Determination of some trace metals with a new synthesized polymer resin by FAAS in various tea and herbal plants samples

In this work, a new polymer resin with a functional groups capable of holding trace metals has been synthesized. The structure of polymer resin has been examined by BET-N₂ method analyzer, IR spectrometer, scanning electron microscope (SEM) and elemental microanalyser. The synthesized polymer resin was used for the simultaneous separation and preconcentration of the trace metals from various tea and herbal plants samples. After extraction process, flame atomic absorption spectrometry (FAAS) was used to determine the trace metals. The analytical parameters and solid phase extraction (SPE) performance such as pH, sample volume, flow rates of sample, flow rates of eluent, concentration, volume and type of eluent and effect of interference ions, were investigated. The limits of detection (DL) of the SPE procedure for trace metals, were calculated to be (3s) in the range of 0.9?4.0 μg L^?1 (n = 21) and the factors of preconcentration (PF) were obtained at 200 for Cd, Co, Cu, Fe, Ni and Zn, and at 50 for Cr, Mn and Pb ions and the relative standard deviation (RSD) at ≤ 2% (n = 11).     

Spectrafluorimetric method for the rapid screening of toxic heavy metals in water samples

A fast and inexpensive sensitive screening test for recognising potential wastewater contamination by the presence of highly toxic heavy metals is described. The test is based on the reaction of the toxic heavy metals Hg(II), Cd(II), Pb(II) and Ag(I) with 6-mercaptopurine (6-MP) to produce highly fluorescent complexes.Optimum experimental conditions include a buffer of pH 7.2 (0.1 M citric acid/0.2 M Na₂HPO₄), a chelating reagent concentration of 6×10⁻⁴ M and the addition of 10⁻⁴ M of o-phenanthroline. The fluorescence emitted by the complexes was measured at 380 and 540 nm for excitation and emission wavelengths, respectively.Detection limits of 4, 3, 6 and 3 μg l⁻¹ were achieved for Hg, Cd, Pb and Ag. Relative standard deviation (R.S.D.) were between ±2 and ±6% of the fluorescence signals for five identical samples. Potential interference effects from other heavy metals (Zn, Mn, Co, Fe, Ni and Cu), which could affect the response of the proposed screening test was investigated. Results showed that none of these metals give rise to noticeable fluorescence signals under the above described experimental conditions.Finally, the capability of the proposed heavy metal screening test for the analysis of contaminated water samples is discussed.     

Solid-phase extraction using multiwalled carbon nanotubes and quinalizarin for preconcentration and determination of trace amounts of some heavy metals in food,water and environmental samples

A solid phase extraction procedure has been developed using multiwalled carbon nanotubes (MWCNTs) as a solid sorbent and quinalizarin [1,2,5,8-tetrahydroxyanthracene-9,10-dione] as a chelating agent for separation and preconcentration of trace amounts of some heavy metal ions, Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) before their determination by flame atomic absorption spectroscopy (FAAS). The influences of the analytical parameters, including pH, amounts of quinalizarin and adsorbent, sample volume, elution conditions such as volume and concentration of eluent, flow rates of solution and matrix ions, were investigated for the optimum recoveries of the analyte ions. No interference effects were observed from the foreign metal ions. The preconcentration factor was 100. The detection limit (LOD) for the investigated metals at the optimal conditions were observed in the range of 0.30–0.65 μg L^?1. The relative standard deviation (RSDs), and the recoveries of standard addition for this method were lower than 5.0% and 96–102%, respectively. The new procedure was successfully applied to the determination of analytes in food, water and environmental samples with satisfactory results.     

Selective solid-phase extraction of amoxicillin and cephalexin from urine samples using a molecularly imprinted polymer

In this paper we describe, for the first time, a molecularly imprinted polymer (MIP) for the antibiotic amoxicillin (AMX), synthesised by a noncovalent molecular imprinting approach and used to extract AMX selectively from urine samples. The MIP was applied as a molecularly selective sorbent in molecularly imprinted SPE (MISPE) in an off-line mode, where it showed useful cross-selectivity for a structurally related antibiotic, cephalexin (CPX). By using a MISPE protocol, the MIP was able to selectively extract both AMX and CFX from 5 mL of water spiked with 10 mg/L with recoveries of 75 and 78% for AMX and CFX, respectively. When applied to real samples (urine) at clinically relevant concentrations, recoveries from 2 mL of human urine spiked with 20 mg/L decreased slightly to 65 and 63% for AMX and CFX, respectively. To demonstrate further the selectivity of the MIP obtained, a comparison with commercially available SPE cartridges was performed. Improvements in the retention of both AMX and CFX on the MIP were obtained relative to the commercially available cartridges, and the MISPE extracts were considerably cleaner, due to molecularly selective analyte binding by the MIP.     

Selective enrichment of anti-inflammatory drugs from river water samples by solid-phase extraction with a molecularly imprinted polymer

A molecularly imprinted polymer (MIP) is synthesised by a noncovalent protocol in which ibuprofen was used as a template molecule. The polymer was evaluated chromatographically and it was seen that the MIP showed cross-reactivity. Subsequently, when this polymer was used as sorbent in SPE it was possible to selectively extract a mixture of nonsteroidal anti-inflammatory drugs from aqueous samples when a cleanup step with dichloromethane was performed. The performance of the MIP was evaluated with river water and water from a wastewater treatment plant, and compared with the performance of a commercial Isolute ENV+ sorbent.     

Speciation of chromium in water using crosslinked chitosan-bound FeC nanoparticles as solid-phase extractant, and determination by flame atomic absorption spectrometry

Crosslinked chitosan-bound FeC nanoparticles (CCBFeCNP) were prepared, and the adsorptive behavior of Cr(III) and Cr(VI) on CCBFeCNP were assessed. At pH 6.0–10.0, CCBFeCNP is selective towards Cr(III) but hardly selective towards Cr(VI). The retained Cr(III) is subsequently eluted with 0.5 mol L⁻¹ HCl. Total chromium is determined after reduction of Cr(VI) to Cr(III) by ascorbic acid. A new method of flow injection using a micro-column packed with CCBFeCNP as solid phase extractant has been developed for speciation of Cr(III) and Cr(VI) in water samples, followed by flame atomic absorption spectrometry. The effects of pH, sample flow rate and volume, elution solution and interfering ions on the recoveries of Cr(III) were systematically investigated. Under optimum conditions, the adsorption capacity of CCBFeCNP for Cr(III) is 10.5 mg g⁻¹ at pH 7.5. The procedure presented was applied to chromium speciation in water samples, and the results were satisfactory.     

Direct determination of ciprofloxacin by mass spectrometry after a two-step solid-phase extraction using a molecularly imprinted polymer

A molecularly imprinted polymer (MIP) has been prepared for the first time with ciprofloxacin (CIPRO) as the template molecule, via a noncovalent synthetic procedure. Prior to its use as a sorbent in SPE, the MIP was evaluated chromatographically to confirm that it was indeed molecularly imprinted. The MIP was then used to extract CIPRO selectively from urine samples by means of a two-step SPE procedure in which a commercial Oasis cartridge and a molecularly imprinted SPE cartridge were combined in series. This approach allowed the matrix compounds present in the samples to be removed effectively. The urine extracts obtained after this two-step SPE procedure was applied were relatively clean compared to the original samples, and this made it possible to inject directly the extracts into a mass spectrometer and thus quantify CIPRO in urine samples at low levels and reduce the time of analysis.     

Simple and rugged SPE method for the determination of tetracycline antibiotics in serum by HPLC using a volatile mobile phase

Summary A simple and rugged SPE method for the determination of tetracycline (TC), minocycline (MC) and demeclocycline (DCC) in porcine serum by high performance liquid chromatography (HPLC) was developed. The spiked serum sample was pretreated with 2% phosphoric acid followed by a simple and rugged solid-phase extraction procedure using the Oasis^TM HLB extraction cartridges. High and reproducible recoveries were obtained even though the cartridges were run dry. The extracted sample analytes were injected onto a Waters SymmetryShield^TM RP₈ column. The mobile phase was a simple volatile solution containing 0.1% TFA, 2% methanol and 7% acetonitrile in Water. The antibiotics were detected at 350 nm. The calibration curves were linear from 2.0 to 25.0 μg mL⁻¹ of TC and MC with DCC as the internal standard at a concentration of 25.0 μg mL⁻¹. For six replicate analyses, the average recoveries of TC and MC from porcine serum sample fortified at the level of 2.5 μg mL⁻¹ were 96.1% with 1.3% RSD and 101% with 0.54% RSD; at level of 0.5 μg mL⁻¹ the average recoveries were 88% with 1.6% RSD and 97.8% with 1.4% RSD.     

Copper determination in natural water samples by using FAAS after preconcentration onto amberlite XAD-2 loaded with calmagite

A procedure for separation and preconcentration of trace amounts of copper in natural water samples, has been proposed. It is based on the adsorption of copper(II) ions onto a column of Amberlite XAD-2 resin loaded with calmagite reagent. This way amounts of copper within the range from 0.0125 to 25.0 μg, in a sample volume of 25 to 250 ml, and pH from 3.7 to 10.0 was concentrated as calmagite complex in a column of 0.50 g of Amberlite XAD-2 resin. Copper (II) ion was desorpted by using 5.0 ml of 2 mol l⁻¹ hydrochloric acid. Detection and determination limits of the proposed procedure for 250 ml sample volume were 0.15 and 0.50 μg l⁻¹, respectively. Selectivity test showed that (in the indicated concentration), calcium(II) (500 mg l⁻¹), magnesium(II) (500 mg l⁻¹), strontium(II) (50 mg l⁻¹), iron(III) (10 mg l⁻¹), nickel(II) (10 mg l⁻¹), cobalt(II) (10 mg l⁻¹), cadmium(II) (10 mg l⁻¹) and lead(II) (10 mg l⁻¹) did not interfere in copper determination by this procedure. Precision of the method, evaluated as the relative standard deviation by analyzing a series of seven replicates, was 2.42% for a copper mass of 1.0 μg in a sample volume of 100 ml. The accuracy of the proposed procedure was evaluated by means of copper determination in reference biological samples. The achieved results were in good agreement with certified values. The extractor system had a sorption capacity of 1.59 μmol of copper per gram of resin loaded with calmagite. The proposed procedure was applied for copper determination by FAAS in natural water samples. Samples were collected from different places of Salvador city, Bahia, Brazil. The achieved recovery, measured by the standard addition technique, showed that the proposed procedure had good accuracy. A good enrichment factor (50×) and simplicity are the main advantages in this analytical procedure.     

Sensitive determination of phenols in environmental water samples with SPE packed with bamboo carbon prior to HPLC

Bamboo carbon, an inexpensive, readily available material, has attracted great attention in recent years because of adsorptive properties. In this paper, the potential of bamboo carbon as a SPE adsorbent for the determination of phenols, was investigated. Phenols are important environmental contaminants that may adversely affect human health. Parameters influencing extraction efficiency, including type of eluent, eluent volume, amount of adsorbent, as well as sample pH, volume, and flow rate were investigated and optimized. The optimized results exhibited excellent linear relationships between peak area and phenol concentrations over the range of 2.0–100 ng/mL, with precision between 2.2–7.2%. The LODs were 0.06–0.4 ng/mL for the eight phenols tested. The proposed method has been successfully applied to the analysis of several real‐world environmental water samples. These results indicate that bamboo carbon may be used as a novel SPE adsorbent for the concentration and determination of phenols in real environmental water samples.     

Application of multiwalled carbon nanotubes as solid phase extraction sorbent for preconcentration of trace copper in water samples

The adsorption behavior of multiwalled carbon nanotubes (MWNTs) toward copper has been investigated systemically, and a new method has been developed for the determination of trace copper in water samples based on preconcentration with a microcolumn packed with MWNTs prior to its determination by flame atomic absorption spectrometry. The optimum experimental parameters for preconcentration of copper, such as pH of the sample, sample flow rate and volume, elution solution and interfering ions, have been investigated. Copper can be quantitatively retained by MWNTs in the pH range 5-8, and then eluted completely with 0.5 M HNO3. The detection limit of this method for Cu was 0.42 ng/mL, and the RSD was 3.5% at the 10 ng/mL Cu level. The method was validated using a certified reference material, and has been successfully applied for the determination of trace copper in water samples.     

Solid phase extraction-spectrophotometric determination of fluoride in water samples using magnetic iron oxide nanoparticles

A new, sensitive, fast and simple method using magnetic iron oxide nanoparticles (MIONs), as an adsorbent has been developed for extraction, preconcentration and determination of traces of fluoride ions. The determination method is based on the discoloration of Fe(III)-SCN complex with extracted fluoride ions which was subsequently monitored spectrophotometrically at λ_max = 458 nm. Various parameters affecting the adsorption of fluoride by the MIONs have been investigated, such as pH of the solution, type, volume and concentration of desorbing reagent, amount of adsorbent and interference effects. A linear response for the determination of fluoride was achieved in the concentration range of 0.040-1.250 μg mL⁻¹. The limit of detection (LOD) and limit of quantification (LOQ) for fluoride based on 3 times and 10 times the standard deviation of the blank (3S_b, 10S_b) were 0.015 and 0.042 μg mL⁻¹ (n = 20) for fluoride ion, respectively. A preconcentration factor of 50 was achieved in this method. The proposed procedure has been applied for determination of fluoride concentration in various water samples. The results obtained from this method were successfully compared with those provided by standard SPADNS method.     

Simultaneous isolation and determination of esculin and rutin in natural materials using SPE and HPLC

Summary Esculin (ESC) and rutin (RUT) have been simultaneously isolated from pharmaceutical natural materials by solid phase extraction (SPE). Determination of both substances was performed by reversed phase high performance liquid chromatography (RPHPLC) with UV detection. Optimization of the separation conditions showed that simultaneous isolation and determination of rutin and esculin from pharmaceutical material was possible. The recovery obtained was not lower than 95±2%.     

自制固相微萃取装置对水中5种农药残留量的分析

合成了一种丙烯酸酯聚合物,并将其作为固相微萃取涂层,使用自制的SPME装置和气质联用仪对水样中5种农药残留量进行分析,该装置制作简单、价格低廉.对影响分析灵敏度的各种实验因素进行了优化,在优化条件下分析5种农药标准样品质量浓度在1～1000 μg/L内与色谱峰面积呈良好的线性关系(r=0.995～0.999),检出限为0.391～1.170 ng/L.将自制涂层与商品涂层(PA)进行了比较,自制涂层对5种农药具有优良的吸附特性,较低的检出限.     

Solid phase extraction preconcentration of cobalt and nickel with 5,7-dichloroquinone-8-ol embedded styrene-ethylene glycol dimethacrylate polymer particles and determination by flame atomic absorption spectrometry (FAAS)

This article explores the synthesis of styrene-divinyl benzene (DVB)/ethylene glycol dimethacrylate (EGDMA) polymers embedded with quinoline-8-ol (Q) or its dihalo derivatives by thermal means in the presence and absence of 4-vinyl pyridine (VP). The above-synthesized polymers were found to enrich cobalt and nickel present in admixtures. Of these, 5,7-dichloroquinoline-8-ol (DCQ) embedded styrene-EGDMA polymer particles enrich cobalt and nickel quantitatively from dilute aqueous solutions within 5 min of preconcentration time. Styrene-EGDMA, DCQ embedded styrene-EGDMA particles obtained by bulk polymerization and cobalt/nickel bonded polymers were characterized by FTIR, thermogravimetric analysis (TGA), elemental analysis and surface area studies. The use of these polymer particles obtained by bulk polymerization for the solid phase extractive preconcentration of cobalt and nickel was investigated in detail and explores the possibility of employing this procedure for the analysis of cobalt and nickel in soil and sediment samples using a simple, low cost and readily available flame atomic absorption spectrometric instrument was explored.     

Simultaneous trace-levels determination of Hg(II) and Pb(II) ions in various samples using a modified carbon paste electrode based on multi-walled carbon nanotubes and a new synthesized Schiff base

A modified carbon paste electrode based on multi-walled carbon nanotubes (MWCNTs) and 3-(4-methoxybenzylideneamino)-2-thioxothiazolodin-4-one as a new synthesized Schiff base was constructed for the simultaneous determination of trace amounts of Hg(II) and Pb(II) by square wave anodic stripping voltammetry. The modified electrode showed an excellent selectivity and stability for Hg(II) and Pb(II) determinations and for accelerated electron transfer between the electrode and the analytes. The electrochemical properties and applications of the modified electrode were studied. Operational parameters such as pH, deposition potential and deposition time were optimized for the purpose of determination of traces of metal ions at pH 3.0. Under optimal conditions the limits of detection, based on three times the background noise, were 9.0 × 10⁻⁴ and 6.0 × 10⁻⁴ μmol L⁻¹ for Hg(II) and Pb(II) with a 90 s preconcentration, respectively. In addition, the modified electrode displayed a good reproducibility and selectivity, making it suitable for the simultaneous determination of Hg(II) and Pb(II) in real samples such as sea water, waste water, tobacco, marine and human teeth samples.     

Application of a new resin functionalised with 6-mercaptopurine for mercury and silver determination in environmental samples by atomic absorption spectrometry

Polystyrene–divinylbenzene (8%) has been functionalised by coupling it through an ---N=N--- group with 6-mercaptopurine. The resulting chelating resin has been characterised by using elemental analysis, thermogravimetric analysis and infrared spectra. The resin is highly selective for Hg(II) and Ag(I) and has been used for preconcentrating Hg(II) and Ag(I) prior to their determination by atomic absorption spectrometry. The maximum sorption capacity for Hg(II) and Ag(I) was found to be 1.74 and 0.52 mmol g⁻¹, respectively, over the pH range 5.5–6.0. The calibration range for Hg(II) was linear up to 10 ng ml⁻¹ with a 3σ detection limit of 0.02 ng ml⁻¹; the calibration range for Ag(I) was linear up to 5 μg ml⁻¹ with a detection limit of 29 ng ml⁻¹. The recoveries of the metals were found to be 99.7±3.8 and 101.3±4.1% at the 95% confidence level for both Hg(II) and Ag(I). In column operation, it has been observed that Hg(II) and Ag(I) in trace quantities can be selectively separated from geological, medicinal and environmental samples.     

Fluorescent determination of graphene quantum dots in water samples

This work presents a simple, fast and sensitive method for the preconcentration and quantification of graphene quantum dots (GQDs) in aqueous samples. GQDs are considered an object of analysis (analyte) not an analytical tool which is the most frequent situation in Analytical Nanoscience and Nanotechnology. This approach is based on the preconcentration of graphene quantum dots on an anion exchange sorbent by solid phase extraction and their subsequent elution prior fluorimetric analysis of the solution containing graphene quantum dots. Parameters of the extraction procedure such as sample volume, type of solvent, sample pH, sample flow rate and elution conditions were investigated in order to achieve extraction efficiency. The limits of detection and quantification were 7.5 μg L⁻¹ and 25 μg L⁻¹, respectively. The precision for 200 μg L⁻¹, expressed as %RSD, was 2.8%. Recoveries percentages between 86.9 and 103.9% were obtained for two different concentration levels. Interferences from other nanoparticles were studied and no significant changes were observed at the concentration levels tested. Consequently, the optimized procedure has great potential to be applied to the determination of graphene quantum dots at trace levels in drinking and environmental waters.     

A solid phase extraction using a chelate resin immobilizing carboxymethylated pentaethylenehexamine for separation and preconcentration of trace elements in water samples

A chelate resin immobilizing carboxymethylated pentaethylenehexamine (CM-PEHA resin) was prepared, and the potential for the separation and preconcentration of trace elements in water samples was evaluated through the adsorption/elution test for 62 elements. The CM-PEHA resin could quantitatively recover various elements, including Ag, Cd, Co, Cu, Fe, Ni, Pb, Ti, U, and Zn, and rare earth elements over a wide pH range, and also Mn at pH above 5 and V and Mo at pH below 7. This resin could also effectively remove major elements, such as alkali and alkaline earth elements, under acidic and neutral conditions. Solid phase extraction using the CM-PEHA resin was applicable to the determination of 10 trace elements, Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, V, and Zn, in certified reference materials (EnviroMAT EU-L-1 wastewater and ES-L-1 ground water) and treated wastewater and all elements except for Mn in surface seawater using inductively coupled plasma atomic emission spectrometry. The detection limits, defined as 3 times the standard deviation for the procedural blank using 500 mL of purified water (50-fold preconcentration, n = 8), ranged from 0.003 μg L⁻¹ (Mn) to 0.28 μg L⁻¹ (Zn) as the concentration in 500 mL of solution.     

Determination of gadolinium in river water by SPE preconcentration and ICP-MS

An analytical scheme was developed for the determination of Gd-diethylenetriaminepentaacetate (Gd-DTPA), Gd and the other rare earth elements (REE) in river water by inductively coupled plasma (quadrupole) mass spectrometry (ICP-Q-MS). The preconcentration step was essential, since the limits of detection of this multielemental analytical technique are higher than the trace concentrations of the interesting elements in river water.Solid phase extraction (SPE) with different commercially available complexing agents (Chelex 100, Toyopearl and ethylhexylphosphates) was employed for the preconcentration of REE. The investigations revealed that complex stability (varying in dependence of the pH value) has a strong influence on the degree of the enrichment of Gd-DTPA. Based on acidified water samples (pH<3) a procedure using ethylhexylphosphates was proposed for the preconcentration of Gd and REE from surface water samples. For this purpose C₁₈-cartridges loaded with ethylhexylphosphates were used, resulting in an enrichment factor of 40.