Synthesis of novel bismaleimide monomers based on fluorene cardo moiety and ester bond: Characterization and thermal properties

Two novel bismaleimide monomers based on fluorene cardo moiety and ester bonds, namely 9, 9-bis[4-(4-maleimidobenzoate) phenyl]fluorene (PEFBMI) and 9,9-bis[4-(4-maleimidobenzoate)-3-methylphenyl]fluorene (MEFBMI) were designed and synthesized. Their structures were confirmed by FTIR, ¹H-NMR, ¹³C-NMR spectroscopy and Elemental analysis. Both monomers obtained have excellent solubility in some organic solvents with low boiling point, including acetone, chloroform and dichloromethane. The curing process of the monomers were investigated by DSC, displaying that the melting point of the monomers were 157.1°C and 193.6°C respectively, and all processing windows exceed 30°C. DMA results showed the glass transition temperature of the cured PEFBMI/glass cloth composite was higher than 390°C while that of the cured PEFBMI composite was 349.2°C. TGA results indicated that the cured BMI resins have good thermal stability and their 5% weight loss temperatures were both higher than 410°C.     

Kinetics and thermal properties of epoxy resins based on bisphenol fluorene structure

The fluorene-containing epoxy, diglycidyl ether of 9,9-bis(4-hydroxyphenyl) fluorene (DGEBF) was synthesized by a two-step reaction procedure. In order to investigate the relationship between fluorene structure and material properties, DGEBF and a commonly used diglycidyl ether of bisphenol A (DGEBA) were cured with 4,4-diaminodiphenyl methane (DDM) and 4,4-(9-fluorenylidene)-dianiline (FDA). The curing kinetics, thermal properties and decomposition kinetics of these four systems (DGEBA/DDM, DGEBF/DDM, DGEBA/FDA, and DGEBF/FDA) were studied in detail. The curing reactivity of fluorene epoxy resins was lower, but the thermal stability was higher than bisphenol A resins. The onset decomposition temperature of cured epoxy resins was not significantly affected by fluorene structure, but the char yield and T_g value were increased with that of fluorene content. Our results indicated that the addition of fluorene structure to epoxy resin is an effective method to improve the thermal properties of resins, but excess fluorene ring in the chain backbone can depress the curing efficiency of the resin.     

Enhanced thermal properties and flame retardancy from a thermosetting blend of a phosphorus‐containing bismaleimide and epoxy resins

Epoxy resins modified by an organosoluble phosphorus‐containing bismaleimide (3,3′‐bis(maleimidophenyl) ­phenylphosphine oxide; BMPPPO) were prepared by simultaneously curing epoxy/diaminodiphenylmethane (DDM), and BMPPPO. The resulted epoxy resins were found to exhibit glass transition temperatures as high as 212 °C, thermal stability at temperatures over 350 °C, and excellent flame retardancy with Limited oxygen index (LOI) values around 40. Incorporation of BMPPPO into epoxy resins via the thermosetting blend was demonstrated to be an effective way to enhance the thermal properties and flame retardancy simultaneously. Copyright © 2003 John Wiley & Sons, Ltd.     

Preparation and properties of modified bismaleimide resins by novel bismaleimide containing 1,3,4‐oxadiazole

Bismaleimide (BMI) resin is a high‐performance thermosetting polymer, but its inherent brittleness hinder a broader range of application. Therefore, it has aroused wide concern to improve the toughness of BMI resins without scarification of their thermal stability. This paper reported some studies on modified BMI resins based on diallyl bisphenol A, novel BMI monomers, e.g. 2‐[3‐(4‐maleimidophenoxy)phenyl]‐5‐(4‐maleimidophenyl)‐1,3,4‐oxadiazole (m‐Mioxd) or 2‐[4‐(4‐maleimidophenoxy)phenyl]‐5‐(4‐maleimidophenyl)‐1,3,4‐ oxadiazole (p‐Mioxd) in different proportions (0.87:1, 1:1, 1.2:1; mol/mol). The curing mechanism and kinetics of the copolymerized systems were investigated by differential scanning calorimetry and Fourier transform infrared spectroscopy. Thermogravimetric analysis was applied to study the thermal properties of the cured resins, and the results indicated that the modified resins had excellent thermal stability with high residual weight percentage at 700°C (>50%), temperatures for 5% weight loss around 400°C. Besides, N,N′‐4,4′‐bismaleimidodiphenylmethylene and O,O′‐diallyl bisphenol A resin blends were modified by m‐Mioxd and p‐Mioxd, respectively. We investigated the effects of mole concentration of m‐Mioxd or p‐Mioxd on the curing process, mechanical properties, fracture toughness, and heat resistance of the modified resins. The results revealed that the introduction of m‐Mioxd and p‐Mioxd could improve the impact property of the modified BMI resins. When their proportion was 0.07, the impact strength increased 123.8% and 108.3%, respectively. The novel chain‐extended BMIs could reduce the crosslink density of cured resins and improve the brittleness effectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and property of polyoxazolidone having fluorene moiety by polyaddition of diisocyanate and diepoxide

Polyoxazolidones having fluorenyl group were synthesized by polyaddition of 9,9‐diglycidyl fluorene with various diisocyanates. The polymer from 9,9‐diglycidyl fluorene and methylenediphenyl 4,4′‐diisocyanate was afforded in high yield although polydispersity of the polymer was found relatively broad. The IR spectrum of the obtained polymer showed two absorption in carbonyl region. One of them was assigned to the expected oxazolidone, while the other at 1710 cm^?1 appeared due to a carbonyl group of the isocyanurate moieties produced by cyclotrimerization of isocyanate. It is assumed that the cyclotrimerization would cause the broad polydispersity caused by the branched structure formed by isocyanurate. The polymers obtained with three kinds of diisocyanates (methylenediphenyl 4,4'‐diisocyanate, 1,6‐hexamethylene diisocyanate, 1,4‐phenylene diisocyanate) showed high thermal stability, as their T_d10 was depended on the structure of diisocyanate. All polymers had high transparency in a visible region. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1755–1760     

Synthesis and properties of novel cardo aromatic poly(ether‐benzoxazole)s

Three new bis(ether‐acyl chloride) monomers, 1,1‐bis[4‐(4‐chloroformylphenoxy)phenyl]cyclohexane ( 1a ), 5,5‐bis[4‐(4‐chloroformylphenoxy)phenyl]‐4,7‐methanohexahydroindan ( 1b ), and 9,9‐bis[4‐(4‐chloroformylphenoxy)phenyl]fluorene ( 1c ), were synthesized from readily available compounds. Aromatic polybenzoxazoles bearing ether and cardo groups were obtained by the low‐temperature solution polycondensation of the bis(ether‐acyl chloride)s with three bis(aminophenol)s and the subsequent thermal cyclodehydration of the resultant poly(o‐hydroxy amide)s. The intermediate poly(o‐hydroxy amide)s exhibited inherent viscosities in the range of 0.35–0.71 dL/g. All of the poly(o‐hydroxy amide)s were amorphous and soluble in many organic polar solvents, and most of them could afford flexible and tough films by solvent casting. The poly(o‐hydroxy amide)s exhibited glass‐transition temperatures (T_g's) in the range of 141–169 °C and could be thermally converted into the corresponding polybenzoxazoles approximately in the region of 240–350 °C, as indicated by the DSC thermograms. Flexible and tough films of polybenzoxazoles could be obtained by thermal cyclodehydration of the poly(o‐hydroxy amide) films. All the polybenzoxazoles were amorphous and showed an enhanced T_g but a dramatically decreased solubility as compared with their poly(o‐hydroxy amide) precursors. They exhibited T_g's of 215–272 °C by DSC and showed insignificant weight loss before 500 °C in nitrogen or air. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4014–4021, 2001     

Dielectric properties of self‐catalytic interpenetrating polymer network based on modified bismaleimide and cyanate ester resins

Bismaleimide (BMI) resins with good thermal stability, fire resistance, low water absorption, and good retention of mechanical properties at elevated temperatures, especially in hot/wet environments, have attracted more attention in the electronic and aerospace industries. However, their relatively high dielectric constant limits their application in the aforementioned fields. In this work, a new promising approach is presented that consists of the formation of a self‐catalytic thermoset/thermoset interpenetrating polymer network. Interpenetrating polymer networks (IPNs) based on modified BMI resin (BMI/DBA) and cyanate ester (b10) were synthesized via prepolymerization followed by thermal curing. The self‐catalytic curing mechanism of BMI/DBA‐CE IPN resin systems was examined by differential scanning calorimetry. The dielectric properties of the cured BMI/DBA‐CE IPN resin systems were evaluated by a dielectric analyzer and shown in dielectric properties‐temperature‐log frequency three‐dimensional plots. The effect of temperature and frequency on the dielectric constant of the cured BMI/DBA‐CE IPN resin systems is discussed. The composition effect on the dielectric constant of the cured IPN resin systems was analyzed on the basis of Maxwell's equation and rule of mixture. The obtained BMI/DBA‐CE IPN resin systems have the combined advantages of low dielectric constant and loss, high‐temperature resistance, and good processability, which have many applications in the microelectronic and aerospace industries. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1123–1134, 2003     

Effect of the substituted benzene group on thermal and mechanical properties of epoxy resins initiated by cationic latent catalysts

Epoxy resins (DGEBA) were cured by cationic latent thermal catalysts, that is, N‐benzylpyrazinium hexafluoroantimonate (BPH) and N‐benzylquinoxalinium hexafluoroantimonate (BQH) to investigate the effect of substituted benzene group on cure kinetics and mechanical properties of epoxy system. Differential scanning calorimetry (DSC) was undertaken for activation energy of the system. It was also characterized in terms of flexural, fracture toughness, and Izod impact strengths for the mechanical tests. As a result, the cure reaction of both epoxy systems resulted in an autocatalytic kinetic mechanism accelerated by hydroxyl groups. Also, the conversion and cure activation energy of the DGEBA/BQH system were higher than those of DGEBA/BPH system. The mechanical properties of the DGEBA/BQH system were also superior to those of the DGEBA/BPH system, as well as the morphology. This was probably due to the consequence of the effect of the substituted benzene group of the BQH catalyst, resulting in increasing the crosslinking density and structural stability in the epoxy system studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2419–2429, 2004     

Fluorenyl cardo copolyimides containing poly(ethylene oxide) segments: Synthesis,characterization, and evaluation of properties

A set of new block copolyimides containing fluorenyl cardo moieties (FR) in the polyimide blocks and poly(ethylene oxide) (PEO) sequences has been prepared using the two‐step method of polyimide synthesis. The combination of both moieties led to novel copolyimides with good solubility in a variety of solvents, which could easily be processed into films. Copolyimides with PEO content from 30 to 56 wt % were amorphous, showed good mechanical properties, and absorbed less water than other PEO‐containing polyimides previously reported. Copolyimides with higher PEO content (60 and 65%) showed crystallinity and yielded soft films. All of the copolymers showed two glass transition temperatures, the first one around ?25 °C attributed to the PEO segments, and the second one at much higher temperature, which corresponded to the polyimide domains. The thermal degradation occurred in two steps, the first one being associated with the degradation of the PEO segments and the second one with the generalized aromatic polyimide decomposition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8170–8178, 2008     

Influence of curing conditions on the morphology and physical properties of epoxy resins modified with a liquid polyamine

A diglycidyl ether of bisphenol-A (DGEBA) epoxy resin has been stoichiometrically cured with cycloaliphatic amine 4,4′-diamino-3,3′-dimethylcyclohexylmethane (3DCM) and modified with an amine terminated oligomer polyoxypropylenetriamine (POPTA) at a concentration of 15 wt %. Mixtures, postcured at the same temperature, have been precured at different temperatures. Phase separation takes place before gelation at all precure temperatures used. The variation in the glass transition region of the mixtures has been analyzed by dynamic mechanical measurements. Mechanical properties and fracture toughness of the modified mixtures have been related to their microstructural spherical features. Results are compared to those for the unmodified mixtures cured with different precure temperatures. © 1997 John Wiley & Sons, Inc.     

Mechanical and thermal properties of modified bismaleimide matrices toughened by polyetherimides and polyimide

Thermal and mechanical properties such as G_IC (critical strain energy release rate), K_IC (critical stress intensity factor), tensile, and flexural strength of bismaleimide (BMI) matrix toughened by commercially available polyetherimides (Ultem 1000P, Siltem STM 1700, and Extem VH1003) and polyimide P84 were investigated. In case of various contents, polyetherimides soluble in BMI phase separation was observed. The influence of the toughener amount on the mechanical properties of the matrices was studied. It was shown that Ultem and Siltem had a more significant influence on the G_IC and K_IC parameters than the more thermally stable P84 and Extem. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of novel silicone modified acrylic resins and their film properties

New silicone modified acrylic resins were synthesized and some of their film properties were investigated. At first, macromer (MC) was synthesized by the condensation reaction of the reactive polysiloxane intermediate (Z-6018) and 2-hydroxyethyl methacrylate (HEMA) in toluene as solvent at 110°C under nitrogen atmosphere. Then, MC was reacted with 2-dimethylaminoethyl methacrylate (DMAEMA) at different mole ratios (1:1, 1:3, 1:5) by using benzoyl peroxide as initiator in toluene to obtain novel silicone acrylic resins. These resins were characterized by Fourier Transform Infrared Spectrometry (FT-IR), and their thermal properties were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. The properties of the films prepared from these resins were determined. The results showed that these resins are thermally stable polymers and all films are flexible, semi-gloss and have excellent drying, adhesion properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Thermostable cyanate ester resins and POSS‐containing nanocomposites: influence of matrix chemical structure on their properties

Thermostable densely crosslinked cyanate ester resins (CER) with different chemical structures, derived from monomer dicyanate esters of bisphenol E (DCBE), bisphenol A (DCBA), hexafluorobisphenol A (6F‐DCBA) or from cyanated phenol‐formaldehyde oligomer PT‐30, and the nanocomposites based thereon, with 0.01 to 10 wt% epoxycyclohexyl‐functionalized polyhedral oligomeric silsesquioxane (ECH‐POSS), were synthesized and characterized by means of dynamic mechanical analysis, differential scanning calorimetry, far‐infrared, and creep rate spectroscopy techniques. As shown, thermal and mechanical properties increased in a row of matrices prepared from DCBE < DCBA < 6F‐DCBA < PT‐30. Thus, these matrices with T_g = 248, 275, 300, and ~400°C (DMA, 1 Hz), respectively, had dynamic modulus E′ values of 1.8, 2.7–3.0, and 3.6 GPa at 20°C; high rigidity (dynamic modulus of about 1–2 GPa) retained at temperatures up to 200°C for DCBE matrix, 250°C for DCBA and 6F‐DCBA matrices, but up to 380°C for PT‐30‐based matrix. The maximal effects from introducing ECH‐POSS nanoparticles, covalently embedded into CER network, were attained mainly at their ultra‐low contents (<<1 wt%); however, the ECH‐POSS impact decreases in a row of matrices prepared from DCBE > DCBA > 6F‐DCBA > PT‐30. Copyright © 2015 John Wiley & Sons, Ltd.     

Studies on epoxy resins cured by cationic latent thermal catalysts: The effect of the catalysts on the thermal,rheological, and mechanical properties

To investigate the effect of catalysts on the thermal, rheological, and mechanical properties of an epoxy system, a resin based on diglycidyl ether of bisphenol‐A (DGEBA) was cured by two cationic latent thermal catalysts, N‐benzylpyrazinium hexafluoroantimonate (BPH) and N‐benzylquinoxalinium hexafluoroantimonate (BQH). Differential scanning calorimetry was used for the thermal characterization of the epoxy systems. Near‐infrared spectroscopy was employed to examine the cure reaction between the DGEBA and the latent thermal catalysts used. The rheological properties of the blend systems were investigated under an isothermal condition with a rheometer. To characterize the mechanical properties of the systems, flexure, fracture toughness (K_IC), and impact tests were performed. The phase morphology was studied with scanning electron microscopy of the fractured surfaces of mechanical test samples. The conversion and cure activation energy of the DGEBA/BQH system were higher than those of the DGEBA/BPH system. The crosslinking activation energy showed a result similar to that obtained from the cure kinetics of the blend systems. The flexure strength, K_IC, and impact properties of the DGEBA/BQH system were also superior to those of the DGEBA/BPH system. This was a result of the substituted benzene group of the BQH catalyst, which increased the crosslink density and structural stability of the epoxy system studied. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 187–195, 2001     

Synthesis of mesoporous silica and its modification of bismaleimide/cyanate ester resin with improved thermal and dielectric properties

A novel method is proposed to synthesize new mesoporous silica containing amine groups (MPSA), and it was further employed to modify bismaleimide‐dialllyl bisphenol (BD)/cyanate ester (CE) resin to form novel MPSA/BD/CE hybrids; in addition, the typical properties of MPSA/BD/CE were systematically investigated. Results show that these hybrids have very low dielectric constant and loss as well as good thermal properties. Compared with BD/CE resin, all hybrids have not only decreased dielectric constant and loss but also similar dependence of dielectric properties on frequency over the whole frequency from 10 to 10⁶ Hz. Specifically, with the addition of MPSA to BD/CE resin, the dielectric constant reduces from 3.5 to 3.0, and the dielectric loss is only 85% of that of BD/CE resin. Note that all hybrids show better thermal resistance (reflected by higher glass transition temperature, decreased maximum degradation rate, and higher char yield at 800°C) than BD/CE resin. All these differences in macro‐properties are attributed to the different structure between MPSA/BD/CE hybrids and BD/CE resin. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal and electrical behavior of hybrid thermosets based on epoxy and maleimide resins cured with p-aminobenzoic acid

Two thermoset systems based on maleimides and diglycidyl ether of bisphenol A (DGEBA) cured with p-aminobenzoic acid were characterized in terms of thermal and electrical behavior. Thermal characterization has been undertaken by means of thermogravimetric analysis in nitrogen atmosphere up to 600°C using simultaneous thermogravimetric/Fourier transform infrared/mass spectrometry (TG/FT-IR/MS) analysis. In the first stage of thermal degradation, the global kinetic parameters [activation energy (E_a) and preexponential factor (log A₁ (s⁻¹))] were calculated using the isoconversional method of Friedman. The energies variation as well as the shape of the differential thermal analysis curves suggests that the thermal decomposition process occurred in multiple stages. The evolved gases analysis was conducted by simultaneous TG/FT-IR/MS coupled techniques. Dielectric relaxation spectroscopy characterization was also made.     

Synthesis and characterization of novel phenolic resins containing aryl‐boron backbone and their utilization in polymeric composites with improved thermal and mechanical properties

In the present study, a novel aryl‐boron‐containing phenolic resin named as PBPR has been synthesized from phenol and formaldehyde in the presence of phenylboronic acid. The chemical structure of the PBPR was confirmed by Fourier transform infrared, nuclear magnetic resonance and X‐ray photoelectron spectroscopy. The molecular weight, viscosity and curing behavior were examined to demonstrate that PBPRs have better processability than common boric acid‐modified phenolic resin. The thermal stability and fracture toughness of the cured PBPRs were greatly enhanced, where the char yield at 1000°C (nitrogen atmosphere) and the glass transition temperature reached 70.0% and 218°C, respectively. The excellent mechanical and ablative properties of the PBPR composites may have benefited from the good interfacial adhesion between the resin matrix and the reinforced fiber. The flexural strength and the linear ablative rate are 436.8 ± 5.2 MPa and 0.010 mm/sec, respectively. This study opens a new window for the preparation of high‐performance ablative composites by designing a resin matrix containing an aryl‐boron backbone. Copyright © 2013 John Wiley & Sons, Ltd.     

Two novel oligomers based on fluorene and pyridine: Correlation between the structures and optoelectronic properties

To investigate the fine optoelectronic difference of the target oligomers with or without peripheral fluorene moieties, two dumbbell‐shaped oligomers ( F0 and F1 ) were designed and convergently prepared via Suzuki coupling reaction. The molecular structures of the oligomers were fully characterized by ¹H NMR, ¹³C NMR, and MALDI‐TOF mass spectra, respectively. The absorption, photoluminescent behavior, and energy band gaps of the oligomers were examined through UV–vis, photoluminescent spectra and cyclic voltammetry. The experimental results demonstrate that the absorption and photoluminescent properties are little affected by molecular architecture, while the absolute photoluminescence quantum efficiency of films and energy band gaps derived from cyclic voltammetry in solution are strongly correlated with the molecular frameworks. The observed energy band gaps of oligomers are further validated by the different molecular orbital contours of the HOMO energy levels from theoretical calculations. Preliminary electroluminescent investigations for F1 have also been conducted and discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1548–1558, 2008     

Theoretical studies on the electronic and optical properties of two new alternating fluorene/carbazole copolymers

Poly(fluorene)-type materials are widely used in polymer-based emitting devices. During operation there appears, however, an additional emission peak at around 2.3 eV, leading to both a color instability and reduced efficiency. The incorporation of the carbazole units has been proven to efficiently suppress the keto defect emission. In this contribution, we apply quantum-chemical techniques to investigate two series of alternating fluorene/carbazole oligomers and copolymers poly[2,7-(N-(2-methyl)-carbazole)-co-alt-2,7-m(9,9-dimethylfluorene)], namely, PFmCz (m = 1,2) and gain a detailed understanding of the influence of carbazole units on the electronic and optical properties of fluorene derivatives. The electronic properties of the neutral molecules, HOMO-LUMO gaps (Delta(H-L)), in addition to the positive and negative ions, are studied using B3LYP functional. The lowest excitation energies (E(g)s) and the maximal absorption wavelength lambda(abs) of PFmCz (m = 1,2) are studied, employing the time-dependent density functional theory (TD-DFT). The properties of the two copolymers, such as Delta(H-L), E(g), IPs, and EAs were obtained by extrapolating those of the oligomers to the inverse chain length equal to zero (1/n = 0). The outcomes showed that the carbazole unit is a good electron-donating moiety for electronic materials, and the incorporation of carbazole into the polyfluorene (PF) backbone resulted in a broadened energy gap and a blue shift of both the absorption and photoluminescence emission peaks. Most importantly, the HOMO energies of PF1Cz and PF2Cz are both a higher average (0.4 eV) than polyfluorene (PF), which directly results in the decreasing of IPs of about 0.2 eV more than PF, indicating that the carbazole units have significantly improved the hole injection properties of the copolymers. In addition, the energy gap tends to broaden and the absorption and emission peaks are gradually blue-shifted to shorter wavelengths with an increase in the carbazole content in the copolymers. This is due to the interruption of the longer conjugation length of the backbone in the (F1Cz)(n) series.