Characterization of Paris polyphylla var. yunnanensis by Infrared and Ultraviolet Spectroscopies with Chemometric Data Fusion

Paris polyphylla var. yunnanensis has been used for its anti-tumor, anthelmintic, and hemostatic properties. In this investigation, Fourier transform infrared and ultraviolet spectroscopy combined with chemometrics were used for qualitative analysis of P. polyphylla var. yunnanensis from different geographical origins in Yunnan Province. A total of 82 samples for each region were divided into 57 in the calibration set and 25 in the validation set by Kennard–Stone algorithm. Support vector machine and partial least square discrimination on the basis of Fourier transform infrared, ultraviolet, and low- and mid-level data fusion were investigated. Different pretreatments were compared for the appropriate model. The results indicated that the combination of Savitzky–Golay (11 points), second derivative, and standard normal variation has the best performance for support vector machine and partial least square discrimination with the lowest root mean square error of estimation and root mean square error of cross validation and the highest cross validation accuracy rate. The accuracies of calibration and validation for mid-level data fusion in the model of support vector machine were 84.21 and 96% for the partial least square discrimination values of 96.49 and 84%, which was better performance than a single technique or low-level data fusion for the classification. Moreover, the chemical information of sample collected from Kunming and Xishuangbanna was distinguishable from the others. These results provide a rapid and robust strategy for quality control of P. polyphylla var. yunnanensis for further analysis.     

Determination of Basic Nitrogen in Residues of Crude Oil Distillation Using ATR-FTIR and Chemometric Methods

A method for basic nitrogen determination in residues of crude oil distillation using infrared spectroscopy and chemometrics algorithms was developed. Interval partial least squares, synergy interval partial least squares, and backward interval partial least squares were evaluated for calibration model construction. The samples were divided into a calibration and prediction set containing 40 and 15 samples, respectively. The first derivative with a Savitzky-Golay filter and the mean centered data showed the best results and were used in all calibration models. The backward interval partial least squares algorithm with spectra divided in 60 intervals and combinations of 4 intervals (1407 to 1372; 1117 to 1082; 971 to 936; 914 to 879 cm^?1) showed the best root mean square error of prediction of 0.016 wt%. This calibration model displayed a suitable correlation coefficient between reference and predicted values.     

Determination of Iridoids in Gentiana rigescens by Infrared Spectroscopy and Multivariate Analysis

Gentiana rigescens is a famous herbal medicine in China for treatment of convulsion, rheumatism, and jaundice. Here, the infrared determination of gentiopicroside, swertiamarin, sweroside, and loganic acid in G. rigescens from different areas and varieties was presented for the first time. Reference information for the iridoids were obtained by high-performance liquid chromatography. Partial least squares was used to characterize the relationship between spectra matrix and concentration vector for the determination of the analytes. For determination of gentiopicroside, the appropriate performance of partial least squares model was acquired with coefficient of determination of calibration and coefficient of determination of prediction values of 0.965 and 0.868. The root mean square error of estimation (RMSEE), root mean square error of cross validation (RMSECV), root mean square error of prediction (RMSEP), and residual predictive deviation (RPD) values were 2.612, 5.292, 5.239?mg g^?1, and 2.701, respectively, based on the first derivative and multiplicative scatter correction. For determination of the total iridoids, the best results were obtained using the coefficient of determination of calibration and coefficient of determination of prediction of 0.943 and 0.834, RMSEE, RMSECV, RMSEP and RPD of 3.896, 7.536, 6.543?mg g^?1 and 2.438, respectively, based on the first derivative. Both models were reliable and robust. The results demonstrated that infrared spectroscopy provided a rapid, low-cost tool to monitor the quality of G. rigescens by the determination of the iridoids.     

Determination of polyphenols in oats by near-infrared spectroscopy (NIRS) and two-dimensional correlation spectroscopy

Two-dimensional correlation spectroscopy (2DCOS) and near-infrared spectroscopy (NIRS) were used to determine the polyphenol content in oat grain. A partial least squares (PLS) algorithm was used to perform the calibration. A total of 116 representative oat samples from four locations in China were prepared and the corresponding near-infrared spectra were measured. Two-dimensional correlation spectroscopy was employed to select wavelength bands for the PLS regression model for the polyphenol determination. The number of PLS components and intervals was optimized according to the coefficients of determination (R²) and root mean square error of cross validation (RMSECV) in the calibration set. The performance of the final model was evaluated using the correlation coefficient (R) and the root mean square error of validation (RMSEV) in the prediction set. The results showed the band corresponding to the optimal calibration model was between 1350 and 1848?nm and the optimal spectral preprocessing combination was second derivative with second smoothing. The optimal regression model was obtained with an R² of 0.8954 and an RMSECV of 0.06651 in the calibration set and R of 0.9614 and RMSEV of 0.04573 in the prediction set. These measurements reveal the calibration model had qualified predictive accuracy. The results demonstrated that the 2DCOS with PLS was a simple and rapid method for the quantitative determination of polyphenols in oats.     

Determination of Fipronil in Acetamiprid Formulation by Attenuated Total Reflectance-Mid-Infrared Spectroscopy Combined with Partial Least Squares Regression

There is a high demand for rapid determination of fipronil in pesticide preparations because it has been restricted and even prohibited in many countries. An infrared-based methodology was developed for this analyte in acetamiprid formulations by attenuated total reflectance mid-infrared spectroscopy. The quantitative calibration models of fipronil were established by partial least squares regression. The determination coefficients (R²) of the model were above 0.99 while both the root mean square error of prediction and root mean square error of calibration were below 0.0011, which showed the partial least squares model accurately predicted fipronil concentrations in acetamiprid. The accuracy was further demonstrated by comparison with another two models' results of low (<1.0%, w/w) and high concentration sample sets (1.0%–4.5%, w/w). These results demonstrate the potential of infrared spectroscopy to quickly detect fipronil in acetamiprid.     

近红外光谱技术定量分析连作滁菊土壤中的阿魏酸含量

应用近红外光谱(NIRS)技术定量分析连作滁菊土壤样品中阿魏酸的含量.通过标准杠杆值、学生残差和马氏距离判断异常光谱,经二阶导数和Norris平滑滤噪预处理后,在6000~4000 cm-1范围,最佳因子数为7,采用偏最小二乘法(PLS)构建数学模型.结果表明,模型校正集和验证集与高效液相色谱仪(HPLC)测定的参考值之间均呈现良好相关关系,校正相关系数Rc为0.9914,交叉验证相关系数Rcv为0.9935,校正集误差均方根(RMSEC)为0.484,预测误差均方根(RMSEP)为0.539,交叉验证误差均方根(RMSECV)为0.615.研究结果表明,NIRS分析技术能够实现连作土壤中阿魏酸的快速检测,结果准确可靠.     

Rapid Simultaneous Determination of Andrographolides in Andrographis paniculata by Near-Infrared Spectroscopy

The potential of near-infrared spectroscopy (NIRS) for the quality control of traditional Chinese medicine has been evaluated. Seven quantitative parameters, andrographolide, deoxyandrographolide, dehydroandrographolide, neoandrographolide, moisture, ash content, and alcohol-soluble extract of Andrographis paniculata, were evaluated by NIRS. The reference values of andrographolides were determined by high-performance liquid chromatography, and the others were obtained using the standard methods of the 2015 Chinese Pharmacopoeia. The predicted values were determined by a quantitative model using NIRS based on partial least square regression. Different spectral preprocessing methods, spectral ranges, and optimum number of factors were selected to optimize the models. All models were estimated by the combination of various parameters, including the correlation coefficient of calibration for andrographolide, deoxyandrographolide, dehydroandrographolide, neoandrographolide, moisture, ash content, alcohol-soluble extract (values of 0.980, 0.984, 0.989, 0.983, 0.987, 0.988, 0.979, respectively), root mean square error of calibration (values of 0.156, 0.038, 0.050, 0.029, 0.604, 0.431, 0.135, respectively), root mean square error of prediction (values of 0.169, 0.041, 0.050, 0.033, 0.280, 0.493, 0.140, respectively), root mean square error of cross-validation (values of 0.626, 0.114, 0.158, 0.046, 1.145, 0.774, 0.508, respectively), and ratio of standard deviation to standard error of prediction (values of 4.583, 4.690, 4.796, 4.899, 4.899, 4.690, 5.099, respectively). The results show that the calibration models by NIRS are reliable and can be applied for the quantification for seven parameters from A. paniculata for quality control in traditional Chinese medicine production and processing.     

Rapid determination of Paeoniae Radix using near infrared spectroscopy

A rapid and nondestructive near infrared spectroscopy (NIRS) was used to differentiate different geographical Paeoniae Radix and quantitatively predict the content of main active components. Paeoniflorin, albiflorin and benzoylalbiflorin were analyzed simultaneously with an Agilent Zorbax SB-C₁₈ column by gradient elution under high-performance liquid chromatography-UV detection (HPLC-UV). Multiplicative scatter correction (MSC), first derivative and Savitsky-Golay were utilized together to correct the scattering effect and eliminate the baseline shift in all near infrared diffuse reflectance spectra in order to give a better correlation with the results obtained by HPLC-UV. Multiplicative regression methods were discussed. The spectra calibration equations produced highest correlation coefficient values (R²) and lowest root mean square error of prediction (RMSEP) were used for the determination of paeoniflorin, albiflorin and benzoylalbiflorin. The RMSEP of paeoniflorin, albiflorin and benzoylabiflorin were 0.866 mg/g, 0.369 mg/g and 0.084 mg/g, respectively, and the R² of cross validation were 0.986, 0.939 and 0.971, respectively. Furthermore with the use of principle component analysis (PCA), Paeoniae Radix was clustered according to different cultivation area. The results indicated that the NIRS method could be used for the quality control of Chinese herbal medicine.     

Horizontal attenuated total reflection applied to simultaneous determination of ash and protein contents in commercial wheat flour

Partial least-squares (PLS) regression was used to generate various models for the determination of both the protein and the ash contents of wheat flours by using spectroscopic data in the mid-infrared region obtained with a horizontal attenuated total reflectance (HATR) accessory. One hundred samples of wheat flour were used as purchased in the market: 55 for constructing the calibration model and 45 as external samples. The protein content varied between 8.85 and 13.23% and the ash content, between 0.330 and 1.287%, as determined by reference methods. Raw spectra and those corrected by multiplicative signal correction (MSC), first and second derivative spectra, were used as data for building the models. Different pre-treatments, such as mean centered and/or variance scaled (VS) methods, were tested and compared. Very good models were built as judged by the correlation coefficients (R²), root mean square error of calibration (RMSEC), root mean square error of validation (RMSEV) and root mean square error of prediction (RMSEP) that were obtained. Best results were achieved with MSC treated spectra.     

Discrimination of transgenic tomatoes based on visible/near-infrared spectra

VIS-NIR spectroscopy combined with multivariate analysis after the appropriate spectral data pre-treatment has been proved to be a very powerful tool for judgment of the relative pattern of the objects that have very similar properties. In this study, seventy transgenic tomatoes with antisense LeETR2 and 94 of their parents, non-transgenic ones were measured in VIS-NIR diffuse reflectance mode. Principal component analysis (PCA), discriminant analysis (DA) and partial least-squares discriminant analysis (PLSDA) were applied to classify tomatoes with different genes into two groups. Calibrations were developed using PLS regression with the leave-one-out cross-validation technique. The results show that differences between transgenic and non-transgenic tomatoes do exist and excellent classification can be obtained after optimizing spectral pre-treatment. The correct classifications for transgenic and non-transgenic tomatoes were both 100% using PLSDA after derivative spectral pre-treatment. The raw spectra with PLSDA model after the second derivative pre-treatment had the best satisfactory calibration and prediction abilities, with r_c = 0.97964, root mean square error of calibration (RMSEC) = 0.099, r_cv = 0.97963, root mean square error of cross-validation (RMSECV) = 0.0993 and a factor. The results in the present study show VIS-NIR spectroscopy together with chemometrics techniques could be used to differentiate transgenic tomato, which offers the benefit of avoiding time-consuming, costly and laborious chemical and sensory analysis.     

Determination of Parameter Uncertainty for Quantitative Analysis of Shaddock Peel Pectin using Linear and Nonlinear Near-infrared Spectroscopic Models

Fourier transform near-infrared spectrometry has been used in combination with multivariate chemometric methods for wide applications in agriculture and food analysis. In this paper, we used linear partial least square and nonlinear least square support vector machine regression methods to establish calibration models for Fourier transform near-infrared spectrometric determination of pectin in shaddock peel samples. In particular, the tunable kernel parameters of the linear and nonlinear models were set changing in a moderate range and were optimally selected in conjunction with a Savitzky–Golay smoother. The smoothing parameters and the linear/nonlinear modeling parameters were combined for simultaneous optimization. To investigate the robustness of calibration models, parameter uncertainty were estimated in a direct way for the optimal linear and nonlinear models. Our results show that the nonlinear least square support vector machine method gives more accurate predictive results and is substantially more robust compared to the spectral noise when compared with the linear partial least square regression. Furthermore, the optimized least square support vector machine model was evaluated by the randomly selected test samples and the model test effect was much satisfactory. We anticipate that these linear and nonlinear methods and the methodology of determination of model parameter uncertainty will be applied to other analytes in the fields of near-infrared or Fourier transform near-infrared spectroscopy.     

近红外光谱测定溶液中甲醇的含量

测量了含微量甲醇(体积分数为0.04%～0.24%)的系列乙醇水溶液的近红外光谱,利用近红外光谱分析建立了预测甲醇含量的定量分析模型。比较了用外部检验法(Test Set-Validation)和交叉检验法(Cross-Validaton)建立的数学模型,研究了使用外部检验法时,校正集和检验集样品数的改变对模型预测结果的影响。结果发现,当校正集样品数为15检验集样品数为6(总样品数为21)时,使用外部检验法建立的数学模型预测结果较好,其校正集的均方根误差和检验集的预测均方根误差(分别为RMSEE和RMSEP)均较小(分别为0.0115和0.0105),而且很接近。结果表明,近红外光谱方法简单,准确而且实用。     

Determination of API Gravity and Total and Basic Nitrogen Content by Mid- and Near-Infrared Spectroscopy in Crude Oil with Multivariate Regression and Variable Selection Tools

Abstract

American Petroleum Institute (API) gravity is an important parameter in the crude oil industry and the nitrogen compounds are related to the toxic effects of the oil in refineries and the environment. In this paper, 194 crude oil samples with API gravities ranging from 11.4 to 57.5 were used for the purpose of estimating the physicochemical properties: API gravity, total nitrogen content (TNC) and basic nitrogen content (BNC). Initially, infrared spectra in the mid and near regions (MIR and NIR) were collected, then full-spectral partial least squares (PLS) and the orthogonal projections to latent structures (OPLS) chemometric models were developed and validated, as well as models using interval PLS (iPLS), synergy interval PLS (siPLS) and competitive adaptive reweighted sampling PLS (CARSPLS) as variable selection tools. For API gravity and TNC, the best calibration technique is the NIR CARSPLS with a root mean square error of prediction (RMSEP) values of 0.9 and 0.0275?wt%, respectively. For BNC, the best technique is MIR siPLS with a prediction error of 0.0134?wt%. The results were validated based on the evaluation of the figures of merit, a statistical evaluation of the accuracy, characterization of the systematic error and measurement for errors in the residues. The results were satisfactory considering the high variability of the data and the diversity of the samples, demonstrating suitable applicability for practical analysis.     

Cellulose I crystallinity determination using FT–Raman spectroscopy: univariate and multivariate methods

Two new methods based on FT–Raman spectroscopy, one simple, based on band intensity ratio, and the other using a partial least squares (PLS) regression model, are proposed to determine cellulose I crystallinity. In the simple method, crystallinity in cellulose I samples was determined based on univariate regression that was first developed using the Raman band intensity ratio of the 380 and 1,096 cm^?1 bands. For calibration purposes, 80.5% crystalline and 120-min milled (0% crystalline) Whatman CC31 and six cellulose mixtures produced with crystallinities in the range 10.9–64% were used. When intensity ratios were plotted against crystallinities of the calibration set samples, the plot showed a linear correlation (coefficient of determination R ² = 0.992). Average standard error calculated from replicate Raman acquisitions indicated that the cellulose Raman crystallinity model was reliable. Crystallinities of the cellulose mixtures samples were also calculated from X-ray diffractograms using the amorphous contribution subtraction (Segal) method and it was found that the Raman model was better. Additionally, using both Raman and X-ray techniques, sample crystallinities were determined from partially crystalline cellulose samples that were generated by grinding Whatman CC31 in a vibratory mill. The two techniques showed significant differences. In the second approach, successful Raman PLS regression models for crystallinity, covering the 0–80.5% range, were generated from the ten calibration set Raman spectra. Both univariate-Raman and WAXS determined crystallinities were used as references. The calibration models had strong relationships between determined and predicted crystallinity values (R ² = 0.998 and 0.984, for univariate-Raman and WAXS referenced models, respectively). Compared to WAXS, univariate-Raman referenced model was found to be better (root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) values of 6.1 and 7.9% vs. 1.8 and 3.3%, respectively). It was concluded that either of the two Raman methods could be used for cellulose I crystallinity determination in cellulose samples.     

Attenuated Total Reflection-Fourier transform infrared analysis of the fermentation process of pineapple

A direct and reagent free procedure has been developed to monitor the fermentation process of pine apple nectar using Attenuated Total Reflectance Fourier-transform mid-infrared spectrometry (FT-IR) and multivariate analysis. A classical 4² design for standards was employed for calibration using the information in the spectral range from 907 to 1531 cm⁻¹ of the first order derivative spectra after mean centering of infrared data. The root mean square error of calibration (RMSEC) of 0.040, 0.021, 0.063 and 0.074% w/w were obtained for glucose, fructose, saccharose and ethanol, respectively, and a mean relative validation error of 2.9, 2.1, 2.6 and 3.6% was achieved for glucose, fructose, saccharose and ethanol. Results obtained by the proposed procedure for the alcohol content at different fermentation levels were statistically comparable with those obtained by a reference spectrometric method. So, FT-IR spectrometry provides a fast alternative to long and tedious classical procedures to ethanol determination and sugar enzymatic analysis.     

Characterization of Mint Essential Oils by High-performance Liquid Chromatography and Chemometrics

The raw material from Mentha piperita L, M. arvensis L, M. longifolia L, M. spicata, and M. suaveolens from various locations were extracted using steam distillation to obtain the mint essential oils. High-performance liquid chromatography was used to obtain fingerprints of the mint samples. SpecAlign, Savitzky–Golay, recursive alignment by fast Fourier transform, Pearson’s correlation coefficient, and principal component analysis were used to characterize the chromatograms. The results were used to confirm the similarities of M. longifolia collected in Ostrowsko, Poland in 2013 and 2014. The considerable similarity of these M. longifolia samples demonstrates that the reported chemometric approach is suitable for the classification of plant materials.     

近红外光谱技术用于花生油中棕榈油含量的测定

本文采用近红外光谱技术采集样品的近红外光谱数据,光谱经一阶求导后,采用偏最小二乘法(PLS)建立花生油中棕榈油含量的定标模型,并用交互验证法对模型进行了验证。模型相关系数为0.9963,校正均方根(RMSEC)为0.937。该模型应用于实际样品的检测,结果令人满意。     

Pareto calibration with built-in wavelength selection

In multivariate regression, it is often reported that wavelength selection can improve results. Improvement is often solely based on bias measures such as the root mean square error of calibration (RMSEC) and root mean square error of validation (RMSEV), R² for the calibration and validation, etc. In recent studies, it has been shown that when variance measures are included, Pareto optimal models can be determined. However, variance measures used to date do not provide the ability to choose wavelength subset models relative to full wavelength models when wavelength subset models may be the Pareto models. In this paper, simplex optimization is used with a more complete variance measure to generate Pareto optimal models. The standard basis set is used as well a basis set that includes the range and null space of the calibration spectra. Results show that it is possible to identify Pareto optimal models and if a wavelength subset is best, these are the models found. Regression coefficients for non-essential wavelengths are zero to near zero.     

Characterization of Gasoline by 1H Nuclear Magnetic Resonance and Chemometrics

Automotive fuel adulteration is an old and significant problem. One common type of fuel adulteration is the addition of diesel to gasoline. Unsupervised models were developed through hierarchical cluster and principal component analysis models. Supervised models through partial least square discriminant analysis using ¹H nuclear magnetic resonance spectra as the input were used to classify samples as adulterated or unadulterated. Quantitative models were developed using partial least squares to determine the gasoline and diesel concentrations in the samples. This set contained samples composed of pure gasoline and anhydrous ethanol reproducing commercial gasoline and other samples treated with diesel. Hierarchical cluster and principal component analysis did not distinguish between adulterated and unadulterated samples except for the most adulterated materials. However, partial least square discriminant analysis classified 100% of the samples correctly. The partial least square algorithm provided excellent regression models for the gasoline and diesel content. The determination coefficient was 0.9920 for both models, whereas the root mean square error of cross-validation and root mean square error of prediction for the diesel model were 2.32 and 1.42%, respectively, and 2.40 and 1.38% for the gasoline model.