Biocatalytic removal of nickel and vanadium from petroporphyrins and asphaltenes

Asphaltenes from a crude oil rich in heavy metals (Castilla crude oil) were fractionated and partially characterized. Biocatalytic modifications of these fractionated asphaltenes by three different hemoproteins: chloro-peroxidase (CPO), cytochrome C peroxidase (Cit-C), and lignin peroxi-dase (LPO) were evaluated in both aqueous buffer and organic solvents. The reactions were carried out in aqueous buffers, ternary systems of toluene: isopropanol: water, and aqueous-miscible organic solvent solutions with petroporphyrins as substrate. The petroporphyrins were more soluble in the ternary systems and aqueous miscible-organic solvent systems than in the aqueous buffer systems. However, only the CPO-mediated reactions were effective in eliminating the Soret peak in both aqueous and organic solvent systems. The effects of CPO-mediated reactions on the release of the metals complexed with the porphyrins and asphaltenes were also determined. Chloroperoxidase was able to alter components in the heavy fractions of petroleum and remove 53 and 27% of total heavy metals (Ni and V, respectively) from petroporphyrin-rich fractions and asphaltenes     

Molecular solubility and hansen solubility parameters for the analysis of phase separation in bulk heterojunctions

Although the fabrication procedures for bulk heterojunction (BHJ) solar cells are routinely optimized to accommodate new organic materials, the influence of solvent properties and cohesive forces on the film‐forming process and the self‐assembly of donor and acceptor molecules on the nanoscale are poorly understood. In this study, we measure the solubility of a variety of organic semiconductors in a range of solvents and calculate cohesive forces including dispersion forces, dipole interactions, and hydrogen bonding via Hansen Solubility Parameters (HSPs). HSPs were calculated by measuring the solubilities of various organic semiconductors in 27 solvents and the influence of solvent identity on film morphology of different BHJ mixtures was explored via atomic force microscopy (AFM). The possibility of correlations between HSPs and film morphology was considered; however, it is apparent that the HSP values alone do not play a critical role in determining the morphology of the films of conjugated polymers and molecules. This collection of solubility data constitutes the first of its type for organic semiconducting materials, and may act as a useful reference for the organic semiconductor community to aid in the understanding and selection of solvents for donor–acceptor BHJ mixtures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Rapid analysis of trace organics in aqueous solutions by enrichment in uncoated capillary columns

Summary A novel technique has been developed for the analysis of trace organics in aqueous solutions. Concentration of organics is effected by passage of the solution being analysed through uncoated plastic or metal capillaries as reported. The concentrated organics are then desorbed from the capillary using an organic solvent, and the desorbed solution is subsequently analysed by gas chromatography. Organics trapped inside a variety of columns have been recovered by solvent desorption in this manner using a number of different solvents, mixed solvents, different solvent volumes, different solvent flow rates through the capillary column and at different desorption temperatures, and the effects of these variables on the efficiency of desorption are discussed.     

Effects of experimental conditions on the molecular composition of maltenes and asphaltenes derived from oilsands bitumen: Characterized by negative-ion ESI FT-ICR MS

A vacuum topped Canadian oilsands bitumen (VTB) was subjected to solvent precipitation and subsequently characterized by elemental analysis, gel permeation chromatograph (GPC), 1 H-NMR spectroscopy and negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Effects of experimental conditions such as solvent types (n-C5 , n-C6 , and n-C7 ), solvent purity, and solvent washing time on asphaltenes yields, bulk composition, and molecular composition of detectable heteroatom compounds in ESI source were determined. Elemental nitrogen and sulfur were enriched in asphaltenes while elemental oxygen had comparable content in maltenes and asphaltenes. Molecular composition of asphaltenes varies with separation conditions. The N1 and O1 species identified by ESI FT-ICR MS were enriched in maltenes. The O2 species exhibited two different double bond equivalents (DBE) distributions and solubility in normal paraffin solvents, indicating two types of molecular structures. Multi oxygen atom containing compounds mainly detected in asphaltenes. Compound class distributions are similar for maltenes derived from n-C5 , n-C6 , and n-C7 , as well as for asphaltenes. The cyclic paraffin impurities in normal paraffin solvents had a significant influence on asphaltenes yields and heteroatom molecular composition. A portion of neutral N1 species and acidic O2 species adsorbed on asphaltenes could be dissolved by increasing washing time. Cautions should be exercised when interpreting the properties and composition of asphaltenes obtained with different experimental conditions.     

On-line sample concentration via micelle to solvent stacking of cations prepared with aqueous organic solvents in capillary electrophoresis

In this paper, by injecting a SDS micellar plug before the sample prepared in aqueous organic solvents, we show the on-line sample preconcentration of cations via micelle to solvent stacking (MSS) using solvents of as low as 30%. This extends the choice of stacking techniques to include moderate amounts of organic solvent in the sample. The approach is akin to in-line solid phase extraction where the micellar plug acted as a transient micellar phase extractor. Basic studies were conducted (e.g. type and amount of organic solvent in the sample). The calculated sensitivity enhancement factors based on LOD obtained for the six test antipsychotic drugs were from 41 to 68. The peak signals were linear (R2 > 0.99) from 0.2 to 10.0 μg/mL. The intraday and interday reproducibility (n = 10) for migration time, peak height, and corrected peak area were from 0.2 to 13.6%. The technique was also tested on spiked wastewater sample with minimal sample treatment (i.e. dilution and centrifugation).     

Sample preparation effects in matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry of partially depolymerised methyl cellulose

Methyl cellulose (MC) was partially depolymerised and the oligomers thus obtained were studied by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS). The depolymerisation was either enzymatic or acidic. Fractions of enzymatically depolymerised MC were collected from size-exclusion chromatography and subjected to a sample preparation investigation. Several MALDI matrices and solvents were evaluated. The results showed that the solvent choice had a significant effect on the measured degree of substitution (DS). Aprotic solvents produced higher DS values, which was most likely due to poor solubility of species with low DS. The obtained signal intensity, however, did not correlate with the solubility but seemed to be more dependent on certain matrix/solvent combinations. All the matrices attempted produced mass spectra with sufficient signal intensity for accurate peak area calculation. The choice of matrix did not have any significant effect on the measured DS. Sample spots obtained from organic solvents had a more homogeneous distribution of the analyte and smaller crystals than those obtained from water. This increased both the reproducibility and peak resolution and in addition the analysis time was shorter. DS measurements were performed on two acidically depolymerised MCs with different nominal DS values. It was easy to distinguish between the two MCs, and the measured DS values agreed well with the values supplied by the manufacturers.     

Oil-in-water nanocontainers as low environmental impact cleaning tools for works of art: two case studies

A novel class of p-xylene-in-water microemulsions mainly based on nonionic surfactants and their application as low impact cleaning tool in cultural heritage conservation is presented. Alkyl polyglycosides (APG) and Triton X-100 surfactants allow obtaining very effective low impact oil-in-water (o/w) microemulsions as alternatives to pure organic solvents for the removal of polymers (particularly Paraloid B72 and Primal AC33) applied during previous conservation treatments. The ternary APG/p-xylene/water microemulsions have been characterized by quasi elastic light scattering to obtain the hydrodynamic radius and the polydispersity of the microemulsion droplets. Laplace inversion of the correlation function CONTIN analysis provided evidence of acrylic copolymers solubilization into the oil nanodroplets. Contact angle, Fourier transform infrared (FTIR), and scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS) data confirmed that microemulsions were effective in removing polymer coatings. The phase diagram of APG microemulsions showed that a reduction >90% (compared to the conventional cleaning methods) of the organic solvent can be achieved by using o/w microemulsions. The microemulsions were successfully tested in two real cases: (1) the APG based microemulsion was used in a Renaissance painting by Vecchietta in Santa Maria della Scala, Siena, Italy, degraded by the presence of a polyacrylate coating applied during a previous restoration and (2) a Triton X-100 oil-in-water microemulsion containing (NH4)2CO3 in the water continuous phase. The association of ammoniun carbonate to the microemusion led to the swelling of an organic deposit (mainly asphaltenes deposited on the fresco in the Oratorio di San Nicola al Ceppo in Florence, still contamined by the water of the Arno river during the 1966 flood) and a very efficient removal of highly insoluble inorganic deposits (mainly gypsum) strongly associated to asphaltenes. These innovative systems are very attractive for the low amount of organic solvent used to extract the polymers or highly insoluble substances as the asphaltene and the very efficient and mild impact of the cleaning procedure on the fragile painted surfaces.     

Stimuli-Responsive Fluorescent Nanoswitches: Solvent-Induced Emission Enhancement of Copper Nanoclusters

Copper nanoclusters (CuNCs) as a new class of fluorescent materials have attracted a great deal of interest due to their outstanding fluorescence properties. In this work, a variety of organic solvents were used to induce self-assembly of glutathione-capped CuNCs (GSH-CuNCs) to form ordered assemblies with enhanced fluorescence properties. Assemblies with multicolor fluorescence emission were constructed on the basis of the aggregation-induced emission (AIE) of GSH-CuNCs and the solvent effect. The fluorescence emission from these GSH-CuNCs assemblies can also be tuned from yellow to purple by changing the organic solvent. A possible mechanism based on the size of the assemblies and electron transfer was explored to explain the solvent effects on GSH-CuNCs. Stimuli-responsive nanoswitches with excellent reversibility can be controlled by changing the type of organic solvent and the ratio of the organic solvent to the aqueous solution of GSH-CuNCs. As the CuNCs assemblies exhibit strong, stable, and color-tunable fluorescence, they were employed as color-conversion materials for recognizing different organic solvents.     

Analysis of Paraben Preservatives in Cosmetic Samples: Comparison of Three Different Dynamic Hollow Fiber Liquid-Phase Microextraction Methods

This study focused on a comparison of three different dynamic hollow fiber-based liquid-phase microextraction (DHF-LPME) methods for extraction and preconcentration of parabens from wastewater, toothpaste, cream, and shampoo samples. The first method is two-phase DHF-LPME, in which n-octanol was used as the extraction solvent. The second is three-phase DHF-LPME, in which n-octanol and basic aqueous solution were used as the extraction solvent and acceptor phase, respectively. High-performance liquid chromatography with UV detection (HPLC–UV) was applied for determination of the parabens in both methods. The third method is a recently introduced method; three-phase DHF-LPME based on two immiscible organic solvents (n-dodecane as organic solvent and acetonitrile as an acceptor phase). The quantitative analyses were performed by the use of gas chromatography-mass spectrometry (GC–MS) after injection port derivatization. The effect of different extraction conditions (i.e., extraction solvent, pH, ionic strength, stirring rate, and dynamic and extraction times) on the extraction efficiency of the parabens was investigated and optimized. All the three procedures provide similar working parameters characterized by high repeatability (3.9–6.3 %) and good linearity (correlation coefficient ranging from 0.989 to 0.998). Results of real sample analyses obtained by these three methods were highly correlated. Although all methods provide compatible alternatives for paraben analysis, the three-phase DHF-LPME based on two immiscible organic solvents may be a more appropriate technique due to its higher extraction efficiency and thus lower limits of detection (LODs). LODs for all the parabens ranged from 0.2 to 5.0 μg L^?1 using the two first methods combined with HPLC–UV. An improvement in sensitivity of several orders of magnitude was achieved using three-phase DHF-LPME based on two immiscible organic solvents followed by single-ion monitoring GC–MS analyses (0.01–0.2 μg L^?1) due to compatibility of this technique with GC instrument.     

Pressurized hot ethanol extraction of carotenoids from carrot by-products

Carotenoids are known for their antioxidant activity and health promoting effects. One of the richest sources of carotenoids are carrots. However, about 25% of the annual production is regarded as by-products due to strict market policies. The aim of this study was to extract carotenoids from those by-products. Conventional carotenoid extraction methods require the use of organic solvents, which are costly, environmentally hazardous, and require expensive disposal procedures. Pressurized liquid extraction (PLE) utilizes conventional solvents at elevated temperatures and pressure, and it requires less solvent and shorter extraction times. The extraction solvent of choice in this study was ethanol, which is a solvent generally recognized as safe (GRAS). The extraction procedure was optimized by varying the extraction time (2-10 min) and the temperature (60-180 °C). β-Carotene was used as an indicator for carotenoids content in the carrots. The results showed that time and temperatures of extraction have significant effect on the yield of carotenoids. Increasing the flush volume during extraction did not improve the extractability of carotenoids, indicating that the extrication method was mainly desorption/diffusion controlled. Use of a dispersing agent that absorbs the moisture content was important for the efficiency of extraction. Analysing the content of β-carotene at the different length of extraction cycles showed that about 80% was recovered after around 20 min of extraction.     

酶联免疫分析法探测Cry1Ab蛋白在不同介质中的构象变化

采用酶联免疫分析（ELISA）方法,根据构象变化后的蛋白与抗体结合能力下降从而导致ELISA测定值降低的原理,探测了转cry1Ab基因水稻表达的Cry1Ab蛋白在不同溶液介质中的热致构象变化行为,以及不同有机溶剂及溶液pH值对该蛋白构象变化的影响程度。实验表明,Cry1Ab蛋白在不同条件下的构象变化程度可以灵敏地通过ELISA方法检测。在不同的介质中,CrylAb蛋白的热致构象变化程度不同。在Na2SO4介质中,该蛋白具有较高的热稳定性;SDS的存在,可以促进该蛋白的构象变化。常温下,25％（V／V）的有机溶剂乙腈、异丙醇、甲醇、乙醇均能使该蛋白的构象发生转变,其中以乙腈最为显著。醇类溶剂对Cry1Ab蛋白的构象影响程度随疏水性增大而增大;溶液pH值也对该蛋白的构象变化产生影响。pH在8-10之间,该蛋白构象能保持稳定;酸或过碱性的溶液均能使蛋白构象偏离原始状态,从而引起ELISA测定值的降低。另外,腐殖酸能在一定时间内保持Cry1Ab蛋白构象的稳定性。     

Immobilized β-cyclodextrin on surface-modified carbon-coated cobalt nanomagnets: reversible organic contaminant adsorption and enrichment from water

Surface-modified magnetic nanoparticles can be used in extraction processes as they readily disperse in common solvents and combine high saturation magnetization with excellent accessibility. Reversible and recyclable adsorption and desorption through solvent changes and magnetic separation provide technically attractive alternatives to classical solvent extraction. Thin polymer layered carbon-coated cobalt nanoparticles were tagged with β-cyclodextrin. The resulting material reversibly adsorbed organic contaminants in water within minutes. Isolation of the immobilized inclusion complex was easily carried out within seconds by magnetic separation due to the strong magnetization of the nanomagnets (metal core instead of hitherto used iron oxide). The trapped molecules were fully and rapidly recovered by filling the cyclodextrin cavity with a microbiologically well accepted substitute, e.g., benzyl alcohol. Phenolphthalein was used as a model compound for organic contaminants such as polychlorinated dibenzodioxins (PCDDs) or bisphenol A (BPA). Fast regeneration of nanomagnets (compared to similar cyclodextrin-based systems) under mild conditions resulted in 16 repetitive cycles (adsorption/desorption) at full efficiency. The high removal and regeneration efficiency was examined by UV-vis measurements at chemical equilibrium conditions and under rapid cycling (5 min). Experiments at ultralow concentrations (160 ppb) underline the high potential of cyclodextrin modified nanomagnets as a fast, recyclable extraction method for organic contaminants in large water streams or as an enrichment tool for analytics.     

染料在青霉菌上的解吸特性研究

比较了有机溶剂的加入及温度变化对染料高效吸附青霉菌(BX1)解吸染料效果的影响,并对解吸过程的动力学进行了研究.结果表明,染料的解吸效果与有机溶剂的极性,以及溶剂的官能团有关,丙酮和甲醇解吸效果最好.解吸过程与吸附过程类似,可分为快速解吸和缓慢解吸两个阶段,整个过程可用二级动力学方程较好的拟合,其表观活化能约为10.64kJ/mol.△H°和△G°的计算表明,在甲醇作用下RB19染料的解吸为吸热和自发的过程.     

混合溶剂体系中牛肝β-半乳糖苷酶催化5-氟-2'-脱氧尿苷区域选择性半乳糖基化反应

研究了混合溶剂体系中有机溶剂种类和含量对牛肝β-半乳糖苷酶催化5-氟-2'-脱氧尿苷区域选择性半乳糖基化反应的影响.结果表明,在含10%(体积分数)有机溶剂体系中,该酶稳定性差,失活严重.减少有机溶剂含量可显著减轻其对该酶的毒害作用.然而,有机溶剂的添加对酶促糖基化反应的区域选择性的影响很小(均保持在99%以上).牛肝...     

化妆品中挥发性有机溶剂的通用检测方法

以化妆品配方中常见及禁用的36种有机溶剂为研究模板,建立了化妆品中挥发性有机溶剂残留评价初筛知识库、确证知识库和定量方法。初筛知识库包括双柱保留指数知识库和NIST质谱库。双柱保留指数知识库以保留指数为定性指标,选择极性的VF-1301ms和非极性的DB-5ms两根色谱柱,用顶空气相色谱-质谱法考察了36种有机溶剂在两种色谱分离系统中的保留特性。利用NIST MS search 2.0作为检索工具,同时建立了36种挥发性有机溶剂的顶空气相色谱-质谱定量方法。样品经60 ℃、30 min静态顶空后以连接了VF-1301ms石英毛细管色谱柱的气相色谱-质谱仪检测,外标法定量。方法检出限为0.01~3.3 μg/g,加标回收率为60.77%~126.60%。该方法从通用性的角度,为化妆品中挥发性有机溶剂残留的筛查、鉴别和定量提供方法,部分解决了测定化妆品中挥发性有机溶剂时需要针对不同检测目标建立不同方法以及潜在溶剂存在备选筛查的问题。     

Structure and properties of the δ‐form and mesophase of syndiotactic polystyrene membranes prepared from different organic solvents

Syndiotactic polystyrene (sPS) membranes were prepared with different organic solvent systems and compared to get the information about the δ‐form complexing behavior of sPS. Further, the guest molecules included in the clathrate δ form of sPS are removed by stepwise extraction method. The conformational changes during the TTGG helical formation of sPS/organic solvent systems have been identified by FTIR spectroscopy, and it was concluded that the TTGG helices were constructed in regular sequences, which depends on the nature of the respective solvents. The TTGG content in the mesophase is found to be increased by removing the guest molecules. The structural changes of sPS/organic solvent systems have been characterized by WAXD analysis. Moreover, the different clathrate structures were found and showed the different crystalline reflections in the WAXD profiles, which are significantly changed with the kind of guest solvent included in sPS. The content of solvents in the clathrated sPS and the desorption temperatures were determined by thermal analysis. The resulted mesophase of sPS membrane contains the nanoporous molecular cavities that depend on the size of the guest molecule. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1873–1880, 2005     

Dynamic Calcium Metal–Organic Framework Acts as a Selective Organic Solvent Sponge

Herein, we present a Ca‐based metal–organic framework named AEPF‐1, which is an active and selective catalyst in olefin hydrogenation reactions. AEPF‐1 exhibits a phase transition upon desorption of guest molecules. This structural transformation takes place by a crystal to crystal transformation accompanied by the loss of single‐crystal integrity. Powder diffraction methods and computational studies were applied to determine the structure of the guest‐free phase. This work also presents data on the exceptional adsorption behavior of this material, which is shown to be capable of separating polar from nonpolar organic solvents, and is a good candidate for selective solvent adsorption under mild conditions.     

Use of open-tubular trapping columns for on-line extraction–capillary gas chromatography of aqueous samples

The applicability of open-tubular trapping columns for on-line extraction–capillary GC analysis is evaluated. The extraction step involves sorption of the analytes from water into the stationary phase of an open-tubular column, removal of the water by purging the trap with nitrogen, and desorption of the analytes with an organic solvent. The effect of swelling of the stationary phase with organic solvents on the retention power of the trap is studied. When using pentane or hexane as swelling agent breakthrough volumes of at least 10 ml can easily be obtained for non-polar compounds. For a number of medium polarity compounds breakthrough volumes of 5 ml can be achieved when chloroform is used as the swelling agent. The required drying time is less than 1 minute. Quantitative desorption requires only 75 μl of organic solvent. Solvent elimination prior to transfer to the GC column is carried out using a PTV injector and a multidimensional GC system. The system is applied for the analyses of river water, urine, and serum samples.     

Unraveling the Rationale Behind Organic Solvent Stability of Lipases

Organic solvent-stable lipases have pronounced impact on industrial economy as they are involved in synthesis by esterification, interesterification, and transesterification. However, very few of such natural lipases have been isolated till date. A study of the recent past provided few pillars to rely on for this work. The three-dimensional structure, inclusive of the surface and active site, of 29 organic solvent-stable lipases was analyzed by subfamily classification and protein solvent molecular docking based on fast Fourier transform correlation approach. The observations revealed that organic solvent stability of lipases is their intrinsic property and unique with respect to each lipase. In this paper, factors like surface distribution of charged, hydrophobic, and neutral residues, interaction of solvents with catalytically immutable residues, and residues interacting with essential water molecules required for lipase activity, synergistically and by mutualism contribute to render a stable lipase organic solvent. The propensity of surface charge in relation to stability in organic solvents by establishing repulsive forces to exclude solvent molecules from interacting with the surface and prohibiting the same from gaining entry to the protein core, thus stabilizing the active conformation, is a new finding. It was also interesting to note that lipases having equivalent surface-exposed positive and negative residues were stable in a wide range of organic solvents, irrespective of their LogP values.     

To gel or not to gel: A prior prediction of gelation in solvent mixtures

The gelation behaviours of low molecular weight gelators 1,3:2,5:4,6-tris(3,4-dichlorobenzylidene)-D-mannitol(G1)and 2,4-(3,4-dichlorobenzylidene)-N-(3-aminopropyl)-D-gluconamide(G2)in 34 solvents have been studied.We found that sample dissolved at low concentrations may become a gel or precipitate at higher concentrations.The Hansen solubility parameters(HSPs)and a Teas plot were employed to correlate the gelation behaviours with solvent properties,but with no success if the concentration of the tests was not maintained constant.Instead,on the basis of the gelation results obtained for the G1 and G2 in single solvents,we studied the gelation behaviours of G1 and G2 in 23 solvent mixtures and found that the tendency of a gelator to form a gel in mixed solvents is strongly correlated with its gelation behaviours in good solvents.If the gelation occurs in a good solvent at higher concentrations,it will take place as well in a mixed solvent(the good solvent plus a poor solvent)at a certain volume ratio.In contrast,if the gelator forms a precipitate in a good solvent at higher concentrations,no gelation is to be observed in the mixed solvents.A gelation rule for mixed solvents is thus proposed,which may facilitate decision making with regard to solvent selection for gel formation in the solvent mixtures in practical applications.