad and NNN triad. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7411–7418, 2008     

High norbornene incorporation in ethylene-norbornene copolymerization with a bis(α-alkyloxoimine) titanium-MAO catalyst

A novel bis(α-alkyloxoimine) titanium(IV) complex was synthesized and used as a catalyst precursor to catalyze homo- and copolymerization of ethylene and norbornene. The titanium complex activated with methylalumoxane exhibits good activities for the homopolymerizations of ethylene and norbornene under high temperature to produce high-molecular-weight linear polyethylene and vinyl-type polynorbornene, respectively. Ethylene-norbornene copolymers with high molecular weight can also be produced by this catalyst. The incorporation of norbornene from 0 to 76 mol% in the copolymers can be controlled by varying the charged norbornene. ¹³C NMR analyses show that the microstructures of the ethylene-norbornene copolymers with low norbornene incorporation are predominantly alternated and isolated norbornene units, while those with high norbornene incorporation are random polymers containing long norbornene sequences.     

Copolymerization of norbornene with methoxycarbonylnorbornene catalyzed by Ni{CF3C(O)CHC[N(naphthyl)]CH3}2/B(C6F5)3 catalytic system and good processability for Dry/Wet phase inversion and electrospinning technique

Copolymerization of norbornene (NB) with methoxycarbonylnorbornene (NB‐COOCH₃) was carried out with catalytic system of Ni{CF₃C(O)CHC[N(naphthyl)]CH₃}₂ and B(C₆F₅)₃ in toluene. The catalytic system exhibited higher activity 2.69 × 10⁵ (gpolymer/mol Ni h) for copolymerization of norbornene and methoxycarbonylnorbornene. The influence results of the comonomer feed content on the polymerization showed that the NB‐COOCH₃ has a very high insertion ratio in all copolymers, and the NB‐COOCH₃ content in copolymers can be controlled to be 7.9–77.6 mol % at content of 10–90 mol % of the NB‐COOCH₃ in the monomer feeds ratios. The reactivity ratios, r_NB‐COOCH3 = 0.578 and r_NB = 0.859, were determined by the Kelen–TÜdÕs method. Copolymers were processed by solution casting method, dry/wet phase inversion technique, and electrospinning. The films prepared by solution casting method showed good transparency in the visible region. The membranes processed by dry/wet phase inversion technique were microporous structures. The fibers diameters fabricated by electrospinning were about 3 μm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of highly thermostable norbornene‐isoprene‐1‐octene terpolymer with titanium catalyst

Terpolymerization of norbornene (NB), isoprene (IP), and 1‐octene was achieved by using fluorenylamido‐ligated titanium catalyst, which showed very high activity for the copolymerization of NB and various α‐olefins. The content of IP in the terpolymer was controlled by the feed ratio and reaction temperature up to 7 mol %. The incorporated IP was mainly inserted in 1,4‐addition. The polymer was dissolved into common solvents such as toluene and chloroform, which enabled the preparation of a transparent film by solution casting process. The degradation temperature of the terpolymer was comparable with other cyclic olefin copolymers and the glass transition temperature (T_g) was higher than that of NB‐1‐octene copolymer with almost the same NB content. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2136–2140     

Homo‐ and copolymerization of norbornene with styrene catalyzed by a series of copper(II) complexes in the presence of methylaluminoxane

Vinyl‐type polymerization of norbornene as well as random copolymerization of norbornene with styrene was studied using a series of copper complexes‐MAO. The precatalysts used here are copper complexes with β‐ketoamine ligands based on pyrazolone derivatives and the molecular structure of complex 4 was determined using X‐ray analysis. All of these catalyst systems are moderately active for the vinyl‐type polymerization of norbornene and random copolymerization of norbornene with styrene. The random copolymers obtained suggest that only one type of active species is present. Gel permeation chromatography (GPC) and NMR indicate that the copolymers are ‘true’ copolymers. The copolymerization reactivity ratios (r_NBE = 20.11 and r_Sty = 0.035) indicate a much higher reactivity of norbornene, which suggests a coordination polymerization mechanism. The solubility and processability of the copolymers are improved relative to polynorbornene and the thermostability of the copolymers is improved relative to polystyrene. Copyright © 2006 John Wiley & Sons, Ltd.     

Alternating,gradient, block,and block–gradient copolymers of ethylene and norbornene by Pd–Diimine‐Catalyzed “living” copolymerization

We demonstrate, in this article, the facile synthesis of a broad class of low‐polydispersity ethylene–norbornene (E–NB) copolymers having various controllable comonomer composition distributions, including gradient, alternating, diblock, triblock, and block–gradient, through “living”/quasiliving E–NB copolymerization facilitated with a single Pd – diimine catalyst ( 1 ). This synthesis benefits from two remarkable features of catalyst 1 , its high capability in NB incorporation and high versatility in rendering E–NB “living” copolymerization at various NB feed concentrations ([NB]₀) while under an ethylene pressure of 1 atm and at 15 °C. At higher [NB]₀ values between 0.42 and 0.64 M, E–NB copolymerization with 1 renders nearly perfect alternating copolymers. At lower [NB]₀ values (0.11–0.22 M), gradient copolymers yield due to gradual reduction in NB concentration, with the starting chain end containing primarily alternating segments and the finishing end being hyperbranched polyethylene segments. Through two‐stage or three‐stage “living” copolymerization with sequential NB feeding, diblock or triblock copolymers containing gradient block(s) have been designed. This work thus greatly expands the family of E–NB copolymers. All the copolymers have controllable molecular weight and relatively low polydispersity (with polydispersity index below 1.20). Most notably, some of the gradient and block–gradient copolymers have been found to exhibit the characteristic broad glass transitions as a result of their possession of broad composition distribution. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polymerization of norbornene with a pendent sulfonyl fluoride group catalyzed by palladium complex bearing tBu3P ligand

The combination of palladium complex (^tBu₃P)Pd(Me)Cl ( 1 ) and NaB[3,5‐(CF₃)₂C₆H₃]₄ (NaBAr₄) catalyzed homopolymerization of a novel monomer, norbornene (NB) with a pendent 2‐fluorosulfonyltetrafluoroethoxymethyl chain (NBSF). Catalytic activities of 1 /NaBAr₄ were higher than those of previously reported palladium or nickel catalysts, probably, because the palladium center with electron donative ^tBu₃P ligand was barely poisoned by the sulfonyl fluoride coordination. Thus, 1 /NaBAr₄ is the current best catalyst system for NBSF polymerization. The catalyst system also gave copolymers of NB with NBSF. The obtained copolymers have high sulfonyl‐fluoride incorporation and a narrow molecular weight distribution. Present catalyst system could control incorporation ratio of NBSF by changing a feed monomer ratio with slow addition of NB solution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5133–5141, 2008     

Influence of the catalyst on monomer insertion in the syndiospecific copolymerization of styrene and para‐methylstyrene

The effect of the kind of transition‐metal catalyst on the extent of comonomer insertion in the syndiospecific complex‐coordinative copolymerization of styrene and para‐methylstyrene has been investigated. The results for the influence of the polymerization conditions have shown that there is no real difference between solution copolymerization in toluene and solvent‐free styrene copolymerization in bulk, with respect to the reactivity ratio for para‐methylstyrene (r₂), under comparable conditions in the presence of methylaluminoxane and triisobutylaluminum and at low polymerization conversions. All the investigated catalysts lead to a preferred incorporation of para‐methylstyrene into the polymer chain in comparison with styrene and over the whole range of monomer compositions. The increasing capability of the different catalysts to provide copolymers with enhanced para‐methylstyrene concentrations can be summarized by the increasing r₂ values for the copolymerization in bulk as follows: η⁵‐pentamethylcyclopentadienyl titanium trichloride < η⁵‐octahydrofluorenyl titanium trimethoxide < η⁵‐octahydrofluorenyl titanium tristrifluoroacetate < η⁵‐cyclopentadienyl titanium(N,N‐dicyclohexylamido)dichloride < η⁵‐cyclopentadienyl titanium trichloride. For a correlation between the catalyst structure and the comonomer insertion, the catalysts can be described by electronic effects (electrostatic charge of the transition‐metal atom) and steric effects (minimum structural cone angle). The results show that the steric properties of the transition‐metal complexes have the most important effect on the insertion of para‐methylstyrene into the copolymer. If the minimum structural cone angle of the ligand of the transition‐metal catalyst decreases, the incorporation of the comonomer para‐methylstyrene increases significantly. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2061–2067, 2005     

Living copolymerization of ethylene with norbornene mediated by heteroligated (Salicylaldiminato)(β‐enaminoketonato)titanium catalysts

Three heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH?N(C₆F₅)][(p‐XC₆H₄)N?C(Bu^t)CHC(CF₃)O]TiCl₂ ( 3a : X = F, 3b : X = Cl, 3c : X = Br) were synthesized and investigated as the catalysts for ethylene polymerization and ethylene/norbornene copolymerization. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts exhibited high activities toward ethylene polymerization, similar to their parallel parent catalysts. Furthermore, they also displayed favorable ability to efficiently incorporate norbornene into the polymer chains and produce high molecular weight copolymers under the mild conditions, though the copolymerization of ethylene with norbornene leads to relatively lower activities. The sterically open structure of the β‐enaminoketonato ligand is responsible for the high norbornene incorporation. The norbornene concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resulting copolymer. When the norbornene concentration in the feed is higher than 0.4 mol/L, the heteroligated catalysts mediated the living copolymerization of ethylene with norbornene to form narrow molecular weight distribution copolymers (M_w/M_n < 1.20), which suggested that chain termination or transfer reaction could be efficiently suppressed via the addition of norbornene into the reaction medium. Polymer yields, catalytic activity, molecular weight, and norbornene incorporation can be controlled within a wide range by the variation of the reaction parameters such as comonomer content in the feed, reaction time, and temperature. ©2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6072–6082, 2009     

8-苯胺-1-萘磺酸钛配合物的合成及催化乙烯与降冰片烯共聚合反应

合成了新型催化剂8-苯胺-1-萘磺酸钛配合物, 并应用于乙烯与降冰片烯的共聚合反应中. 分别考察了助催化剂种类[甲基铝氧烷(MAO)和三乙基铝(TEA)]、 降冰片烯浓度、 Al/Ti摩尔比、 聚合温度和聚合压力对催化活性与共聚性能的影响. 通过核磁共振、示差扫描量热和凝胶渗透色谱等对所制备的共聚物进行了表征. 结果表明, 在相同条件下, 以MAO为助催化剂时, 共聚催化活性更高, 催化剂为单活性中心, 可得到分子量分布较窄(PDI≈3)的共聚产物, 其共聚反应机理为加成聚合. 另外, 随着降冰片烯浓度的升高, 共聚物中降冰片烯单元的摩尔比呈线性上升趋势, 所得共聚物的熔点随之降低.     

Appreciable norbornene incorporation in the copolymerization of ethylene/norbornene using titanium catalysts containing trianionic N[CH2CH(Ph)O]33− ligands

The newly synthesized 1‐TiCl (C₃ symmetric) and 2‐TiCl (C_s symmetric) precatalysts in combination with MAO polymerized ethylene, cyclic olefins, and copolymerized ethylene/norbornene in good yields. The catalyst with C₃ symmetry exhibits moderate catalytic activity and efficient norbornene incorporation for E/NBE copolymerization in the presence of MAO [activity = 360 kg polymer/(mol Ti h), ethylene 1 atm, NBE 5 mmol/mL, 10 min], affording poly(ethylene‐co‐NBE)s with high norbornene contents (42.0%) and the C_s symmetric catalyst showed an activity of 420 kg polymer/(mol Ti h), ethylene 1 atm, NBE 5 mmol/mL affording poly(ethylene‐co‐NBE)s with 33.0% norbornene content. The effect of monomer concentration at ambient temperature and constant Al/Ti ratio for the homo and copolymerization was studied in a detailed manner. We found that apart from the electronic environment around the metal center the steric environment provided by the symmetry of the catalyst systems has a considerable influence on the percentage of norbornene content of the copolymer obtained. We also found that with a given catalyst a variable clearly influencing the copolymer microstructure, hence also the copolymer properties, is the monomer concentration at a given feed ratio. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 444–452, 2008     

Copolymerization of ethylene and propylene catalyzed by magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts

Magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts with di-i-butyl phthalate as internal donor for copolymerization of ethylene and propylene were prepared.The effects of reaction temperature, ethylene/propylene molar ratio,aluminium/vanadium（Al/V）molar ratio and titanium/vanadium molar ratio on the catalytic activity were investigated.The molecular weight,molecular weight distribution,sequence composition and crystallinity of the products were measured by gel permeation chromatography,¹³C-NMR and differential scanning calorimetry analysis, respectively.In comparison to the vanadium and titanium catalysts,the bimetallic catalyst showed higher catalytic activity and better copolymerization performance.The obtained ethylene/propylene copolymers have high molecular weight （10⁵）,broad molecular weight distribution,high propylene content with random or short blocked sequence structures （r_Er_P=1.919）,low melting temperatures and low crystallinities（X_c<20%）.     

Functionalization of vinylic addition polynorbornenes via efficient copolymerization of norbornene using Ni(II)‐Me complexes

The facile and efficient functionalization of polynorbornene has been achieved through direct copolymerization of norbornene (NB) with 5‐norbornene‐2‐yl acetate (NBA) or 5‐norbornene‐2‐methanol (NBM) using a series of β‐ketiminato Ni(II)‐Me pyridine complexes 1–4 (Scheme 2 ) in the presence of B(C₆F₅)₃. Remarkably, the monomer conversion could reach up to about 96% in 10 min in the NB/NBA copolymerization. The copolymers with wide NBA contents (3.3–38.4 mol %) were obtained by variation of reaction conditions. These copolymers have high molecular weights (MWs) (M_n = 41.8–144 kg/mol) and narrow MW distributions (M_w/M_n = 1.80–2.27). In the absence of alkyl aluminum compounds, a monomer conversion of 81% was observed in the NB/NBM copolymerization, and copolymers with NBM content in the range of 11.2–21.8 mol % were obtained by variation of reaction conditions. In addition, Ni(II)‐Me pyridine complexes 2 was very active at a low B/Ni molar ratio of 6, while bis‐ligand complex 6 bearing the same ligand just showed moderate efficiency at a high B/Ni molar ratio of 20. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ni(II) and Pd(II) complexes bearing benzocyclohexane–ketoarylimine for copolymerization of norbornene with 5‐norbornene‐2‐carboxylic ester

A serial of late transition metal complexes, which bearing Benzocyclohexane–ketoarylimine ligand and named as Mt(benzocyclohexane–ketoarylimino)₂ {Mt(bchkai)₂: Mt=Ni or Pd; bchkai=C₁₀H₈(O)CN(Ar)CH₃; Ar=naphthyl or fluoryl}, have been synthesized and characterized. The molecular structures of the ligands and nickel complex have been confirmed by X‐ray single‐crystal analyses. The nickel complexes exhibited very high activity up to 2.7 × 10⁵ g_polymer/mol_Ni·h and palladium complexes showed high activity up to 2.3 × 10⁵ g_polymer/mol_Pd·h for norbornene (NB) homo‐polymerization with tris(pentafluorophenyl)borane as cocatalyst. The four complexes were effective for copolymerization of NB and 5‐norbornene‐2‐carboxylic acid methyl ester (NB‐COOCH₃) in relatively high activities (0.1–2.4 × 10⁵ g_polymer/mol_Mt·h) and produced the addition‐type copolymers with relatively high molecular weights (0.5 × 10⁵–1.2 × 10⁵ g/mol) as well as narrow molecular weight distributions (PDI < 2 for all polymers). Influences of the metals and comonomer feed content on the polymerization activity as well as on the incorporation rates (20.9–42.6%) were investigated. The achieved NB/NB‐COOCH₃ copolymers were confirmed to be noncrystalline, exhibited good thermal stability (T_d > 400°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Hydroxy‐Functionalized Cyclic Olefin Copolymer and Its Block Copolymers with Semicrystalline Polyolefin Segments

Synthesis of hydroxy‐functionalized cyclic olefin copolymer (COC) is achieved with remarkably high activity (up to 5.96 × 10⁷ g‐polymer mol‐Ti⁻¹ h⁻¹) and controlled hydroxy group in a wide range (≈17.1 mol%) by using ansa‐dimethylsilylene (fluorenyl)(amido)titanium complex. The catalyst also promotes living/controlled copolymerization to afford novel diblock copolymers consisting of hydroxy‐functionalized COC and semicrystalline polyolefin sequence such as polyethylene and syndiotactic polypropylene, where the glass transition temperature of the norbornene/10‐undecen‐1‐ol segment and each block length are controlled by comonomer composition and copolymerization time, respectively.

     

Copolymerization of norbornene and 5‐norbornene‐2‐yl acetate using novel bis(β‐ketonaphthylamino)Ni(II)/B(C6F5)3/AlEt3 catalytic system

Vinyl‐type copolymerization of norbornene (NBE) and 5‐NBE‐2‐yl‐acetate (NBE‐OCOMe) in toluene were investigated using a novel homogeneous catalyst system based on bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. The copolymerization behavior as well as the copolymerization conditions, such as the levels of B(C₆F₅)₃ and AlEt₃, temperature, and monomer feed ratios, which influence on the copolymerization were examined. Without combination of AlEt₃, the catalytic bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃ exhibited very high catalyst activity for polymerization of NBE. Combination of AlEt₃ in catalyst system resulted in low conversion for polymerization of NBE. For copolymerization of NBE and NBE‐OCOMe, involvement of AlEt₃ in catalyst is necessary. Slight addition of NBE‐OCOMe in copolymerization of NBE and NBE‐OCOMe gives rise to significant increase of catalyst activity for catalytic system bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. Nevertheless, excess increase of the NBE‐OCOMe content in the comonomer feed ratios results in decrease of conversion as well as activity of catalyst. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of FTIR, ¹H NMR, and ¹³C NMR spectra. ¹³C NMR studies further revealed the composition of the copolymer and the incorporation rate was 7.6–54.1 mol % ester units at a content of 30–90 mol % of the NBE‐OCOMe in the monomer feeds ratios. TGA analysis results showed that the copolymer exhibited good thermal stability (T_d > 410 °C) and failed to observe the glass transitions temperature over 300 °C. The copolymers are confirmed to be noncrystalline by WAXD analysis results and show good solubility in common organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3990–4000, 2009     

Binuclear titanium complexes coordinated by rigid p-phenylene linked bis-β-carbonylenamine: Synthesis,structure, ethylene polymerization and copolymerization with 1,5-hexadiene

Binuclear complexes for olefin polymerization have attracted great attention due to their unique catalytic properties compared with their mononuclear counterparts. Here a series of p-phenylene-bridgedbis-β-carbonylenamine ligands and their binuclear Ti complexes Ti ₂ L ¹ – Ti ₂ L ³ were prepared and characterized by ¹H NMR, ¹³C NMR, Fourier transform infrared spectroscopy, and elemental analysis. The binuclear complex Ti ₂ L ³ bearing an octylthio sidearm was further investigated by single-crystalX-ray diffraction, which revealed that the ligand was of β-imino enol form, with one titanium atom ligated with six other atoms, forming a deformed octahedral configuration. Furthermore, the ligand in Ti ₂ L ³ adopted a cis configuration, which was different from the trans configuration of its m-phenylene-bridged derivatives. These binuclear complexes ( Ti ₂ L ¹ – Ti ₂ L ³ ) could catalyze ethylene polymerization and copolymerization with 1,5-hexadiene(1,5-HD) efficiently under modified methylaluminoxane activation. Compared with the mononuclear complex TiL ⁵ , the binuclear catalysts were thermally more stable and showed higher activity for ethylene polymerization at higher temperatures. The activity of these titanium complexes for the copolymerization of ethylene with 1,5-HD were over 10⁶ g/mol Ti.h.atm, almost twice as high as for homopolymerization. Compared with the mononuclear analogue TiL ⁵ and the m-substituted binuclear derivative Ti ₂ L ⁴ , binuclear catalyst Ti ₂ L ² showed higher activity and insertion rate of the comonomer. The activity of Ti ₂ L ² was two to three times higher than that of TiL ⁵ and Ti ₂ L ⁴ , indicating that p-substituted binuclear catalysts generate clear bimetallic synergistic effect for the copolymerization of ethylene and 1,5-HD. Meanwhile, 1,5-HD takes 1,3-cyclopentyl form in the polymer by 1,3-insertion. The copolymer prepared by binuclear catalysts had higher molecular weight and wider molecular weight distribution than that prepared by the mononuclear catalyst.     

Synthesis and structural characterization of ethylene–norbornene copolymer with high norbornene content catalyzed by β-diketiminato nickel/methylaluminoxane

Ethylene–norbornene (E–N) copolymerizations were carried out by using β-diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6-ⁱPr₂C₆H₃, 1; Ar = 2,6-Me₂C₆H₃, 2) in the presence of methylaluminoxane (MAO). Complex 1 bearing bulky isopropyl ortho substituents showed higher activity than 2 for the E–N copolymerization. The activity of the catalytic systems increased with increasing the feed ratio of norbornene/ethylene (N/E), and gave the E–N copolymers with high norbornene content more than 75 mol%. In the microstructures of copolymers generated with the catalytic systems, norbornene microblocks with a length of two or three norbornene units have been detected. Results have shown that the activity and the content of norbornene in copolymer depend on the N/E feed ratio.     

Ni(II) and Pd(II) complexes bearing novel bis(β‐ketoamino) ligand and their catalytic activity toward copolymerization of norbornene and 5‐norbornene‐2‐yl acetate combined with B(C6F5)3

Two complexes Mt{C₁₀H₈(O)C[N(C₆H₅)]CH₃}₂ [Mt = Ni(II); Mt = Pd(II)] were synthesized, and the solid‐state structures of the complexes have been determined by single‐crystal X‐ray diffractions. Homopolymerization of norbornene (NB) and copolymerization of NB and 5‐norbornene‐2‐yl acetate (NB‐OCOCH₃) were carried out in toluene with both the two complexes mentioned above in combination with B(C₆F₅)₃. Both the catalytic systems exhibited high activity toward the homopolymerization of NB (as high as 2.7 × 10⁵ g_polymer/mol_Ni h, for Ni(II)/B(C₆F₅)₃ and 2.1 × 10⁵ g_polymer/mol_Pd h for Pd(II)/B(C₆F₅)₃, respectively.). Although the Pd(II)/B(C₆F₅)₃ shows very lower activity toward the copolymerization of NB with NB‐OCOCH₃, Ni(II)/B(C₆F₅)₃ shows a high activity and produces the addition‐type copolymer with relatively high molecular weights (MWs; 1.80–2.79 × 10⁵ g/mol) as well as narrow MW distribution (1.89–2.30). The NB‐OCOCH₃ content in the copolymers can be controlled up to 5.8–12.0% by varying the comonomer feed ratios from 10 to 50%. The copolymers exhibited high transparency, high glass transition temperature (T_g > 263.9 °C), better solubility, and mechanical properties compared with the homopolymer of NB. The reactivity ratios of the two monomers were determined to be r_NB‐OCOMe = 0.08, r_NB = 7.94 for Ni(II)/B(C₆F₅)₃ system, and r_NB‐OCOMe = 0.07, r_NB = 6.49, for Pd(II)/B(C₆F₅)₃ system by the Kelen‐Tüdõs method. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copolymerization of ethylene with styrene catalyzed by a linked bis(phenolato) titanium catalyst

Copolymerization of ethylene with styrene, catalyzed by 1,4‐dithiabutanediyl‐linked bis(phenolato) titanium complex and methylaluminoxane, produced exclusively ethylene–styrene copolymers with high activity. Copolymerization parameters were calculated to be r_E = 1.2 for ethylene and r_S = 0.031 for styrene, with r_E r_S = 0.037 indicating preference for alternating copolymerization. The copolymer microstructure can be varied by changing the ratio between the monomers in the copolymerization feed, affording copolymers with styrene content up to 68%. The copolymer microstructure was fully elucidated by ¹³C NMR spectroscopy revealing, in the copolymers with styrene content higher than 50%, the presence of long styrene–styrene homosequences, occasionally interrupted by isolated ethylene units. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1908–1913, 2006