Rapid Determination of Cotton Content in Textiles by Near-Infrared Spectroscopy and Interval Partial Least Squares

Textile products must be marked by fabric type and composition on the label and cotton is by far the most important fiber in the industry and often needs fast quantitative analysis. The corresponding standard methods are very time-consuming and labor-intensive. The work focuses on exploring the feasibility of combining near-infrared (NIR) spectroscopy and interval-based partial least squares (iPLS) for determining cotton content in textiles. Three types of partial least square (PLS)-based algorithms were used for experimental measurements. A total of 91 cloth samples with cotton content ranging from 0 to 100% (w/w) were collected and all compositions are commercially available on the market in China. In all cases, the original spectrum axis was split into 20 subintervals. As a result, three final models, i.e., the iPLS model on a single subinterval, the backward interval partial least squares (biPLS) model on the region remaining six subintervals, and the moving window partial least squares (mwPLS) model with a window of 75 variables, achieved better results than the full-spectrum PLS model. Also, no obvious differences in performance were observed for the three models. Thus, either iPLS or mwPLS was preferred considering their simplicity, which suggested that iPLS and mwPLS combined with NIR technique may have potential for the rapid determination of the cotton content of textile products with comparable accuracy to standard procedures. In addition, this approach may have commercial and regulatory advantages that avoid labor-intensive and time-consuming chemical analysis.     

Determination of Chlorpyrifos Residue by Near-Infrared Spectroscopy in White Radish Based on Interval Partial Least Square (iPLS) Model

Abstract

This article presents a multivariate method of rapidly determining chlopyrifos residue in white radish, based on near-infrared spectroscopy and partial least squares (PLS) regression. Interval PLS (iPLS) was utilized to select the optimum wave number range. The number of PLS components and the number of intervals were optimized according to root mean square error of prediction (RMSEP) and correlation coefficient (R) in prediction set. The result showed that the iPLS model was more reliable than the full model and that near-infrared spectroscopy with iPLS algorithm could be used successfully to analyze chlorpyrifos residue in white radish.     

Determination of Quercetin in Extracts of Ginkgo biloba L. Leaves by Near‐Infrared Reflectance Spectroscopy Based on Interval Partial Least‐Squares (iPLS) Model

Abstract

This paper developed a multivariate method of analysis of quercetin in Ginkgo biloba leaf extracts, based on reflectance NIR measurements and partial least squares regression. In order to give a better correlation with the results obtained by HPLC, multiplicative scatter correction (MSC) was utilized to correct scattering effect and interval partial least squares (iPLS) to select optimum wavelength region. In general, good calibration statistics were obtained for the prediction of quercetin content, as demonstrated by some figures of merit, namely linearity, repeatability, and accuracy. And the iPLS model was more reliable than the full model.     

Enhanced Characterization of Naproxen Formulation by Near Infrared Spectroscopy

Near infrared spectroscopy in combination with appropriate chemometric methods is an effective technique for quantitative analysis of parameters of interest for the pharmaceutical industry. In this study, the artificial neural network (ANN) was applied to monitor critical parameters (compression force, tablet hardness, mean particle size, and active pharmaceutical ingredient concentration of tablets) in the process of naproxen pharmaceutical preparation. The performance of ANN was compared to linear methods (partial least squares regression (PLS) and synergy interval partial squares (siPLS)). The ANN models for compression force, tablet hardness, mean particle size, and active pharmaceutical ingredient concentration of tablets yielded the low root mean square error of prediction (RMSEP) values of 0.936 KN, 0.302 kg, 4.49 mg, and 2.14 µm, respectively. The predictive ability of the PLS model was improved by siPLS with selection of spectral regions and the best performance among all calibration methods was showed by the nonlinear method (ANN). Effective models were built by using these approaches using near infrared spectroscopy.     

Near Infrared Spectral Similarity Combined with Variable Selection Method in the Quality Control of Flos Lonicerae: A Preliminary Study

This paper indicates the possibility to use near infrared (NIR) spectral similarity as a rapid method to estimate the quality of Flos Lonicerae. Variable selection together with modelling techniques is utilized to select representative variables that are used to calculate the similarity. NIR is used to build calibration models to predict the bacteriostatic activity of Flos Lonicerae. For the determination of the bacteriostatic activity, the in vitro experiment is used. Models are built for the Gram‐positive bacteria and also for the Gram‐negative bacteria. A genetic algorithm combined with partial least squares regression (GA‐PLS) is used to perform the calibration. The results of GA‐PLS models are compared to interval partial least squares (iPLS) models, full‐spectrum PLS and full‐spectrum principal component regression (PCR) models. Then, the variables in the two GA‐PLS models are combined and then used to calculate the NIR spectral similarity of samples. The similarity based on the characteristic variables and full spectrum is used for evaluating the fingerprints of Flos Lonicerae, respectively. The results show that the combination of variable selection method, modelling techniques and similarity analysis might be a powerful tool for quality control of traditional Chinese medicine (TCM).     

基于灰狼算法的近红外光谱变量选择方法研究

基于群体智能的灰狼优化(GWO)算法具有参数少、结构简单、易于实现的优点,但在光谱领域的应用较少。该研究将GWO算法引入近红外光谱的变量筛选中,以玉米数据为例,考察了GWO算法中狼群性能、迭代次数、狼群数量及运算效率,并建立了偏最小二乘(PLS)模型对玉米样品中蛋白质、脂肪、水分以及淀粉含量的测定。结果显示,GWO算法运算效率很高,经过参数调优后建立PLS模型,其蛋白质、脂肪、水分及淀粉的保留变量数分别为19、19、14、34,预测均方根误差(RMSEP)从全波长PLS建模的0.245 8、0.122 4、0.339 8、1.105 8分别下降到0.147 7、0.080 1、0.176 2、0.739 8,分别下降了40%、35%、48%、33%,相关系数也相应地提高。因此,GWO算法不仅优化速度快,选择变量数少,还可以显著提高PLS模型的预测精度,是一种近红外光谱变量选择的有效方法。     

Determination of API Gravity and Total and Basic Nitrogen Content by Mid- and Near-Infrared Spectroscopy in Crude Oil with Multivariate Regression and Variable Selection Tools

Abstract

American Petroleum Institute (API) gravity is an important parameter in the crude oil industry and the nitrogen compounds are related to the toxic effects of the oil in refineries and the environment. In this paper, 194 crude oil samples with API gravities ranging from 11.4 to 57.5 were used for the purpose of estimating the physicochemical properties: API gravity, total nitrogen content (TNC) and basic nitrogen content (BNC). Initially, infrared spectra in the mid and near regions (MIR and NIR) were collected, then full-spectral partial least squares (PLS) and the orthogonal projections to latent structures (OPLS) chemometric models were developed and validated, as well as models using interval PLS (iPLS), synergy interval PLS (siPLS) and competitive adaptive reweighted sampling PLS (CARSPLS) as variable selection tools. For API gravity and TNC, the best calibration technique is the NIR CARSPLS with a root mean square error of prediction (RMSEP) values of 0.9 and 0.0275?wt%, respectively. For BNC, the best technique is MIR siPLS with a prediction error of 0.0134?wt%. The results were validated based on the evaluation of the figures of merit, a statistical evaluation of the accuracy, characterization of the systematic error and measurement for errors in the residues. The results were satisfactory considering the high variability of the data and the diversity of the samples, demonstrating suitable applicability for practical analysis.     

Evaluation of near-infrared chemical imaging for the prediction of surface water quality parameters

Near-infrared (NIR) chemical imaging is an emerging technique with the potential for the detection of contaminants in the environmental field. In this study the potential of NIR chemical imaging (NIR-CI) to predict concentrations of nutrients (total nitrogen, total phosphorus) and indicator microorganisms (Escherichia coli) in surface water was investigated. Chemical images of multiple samples were obtained simultaneously using a pushbroom imaging system operating in the 950–1650 nm wavelength range with spectral resolution of 7 nm. Using partial least squares regression models, the relationship between these pollutants and NIR spectral data extracted from the chemical images in samples of aqueous surface water and filtered residue from surface water was assessed. When calibration models were tested on an independent data set, it was found that models developed on filtered residue spectra outperformed those developed on aqueous samples. For samples of filtered residue, the performance of the calibrations achieved for total nitrogen was reasonable (R² > 0.75); however, performance for total phosphorus and E. coli was poor (R² < 0.5). Lower concentrations of these parameters were detected in the surface water samples included in the study (<1 mg L^?1 and <20 colony-forming units per 100 mL, respectively), a likely reason for the poor performance. The results indicate that NIR-CI has the potential for screening samples in which the contaminant concentration exceeds 1 mg L^?1.     

紫外光谱法对维生素E油酸酯、维生素E与油酸的同时测定

建立了混合体系中维生素E、油酸和维生素E油酸酯同时测定的方法,用光纤光谱仪获取混合体系紫外-可见透射光谱.实验按均匀设计建立校正集和预测集,在255 ～315 nm波段采用偏最小二乘法建立了同时定量测定该3组分的校正模型,并用间隔区间偏最小二乘法(iPLS)通过优选建模区间改进油酸的预测模型.采用iPLS能够显著提高模型准确度,尤其对光谱弱响应的物质,最大相对误差从PLS直接建模的54.7%降至iPLS的8.98%,建立的模型可满足动力学研究的原位分析需要.     

Near-infrared spectroscopic determination of human serum albumin, γ-globulin, and glucose in a control serum solution with searching combination moving window partial least squares

Near-infrared (NIR) spectra in the region of 5000-4000 cm⁻¹ with a chemometric method called searching combination moving window partial least squares (SCMWPLS) were employed to determine the concentrations of human serum albumin (HSA), γ-globulin, and glucose contained in the control serum IIB (CS IIB) solutions with various concentrations. SCMWPLS is proposed to search for the optimized combinations of informative regions, which are spectral intervals, considered containing useful information for building partial least squares (PLS) models. The informative regions can easily be found by moving window partial least squares regression (MWPLSR) method. PLS calibration models using the regions obtained by SCMWPLS were developed for HSA, γ-globulin, and glucose. These models showed good prediction with the smallest root mean square error of predictions (RMSEP), the relatively small number of PLS factors, and the highest correlation coefficients among the results achieved by using whole region and MWPLSR methods. The RMSEP values of HSA, γ-globulin, and glucose yielded by SCMWPLS were 0.0303, 0.0327, and 0.0195 g/dl, respectively. These results prove that SCMWPLS can be successfully applied to determine simultaneously the concentrations of HSA, γ-globulin, and glucose in complicated biological fluids such as CS IIB solutions by using NIR spectroscopy.     

Rapid Measurement of Cellulose,Hemicellulose, and Lignin Content in Sargassum horneri by Near-Infrared Spectroscopy and Characteristic Variables Selection Methods

Near-infrared (NIR) spectroscopy and characteristic variables selection methods were used to develop a quick method for the determination of cellulose, hemicellulose, and lignin contents in Sargassum horneri. Calibration models for cellulose, hemicellulose, and lignin in Sargassum horneri were established using partial least square regression methods with full variables (full-PLSR). The PLSR calibration models were established by four characteristic variables selection methods, including interval partial least square (iPLS), competitive adaptive reweighted sampling (CARS), correlation coefficient (CC), and genetic algorithm (GA). The results showed that the performance of the four calibration models, namely iPLS-PLSR, CARS-PLSR, CC-PLSR, and GA-PLSR, was better than the full-PLSR calibration model. The iPLS method was best in the performance of the models. For iPLS-PLSR, the determination coefficient (R²), root mean square error (RMSE), and residual predictive deviation (RPD) of the prediction set were as follows: 0.8955, 0.8232%, and 3.0934 for cellulose, 0.8669, 0.4697%, and 2.7406 for hemicellulose, and 0.7307, 0.7533%, and 1.9272 for lignin, respectively. These findings indicate that the NIR calibration models can be used to predict cellulose, hemicellulose, and lignin contents in Sargassum horneri quickly and accurately.     

啤酒主要成分的近红外光谱法测定

根据近红外光谱的振动吸收强度与有机分子官能团含量的线性关系,用偏最小二乘法,对啤酒的近红外光谱与其中的酒精度、原麦汁浓度以及总酸含量等3种主要成分进行了线性回归,并建立起相关的模型。用该模型对未知啤酒样品中的上述3种成分的含量进行预测,取得了令人非常满意的结果。可望作为啤酒厂的一种快捷而准确的检测方法予以推广。     

Genetic Algorithm Applied to Selection of Wavelength in Partial Least Squares for Simultaneous Spectrophotometric Determination of Nitrophenol Isomers

Abstract

Ternary mixtures of nitrophenol isomers have been simultaneously determined in synthetic and real matrix by application of genetic algorithm and partial least squares model. All factors affecting the sensitivity were optimized and the linear dynamic range for determination of nitrophenol isomers found. The simultaneous determination of nitrophenol mixtures by using spectrophotometric methods is a difficult problem, due to spectral interferences. The partial least squares modeling was used for the multivariate calibration of the spectrophotometric data. A genetic algorithm is a suitable method for selecting wavelength for PLS calibration of mixtures with almost identical spectra without loss prediction capacity. The experimental calibration matrix was designed by measuring the absorbance over the range 300–520 nm for 21 samples of 1–20 µg mL^?1, 1–20 µg mL^?1, and 1–10 µg mL^?1 of m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol, respectively. The root mean square error of prediction for m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol with genetic algorithms and without genetic algorithms were 0.3732, 0.5997, 0.3181 and 0.7309, 0.9961, 1.0055, respectively. The proposed method was successfully applied for the determination of m‐nitrophenol, o‐nitrophenol, and p‐nitrophenol in synthetic and water samples.     

Comparison of Different PLS Algorithms for Simultaneous Determination of Cd(II), Cu(II), Pb(II), and Zn(II) by Anodic Stripping Voltammetry at Bismuth Film Electrode

In this work we evaluated the use of different variable selection techniques combined with partial least‐squares regression (PLS) – genetic algorithm PLS (GA‐PLS), interval PLS (iPLS), and synergy interval PLS (siPLS) – in the simultaneous determination of Cd(II), Cu(II), Pb(II) and Zn(II) by anodic stripping voltammetry at a bismuth film. Generally, variable selection provided an improvement in prediction results when compared to full‐voltammogram PLS. The use of interval selection based algorithms have shown to be most adequate than the selection of discrete variables by GA. Excellent analytical performances were obtained despite the inherent complexity of the simultaneous determination.     

Selective removal of interference signals for near-infrared spectra of biomedical samples by using region orthogonal signal correction

New approach for chemometrics algorithm named region orthogonal signal correction (ROSC) has been introduced to improve the predictive ability of PLS models for biomedical components in blood serum developed from their NIR spectra in the 1280-1849 nm region. Firstly, a moving window partial least squares regression (MWPLSR) method was employed to locate the region due to water as a region of interference signals and to find the informative regions of glucose, albumin, cholesterol and triglyceride from NIR spectra of bovine serum samples. Next, a novel chemometrics method named searching combination moving window partial least squares (SCMWPLS) was used to optimize those informative regions. Then, the specific regions that contained the information of water, glucose, albumin, cholesterol and triglyceride were obtained. When an interested component in the bovine serum solution, such as glucose, albumin, cholesterol or triglyceride is being an analyte, the other three interests and water are considered as the interference factors. Thus, new approach for ROSC has employed for each specific region of interference signal to calculate the orthogonal components to the concentrations of analyte that were removed specifically from the NIR spectra of bovine serum in the region of 1280-1849 nm and the highest interference signal for model of analyte will be revealed. The comparison of PLS results for glucose, albumin, cholesterol and triglyceride built by using the whole region of original spectra and those developed by using the optimized regions suggested by SCMWPLS of original spectra, spectra treated OSC for orthogonal components of 1-3 and spectra treated ROSC using selected removing the highest interference signals from the spectra for orthogonal components of 1-3 are reported. It has been found that new approach of ROSC to remove the highest interference signal located by SCMWPLS improves of the performance of PLS modeling, yielding the lower RMSECV and smaller number of PLS factors.     

近红外光谱与组合的间隔偏最小二乘法测定清开灵四混液中总氮和栀子苷的含量

应用近红外光谱分析技术结合化学计量学方法, 建立了中药清开灵注射液中间体总氮和栀子苷含量测定的新方法. 首先采用Kernard-Stone法对训练集样本和预测集样品进行分类, 然后应用组合的间隔偏最小二乘法(Synergy interval partial least squares, siPLS)对所得近红外透射光谱进行有效谱段范围的选择以及二者定量校正模型的建立, 并对光谱预处理方法进行了详细的讨论. 所建立的总氮和栀子苷校正模型的预测相关系数(R)分别为0.999和0.708; 交叉验证误差均方根(RMSECV)均为0.023; 预测误差均方根(RMSEP)分别为0.074和0.159; 预测结果表明, 本实验所建方法快速、无损且可靠, 可推广并应用于中药注射液中间体的在线质量控制.     

近红外光谱法在红曲菌固态发酵过程参数检测中的应用

研究了近红外光谱技术快速检测红曲菌固态发酵过程参数水分含量和pH值的可行性。针对传统基于间隔策略波长选择方法忽略非线性因素的缺点,采用一种基于最小二乘支持向量机(Least squares support vector machines,LS-SVM)非线性模型的波长筛选算法：联合区间最小二乘支持向量机(Synergy interval least squares support vector machines,siLS-SVM),并将新算法与相关系数法、iPLS算法、siPLS算法对比。实验结果显示,联合siLS-SVM算法和LS-SVM模型取得了最好的预测效果,水分含量、pH值的预测集相关系数(Rp)分别为0.962 1、0.976 1,预测均方根误差(RMSEP)分别为0.012 9、0.145 2,表明模型具有较好的拟合度和预测性能。应用近红外光谱法进行红曲菌固态发酵过程的水分含量和pH值的快速检测可行,该方法为进一步实现其过程参数的在线检测及发酵条件优化提供了技术基础。     

Characterization of a Stable Adaptive Calibration Model Using Near-Infrared Spectroscopy and Partial Least Squares with a Kalman Filter

The calibration model of near-infrared (NIR) spectra established using the Kalman filter-partial least square (partial least squares combined with a Kalman filter) method can be adapted to outdated equipment, environmental changes, external samples, and other applications. However, the variance of the measurement noise estimation for NIR spectrum measurements cannot be easily obtained using Kalman filter-partial least squares; therefore, the variance in the measurement noise is often assumed to be zero for the Kalman filter-partial least square calibration model, which affects the stability of the model. In this study, the measured input and output data were used effectively, and the gamma test method for estimating the measurement noise variance was used to improve the stability of the Kalman filter-partial least square calibration model. First, an accurate estimation of the measurement noise variance was obtained, and accurate modeling was then performed using Kalman filter-partial least squares. Finally, 600 abandoned drilling fluid samples were used to confirm the validity of the proposed method. The Kalman filter-partial least square and gamma test-Kalman filter-partial least square methods are compared. Testing of external samples 401–600 demonstrated that the stability of the Kalman filter-partial least square model decreased. The root mean square error of the prediction of the Kalman filter-partial least square model was 27.135, which was worse than that of the gamma test-Kalman filter-partial least square model (20.307). The validation results show that the proposed method has better stability in tracking the evolution of the NIR spectrometer’s measurement state.     

CCD近红外光谱分析技术在测定红烟硝酸中的应用

从化学计量学角度研究了CCD近红外光谱技术在无机物领域分析中的应用。使用偏最小二乘法(PLS)建立了红烟硝酸的密度、水分含量等五项指标的快速测定模型,验证了近红外光谱测定红烟硝酸各项指标的可靠性。试验证明,CCD近红外光谱方法具有重现性好、分析速度快、使用样品量少、可以在线分析等优点,可以用于无机物的常规分析。     

Quantitative Analysis of Catalpol in Chinese Patent Medicine Lixin Pill by Near-infrared Diffuse Reflectance Spectroscopy

Lixin pill is a typical Chinese patent medicine with anti-rheumatic heart disease activity that has been widely used in clinical practice. Therefore it is very important to detect the concentration of catalpol, as the main component of the active ingredient. Near-infrared reflectance（NIR） spectroscopy was used to study the content of catalpol in the unprocessed Chinese patent medicine of Lixin pills. NIR is applied to quantitatively analyze 77 sam- ples, which were randomly divided into a calibration set containing 61 samples and a prediction set containing 16 samples. To get a satisfying result, partial least squares（PLS） regression was utilized to establish quantitative models. In PLS regression, the values of coefficient of determination（R2） and root mean square error of cross-validation （RMSECV） of PLS regression are 0.9419 and 0.0216, respectively. The process of establishing model, parameters of model, and prediction results were also discussed in detail（root mean square error of prediction is 0.0164）. The over- all results show that NIR spectroscopy can be efficiently utilized for the rapid and accurate analysis of routine chemical compositions in the Chinese patent medicine of Lixin pills. The prediction set suggests that this quantitative analysis model has excellent generalization ability and prediction precision. Accordingly, the result can provide tech- nical support for the further analysis of catalpol in unprocessed Lixin pill. Moreover, this study supplied technical support for the further analysis of other Chinese patent medicine samples.